DOCS-EQAM-MIB
158 objects
This MIB module contains the EQAM management requirements.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.24 | IdentitydocsEqamMib | This MIB module contains the EQAM management requirements. | ||
| 1.3.6.1.4.1.4491.2.1.24.0 | NodedocsEqamNotifications | |||
| 1.3.6.1.4.1.4491.2.1.24.0.1 | NodedocsEqamNotificationObjects | |||
| 1.3.6.1.4.1.4491.2.1.24.0.1.1 | ScalardocsEqamNotifyMgmtInetAddressType | accessible-for-notify | current | This attribute represents the address type of the EQAM management IP address. |
| 1.3.6.1.4.1.4491.2.1.24.0.1.2 | ScalardocsEqamNotifyMgmtInetAddress | accessible-for-notify | current | This attribute represents the EQAM management IP address, or the FQDN if DNS is supported . |
| 1.3.6.1.4.1.4491.2.1.24.0.2 | NotificationdocsEqamNotify | current | This object corresponds to a generic notification used by the EQAM to send events. This notification sends additional information about the as follows. - docsD… | |
| 1.3.6.1.4.1.4491.2.1.24.1 | NodedocsEqamObjects | |||
| 1.3.6.1.4.1.4491.2.1.24.1.1 | NodedocsEqamControl | |||
| 1.3.6.1.4.1.4491.2.1.24.1.1.1 | ScalardocsEqamControlReset | read-write | current | This attribute controls the administrative reset of the EQAM device. If set to 'true' the EQAM is reinitialized. This attribute always report the value 'reset'… |
| 1.3.6.1.4.1.4491.2.1.24.1.1.2 | ScalardocsEqamControlInitCause | read-only | current | This attribute indicates the reason for the last reinitialization. |
| 1.3.6.1.4.1.4491.2.1.24.1.1.3 | ScalardocsEqamControlSaveCfg | read-write | current | This attribute provides a mechanism to save the current EQAM configuration in the EQAM file system. A set to a non-zero length string representing a valid loca… |
| 1.3.6.1.4.1.4491.2.1.24.1.1.4 | ScalardocsEqamControlUploadCfg | read-write | current | This attribute provides a mechanism to upload the EQAM config file to the configuration server. When set to a URI, the EQAM performs an upload of the current c… |
| 1.3.6.1.4.1.4491.2.1.24.1.2 | NodedocsEqamTime | |||
| 1.3.6.1.4.1.4491.2.1.24.1.2.1 | ScalardocsEqamTimeNtpMaster | read-write | current | This attribute represents the Master NTP server. This element is not required in case ToD is acquired via DHCP. If DHCP options for ToD are provided and this e… |
| 1.3.6.1.4.1.4491.2.1.24.1.2.2 | ScalardocsEqamTimeNtpBackup | read-write | current | This attribute represents the backup NTP Server in case the master NTP fails. |
| 1.3.6.1.4.1.4491.2.1.24.1.2.3 | ScalardocsEqamTimeTimeZone | read-write | current | This attribute represents the offset value to the local time to arrive at UTC Time. The value has the following format: hh[:mm] The hour (0 <= hh <= 24) is req… |
| 1.3.6.1.4.1.4491.2.1.24.1.2.4 | ScalardocsEqamTimeDaylightSaving | read-write | current | This attribute indicates when to change to and from daylight saving (or summer) time. The value has the form: date1/time1,date2/time2,offset The first date des… |
| 1.3.6.1.4.1.4491.2.1.24.1.3 | TabledocsEqamSyslogServerTable | not-accessible | current | This object represents the syslog server's configuration. |
| 1.3.6.1.4.1.4491.2.1.24.1.3.1 | RowdocsEqamSyslogServerEntry | not-accessible | current | The Conceptual row of docsEqamSyslogServerTable |
| 1.3.6.1.4.1.4491.2.1.24.1.3.1.1 | ColumndocsEqamSyslogServerIndex | not-accessible | current | This key represents the unique identifier of an instance in this object. |
| 1.3.6.1.4.1.4491.2.1.24.1.3.1.2 | ColumndocsEqamSyslogServerInetAddressType | read-create | current | This attribute indicates the address type of the syslog server IP address. 'dns' support is optional. |
| 1.3.6.1.4.1.4491.2.1.24.1.3.1.3 | ColumndocsEqamSyslogServerInetAddress | read-create | current | This attribute represents the IP address of the syslog server. If DNS is supported, this attribute can contain the FQDN of the syslog server. |
| 1.3.6.1.4.1.4491.2.1.24.1.3.1.4 | ColumndocsEqamSyslogServerEnabled | read-create | current | Indicates if the syslog server is user for sending syslog messages or is disabled. |
