HUAWEI-ADSL-EXT-MIB
568 objects
This MIB is used for defining Huawei's ADSL management MIB objects.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.31 | IdentityhwAdsl | This MIB is used for defining Huawei's ADSL management MIB objects. | ||
| 1.3.6.1.4.1.2011.6.31.1 | NodehwAdslMibObjects | |||
| 1.3.6.1.4.1.2011.6.31.1.1 | TablehwadslAturChanInfoTable | not-accessible | current | This table provides the channel parameters of the ATUR end of each port. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.1.1 | RowhwadslAturChanInfoEntry | not-accessible | current | This table provides the channel parameters of the ATUR end of each port. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.1.1.1 | ColumnhwadslAturChanCurrINPInfo | read-only | current | Indicates Impulse Noise Protection on upstream direction. The value multiply 1/10000 is the real value. Unit: DMT Symbol |
| 1.3.6.1.4.1.2011.6.31.1.1.1.2 | ColumnhwadslAturChanRsSymbolsInfo | read-only | current | Indicates Reed-Solomon symbols on upstream direction. The value multiply 1/10000 is the real value. Unit: byte |
| 1.3.6.1.4.1.2011.6.31.1.1.1.3 | ColumnhwadslAturChanRsRedundancyInfo | read-only | current | Indicates Reed-Solomon redundancy on upstream direction. Unit: byte |
| 1.3.6.1.4.1.2011.6.31.1.1.1.4 | ColumnhwadslAturChanRsDepthInfo | read-only | current | Indicates Reed-Solomon depth on upstream direction. Unit: byte |
| 1.3.6.1.4.1.2011.6.31.1.1.1.5 | ColumnhwadslAturChanSymbolLengthInfo | read-only | current | Indicates the Bit Number of the DMT Symbol on upstream direction. Unit: bit |
| 1.3.6.1.4.1.2011.6.31.1.1.1.6 | ColumnhwadslAturChanPhyRrrcBitsInfo | read-only | current | The bits in the channel that used to retransmission on upstream direction. |
| 1.3.6.1.4.1.2011.6.31.1.1.1.7 | ColumnhwadslAturChanPhyRtxQueueInfo | read-only | current | Queues in send buffer on upstream direction. |
| 1.3.6.1.4.1.2011.6.31.1.1.1.8 | ColumnhwadslAturChanRsSizeInfo | read-only | current | Indicates Reed-Solomon Codeword Size on upstream direction. Range: 0-255 Unit: byte |
| 1.3.6.1.4.1.2011.6.31.1.1.1.9 | ColumnhwadslAturChanCodeGainInfo | read-only | current | Indicates Code Gain on upstream direction. It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB). |
| 1.3.6.1.4.1.2011.6.31.1.1.1.10 | ColumnhwadslAturChanL2NetDataRate | read-only | current | In L2 state, this parameter reports the Net Data Rate in low power state. The data rate is coded in steps of 1000 bit/s. |
| 1.3.6.1.4.1.2011.6.31.1.2 | TablehwadslAturPhysInfoTable | not-accessible | current | This object provides the physical layer parameters of each ATUR. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.2.1 | RowhwadslAturPhysInfoEntry | not-accessible | current | This object provides the physical layer parameters of each ATUR. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.2.1.1 | ColumnhwadslAturTransmissionCapabilitiesInfo | read-only | current | The ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' me… |
| 1.3.6.1.4.1.2011.6.31.1.2.1.2 | ColumnhwAdslAturCurrSignalAtnInfo | read-only | current | The signal attenuation value on ATUR: It indicates the difference between the transmit signal of the ATU-C and the receive signal of the ATU-R. Range: 0-630 Un… |
| 1.3.6.1.4.1.2011.6.31.1.2.1.3 | ColumnhwadslAturInvG994VendorId | read-only | current | The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocat… |
| 1.3.6.1.4.1.2011.6.31.1.2.1.4 | ColumnhwadslAturLInvSelfTestResult | read-only | current | The ATU self-test result, coded as a 32-bit value. The most significant octet of the result is '0' if the self-test passed, and '1' if the self-test failed. Th… |
