ERI-DNX-HDS3-MIB
88 objects
The ERI Enterprise MIB Module for the DNX HDS3 Device.
Imported Objects
| ERI-DNX-SMC-MIB | DecisionType devices FunctionSwitch LinkCmdStatus LinkPortAddress OneByteField PortStatus trapSequence |
| ERI-ROOT-SMI | eriMibs |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.2 | NodednxHDS3 | |||
| 1.3.6.1.4.1.644.2.4.2.2.0 | IdentitydnxHDS3Enterprise | current | ERI DNX HDS3 Enterprise for Alarms/Events | |
| 1.3.6.1.4.1.644.2.4.2.2.0.1 | Notificationhds3PortConfigTrap | current | This trap is used to notify a NMS that a user has updated the configuration for a given HDS3 Port entry. | |
| 1.3.6.1.4.1.644.2.4.2.2.0.2 | Notificationhds3T1E1ConfigTrap | current | This trap is used to notify a NMS that a user has updated the Link configuration for a given HDS3-T1/E1 channel entry. | |
| 1.3.6.1.4.1.644.2.4.2.2.1 | Nodehds3Config | |||
| 1.3.6.1.4.1.644.2.4.2.2.1.1 | Tablehds3PortConfigTable | not-accessible | current | This is the HDS-3 Port Configuration table which consists of an entry for each of the HDS-3 cards. The total number of entries depends on the number of HDS-3 c… |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1 | Rowhds3PortConfigEntry | not-accessible | current | The conceptual row of the HDS-3 Port Configuration table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.1 | Columnhds3PortCfgAddr | read-only | current | This number uniquely identifies a HDS-3 T1/E1 link resource. This number will be used throughout the system to identify a unique resource. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.2 | Columnhds3PortCfgResource | read-only | current | Uniquely identifies an HDS3 Port in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.3 | Columnhds3PortCfgName | read-write | current | This is the user friendly text name to identify the circuit. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.4 | Columnhds3FacilityId | read-write | obsolete | This is a description of the facility where this equipment is located. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.5 | Columnhds3EquipmentId | read-write | obsolete | This is a description of the equipment in use. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.6 | Columnhds3Location | read-write | obsolete | This is the user description of the location for this equipment. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.7 | Columnhds3FrameId | read-write | obsolete | This is the description of the building where this equipment is located. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.8 | Columnhds3UnitName | read-write | obsolete | This is the description of the bay or device this equipment is part of. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.9 | Columnhds3PortNumber | read-write | obsolete | This is the user description of the HDS-3 port. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.10 | Columnhds3Generator | read-write | obsolete | This is the user description of the number generated by this equipment. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.11 | Columnhds3M13OpMode | read-write | current | The framing selection for the DS1 to HDS-3 multiplexing. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.12 | Columnhds3RcvLoopTiming | read-write | current | Enables or disables the HDS-3 transmit timing provided by the receive clock. When disabled, timing is provided by an on-board oscillator. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.13 | Columnhds3ShortCable | read-write | current | Indicates the line build out of the HDS-3 transmitter. 'Yes' when attached to a cable less than 50 feet long. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.14 | Columnhds3M13RemLoop | read-write | current | Controls line codes used to set and reset DS3 remote line loopback requests. This setting is provided by the carrier. These codes cause a DS3 loopback in remot… |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.15 | Columnhds3FEACLoopbackReq | read-write | current | Select enabled(1) to allow the module to respond to a Far End Alarm and Control loopback request. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.16 | Columnhds3XmtAISLocalLoop | read-write | current | The Transmitted bit pattern used when the HDS3 port is in Local Loop. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.17 | Columnhds3RcvAIS | read-write | current | The Received bit pattern to use to determine when the remote line is in error. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.18 | Columnhds3XmtAIS | read-write | current | The Transmitted bit pattern that used when the HDS3 port is in error. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.19 | Columnhds3DS2Group1 | read-write | current | Indicates the type of grouping option used to on links 1 through 4. Using the VT 2.0, link 4 is not used. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.20 | Columnhds3DS2Group2 | read-write | current | Indicates the type of grouping option used to on links 5 through 8. Using the VT 2.0, link 8 is not used. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.21 | Columnhds3DS2Group3 | read-write | current | Indicates the type of grouping option used to on links 9 through 12. Using the VT 2.0, link 12 is not used. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.22 | Columnhds3DS2Group4 | read-write | current | Indicates the type of grouping option used to on links 13 through 16. Using the VT 2.0, link 16 is not used. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.23 | Columnhds3DS2Group5 | read-write | current | Indicates the type of grouping option used to on links 17 through 20. Using the VT 2.0, link 20 is not used. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.24 | Columnhds3DS2Group6 | read-write | current | Indicates the type of grouping option used to on links 21 through 24. Using the VT 2.0, link 24 is not used. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.25 | Columnhds3DS2Group7 | read-write | current | Indicates the type of grouping option used to on links 25 through 28. Using the VT 2.0, link 28 is not used. |