| 1.3.6.1.4.1.4491.2.1.24.1.3.1.5 | ColumndocsEqamSyslogRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.4 | TabledocsEqamRegistrationTable | not-accessible | current | This object represents the configuration of the ERRP protocol. |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1 | RowdocsEqamRegistrationEntry | not-accessible | current | The Conceptual row of docsEqamRegistrationTable |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.1 | ColumndocsEqamRegistrationErmName | not-accessible | current | This key represents the name of the ERM related to this registration instance. This is an internal reference for associating e.g. QAM channels and input interf… |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.2 | ColumndocsEqamRegistrationErmAddressType | read-create | current | This attribute represents the InetAddress of the ERM. |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.3 | ColumndocsEqamRegistrationErmAddress | read-create | current | This attribute represents the IP Address of the ERM |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.4 | ColumndocsEqamRegistrationErmPort | read-create | current | This attribute represents the TCP port number used to reach the ERM. |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.5 | ColumndocsEqamRegistrationErmConnectionType | read-create | current | This attribute represents the type of TCP connection that must be supported by the EQAM. The value can be one of the following: 'client' indicates that the EQA… |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.6 | ColumndocsEqamRegistrationHoldTimer | read-create | current | This attribute represents the number of seconds that the sender proposes for the value of the hold timer. Upon receipt of an OPEN message, the EQAM MUST calcul… |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.7 | ColumndocsEqamRegistrationConnRetryTimer | read-create | current | This attribute represents the time in seconds for the connect retry timer. The exact value of the connect retry timer is a local matter, but should be sufficie… |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.8 | ColumndocsEqamRegistrationNexthopAddressDomain | read-create | current | This attribute represents the address domain number of the next-hop server. The NextHopServer specifies the address to which a manager should use to connect to… |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.9 | ColumndocsEqamRegistrationCompAddress | read-create | current | This attribute represents the ERRP NextHopServer attribute. This field contains a string that conforms to the following syntax: CompAddress = host[:port] host … |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.10 | ColumndocsEqamRegistrationStreamingZone | read-create | current | This attribute represents the Streaming Zone within which the component operates. This parameter is used in the ERRP OPEN message. StreamingZone Name is a mand… |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.11 | ColumndocsEqamRegistrationId | read-create | current | This attribute represents the unique identifier for the EQAM device within its Streaming Zone. This value may be set to the 4-octet value of an IPv4 address as… |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.12 | ColumndocsEqamRegistrationCost | read-create | current | This attribute represents the static cost for use of this resource. |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.13 | ColumndocsEqamRegistrationCompName | read-create | current | The name of the component for which the data in the update message applies. This parameter is used in the ERRP OPEN message. Component Name is a mandatory para… |
| 1.3.6.1.4.1.4491.2.1.24.1.4.1.14 | ColumndocsEqamRegistrationRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.5 | NodedocsEqamTSInputCfg | |||
| 1.3.6.1.4.1.4491.2.1.24.1.5.1 | ScalardocsEqamTSInputCfgUnicastSessionLossTimeout | read-write | current | This attribute represents the loss of signal timeout in milliseconds for unicast input streams. See SCTE-154-4 mpegLossOfSignalTimeout. |
| 1.3.6.1.4.1.4491.2.1.24.1.5.2 | ScalardocsEqamTSInputCfgMulticastSessionLossTimeout | read-write | current | This attribute represents the loss of signal timeout in milliseconds for the multicast input streams. |
| 1.3.6.1.4.1.4491.2.1.24.1.5.3 | ScalardocsEqamTSInputCfgJitterTolerance | read-write | current | This attribute represents the acceptable delay variation in millisecond for incoming streams. The jitter option sets the size of a dejittering buffer that abso… |
| 1.3.6.1.4.1.4491.2.1.24.1.6 | NodedocsEqamTSOutputCfg | |||