| 1.3.6.1.4.1.2011.6.31.1.3 | TablehwadslAtucChanInfoTable | not-accessible | current | This object provides the channel parameters of each ATUC. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.3.1 | RowhwadslAtucChanInfoEntry | not-accessible | current | This object provides the channel parameters of each ATUC. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.3.1.1 | ColumnhwadslAtucChanCurrINPInfo | read-only | current | Indicates Impulse Noise Protection on downstream direction. The value multiply 1/10000 is the real value. If retransmission is used in a given transmit directi… |
| 1.3.6.1.4.1.2011.6.31.1.3.1.2 | ColumnhwadslAtucChanRsSymbolsInfo | read-only | current | Indicates Reed-Solomon symbols on downstream direction. The value multiply 1/10000 is the real value. Unit: byte |
| 1.3.6.1.4.1.2011.6.31.1.3.1.3 | ColumnhwadslAtucChanRsRedundancyInfo | read-only | current | Indicates Reed-Solomon redundancy on downstream direction. Unit: byte |
| 1.3.6.1.4.1.2011.6.31.1.3.1.4 | ColumnhwadslAtucChanRsDepthInfo | read-only | current | Indicates Reed-Solomon depth on downstream direction. Unit: byte |
| 1.3.6.1.4.1.2011.6.31.1.3.1.5 | ColumnhwadslAtucChanSymbolLengthInfo | read-only | current | Indicates the Bit Number of the DMT Symbol on downstream direction. Unit: bit |
| 1.3.6.1.4.1.2011.6.31.1.3.1.6 | ColumnhwadslAtucChanPhyRrrcBitsInfo | read-only | current | The bits in the channel that used to retransmission on downstream direction. |
| 1.3.6.1.4.1.2011.6.31.1.3.1.7 | ColumnhwadslAtucChanPhyRtxQueueInfo | read-only | current | Queues in send buffer on downstream direction. |
| 1.3.6.1.4.1.2011.6.31.1.3.1.8 | ColumnhwadslAtucChanRsSizeInfo | read-only | current | Indicates Reed-Solomon Codeword Size on downstream direction. Range: 0-255 Unit: byte |
| 1.3.6.1.4.1.2011.6.31.1.3.1.9 | ColumnhwadslAtucChanCodeGainInfo | read-only | current | Indicates Code Gain on downstream direction. It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB). |
| 1.3.6.1.4.1.2011.6.31.1.3.1.10 | ColumnhwadslAtucChanPcbInfo | read-only | current | Indicates Power Cut-back on downstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB) Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.3.1.11 | ColumnhwadslAtucChanActNetDataRate | read-only | current | Independent whether retransmission is used or not in a given transmit direction: In L0 state, this parameter reports the Net Data Rate (as specified in G.992.3… |
| 1.3.6.1.4.1.2011.6.31.1.3.1.12 | ColumnhwadslAtucChanActINPAgainstREIN | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditio… |
| 1.3.6.1.4.1.2011.6.31.1.3.1.13 | ColumnhwadslAtucChanL2NetDataRate | read-only | current | In L2 state, this parameter reports the Net Data Rate in low power state. The data rate is coded in steps of 1000 bit/s. |
| 1.3.6.1.4.1.2011.6.31.1.4 | TablehwadslLineConfProfileCfgTable | not-accessible | current | This table contains information on the ADSL line configuration. The index of this table is adslLineConfProfileName. |
| 1.3.6.1.4.1.2011.6.31.1.4.1 | RowhwadslLineConfProfileCfgEntry | not-accessible | current | This table contains information on the ADSL line configuration. The index of this entry is adslLineConfProfileName. |
| 1.3.6.1.4.1.2011.6.31.1.4.1.1 | ColumnhwAdslAtucConfDownBitSwapCfg | read-create | current | Enables and disables the down bitswap of a template. Options: 1. enabled(1) - Indicates that the downstream bit swap is enabled 2. disabled(2) - Indicates that… |
