ERI-DNX-STS1-MIB
66 objects
The ERI Enterprise MIB Module for the DNX STS1 Device.
Imported Objects
| ERI-DNX-SMC-MIB | DecisionType devices FunctionSwitch LinkCmdStatus LinkPortAddress PortStatus trapSequence |
| ERI-ROOT-SMI | eriMibs |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.3 | NodednxSTS1 | |||
| 1.3.6.1.4.1.644.2.4.2.3.0 | IdentitydnxSTS1Enterprise | current | ERI DNX STS1 Enterprise for Alarms/Events | |
| 1.3.6.1.4.1.644.2.4.2.3.0.1 | Notificationsts1MapperConfigTrap | current | This trap is used to notify a NMS that a user has updated the Link configuration for a given STS1 Mapper entry. | |
| 1.3.6.1.4.1.644.2.4.2.3.0.2 | Notificationsts1T1E1ConfigTrap | current | This trap is used to notify a NMS that a user has updated the Link configuration for a given STS-1 T1 channel entry. | |
| 1.3.6.1.4.1.644.2.4.2.3.1 | Nodests1Config | |||
| 1.3.6.1.4.1.644.2.4.2.3.1.1 | Tablests1MapperConfigTable | not-accessible | current | This is the STS-1 Mapper LIU Configuration table which consists of an entry for each of the STS-1 cards. The total number of entries depends on the number of S… |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1 | Rowsts1MapperConfigEntry | not-accessible | current | The conceptual row of the STS-1 Mapper LIU Configuration table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.1 | Columnsts1MapperAddr | read-only | current | This number uniquely identifies a STS-1 slot/mapper. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.2 | Columnsts1MapperResource | read-only | current | Uniquely identifies an STS1 Device in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.3 | Columnsts1VtGroup1 | read-only | current | Indicates the type of grouping option used to on links 1 through 4. Using the VT 2.0, link 4 is not used. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.4 | Columnsts1VtGroup2 | read-only | current | Indicates the type of grouping option used to on links 5 through 8. Using the VT 2.0, link 8 is not used. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.5 | Columnsts1VtGroup3 | read-only | current | Indicates the type of grouping option used to on links 9 through 12. Using the VT 2.0, link 12 is not used. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.6 | Columnsts1VtGroup4 | read-only | current | Indicates the type of grouping option used to on links 13 through 16. Using the VT 2.0, link 16 is not used. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.7 | Columnsts1VtGroup5 | read-only | current | Indicates the type of grouping option used to on links 17 through 20. Using the VT 2.0, link 20 is not used. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.8 | Columnsts1VtGroup6 | read-only | current | Indicates the type of grouping option used to on links 21 through 24. Using the VT 2.0, link 24 is not used. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.9 | Columnsts1VtGroup7 | read-only | current | Indicates the type of grouping option used to on links 25 through 28. Using the VT 2.0, link 28 is not used. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.10 | Columnsts1VtMapping | read-only | current | Indicates the Mapper Standard currently in use. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.11 | Columnsts1Timing | read-write | current | Indicates whether the STS-1 device uses an internal or external clock source. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.12 | Columnsts1ShortCable | read-write | current | Indicates the line build out of the STS-1 transmitter. 'enable' when attached to a cable less than 50 feet long. |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.13 | Columnsts1MaprCmdStatus | read-write | current | The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.3.1.2 | Tablests1T1E1LinkConfigTable | not-accessible | current | This is the STS T1/E1 Link Configuration table which consists of an entry for each of the card's 28 links. The total number of entries depends on the number of… |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1 | Rowsts1T1E1LinkConfigEntry | not-accessible | current | The conceptual row of the STS T1/E1 Link Configuration table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.1 | Columnsts1T1E1CfgLinkAddr | read-only | current | This number uniquely identifies a STS T1/E1 link resource. This number will be used throughout the system to identify a unique resource. |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.2 | Columnsts1T1E1CfgResource | read-only | current | Uniquely identifies an STS T1/E1 Channel in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table… |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.3 | Columnsts1T1E1CfgLinkName | read-write | current | This is the user friendly text name to identify the link. |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.4 | Columnsts1T1E1Status | read-write | current | Dictates the current status of the link, in-service or out-of-service. |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.5 | Columnsts1T1E1Clear | read-write | current | Determines if the port supports T1 or E1 unframed. |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.6 | Columnsts1T1E1Framing | read-write | current | Determines the type of framing used on the line. Choose between T1 SuperFrame 'D4', Extended SuperFrame (ESF), or T1 Unframed. Currently E1 is not supported. W… |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.7 | Columnsts1T1E1NetLoop | read-write | current | Determines whether or not the module should respond to loop diagnostic commands received from the network supplier. Select 'enable' unless the commands are to … |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.8 | Columnsts1T1E1YelAlrm | read-write | current | Causes the module to discard data and send a yellow alarm if it is in a red alarm condition after a 3 second period. 'Yes' must be chosen if the network suppli… |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.9 | Columnsts1T1E1RecoverTime | read-write | current | This is the red alarm timeout value. Determines the amount of seconds the port will wait to stop sending the yellow alarm when coming out of a red alarm condit… |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.10 | Columnsts1T1E1EsfFormat | read-write | current | Determines the type of ESF network commands the T-1 link will respond to. It has no meaning for D4 networks. With ESF networks, this information must be obtain… |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.11 | Columnsts1T1E1IdleCode | read-write | current | Determines the whether the code that will be transmitted over the unused links will be 'idle' or 'busy' (all 1's). |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.12 | Columnsts1T1E1CfgCmdStatus | read-write | current | The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.3.1.2.1.13 | Columnsts1T1E1Gr303Facility | read-only | obsolete | Enables link to be configured as a Gr303 Facility |