| 1.3.6.1.4.1.4491.2.1.24.1.6.1 | ScalardocsEqamTSOutputCfgCatInsertRate | read-write | current | This attribute represents the CAT insertion rate expressed in tables/second (See SCTE-154-4 mpegOutputTSCatInsertRate). |
| 1.3.6.1.4.1.4491.2.1.24.1.6.2 | ScalardocsEqamTSOutputCfgPatInsertRate | read-write | current | This attribute represents the PAT table interval expressed in tables/second (See SCTe-154-4 mpegOutputTSPatInsertRate). |
| 1.3.6.1.4.1.4491.2.1.24.1.6.3 | ScalardocsEqamTSOutputCfgPmtInsertRate | read-write | current | This attribute represents the PMT table interval expressed in tables/second (See SCTE-154-4 mpegOutputTSPatInsertRate). |
| 1.3.6.1.4.1.4491.2.1.24.1.7 | TabledocsEqamReservedUdpMapTable | not-accessible | current | This object represents reserved ports to be used for non-video applications. |
| 1.3.6.1.4.1.4491.2.1.24.1.7.1 | RowdocsEqamReservedUdpMapEntry | not-accessible | current | The Conceptual row of docsEqamReservedUdpMapTable |
| 1.3.6.1.4.1.4491.2.1.24.1.7.1.1 | ColumndocsEqamReservedUdpMapIndex | not-accessible | current | This key represents the unique identifier of an instance in this object. |
| 1.3.6.1.4.1.4491.2.1.24.1.7.1.2 | ColumndocsEqamReservedUdpMapStartingPort | read-create | current | This attribute represents the port range start value for non-video applications reserved UDP ports. |
| 1.3.6.1.4.1.4491.2.1.24.1.7.1.3 | ColumndocsEqamReservedUdpMapCount | read-create | current | This attribute represents the number of reserved UDP ports starting from 'StartingPort' attribute value. |
| 1.3.6.1.4.1.4491.2.1.24.1.7.1.4 | ColumndocsEqamReservedUdpMapRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.8 | TabledocsEqamReservedPidRangeTable | not-accessible | current | This object represents reserved PID range to not be used on ERM assignments. |
| 1.3.6.1.4.1.4491.2.1.24.1.8.1 | RowdocsEqamReservedPidRangeEntry | not-accessible | current | The Conceptual row of docsEqamReservedPidRangeTable |
| 1.3.6.1.4.1.4491.2.1.24.1.8.1.1 | ColumndocsEqamReservedPidRangeIndex | not-accessible | current | This key represents the unique identifier of an instance in this object. |
| 1.3.6.1.4.1.4491.2.1.24.1.8.1.2 | ColumndocsEqamReservedPidRangeStartingPid | read-create | current | This attribute represents the PID range starts for other applications reserved PIDs. |
| 1.3.6.1.4.1.4491.2.1.24.1.8.1.3 | ColumndocsEqamReservedPidRangeCount | read-create | current | This attribute represents the number of reserved PIDs starting from 'StartingPid' attribute value. |
| 1.3.6.1.4.1.4491.2.1.24.1.8.1.4 | ColumndocsEqamReservedPidRangeDescription | read-create | current | This attribute represents the description associated with a PID range configured instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.8.1.5 | ColumndocsEqamReservedPidRangeRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.9 | NodedocsEqamDEPICfg | |||
| 1.3.6.1.4.1.4491.2.1.24.1.9.1 | ScalardocsEqamDEPICfgDepiSessionLossTO | read-write | current | This attribute indicates the Timeout in seconds the EQAM waits after a QAM channel session is terminated to advertize the QAM channel as idle to the ERM. This … |
| 1.3.6.1.4.1.4491.2.1.24.1.10 | TabledocsEqamEdgeInputTable | not-accessible | current | This object represents the configuration of Input Edge parameters. |
| 1.3.6.1.4.1.4491.2.1.24.1.10.1 | RowdocsEqamEdgeInputEntry | not-accessible | current | The Conceptual row of docsEqamEdgeInputTable |
| 1.3.6.1.4.1.4491.2.1.24.1.10.1.1 | ColumndocsEqamEdgeInputName | not-accessible | current | This key represents the Input interface name. This name corresponds to the RFC4133, ENTITY-MIB entPhysicalName. |
| 1.3.6.1.4.1.4491.2.1.24.1.10.1.2 | ColumndocsEqamEdgeInputInetAddressType | read-create | current | This attribute represents the IP address type of the 'IpAddress' attribute. |
| 1.3.6.1.4.1.4491.2.1.24.1.10.1.3 | ColumndocsEqamEdgeInputInetAddress | read-create | current | This attribute represents the IP address of the Edge interface. If not included, the EQAM should use DHCP to acquire the IP address of the Edge input interface. |
| 1.3.6.1.4.1.4491.2.1.24.1.10.1.4 | ColumndocsEqamEdgeInputRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.11 | TabledocsEqamInputRegistrationTable | not-accessible | current | This object represents the configuration of Edge ERRP parameters. |