| 1.3.6.1.4.1.2011.6.31.1.4.1.2 | ColumnhwAdslAtucConfUpBitSwapCfg | read-create | current | Enables and disables the up bitswap of a template. Options: 1. enabled(1) - Indicates that the upstream bit swap is enabled 2. disabled(2) - Indicates that the… |
| 1.3.6.1.4.1.2011.6.31.1.4.1.3 | ColumnhwAdslTrellionsModeEnableCfg | read-create | current | Enables and disables the Trellions mode. Options: 1. enabled(1) - Indicates that the trellis coding is enabled. 2. disabled(2) - Indicates that the trellis cod… |
| 1.3.6.1.4.1.2011.6.31.1.4.1.4 | ColumnhwAdslTransmissionModeCfg | read-create | current | Indicates the transmission mode of this channel. Options: 1. all(1) - All (G992.1, G992.2, T1.413)(Default) 2. fullRate(2) - Full rate(G992.1 or T1.413) 3. gli… |
| 1.3.6.1.4.1.2011.6.31.1.5 | TablehwAdslLinePvcCfgTable | not-accessible | current | PVC configuration table of the ADSL port. The indexes of this table are ifIndex,hwAdsllinePvcVpi,and hwAdsllinePvcVci. |
| 1.3.6.1.4.1.2011.6.31.1.5.1 | RowhwAdslLinePvcCfgEntry | not-accessible | current | PVC configuration table of the ADSL port. The indexes of this entry are ifIndex,hwAdsllinePvcVpi,and hwAdsllinePvcVci. |
| 1.3.6.1.4.1.2011.6.31.1.5.1.3 | ColumnhwAdslLinePvcVlanIdCfg | read-write | current | The VLAN ID of the adsl line PVC. Range: 1-4000 |
| 1.3.6.1.4.1.2011.6.31.1.5.1.4 | ColumnhwAdslLinePvcPriorityCfg | read-write | current | The Priority value of the adsl line PVC. Range: 0-7 Default: 0 |
| 1.3.6.1.4.1.2011.6.31.1.5.1.5 | ColumnhwAdslLinePvcDsBandCfg | read-write | current | The down stream band of the adsl line PVC. Range: 0-450 Default: 0 |
| 1.3.6.1.4.1.2011.6.31.1.5.1.6 | ColumnhwAdslLinePvcUsBandCfg | read-write | current | The up stream band of the adsl line PVC. Range: 0-450 |
| 1.3.6.1.4.1.2011.6.31.1.5.1.7 | ColumnhwAdslLinePvcMCastEnableCfg | read-write | current | This object allows the adsl line PVC to support multicast. Options: 1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support the multicast … |
| 1.3.6.1.4.1.2011.6.31.1.5.1.8 | ColumnhwAdslLinePvcIGMPEnableCfg | read-write | current | This object allows the adsl line PVC to support IGMP. Options: 1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support IGMP 2. disable(2) … |
| 1.3.6.1.4.1.2011.6.31.1.5.1.9 | ColumnhwAdslLinePvcIndexCfg | read-write | current | The index of the adsl line PVC. Range: 1-8 |
| 1.3.6.1.4.1.2011.6.31.1.5.1.10 | ColumnhwAdslLinePvcConnectTypeCfg | read-only | current | The Connected type of the adsl line PVC Options: 1. auto(0) - The Connected type of the adsl line PVC is auto 2. llc1483B(1) - The Connected type of the adsl l… |
| 1.3.6.1.4.1.2011.6.31.1.5.1.11 | ColumnhwAdslLinePvcRowStatusCfg | read-create | current | Row status. Add or delete a table item. |
| 1.3.6.1.4.1.2011.6.31.1.6 | TablehwadslLineCfgTable | not-accessible | current | This table includes common attributes describing both ends of the line. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.6.1 | RowhwadslLineCfgEntry | not-accessible | current | This table includes common attributes describing both ends of the line. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.6.1.1 | ColumnhwadslLineExtConfProfileCfg | read-write | current | The value of this object identifies the row in the ADSL Extend Line Configuration Profile Table, (adslLineExtConfProfileTable), which applies to this ADSL line… |
| 1.3.6.1.4.1.2011.6.31.1.6.1.2 | ColumnhwadslLineDynamicProfileCfg | read-write | current | The value of this object identifies the row in the ADSL Dynamic Profile Table,which applies to this ADSL line, and channels if applicable. NULL - indicates tha… |
