ERI-DNX-E3-MIB
47 objects
The ERI Enterprise MIB Module for the DNX E3 Device.
Imported Objects
| ERI-DNX-SMC-MIB | DataSwitch DecisionType devices FunctionSwitch LinkCmdStatus LinkPortAddress OneByteField PortStatus trapSequence |
| ERI-ROOT-SMI | eriMibs |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.8 | NodednxE3 | |||
| 1.3.6.1.4.1.644.2.4.2.8.0 | IdentitydnxE3Enterprise | current | ERI DNX E3 Enterprise for Alarms/Events | |
| 1.3.6.1.4.1.644.2.4.2.8.0.1 | Notificatione3PortConfigTrap | current | This trap is used to notify a NMS that a user has updated the configuration for a given E3 Port entry. | |
| 1.3.6.1.4.1.644.2.4.2.8.0.2 | Notificatione3E1ConfigTrap | current | This trap is used to notify a NMS that a user has updated the Link configuration for a given E3-E1 channel entry. | |
| 1.3.6.1.4.1.644.2.4.2.8.1 | Nodee3Config | |||
| 1.3.6.1.4.1.644.2.4.2.8.1.1 | Tablee3PortConfigTable | not-accessible | current | This is the E3 Port Configuration table which consists of an entry for each of the E3 cards. The total number of entries depends on the number of E3 cards in t… |
| 1.3.6.1.4.1.644.2.4.2.8.1.1.1 | Rowe3PortConfigEntry | not-accessible | current | The conceptual row of the E3 Port Configuration table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.8.1.1.1.1 | Columne3PortCfgAddr | read-only | current | This number uniquely identifies a E3 port resource. This number will be used throughout the system to identify a unique resource. |
| 1.3.6.1.4.1.644.2.4.2.8.1.1.1.2 | Columne3PortCfgResource | read-only | current | Uniquely identifies an E3 Port in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry. |
| 1.3.6.1.4.1.644.2.4.2.8.1.1.1.3 | Columne3Timing | read-write | current | Determines the mode of E3 transmit timing provided by the receive clock. When internal, timing is provided by an on-board oscillator. |
| 1.3.6.1.4.1.644.2.4.2.8.1.1.1.4 | Columne3ShortCable | read-write | current | Indicates the line build out of the E3 transmitter. 'Yes' when attached to a cable less than 50 feet long. |
| 1.3.6.1.4.1.644.2.4.2.8.1.1.1.5 | Columne3CmdStatus | read-write | current | The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.8.1.2 | Tablee3E1LinkConfigTable | not-accessible | current | This is the E3 E1 Link Configuration table which consists of an entry for each of the card's 16 links. The total number of entries depends on the number of E3 … |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1 | Rowe3E1LinkConfigEntry | not-accessible | current | The conceptual row of the E3 E1 Link Configuration table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.1 | Columne3E1CfgLinkAddr | read-only | current | This number uniquely identifies a E3 E1 link resource. This number will be used throughout the system to identify a unique resource. |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.2 | Columne3E1CfgResource | read-only | current | Uniquely identifies an E3 E1 Channel in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table ent… |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.3 | Columne3E1CfgLinkName | read-write | current | This is the user friendly text name to identify the link. |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.4 | Columne3E1Status | read-write | current | Dictates the current status of the link, in-service or out-of-service. |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.5 | Columne3E1Clear | read-write | current | Determines if the port supports E1 unframed clear mode. |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.6 | Columne3E1Framing | read-write | current | Determines the type of framing used on the line. When value of e3E1Clear is set to unframed (2), the only valid framing option is: e1Unframed(4). |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.7 | Columne3E1NetLoop | read-write | current | Determines whether or not the module should respond to loop diagnostic commands received from the network supplier. Select 'enable' unless the commands are to … |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.8 | Columne3E1RAI | read-write | current | Causes the module to discard data and send a yellow alarm if it is in a red alarm condition after a 3 second period. 'Yes' must be chosen if the network suppli… |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.9 | Columne3E1UnusedTSs | read-write | current | Determines the whether the code that will be transmitted over the unused links will be 'idle' or 'busy' (all 1's). |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.10 | Columne3E1NationalBits | read-write | current | Enables E1 National S-bits to be set to zero or one. This single byte field can be changed to set the values of the E1 NFA byte in odd frames as depicted below… |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.11 | Columne3E1CfgCmdStatus | read-write | current | The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.8.1.2.1.12 | Columne3E1InterNational | read-write | current | Enables InterNational S(i) Spare bit to be set to zero or one. This single byte field can be changed to set the values of the Bit 1 of TS0 G.704 frame as depic… |