| 1.3.6.1.4.1.4491.2.1.24.1.11.1 | RowdocsEqamInputRegistrationEntry | not-accessible | current | The Conceptual row of docsEqamInputRegistrationTable |
| 1.3.6.1.4.1.4491.2.1.24.1.11.1.1 | ColumndocsEqamInputRegistrationGroupName | read-create | current | This attribute represents the name of the Edge Input Group associated with this input. This parameter is used in the ERRP Edge Input attribute. |
| 1.3.6.1.4.1.4491.2.1.24.1.11.1.2 | ColumndocsEqamInputRegistrationBandwidth | read-create | current | This attribute represents the bandwidth of the edge input to be advertized. If zero or not present, the EQAM advertize the full bandwidth of the edge input. |
| 1.3.6.1.4.1.4491.2.1.24.1.11.1.3 | ColumndocsEqamInputRegistrationErmName | read-create | current | This attribute represents the ERM where the QAM channel is advertised. If empty, the QAM channel is not advertized. |
| 1.3.6.1.4.1.4491.2.1.24.1.11.1.4 | ColumndocsEqamInputRegistrationRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.12 | TabledocsEqamRFPortTable | not-accessible | current | This object represents the configuration of RF ports. The parameters configured in a RF port applies to all the QAM channels within the RF Port, unless explici… |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1 | RowdocsEqamRFPortEntry | not-accessible | current | The Conceptual row of docsEqamRFPortTable |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.1 | ColumndocsEqamRFPortName | not-accessible | current | This key represents the RF port identifier. It corresponds to RFC4133, ENTITY-MIB entPhysicalName. |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.2 | ColumndocsEqamRFPortAdminStatus | read-only | current | This attribute represents the administrative state of the RF Port. Setting this element to 'disable' results in the RF port being muted. By default this elemen… |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.3 | ColumndocsEqamRFPortPower | read-create | current | This attribute represents the power level for the QAM channels in the containment level. |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.4 | ColumndocsEqamRFPortFrequency | read-create | current | This attribute represents the first carrier of the configured carriers within the RF port. |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.5 | ColumndocsEqamRFPortModulation | read-create | current | This attribute represents the Modulation type for the QAM channels in the containment level. |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.6 | ColumndocsEqamRFPortInterleaverMode | read-create | current | This attribute represents the Interleave mode for the QAM channels in the containment level. |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.7 | ColumndocsEqamRFPortInterleaveLevel | read-create | current | This attribute represents the interleaver level for FEC coding for the QAM channels in the containment level. |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.8 | ColumndocsEqamRFPortAnnex | read-create | current | This attribute represents the ITU J.83 Annex mode for the QAM channels in the containment level. |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.9 | ColumndocsEqamRFPortSpectrumInversion | read-create | current | This attribute represents the QAM Signal Spectrum inversion. A value 'true' indicates channel spectrum is inverted. |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.10 | ColumndocsEqamRFPortLockParameters | read-only | current | This attribute represents the PHY parameters Lock state of the QAM channels n the RF Port containment level for DEPI initiated PHY parameters updates. This par… |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.11 | ColumndocsEqamRFPortcfgNumberChannels | read-create | current | This attribute represents the number of QAM channels to configure in the channel block. By default all the channels in the RF port are condigured. |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.13 | ColumndocsEqamRFPortNumberChannels | read-only | current | This attribute indicates the total number of QAM channels within the RF. |
| 1.3.6.1.4.1.4491.2.1.24.1.12.1.14 | ColumndocsEqamRFPortRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.13 | TabledocsEqamFiberNodeTable | not-accessible | current | This object represents the list of Fiber Nodes the RF port reaches. |
