ERI-DNX-DS0-DP-MIB
37 objects
The ERI Enterprise MIB Module for the DNX DS0DP Device.
Imported Objects
| ERI-DNX-SMC-MIB | devices FunctionSwitch LinkPortAddress PortStatus trapSequence |
| ERI-ROOT-SMI | eriMibs |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.6 | NodednxDS0DP | |||
| 1.3.6.1.4.1.644.2.4.2.6.0 | IdentitydnxDS0DPEnterprise | current | ERI DNX DS0DP Enterprise for Alarms/Events | |
| 1.3.6.1.4.1.644.2.4.2.6.0.1 | Notificationds0DpPortConfigTrap | current | This trap is used to notify a NMS that a user has updated the Port configuration for a given DS0-DP Port entry. | |
| 1.3.6.1.4.1.644.2.4.2.6.0.2 | Notificationds0DpClockConfigTrap | current | This trap is used to notify a NMS that a user has updated the Clock configuration for the specified DS0-DP Device. | |
| 1.3.6.1.4.1.644.2.4.2.6.1 | Nodeds0DpConfig | |||
| 1.3.6.1.4.1.644.2.4.2.6.1.1 | Tableds0DpPortConfigTable | not-accessible | current | This is the DS0-DP Configuration table which consists of an entry for each of the DS0-DP card's 8 links (ports). The total number of entries depends on the num… |
| 1.3.6.1.4.1.644.2.4.2.6.1.1.1 | Rowds0DpPortConfigEntry | not-accessible | current | The conceptual row of the DS0-DP Port Configuration table. A row in this table cannot be added or deleted, only modified using the ds0DpCfgCmdStatus field with… |
| 1.3.6.1.4.1.644.2.4.2.6.1.1.1.1 | Columnds0DpCfgPortAddr | read-only | current | This number uniquely identifies a DS0-Dp Port resource. This number will be used throughout the system to identify a unique port. The format is represented usi… |
| 1.3.6.1.4.1.644.2.4.2.6.1.1.1.2 | Columnds0DpCfgResource | read-only | current | Uniquely identifies a DS0-DP port in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry. |
| 1.3.6.1.4.1.644.2.4.2.6.1.1.1.3 | Columnds0DpCfgPortName | read-write | current | This is the user-defined text name to identify the port. |
| 1.3.6.1.4.1.644.2.4.2.6.1.1.1.4 | Columnds0DpCfgStatus | read-write | current | Dictates the current status of the port, in-service or out-of-service. |
| 1.3.6.1.4.1.644.2.4.2.6.1.1.1.5 | Columnds0DpCfgRate | read-write | current | The DS0-DP port's configured transfer rate. |
| 1.3.6.1.4.1.644.2.4.2.6.1.1.1.6 | Columnds0DpCfgZeroCodeEnf | read-write | current | Determines the Zero Code Signal enforcement setting. |
| 1.3.6.1.4.1.644.2.4.2.6.1.1.1.7 | Columnds0DpCfgLoopDetect | read-write | current | Determines current Loop detection setting. A channel bank can turn certain loopback codes into a dropside loop or network loop, depending upon direction (local… |
| 1.3.6.1.4.1.644.2.4.2.6.1.1.1.8 | Columnds0DpCfgCmdStatus | read-write | current | The command status for this port configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.6.1.2 | Tableds0DpClockConfigTable | not-accessible | current | This is the DS0-DP Composite Clock Configuration table which consists of an entry for each DS0-DP card in the node. The total number of entries depends on the … |
| 1.3.6.1.4.1.644.2.4.2.6.1.2.1 | Rowds0DpClockConfigEntry | not-accessible | current | The conceptual row of the DS0-DP Composite Clock Configuration table. A row in this table cannot be added or deleted, only modified using the ds0DpCompClockCmd… |
| 1.3.6.1.4.1.644.2.4.2.6.1.2.1.1 | Columnds0DpCompClockAddr | read-only | current | This number uniquely identifies a DS0-DP Clock resource. This number will be used throughout the system to identify a unique port. The format is represented us… |
| 1.3.6.1.4.1.644.2.4.2.6.1.2.1.2 | Columnds0DpCompClockResource | read-only | current | Uniquely identifies a DS0-DP composite clock port in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resou… |
| 1.3.6.1.4.1.644.2.4.2.6.1.2.1.3 | Columnds0DpCompClockStatus | read-write | current | Displays current Composite Clock setting and allows user to enable or disable it. |
| 1.3.6.1.4.1.644.2.4.2.6.1.2.1.4 | Columnds0DpCompClockCmdStatus | read-write | current | The command status for this port configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.6.2 | Nodeds0DpDiag | |||
| 1.3.6.1.4.1.644.2.4.2.6.2.1 | Tableds0dpPortDiagTable | not-accessible | current | This is the DS0DP Port Diagnostic table which consists of a single entry for each card's Framer Display. The total number of entries depends on the number of D… |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1 | Rowds0dpPortDiagEntry | not-accessible | current | The conceptual row of the DS0DP Port table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.1 | Columnds0dpDiagAddr | read-only | current | This number uniquely identifies a DS0-Dp Port resource. This number will be used throughout the system to identify a unique port. The format is represented usi… |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.2 | Columnds0dpDiagResource | read-only | current | This number uniquely identifies a DS0DP Port resource. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table … |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.3 | Columnds0dpDiagState | read-only | current | Determines the current line condition status of the Port. ok (0) - No Alarm net-loop (8), - loopback code on the network side drop-loop (16), - loopback code o… |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.4 | Columnds0dpDiagErrSecs | read-only | current | This is the total number of errored seconds that have occurred since the port has been activated. |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.5 | Columnds0dpDiagDropLoop | read-write | current | Determines the current latching DS0 Dataport loopback code on the STP drop side (4 wire anolog side) for this port. In order to turn on a loop, the port must b… |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.6 | Columnds0dpDiagNetLoop | read-write | current | Determines the current latching DS0 Dataport loopback code on the network side (T1 digital line side) for this port. In order to turn on a loop, the port must … |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.7 | Columnds0dpDiagBertState | read-write | current | This indicates the current BERT test running and can be used to start and stop a desired Test Period. In order to turn on a bert, the port must be configured I… |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.8 | Columnds0dpDiagTestDuration | read-only | current | This the total number of seconds the test data has been collected. |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.9 | Columnds0dpDiagBertErrSecs | read-only | current | This is the total number of errored seconds that have occurred on the local port since the Test has been turned on. This Errored Second is defined as a one sec… |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.10 | Columnds0dpDiagBpvErrSecs | read-only | current | This is the number of seconds a Bi-polar violation was detected. |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.11 | Columnds0dpDiagInsErrMode | read-write | current | Determines the status of the current Insert Error mode associated with the framer. In order to insert an error, the ds0dpPortDiagCmdStatus must be sent in a SE… |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.12 | Columnds0dpDiagCmdStatus | read-write | current | This is the command status for the DS0DP Port Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failu… |
| 1.3.6.1.4.1.644.3.10 | IdentityeriDNXDs0dpMIB | The ERI Enterprise MIB Module for the DNX DS0DP Device. |