| 1.3.6.1.4.1.644.2.4.2.8.2 | Nodee3Diag | |||
| 1.3.6.1.4.1.644.2.4.2.8.2.1 | Tablee3FramerStatusTable | not-accessible | current | This is the E-3 Framer Status table which consists of a single entry for each card's Framer Display. The total number of entries depends on the number of E3 ca… |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1 | Rowe3FramerStatusEntry | not-accessible | current | The conceptual row of the Framer table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.1 | Columne3FramerStatusAddr | read-only | current | This number uniquely identifies an e3 Framer resource. This number will be used throughout the system to identify a unique resource. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.2 | Columne3FramerStatusResource | read-only | current | This number uniquely identifies an e3 Framer link resource. This number is provided as key to allow the manager to map this entry to a corresponding Resource T… |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.3 | Columne3FramerStatusState | read-only | current | Determines the current line condition status of the Framer. ok (0) - No Alarm ais (8) - Sending All Ones lof (32) - Loss/Out of Frame los (64) - Loss of Signal… |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.4 | Columne3FramerStatusErrSecs | read-only | current | This is the total number of errored seconds. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.5 | Columne3FramerStatusOOFErrs | read-only | current | This is the number of seconds an Out Of Frame alignment error was declared. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.6 | Columne3FramerStatusAISSecs | read-only | current | This is the number of seconds an Alarm Indication Signal was declared. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.7 | Columne3FramerStatusFramingErrs | read-only | current | Indicates the number of Framing Errors. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.8 | Columne3FramerStatusLoop | read-write | current | The Loop status for the Framer as well as the Line Interface Unit. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.9 | Columne3FramerStatusBertState | read-write | current | Indicates the Bert State. bertOff (50) - Turns the BERT off framed-2047 - Framed 2047 framed-2-15th - Framed 2^15-1 Inverted |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.10 | Columne3FramerStatusBertSecs | read-only | current | Indicates the Bert Duration in Seconds. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.11 | Columne3FramerStatusBertErrSecs | read-only | current | Indicates the number of errored seconds since the Bert is running. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.12 | Columne3FramerStatusBertSync | read-only | current | Indicates the Bert Synchronization as being ON or OFF. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.13 | Columne3FramerStatusLiuRLOSs | read-only | current | This is the number of seconds recorded for Receive Loss of Signal. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.14 | Columne3FramerStatusLiuRLOLs | read-only | current | This is the number of seconds recorded for Receive Loss of Lock. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.15 | Columne3FramerStatusLiuLCVs | read-only | current | This is the number of seconds recorded for the Line Code Violation. |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.16 | Columne3FramerStatusInsErrMode | read-write | current | Determines the status of the current Insert Error mode associated with the framer. In order to insert an error, the e3FramerStatusCmdStatus must be sent in a S… |
| 1.3.6.1.4.1.644.2.4.2.8.2.1.1.17 | Columne3FramerStatusCmdStatus | read-write | current | This is the command status for the Framer Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. … |
| 1.3.6.1.4.1.644.3.11 | IdentityeriDNXE3MIB | The ERI Enterprise MIB Module for the DNX E3 Device. |