| 1.3.6.1.4.1.4491.2.1.24.1.13.1 | RowdocsEqamFiberNodeEntry | not-accessible | current | The Conceptual row of docsEqamFiberNodeTable |
| 1.3.6.1.4.1.4491.2.1.24.1.13.1.1 | ColumndocsEqamFiberNodeName | read-create | current | This attribute represents the Fiber Node Name associated with the RF Port |
| 1.3.6.1.4.1.4491.2.1.24.1.13.1.2 | ColumndocsEqamFiberNodeRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.14 | TabledocsEqamChannelTable | not-accessible | current | This object represents the configuration of QAM channels. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1 | RowdocsEqamChannelEntry | not-accessible | current | The Conceptual row of docsEqamChannelTable |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.1 | ColumndocsEqamChannelPhysName | not-accessible | current | This key represents the QAM channel identifier. It corresponds to RFC4133, ENTITY-MIB entPhysicalName. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.2 | ColumndocsEqamChannelRFPortPhysName | read-create | current | This attribute represents the RF port identifier of the QAM channel. It corresponds to RFC4133, ENTITY-MIB entPhysicalName. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.3 | ColumndocsEqamChannelAdminStatus | read-create | current | This attribute represents the administrative state of the QAM channel. Setting this element to 'disable' results in the RF port being muted. By default this el… |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.4 | ColumndocsEqamChannelPower | read-create | current | This attribute represents the power level for the QAM channel |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.5 | ColumndocsEqamChannelFrequency | read-create | current | This attribute represents the carrier frequency of the QAM channel. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.6 | ColumndocsEqamChannelModulation | read-create | current | This attribute represents the Modulation type for the QAM channel. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.7 | ColumndocsEqamChannelInterleaverMode | read-create | current | This attribute represents the Interleave mode of the QAM channel. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.8 | ColumndocsEqamChannelInterleaverLevel | read-create | current | This attribute represents the interleaver level for FEC coding of the QAM channel. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.9 | ColumndocsEqamChannelAnnex | read-create | current | This attribute represents the ITU J.83 Annex mode of the QAM channel. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.10 | ColumndocsEqamChannelSpectrumInversion | read-create | current | This attribute represents the QAM Signal Spectrum inversion. A value 'true' indicates channel spectrum is inverted. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.11 | ColumndocsEqamChannelName | read-create | current | This attribute represents the name of the QAM channel. This parameter is used in the ERRP QAM Name attribute. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.12 | ColumndocsEqamChannelGroupName | read-create | current | This attribute represents the address field in the WithdrawnRoute and ReachableRoutes ERRP attributes. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.13 | ColumndocsEqamChannelErmName | read-create | current | This attribute represents the ERM where the QAM channel is advertised. If empty, the QAM channel is not advertized. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.14 | ColumndocsEqamChannelLockParameters | read-create | current | This attribute represents the PHY parameters Lock state of the QAM channels for DEPI initiated PHY parameters updates. This parameter is only required for M-CM… |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.15 | ColumndocsEqamChannelAllocationType | read-create | current | This attribute indicates the mechanisms authorized to reserve and control the QAM channels. The possible values are: 'docsisOnly': the QAM channel can be alloc… |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.16 | ColumndocsEqamChannelERRPAdvertizing | read-create | current | CM This attribute represents the ERRP advertisement state of the QAM channe. If set to 'true' the QAM channel is advertised, otherwise is not advertised. This … |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.17 | ColumndocsEqamChannelDepiUdpPortMapping | read-create | current | This attribute represents the static UDP port assignment for a DEPI UDP tunnel. The value zero indicates there is not static mapping or not applicable. |
