ERI-DNX-LINK-TEST-MIB
73 objects
The ERI Enterprise MIB Module for the DNX DSx1 links and HS ports.
Imported Objects
| ERI-DNX-SMC-MIB | DataSwitch DecisionType dnx LinkPortAddress OneByteField |
| ERI-ROOT-SMI | eriMibs |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.644.2.4.5 | Nodediagnostics | |||
| 1.3.6.1.4.1.644.2.4.5.1 | Nodedsx1Test | |||
| 1.3.6.1.4.1.644.2.4.5.1.1 | Tabledsx1TestTable | not-accessible | current | This is the DS1/E1 Bit Error Test Statistics table which consists of an entry for each DS1/E1 port in the system. This table provides the total counters accumu… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1 | Rowdsx1TestEntry | not-accessible | current | The conceptual row of the DS1/E1 Bit Error Test Statistics table. A row in this table cannot be added or deleted but the counter time period can be reset to ze… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.1 | Columndsx1TestLinkAddr | read-only | current | This number uniquely identifies an DS1/E1 link resource. This number will be used throughout the system to identify a unique link. The format is represented us… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.2 | Columndsx1TestResrcId | read-only | current | Uniquely identifies a link in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry. |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.3 | Columndsx1TestLinkState | read-only | current | Determines the current line condition status of the link. In order to turn on a loop, the link must be configured In Service. ok (0) - In Sync yel (2) - Yellow… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.4 | Columndsx1TestLinkLoop | read-write | current | Determines the status of the line loopback associated with this link. In order to turn on a loop, the link must be configured In Service. off (0) - indicates l… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.5 | Columndsx1TestBackplnLoop | read-write | current | Determines whether or not the link has connection loopback via the Backplane. This affects a data connection which must already be in place prior to invoking t… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.6 | Columndsx1TestBertState | read-write | current | This indicates the current BERT test running and can be used to start and stop a desired Test Period. In order to turn on a loop, the link must be configured I… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.7 | Columndsx1TestDuration | read-only | current | This the total number of seconds the test data has been collected. |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.8 | Columndsx1TestBitErrs | read-only | current | This is the total number of bits in error since the Test has been running. |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.9 | Columndsx1TestESs | read-only | current | This is the total number of errored seconds that have occurred on the local link since the Test has been turned on. This Errored Second is defined as a one sec… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.10 | Columndsx1TestRemoteESs | read-only | current | This is the total number of errored seconds that have occurred on the remote link since the Test has been turned on. This only applies to bi-directional Berts … |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.11 | Columndsx1TestErrFreeSecs | read-only | current | This is the total number of error free seconds since the Test has been running. |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.12 | Columndsx1TestSESs | read-only | current | This is the total number of severely errored seconds that have occurred since the Test has been running. This Severely Errored Second is defined as a one secon… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.13 | Columndsx1TestUASs | read-only | current | This is the number of Unavailable Seconds (UAS) that have occurred since the Test has been running. The UAS is a period of time consisting of 10 or more consec… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.14 | Columndsx1TestASs | read-only | current | This is the number of Available Seconds (AS) that have occurred since the Test has been running. The AS is the Test duration seconds minus the UAS. |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.15 | Columndsx1TestESNonUASs | read-only | current | This is the number of Error Seconds (ES) which are not part of the UAS that occurred since the Test has been running. |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.16 | Columndsx1TestSevereError | read-write | current | This is the number of bits in error in a given second that determine a severely errored second. |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.17 | Columndsx1TestBitSpeed | read-only | current | This is the current bit rate at which the link is configured for. |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.18 | Columndsx1TestCmdStatus | read-write | current | This is the command status for the DS1/E1 Link Test Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.19 | Columndsx1TestInsErrMode | read-write | current | Determines the status of the current Insert Error mode associated with this link. In order to insert an error, the dsx1TestCmdStatus must be sent in a SET PDU … |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.20 | Columndsx1TestUsrLoopUnframed | read-write | current | This specifies the type of framing to use during User Defined remote loops. no (0) - Loop data will be framed. yes (1) - Loop data will be unframed. This is th… |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.21 | Columndsx1TestUsrDefLoop | read-write | current | The user defined loop provides the length and value options for activating as well as deactivating the loop. The format is represented using an IP address synt… |
