ERI-DNX-T3-MIB
40 objects
The ERI Enterprise MIB Module for the DNX T3 Device.
Imported Objects
| ERI-DNX-SMC-MIB | DecisionType devices dnx FunctionSwitch LinkCmdStatus LinkPortAddress PortStatus trapSequence |
| ERI-ROOT-SMI | eriMibs |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.1 | NodednxT3 | |||
| 1.3.6.1.4.1.644.2.4.2.1.0 | IdentitydnxT3Enterprise | current | ERI DNX T3 Enterprise for Alarms/Events | |
| 1.3.6.1.4.1.644.2.4.2.1.0.1 | Notificationt3PortConfigTrap | current | This trap is used to notify a NMS that a user has updated the configuration for a given T3 Port entry. | |
| 1.3.6.1.4.1.644.2.4.2.1.0.2 | Notificationt3T1ConfigTrap | current | This trap is used to notify a NMS that a user has updated the Link configuration for a given T3-T1 channel entry. | |
| 1.3.6.1.4.1.644.2.4.2.1.1 | Nodet3Config | |||
| 1.3.6.1.4.1.644.2.4.2.1.1.1 | Tablet3PortConfigTable | not-accessible | current | This is the T3 Port Configuration table which consists of an entry for each of the T3 cards. The total number of entries depends on the number of T3 cards in t… |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1 | Rowt3PortConfigEntry | not-accessible | current | The conceptual row of the T3 Port Configuration table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.1 | Columnt3CfgAddr | read-only | current | This number uniquely identifies a T3 slot/port. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.2 | Columnt3CfgResource | read-only | current | Uniquely identifies an T3 Port in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.3 | Columnt3CfgCircuitName | read-write | current | This is the user friendly text name to identify the circuit. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.4 | Columnt3FacilityId | read-write | current | This is a description of the facility where this equipment is located. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.5 | Columnt3EquipmentId | read-write | current | This is a description of the equipment in use. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.6 | Columnt3Location | read-write | current | This is the user description of the location for this equipment. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.7 | Columnt3FrameId | read-write | current | This is the description of the building where this equipment is located. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.8 | Columnt3UnitName | read-write | current | This is the description of the bay or device this equipment is part of. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.9 | Columnt3PortNumber | read-write | current | This is the user description of the DS3 port. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.10 | Columnt3Generator | read-write | current | This is the user description of the number generated by this equipment. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.11 | Columnt3M13OpMode | read-write | current | The framing selection for the DS1 to DS3 multiplexing. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.12 | Columnt3RcvLoopTiming | read-write | current | Enables or disables the DS3 transmit timing provided by the receive clock. When disabled, timing is provided by an on-board oscillator. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.13 | Columnt3ShortCable | read-write | current | Indicates the line build out of the DS3 transmitter. 'Yes' when attached to a cable less than 50 feet long. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.14 | Columnt3M13RemLoop | read-write | current | Controls the line codes used to set and reset DS1 remote line loopback requests. This applies the BellCore M13 mode only. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.15 | Columnt3RcvAIS | read-write | current | The Received bit pattern that will cause an error. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.16 | Columnt3XmtAIS | read-write | current | The Transmitted bit pattern that will cause an error. |
| 1.3.6.1.4.1.644.2.4.2.1.1.1.1.17 | Columnt3CmdStatus | read-write | current | The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.1.1.2 | Tablet3T1LinkConfigTable | not-accessible | current | This is the T3 T-1 Link Configuration table which consists of an entry for each of the card's 28 links. The total number of entries depends on the number of DS… |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1 | Rowt3T1LinkConfigEntry | not-accessible | current | The conceptual row of the T3 T-1 Link Configuration table. A row in this table cannot be added or deleted, only modified. |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.1 | Columnt3T1CfgLinkAddr | read-only | current | This number uniquely identifies a T3/T-1 link resource. This number will be used throughout the system to identify a unique resource. |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.2 | Columnt3T1CfgResource | read-only | current | Uniquely identifies an T3 T1 Channel in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table ent… |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.3 | Columnt3T1CfgLinkName | read-write | current | This is the user friendly text name to identify the link. |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.4 | Columnt3T1Status | read-write | current | Dictates the current status of the link, in-service or out-of-service. |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.5 | Columnt3T1Framing | read-write | current | Determines the type of framing used on the line. Choose between SuperFrame 'D4' or Extended SuperFrame (ESF). |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.6 | Columnt3T1Density | read-write | current | Determines the type of network signal used on the link. If line code is B8ZS, choose 'clear'. If line code is AMI, choose 62411. |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.7 | Columnt3T1NetLoop | read-write | current | Determines whether or not the module should respond to loop diagnostic commands received from the network supplier. Select 'enable' unless the commands are to … |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.8 | Columnt3T1YelAlrm | read-write | current | Causes the module to discard data and send a yellow alarm if it is in a red alarm condition after a 3 second period. 'Yes' must be chosen if the network suppli… |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.9 | Columnt3T1RecoverTime | read-write | current | This is the red alarm timeout value. Determines the amount of seconds the port will wait to stop sending the yellow alarm when coming out of a red alarm condit… |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.10 | Columnt3T1EsfFormat | read-write | current | Determines the type of ESF network commands the T-1 link will respond to. It has no meaning for D4 networks. With ESF networks, this information must be obtain… |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.11 | Columnt3T1IdleCode | read-write | current | Determines the whether the code that will be transmitted over the unused links will be 'idle' or 'busy' (all 1's). |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.12 | Columnt3T1CfgCmdStatus | read-write | current | The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success … |
| 1.3.6.1.4.1.644.2.4.2.1.2 | Nodet3Diag | |||
| 1.3.6.1.4.1.644.3.3 | IdentityeriDNXT3MIB | The ERI Enterprise MIB Module for the DNX T3 Device. |