| 1.3.6.1.4.1.4491.2.1.24.1.14.1.18 | ColumndocsEqamChannelRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.15 | TabledocsEqamTSOutputTable | not-accessible | current | This object represent transport stream configuration parameters for QAM channels. |
| 1.3.6.1.4.1.4491.2.1.24.1.15.1 | RowdocsEqamTSOutputEntry | not-accessible | current | The Conceptual row of docsEqamTSOutputTable |
| 1.3.6.1.4.1.4491.2.1.24.1.15.1.1 | ColumndocsEqamTSOutputTSID | read-create | current | This attribute represents the TSID of the output transport stream. See SCTE-154-4 mpegOutputTSTSID. |
| 1.3.6.1.4.1.4491.2.1.24.1.15.1.2 | ColumndocsEqamTSOutputNitPid | read-create | current | This attribute represents the NIT PID of the outgoing transport stream. See SCTE-154-4 mpegOutputTSNitPid. |
| 1.3.6.1.4.1.4491.2.1.24.1.15.1.3 | ColumndocsEqamTSOutputCaPid | read-create | current | This attribute represents the CA PID of the outgoing transport stream. See SCTE-154-4 mpegOutputTSCaPid. |
| 1.3.6.1.4.1.4491.2.1.24.1.15.1.4 | ColumndocsEqamTSOutputRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.16 | TabledocsEqamStaticUdpMapTable | not-accessible | current | This object represent the UDP port ranges used for static video sessions. |
| 1.3.6.1.4.1.4491.2.1.24.1.16.1 | RowdocsEqamStaticUdpMapEntry | not-accessible | current | The Conceptual row of docsEqamStaticUdpMapTable |
| 1.3.6.1.4.1.4491.2.1.24.1.16.1.1 | ColumndocsEqamStaticUdpMapStartingPort | read-create | current | This attribute represents the UDP port range start value for static session. |
| 1.3.6.1.4.1.4491.2.1.24.1.16.1.2 | ColumndocsEqamStaticUdpMapCount | read-create | current | This attribute represents the number of reserved UDP ports starting from 'StartingPort' attribute value. |
| 1.3.6.1.4.1.4491.2.1.24.1.16.1.3 | ColumndocsEqamStaticUdpMapRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.24.1.17 | NodedocsEqamSessionLogCtrl | |||
| 1.3.6.1.4.1.4491.2.1.24.1.17.1 | ScalardocsEqamSessionLogCtrlMaxSize | read-write | current | This attribute represents the maximum number of mpeg session entries that the 'SessionLog' can report. Upon a set operation, the lower value between the set va… |
| 1.3.6.1.4.1.4491.2.1.24.1.17.2 | ScalardocsEqamSessionLogCtrlCurrentSize | read-only | current | This attribute represents the current number of mpeg session entries in the 'SessionLog'. |
| 1.3.6.1.4.1.4491.2.1.24.1.17.3 | ScalardocsEqamSessionLogCtrlAging | read-write | current | This attribute represents the Aging threshold for the 'SessionLog'. Periodically, a process scans through 'SessionLog' and removes those sessions that have a '… |
| 1.3.6.1.4.1.4491.2.1.24.1.17.4 | ScalardocsEqamSessionLogCtrlClearAll | read-write | current | This attribute provides a control to clear the 'Session log'. If set to 'true', all entries from the 'SessionLog' object are removed. Reading this attribute al… |
| 1.3.6.1.4.1.4491.2.1.24.1.17.5 | ScalardocsEqamSessionLogCtrlType | read-write | current | This attribute indicates which type of videos sessions are reported in the 'SessionLog' object. The value 'allSessions' indicates all video sessions are report… |
| 1.3.6.1.4.1.4491.2.1.24.1.18 | TabledocsEqamSessionLogTable | not-accessible | current | This object represent the list of terminated MPEG video sessions. All parameters values reported for a session are determined at the time of the session deleti… |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1 | RowdocsEqamSessionLogEntry | not-accessible | current | The Conceptual row of docsEqamSessionLogTable |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.1 | ColumndocsEqamSessionLogIndex | not-accessible | current | This key represents the unique identifier of an instance in this object. This attribute's behavior consist of an incremental value. If the maximum number of in… |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.2 | ColumndocsEqamSessionLogId | read-only | current | This attribute identifies the MPEG Session Id of this entry. |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.3 | ColumndocsEqamSessionLogInputIfIndex | read-only | current | This attribute identifies the interface index of the mpeg source stream. |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.4 | ColumndocsEqamSessionLogOutputIfIndex | read-only | current | This attribute identifies the interface index of the mpeg output stream. |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.5 | ColumndocsEqamSessionLogInputContinuityErrors | read-only | current | This attribute indicates the total number of continuity counter errors for the session. See SCTE154-4 mpegInputStatsContinuityErrors for details of the count d… |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.6 | ColumndocsEqamSessionLogInputSyncLossPkts | read-only | current | This attribute indicates the total number of MPEG packets that had missing sync byte for the session. See SCTE 154-4 mpgInputStatsSyncLossPackets for details o… |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.7 | ColumndocsEqamSessionLogOutputTotalPkts | read-only | current | This atribute indicates the total number of MPEG output packets for the session. |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.8 | ColumndocsEqamSessionLogOutputDroppedPkts | read-only | current | This attribute indicates the total number of MPEG output packets dropped for the session. |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.9 | ColumndocsEqamSessionLogOutputFifoOverflow | read-only | current | This attribute indicates the total number of FIFO overflows of the session. |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.10 | ColumndocsEqamSessionLogOutputFifoUnderflow | read-only | current | This attribute indicates the total number of FIFO underflows of the session. |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.11 | ColumndocsEqamSessionLogMode | read-only | current | This attribute indicates the type of session. See SCTE 154-4 docsQamVideoSessionMode for definitions of the type of sessions. |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.12 | ColumndocsEqamSessionLogStartTime | read-only | current | This attribute indicates the date and time when the session was setup. |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.13 | ColumndocsEqamSessionLogStopTime | read-only | current | This attribute indicates the date and time when the session was deleted. |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.14 | ColumndocsEqamSessionLogInputAddrType | read-only | current | This attribute indicates the address type associated with the input transport stream of the session. The value 'unknown' indicates no IP transport associated t… |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.15 | ColumndocsEqamSessionLogInputSrcInetAddr | read-only | current | This attribute indicates the source address of the IP flow contained in the session. For Multicast it represents the Source Specific Multicast IP Address of th… |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.16 | ColumndocsEqamSessionLogInputSrcPort | read-only | current | This attribute indicates the source port of the UDP IP flow of the input transport stream. |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.17 | ColumndocsEqamSessionLogInputDstInetAddr | read-only | current | This attribute indicates the destination address of the IP flow contained in the session. For multicast it represents the group address of the SSM origination … |
| 1.3.6.1.4.1.4491.2.1.24.1.18.1.18 | ColumndocsEqamSessionLogInputDstPort | read-only | current | This attribute indicates the UDP destination port of the UDP IP flow of the input transport stream. |
| 1.3.6.1.4.1.4491.2.1.24.2 | NodedocsEqamMibConformance | |||
| 1.3.6.1.4.1.4491.2.1.24.2.1 | NodedocsEqamMibCompliances | |||
| 1.3.6.1.4.1.4491.2.1.24.2.1.1 | CompliancedocsEqamFullCompliance | current | The compliance statement for the full implementation of the MIB Module. | |
| 1.3.6.1.4.1.4491.2.1.24.2.1.2 | CompliancedocsEqamReadOnlyCompliance | current | The compliance statement for the read-only implementation of the MIB Module. | |
| 1.3.6.1.4.1.4491.2.1.24.2.2 | NodedocsEqamMibGroups | |||
| 1.3.6.1.4.1.4491.2.1.24.2.2.1 | GroupdocsEqamGroup | current | Group of objects for the full implementation of the MIB module. | |
| 1.3.6.1.4.1.4491.2.1.24.2.2.2 | GroupdocsEqamReadGroup | current | Group of objects for the read-only implementation of the MIB module. |