ERI-DNX-OCTAL-T1E1-MIB
24 objects
The ERI Enterprise MIB Module for the DNX T1/E1 ports.
Imported Objects
| ERI-DNX-SMC-MIB | DataSwitch DecisionType devices FunctionSwitch LinkCmdStatus LinkPortAddress OneByteField PortStatus trapSequence |
| ERI-ROOT-SMI | eriMibs |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.4 | NodednxOT1E1 | |||
| 1.3.6.1.4.1.644.2.4.2.4.0 | IdentitydnxOT1E1Enterprise | current | ERI DNX T1/E1 Enterprise for Alarms/Events | |
| 1.3.6.1.4.1.644.2.4.2.4.0.1 | NotificationoT1E1ConfigTrap | current | This trap is used to notify a NMS that a user has updated the configuration for specific T1/E1 Port. | |
| 1.3.6.1.4.1.644.2.4.2.4.1 | NodeoteConfig | |||
| 1.3.6.1.4.1.644.2.4.2.4.1.1 | TableoT1E1ConfigTable | not-accessible | current | This is the Octal T1/E1 Configuration table which consists of an entry for each of the Octal T1/E1 card's 8 links(ports). The total number of entries depends o… |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1 | RowoT1E1ConfigEntry | not-accessible | current | The conceptual row of the Octal T1/E1 Configuration table. A row in this table cannot be added or deleted, only modified using the oT1E1CfgCmdStatus field with… |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.1 | ColumnoT1E1CfgLinkAddr | read-only | current | This number uniquely identifies an Octal T1/E1 link resource. This number will be used throughout the system to identify a unique link. The format is represent… |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.2 | ColumnoT1E1CfgResource | read-only | current | Uniquely identifies an Octal T1/E1 link in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table … |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.3 | ColumnoT1E1CfgLinkName | read-write | current | This is the user friendly text name to identify the link. |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.4 | ColumnoT1E1Status | read-write | current | Dictates the current status of the port, in-service or out-of-service. |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.5 | ColumnoT1E1ClearT1E1 | read-write | current | Determines if the port supports T1 or E1 unframed. |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.6 | ColumnoT1E1LineType | read-write | current | Determines the type of framing used on the line. Choose between E1 (Europeon) or T1 type framing options. When value of oT1E1ClearT1E1 is set to unframed (2), … |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.7 | ColumnoT1E1NetLoop | read-write | current | Determines whether or not the module should respond to loop diagnostic commands received from the network supplier. Select 'enable' unless the commands are to … |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.8 | ColumnoT1E1YelAlrm | read-write | current | Causes the module to discard data and send a yellow alarm if it is in a red alarm condition after the set recover time period. 'Yes' must be chosen if the netw… |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.9 | ColumnoT1E1RecoverTime | read-write | current | This is the red alarm timeout value. Determines the amount of seconds the port will wait to stop sending the yellow alarm when coming out of a red alarm condit… |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.10 | ColumnoT1E1IdleCode | read-write | current | Determines the whether the data that will be transmitted over the unused Ds0s will be 'idle' or 'busy' (all 1's). |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.11 | ColumnoT1E1EsfFormat | read-write | current | Determines the type of ESF network commands the T-1 link will respond to. It has no meaning for D4 networks. With ESF networks, this information must be obtain… |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.12 | ColumnoT1E1CfgLBO | read-write | current | Determines the type of Line Build Out (LBO) used on the link. Choose between short haul or long haul designations but this varies between T1 & E1. E1 LBO is de… |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.13 | ColumnoT1E1CfgCmdStatus | read-write | current | The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.14 | ColumnoT1E1Gr303Facility | read-only | obsolete | Enables link to be configured as a Gr303 Facility |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.15 | ColumnoT1E1NationalBits | read-write | current | Enables E1 National S-bits to be set to zero or one. This single byte field can be changed to set the values of the E1 NFA byte in odd frames as depicted below… |
| 1.3.6.1.4.1.644.2.4.2.4.1.1.1.16 | ColumnoT1E1InterNational | read-write | current | Enables InterNational S(i) Spare bit to be set to zero or one. This single byte field can be changed to set the values of the Bit 1 of TS0 G.704 frame as depic… |
| 1.3.6.1.4.1.644.2.4.2.4.2 | NodeoteDiag | |||
| 1.3.6.1.4.1.644.3.2 | IdentityeriDNXOctalT1E1MIB | The ERI Enterprise MIB Module for the DNX T1/E1 ports. |