CXV34-MIB
18 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxV34 SapIndex |
| RFC-1212 | OBJECT-TYPE |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.42.1 | Tablev34SlotTable | not-accessible | mandatory | Describes a table that contains configuration information about each V34 modem and its associated hardware port. |
| 1.3.6.1.4.1.495.2.1.6.42.1.1 | Rowv34SlotEntry | not-accessible | mandatory | Describes the configuration information applied to a specific V34 modem and its associated hardware port. |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.1 | Columnv34SlotNumber | read-only | mandatory | Identifies a numerical value applied to the modem. Each device has a unique number. |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.2 | Columnv34SlotAlias | read-write | mandatory | Assigns a name used for the alias. Each modem requires a unique name. You may not assign the same name twice. Default Value: none Range of Values: Up to twelve… |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.3 | Columnv34SlotRowStatus | read-write | mandatory | Determines the status of the objects in in a table row. Default Value: none Options: invalid (1): row is flagged, after next reset the values will be disabled … |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.4 | Columnv34SlotStatus | read-only | mandatory | Identifies the presence or absence of a V.34 modem in the slot and if present, whether it has failed initialization. Default Value: none Options: v34-not-prese… |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.5 | Columnv34SlotModemString | read-write | mandatory | Determines a string to be sent to the modem upon initialization. Default Value: none Range of Values: 0-32 alphanumberic characters Configuration Changed: admi… |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.6 | Columnv34SlotDialNumber | read-write | mandatory | Specifies the number used to dial the remote modem. Default Value: none Range of Values: An octet string of 12 numeric characters Configuration Changed: admini… |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.7 | Columnv34SlotAnswerMode | read-write | mandatory | Determines whether the device will answer an incoming call. Default Value: answer-enabled (2) Options: answer-disabled (1) answer-enabled (2) test-mode (3) Con… |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.8 | Columnv34SlotSpeedStatus | read-only | mandatory | Identifies the connection rate operative during the current dial call only. Default Value: none Options: speed-0-300 (1) speed-600 (2) speed-1200 (3) speed-240… |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.9 | Columnv34SlotRetrainStatus | read-only | mandatory | Identifies whether the modem is retraining or not. It is only applicable while the modem is on-line. Default Value: none Options: no-retraining (1) retraining … |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.10 | Columnv34SlotHookStatus | read-only | mandatory | Identifies whether the modem is 'off-hook' (connected to the telephone line), or 'on-hook' (disconnected). Default Value: none Options: on-hook (1) off-hook (2) |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.11 | Columnv34SlotRingStatus | read-only | mandatory | Identifies when the modem detects a ring signal from the telephone line. Default Value: none Options: no-ring (1) ring (2) |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.12 | Columnv34SlotDsrStatus | read-only | mandatory | Identifies the data transfer state of the modem by the status of the Data Set Ready (DSR) signal . Default Value: none Options dsr-deasserted (1): data transfe… |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.13 | Columnv34SlotDtrStatus | read-only | mandatory | Identifies the status of the Data Terminal Ready (DTR) signal that the motherboard uses to dial the pre-stored phone number (if in originate mode) or to enable… |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.14 | Columnv34SlotModel | read-only | mandatory | Identifies the model number of the Printed Circuit Board (PCB) as an integer value from 0 to 7. Default Value: none Range of Values: 0-7 |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.15 | Columnv34SlotRevision | read-only | mandatory | Identifies the revision number of the PCB as an integer value from 0 to 15. Default Value: none Range of Values: 0-15 |
| 1.3.6.1.4.1.495.2.1.6.42.1.1.16 | Columnv34SlotEco | read-only | mandatory | Identifies the Engineering Change Order (ECO) level of the PCB as an integer value from 0 to 15. Default Value: none Range of Values: 0-15 |