| 1.3.6.1.4.1.644.2.4.5.2 | NodehsTest | |||
| 1.3.6.1.4.1.644.2.4.5.2.1 | TablehsTestTable | not-accessible | current | This is the High Speed Bit Error Test Statistics table which consists of an entry for each High Speed port in the system. This table provides the total counter… |
| 1.3.6.1.4.1.644.2.4.5.2.1.1 | RowhsTestEntry | not-accessible | current | The conceptual row of the High Speed Bit Error Test Statistics table. A row in this table cannot be added or deleted but can be modified. |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.1 | ColumnhsTestLinkAddr | read-only | current | This number uniquely identifies an High Speed link resource. This number will be used throughout the system to identify a unique link. The format is represente… |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.2 | ColumnhsTestResrcId | read-only | current | Uniquely identifies a link in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry. |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.3 | ColumnhsTestLinkState | read-only | current | Determines the current line condition status of the link. In order to turn on a loop, the link must be configured In Service with a Connection. ok (0) - In Syn… |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.4 | ColumnhsTestLocalLoop | read-write | current | Determines the status of the local loopback associated with this link. In order to turn on a loop, the link must be configured In Service with a Connection. of… |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.5 | ColumnhsTestRemoteLoop | read-write | current | Determines the status of the remote side loopback associated with this link. In order to turn on a loop, the link must be configured In Service with a Connecti… |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.6 | ColumnhsTestBackplnLoop | read-write | current | Determines whether or not the link has connection loopback via the Backplane. This affects a data connection which must already be in place prior to invoking t… |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.7 | ColumnhsTestBertState | read-write | current | This indicates the current BERT test running and can be used to start and stop a desired Test Period. In order to turn on a loop, the link must be configured I… |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.8 | ColumnhsTestDuration | read-only | current | This the total number of seconds the test data has been collected. |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.9 | ColumnhsTestLocESs | read-only | current | This is the total number of errored seconds that have occurred on the local link since the Test has been turned on. This Errored Second is defined as a one sec… |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.10 | ColumnhsTestRemESs | read-only | current | This is the total number of errored seconds that have occurred on the remote side (backplane bus) since the Test has been turned on. This Errored Second is def… |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.11 | ColumnhsTestBitSpeed | read-only | current | This is the current bit rate at which the link is configured for. |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.12 | ColumnhsTestCmdStatus | read-write | current | This is the command status for the High Speed Test Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or … |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.13 | ColumnhsTestLocEFSs | read-only | current | This is the total number of Local Error Free Seconds since the Test has been running. |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.14 | ColumnhsTestLocUASs | read-only | current | This is the number of Local Unavailable Seconds (UAS) that have occurred since the Test has been running. The UAS is a period of time consisting of 10 or more … |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.15 | ColumnhsTestLocASs | read-only | current | This is the number of Local Available Seconds (AS) that have occurred since the Test has been running. The AS is the Test duration seconds minus the UAS. |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.16 | ColumnhsTestLocESNonUASs | read-only | current | This is the number of Local Error Seconds (ES) which are not part of the UAS that occurred since the Test has been running. |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.17 | ColumnhsTestRemEFSs | read-only | current | This is the total number of Remote Error Free Seconds since the Test has been running. |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.18 | ColumnhsTestRemUASs | read-only | current | This is the number of Remote Unavailable Seconds (UAS) that have occurred since the Test has been running. The UAS is a period of time consisting of 10 or more… |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.19 | ColumnhsTestRemASs | read-only | current | This is the number of Remote Available Seconds (AS) that have occurred since the Test has been running. The AS is the Test duration seconds minus the UAS. |