| 1.3.6.1.4.1.644.2.4.2.3.2 | Nodests1Diag | |||
| 1.3.6.1.4.1.644.2.4.2.3.2.1 | Tablests1MapperStatusTable | not-accessible | current | This is the STS-1 Mapper Status table which consists of a single entry for each card's Mapper Display. The total number of entries depends on the number of STS… |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1 | Rowsts1MapperStatusEntry | not-accessible | current | The conceptual row of the Mapper table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.1 | Columnsts1MapperStatusAddr | read-only | current | This number uniquely identifies a STS1 Mapper resource. This number will be used throughout the system to identify a unique resource. |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.2 | Columnsts1MapperStatusResource | read-only | current | This number uniquely identifies a STS1 Mapper resource. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table… |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.3 | Columnsts1MapperStatusState | read-only | current | Determines the current line condition status of the Mapper. ok (0), lof (32), lop (256), oof (512), ais (1024), los (8192), lomf (131072), errors (2147483647) |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.4 | Columnsts1MapperStatusLOSErrs | read-only | current | This is the number of seconds a Loss of Signal was declared. |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.5 | Columnsts1MapperStatusOOFErrs | read-only | current | This is the number of seconds an Out Of Frame alignement error was declared. |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.6 | Columnsts1MapperStatusLOFErrs | read-only | current | This is the number of seconds a Loss of Frame was declared. |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.7 | Columnsts1MapperStatusLOPtrErrs | read-only | current | This is the number of seconds a Loss of Pointer was declared. |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.8 | Columnsts1MapperStatusAISErrs | read-only | current | This is the number of seconds an Alarm Indication Signal was declared. |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.9 | Columnsts1MapperStatusMultiFErrs | read-only | current | This is the number of seconds a Near End Loss of Multi-Frame Signal was declared. |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.10 | Columnsts1MapperStatusRxTraceErrs | read-only | current | This is the number of seconds an error has been detected in the receive path trace. |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.11 | Columnsts1MapperStatusTotErrSecs | read-only | current | This is the total number of Errored Seconds. |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.12 | Columnsts1MapperStatusCmdStatus | read-write | current | This is the command status for the Mapper Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. … |
| 1.3.6.1.4.1.644.2.4.2.3.2.2 | Tablests1LIUTable | not-accessible | current | This is the STS1 LIU Diagnostic Status table which consists of an entry for each STS1 card's Line Interface Unit Display. The number of entries depends on the … |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1 | Rowsts1LIUEntry | not-accessible | current | The conceptual row of the Mapper table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.1 | Columnsts1LIUAddr | read-only | current | This number uniquely identifies a STS1 Mapper resource address. This number will be used throughout the system to identify a unique resource. |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.2 | Columnsts1LIUResource | read-only | current | This number uniquely identifies a STS1 Mapper resource. This number is provided as a key to allow the manager to map this entry to a corresponding Resource Tab… |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.3 | Columnsts1LIUBertState | read-write | current | This is the LIU Bert State indicated by on/off. |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.4 | Columnsts1LIUBertErrSecs | read-only | current | This is the number of LIU Bert Errored seconds. |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.5 | Columnsts1LIUBertDuration | read-only | current | This is the number of seconds for the LIU Bert Duration. |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.6 | Columnsts1LIULoopType | read-write | current | Indicates the loopback status of the Mapper/LIU for this STS1 device. off (0) - indicates loopback is disabled mapper (1) - indicates Mapper local data is loop… |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.7 | Columnsts1LIUDigitalErrs | read-only | current | This is the number of seconds recorded for the LIU Digital Errors. |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.8 | Columnsts1LIUAnalogErrs | read-only | current | This is the number of seconds recorded for the LIU Analog Errors. |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.9 | Columnsts1LIUExcessZeros | read-only | current | This is the number of seconds LIU Excess zero errors were detected. |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.10 | Columnsts1LIUCodingViolationErrs | read-only | current | This is the total number of Errored Seconds for the LIU Coding Violation. |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.11 | Columnsts1LIUPRBSErrs | read-only | current | This is the total number of Errored Seconds for the LIU PRBS check. |
| 1.3.6.1.4.1.644.2.4.2.3.2.2.1.12 | Columnsts1LIUCmdStatus | read-write | current | This is the command status for the LIU Mapper Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failu… |
| 1.3.6.1.4.1.644.3.4 | IdentityeriDNXSts1MIB | The ERI Enterprise MIB Module for the DNX STS1 Device. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VtGroupType | INTEGER { vt2-0-e1(0), vt1-5-ds1(1) } | current | Indicates the type of Virtual Tributaries (VT) grouping option used on the links. VT 1.5 is used to group T1 links into 7 groups of 4 for the 28 links. VT 2.0 is used to group E1 links into 7 groups of 3 for the 21 link… |