| 1.3.6.1.4.1.644.2.4.2.2.1.1.1.26 | Columnhds3CmdStatus | read-write | current | The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.2.1.2 | Tablehds3T1E1LinkConfigTable | not-accessible | current | This is the HDS-3 T-1 Link Configuration table which consists of an entry for each of the card's 28 links. The total number of entries depends on the number of… |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1 | Rowhds3T1E1LinkConfigEntry | not-accessible | current | The conceptual row of the HDS-3 T-1 Link Configuration table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.1 | Columnhds3T1E1CfgLinkAddr | read-only | current | This number uniquely identifies a HDS-3 T1/E1 link resource. This number will be used throughout the system to identify a unique resource. |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.2 | Columnhds3T1E1CfgResource | read-only | current | Uniquely identifies an HDS-3 T1/E1 Channel in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Tab… |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.3 | Columnhds3T1E1CfgLinkName | read-write | current | This is the user friendly text name to identify the link. |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.4 | Columnhds3T1E1Status | read-write | current | Dictates the current status of the link, in-service or out-of-service. |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.5 | Columnhds3T1E1Clear | read-write | current | Determines if the port supports T1 or E1 unframed. |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.6 | Columnhds3T1E1Framing | read-write | current | Determines the type of framing used on the line. Choose between T1 SuperFrame 'D4', Extended SuperFrame (ESF), or T1 Unframed. When value of hds3T1E1Clear is s… |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.7 | Columnhds3T1E1NetLoop | read-write | current | Determines whether or not the module should respond to loop diagnostic commands received from the network supplier. Select 'enable' unless the commands are to … |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.8 | Columnhds3T1E1YelAlrm | read-write | current | Causes the module to discard data and send a yellow alarm if it is in a red alarm condition after a 3 second period. 'Yes' must be chosen if the network suppli… |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.9 | Columnhds3T1E1RecoverTime | read-write | current | This is the red alarm timeout value. Determines the amount of seconds the port will wait to stop sending the yellow alarm when coming out of a red alarm condit… |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.10 | Columnhds3T1E1EsfFormat | read-write | current | Determines the type of ESF network commands the T-1 link will respond to. It has no meaning for D4 networks. With ESF networks, this information must be obtain… |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.11 | Columnhds3T1E1IdleCode | read-write | current | Determines the whether the code that will be transmitted over the unused links will be 'idle' or 'busy' (all 1's). |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.12 | Columnhds3T1E1CfgCmdStatus | read-write | current | The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.13 | Columnhds3T1E1Gr303Facility | read-only | obsolete | Enables link to be configured as a Gr303 Facility |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.14 | Columnhds3T1E1NationalBits | read-write | current | Enables E1 National S-bits to be set to zero or one. This single byte field can be changed to set the values of the E1 NFA byte in odd frames as depicted below… |
| 1.3.6.1.4.1.644.2.4.2.2.1.2.1.15 | Columnhds3T1E1InterNational | read-write | current | Enables InterNational S(i) Spare bit to be set to zero or one. This single byte field can be changed to set the values of the Bit 1 of TS0 G.704 frame as depic… |
| 1.3.6.1.4.1.644.2.4.2.2.2 | Nodehds3Diag | |||
| 1.3.6.1.4.1.644.2.4.2.2.2.1 | Tablehds3FramerStatusTable | not-accessible | current | This is the HDS-3 Framer Status table which consists of a single entry for each card's Framer Display. The total number of entries depends on the number of HDS… |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1 | Rowhds3FramerStatusEntry | not-accessible | current | The conceptual row of the Framer table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.1 | Columnhds3FramerStatusAddr | read-only | current | This number uniquely identifies a HDS-3 Framer resource. This number will be used throughout the system to identify a unique resource. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.2 | Columnhds3FramerStatusResource | read-only | current | This number uniquely identifies a HDS-3 Framer link resource. This number is provided as key to allow the manager to map this entry to a corresponding Resource… |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.3 | Columnhds3FramerStatusState | read-only | current | Determines the current line condition status of the Framer. ok (0) - No Alarm ais (8) - Sending All Ones lof (32) - Loss/Out of Frame los (64) - Loss of Signal… |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.4 | Columnhds3FramerStatusRedAlrmErrSecs | read-only | current | This is the number of seconds a Red Alarm condition was declared. Declared when out of frame condition persists for more than 13.5msec. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.5 | Columnhds3FramerStatusLOSErrSecs | read-only | current | This is the number of seconds a Loss of Signal condition was declared. Loss of signal declared after receipt of 175 contiguous zeroes. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.6 | Columnhds3FramerStatusOOFErrSecs | read-only | current | This is the number of seconds Frame alignment errors were detected. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.7 | Columnhds3FramerStatusAISErrSecs | read-only | current | This is the number of seconds a Alarm Indication Signal condition was declared. Declared after optioned AIS pattern is detected for more than 13.5msec. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.8 | Columnhds3FramerStatusRcvIdleErrSecs | read-only | current | This is the number of seconds a Receive Idle Pattern condition was declared. Declared when DS3 1100 idle pattern detected for more than 13.5ms. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.9 | Columnhds3FramerStatusFarEndRcvErrSecs | read-only | current | This is the number of seconds a Far End Receive Failure condition was declared. Declared when both X-bits set to 0 in M13 and C-bit Parity frame format (i.e., … |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.10 | Columnhds3FramerStatusCFAErrSecs | read-only | current | This is the number of seconds a Frame alignment change was detected. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.11 | Columnhds3FramerStatusTotErrSecs | read-only | current | Total number of seconds in which any of the errored events have occurred. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.12 | Columnhds3FramerStatusPbitParityErrs | read-only | current | The number of P-bit Parity errors detected. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.13 | Columnhds3FramerStatusCbitParityErrs | read-only | current | The number of C-bit Parity errors detected. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.14 | Columnhds3FramerStatusFebeErrs | read-only | current | The number of Far End Block errors detected. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.15 | Columnhds3FramerStatusLCVErrs | read-only | current | The number of Line Code Violation errors detected. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.16 | Columnhds3FramerStatusFramingErrs | read-only | current | The number of Framing errors detected. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.17 | Columnhds3FramerStatusExcessZeroErrs | read-only | current | The number of Excessive Zero errors detected. |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.18 | Columnhds3FramerStatusInsErrMode | read-write | current | Determines the status of the current Insert Error mode associated with the framer. In order to insert an error, the hds3FramerStatusCmdStatus must be sent in a… |
| 1.3.6.1.4.1.644.2.4.2.2.2.1.1.19 | Columnhds3FramerStatusCmdStatus | read-write | current | This is the command status for the DS3 Framer Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failu… |
| 1.3.6.1.4.1.644.2.4.2.2.2.2 | Tablehds3LIUTable | not-accessible | current | This is the HDS-3 LIU Diagnostic Status Display table which consists of an entry for each HDS3 card's Line Interface Unit Display. The number of entries depend… |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1 | Rowhds3LIUEntry | not-accessible | current | The conceptual row of the HDS3 LIU table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.1 | Columnhds3LIUAddr | read-only | current | This number uniquely identifies a HDS-3 LIU resource address. This number will be used throughout the system to identify a unique resource. |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.2 | Columnhds3LIUResource | read-only | current | This number uniquely identifies a HDS-3 LIU resource. This number is provided as a key to allow the manager to map this entry to a corresponding Resource Table… |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.3 | Columnhds3LIUBertState | read-write | current | This is the LIU Bert State indicated by liu-bert(on)/off. The LIU Bert is an 2^15-1 Unframed BERT. |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.4 | Columnhds3LIUBertErrSecs | read-only | current | This is the number of LIU Bert Errored seconds. |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.5 | Columnhds3LIUBertDuration | read-only | current | This is the number of seconds for the LIU Bert Duration. |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.6 | Columnhds3LIULoopType | read-write | current | Indicates the loopback status of the DS3 Framer/LIU for this device. off (0) - indicates loopback is disabled ds3-local (1) - indicates DS3 local data is loope… |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.7 | Columnhds3LIUDigitalErrs | read-only | current | This is the number of seconds recorded for the LIU Digital Errors. |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.8 | Columnhds3LIUAnalogErrs | read-only | current | This is the number of seconds recorded for the LIU Analog Errors. |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.9 | Columnhds3LIUExcessZeroErrs | read-only | current | This is the number of seconds LIU Excess zero errors were detected. |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.10 | Columnhds3LIUCodingViolationErrs | read-only | current | This is the total number of Errored Seconds for the LIU Coding Violation. |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.11 | Columnhds3LIUPRBSCheckErrs | read-only | current | This is the total number of Errored Seconds for the LIU PRBS check. |
| 1.3.6.1.4.1.644.2.4.2.2.2.2.1.12 | Columnhds3LIUCmdStatus | read-write | current | This is the command status for the LIU Framer Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failu… |
| 1.3.6.1.4.1.644.3.5 | IdentityeriDNXHybridDS3MIB | The ERI Enterprise MIB Module for the DNX HDS3 Device. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DS2GroupType | INTEGER { e1(0), ds1(1) } | current | Indicates the type of DS2/G.747 group type option used on the links. VT 1.5 is used to group T1 links into 7 groups of 4 for the 28 links. VT 2.0 is used to group E1 links into 7 groups of 3 for the 21 links. Using the … |