| 1.3.6.1.4.1.644.2.4.5.2.1.1.20 | ColumnhsTestRemESNonUASs | read-only | current | This is the number of Remote Error Seconds (ES) which are not part of the UAS that occurred since the Test has been running. |
| 1.3.6.1.4.1.644.2.4.5.3 | Nodedsx1Status | |||
| 1.3.6.1.4.1.644.2.4.5.3.1 | Tabledsx1StatusTable | not-accessible | current | This is the DS1/E1 Link Status Counters table which consists of an entry for each DS1/E1 port in the system. This table provides the total counters accumulated… |
| 1.3.6.1.4.1.644.2.4.5.3.1.1 | Rowdsx1StatusEntry | not-accessible | current | The conceptual row of the DS1/E1 Link Status Counters table. A row in this table cannot be added or deleted but the counter time period can be reset to zero. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.1 | Columndsx1StatusAddr | read-only | current | This number uniquely identifies an DS1/E1 link resource. This number will be used throughout the system to identify a unique link. The format is represented us… |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.2 | Columndsx1StatusResrcId | read-only | current | Uniquely identifies a link in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.3 | Columndsx1StatusState | read-only | current | Determines the current line condition status of the link. In order to turn on a loop, the link must be configured In Service. ok (0) - In Sync yel (2) - Yellow… |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.4 | Columndsx1StatusRedAlrmErrs | read-only | current | This is the number of seconds a Loss of Signal was declared. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.5 | Columndsx1StatusRAIErrs | read-only | current | This is the number of seconds a Remote Alarm Indication was received. Sometimes referred to as a Yellow Alarm Indication. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.6 | Columndsx1StatusMFRAIErrs | read-only | current | This is the number of seconds a Far End CAS Multi-Frame Alarm Indication was received. Sometimes referred to as a MF Yellow Alarm Indication. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.7 | Columndsx1StatusLOSErrs | read-only | current | This is the number of seconds a Loss of Signal was declared. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.8 | Columndsx1StatusAISErrs | read-only | current | This is the number of seconds a Alarm Indication Signal was declared. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.9 | Columndsx1StatusOOFErrs | read-only | current | This is the number of seconds a Out Of Frame alignement error was declared. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.10 | Columndsx1StatusSEFErrs | read-only | current | This is the number of seconds a Severely Errored Frame was declared. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.11 | Columndsx1StatusTransSlipErrs | read-only | current | This is the number of seconds a controlled slip was detected on outgoing path. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.12 | Columndsx1StatusRecvSlipErrs | read-only | current | This is the number of seconds a controlled slip was detected on incoming path. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.13 | Columndsx1StatusCRCErrs | read-only | current | This is the total number of CRC-6 (T1) or CRC-4 (E1) errors detected. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.14 | Columndsx1StatusBPVErrs | read-only | current | This is the total number of invalid Bipolar Violations or Code Violations detected. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.15 | Columndsx1StatusFrameBitErrs | read-only | current | This is the total number of Frame Alignment Signal (FAS) framing words received incorrectly. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.16 | Columndsx1StatusFarEndBlockErrs | read-only | current | This is the total number of Remote CRC errors reported. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.17 | Columndsx1StatusTrunkCondition | read-only | current | Detetermines if Trunk Conditioning state is 'On' or 'Off'. |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.18 | Columndsx1StatusInsErrMode | read-write | current | Determines the status of the current Insert Error mode associated with this link. In order to insert an error, the dsx1StatusCmdStatus must be sent in a SET PD… |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.19 | Columndsx1StatusCmdStatus | read-write | current | This is the command status for the DS1/E1 Link Test Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or… |
| 1.3.6.1.4.1.644.2.4.5.3.1.1.20 | Columndsx1StatusRcvNationalBits | read-only | current | Displays the E1 National S-bits being received on the link. This single byte field shows the values in Hex of the E1 NFA byte in odd frames as depicted below: … |
| 1.3.6.1.4.1.644.3.8 | IdentityeriDNXLinkTestMIB | The ERI Enterprise MIB Module for the DNX DSx1 links and HS ports. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| UserDefFormat | IpAddress | current | Used for the user defined loop format. |