| 1.3.6.1.4.1.2011.6.31.1.7 | TablehwAdslLineBitAllocationInfoTable | not-accessible | current | This hwAdslLineBitAllocationInfoTable contains the detailed bit-allocation information for the current link. This information can be used to determine whether … |
| 1.3.6.1.4.1.2011.6.31.1.7.1 | RowhwAdslLineBitAllocationInfoEntry | not-accessible | current | This hwAdslLineBitAllocationInfoTable contains the detailed bit-allocation information for the current link. This information can be used to determine whether … |
| 1.3.6.1.4.1.2011.6.31.1.7.1.1 | ColumnhwAdslLineDownStreamBitsPerFrameInfo | read-only | current | Number of bits required per frame in the downstream data path for the current configuration. |
| 1.3.6.1.4.1.2011.6.31.1.7.1.2 | ColumnhwAdslLineUpStreamBitsPerFrameInfo | read-only | current | Number of bits required per frame in the upstream data path for the current configuration. |
| 1.3.6.1.4.1.2011.6.31.1.7.1.3 | ColumnhwAdslLineDownStreamBitAllocLowInfo | read-only | current | when used to Adsl board This object contains the first 128 downstream sub-carrier bit allocations (sub-carrier # 1-128). This object is 64 bytes in length, whe… |
| 1.3.6.1.4.1.2011.6.31.1.7.1.4 | ColumnhwAdslLineDownStreamBitAllocHighInfo | read-only | current | when used to Adsl board This object contains the second 128 downstream sub-carrier bit allocations (sub-carrier # 129-256). This object is 64 bytes in length, … |
| 1.3.6.1.4.1.2011.6.31.1.7.1.5 | ColumnhwAdslLineUpStreamBitAllocInfo | read-only | current | when used to Adsl board This Object contains 64 upstream sub-carrier bit allocations (sub-carrier # 1-64). This Object is 32 bytes in length, where each byte c… |
| 1.3.6.1.4.1.2011.6.31.1.8 | TablehwXdslPortCfgTable | not-accessible | current | This table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information. Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports The index of this t… |
| 1.3.6.1.4.1.2011.6.31.1.8.1 | RowhwXdslPortCfgEntry | not-accessible | current | This table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information. Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports The index of this e… |
| 1.3.6.1.4.1.2011.6.31.1.8.1.1 | ColumnhwXdslPortMaxMacLearnCfg | read-write | current | Set Max MAC count on the xDSL port. Range: 0-255 Default: 255 |
| 1.3.6.1.4.1.2011.6.31.1.8.1.2 | ColumnhwXdslPortRateMonitorThresholdCfg | read-write | current | Set Port monitoring rate threshold percent. Including upstream and downstream. Range: 0-100 Default: 0 |
| 1.3.6.1.4.1.2011.6.31.1.8.1.3 | ColumnhwXdslPortUpThresholdTxRateCfg | read-write | current | Set Port monitoring upstream rate threshold value. Default: 0 Unit:bps |
| 1.3.6.1.4.1.2011.6.31.1.8.1.4 | ColumnhwXdslPortDownThresholdTxRateCfg | read-write | current | Set Port monitoring downstream rate threshold value. Default: 0 Unit:bps |
| 1.3.6.1.4.1.2011.6.31.1.8.1.5 | ColumnhwXdslPortRateMonitorAlarmEnableCfg | read-write | current | Enables or disables port rate monitor alarm. Options: 1. enabled(1) - Enables port rate monitor alarm 2. disabled(2) - Disables port rate monitor alarm |
| 1.3.6.1.4.1.2011.6.31.1.8.1.6 | ColumnhwXdslPortUpTimeCfg | read-only | current | Duration of the xDSL port activation Unit: second |
| 1.3.6.1.4.1.2011.6.31.1.8.1.7 | ColumnhwXdslPortNTEPowerStatusCfg | read-only | current | NTE power status, this object is defaulted off(2). Options: 1. on(1) - NTE power status is on 2. off(2) - NTE power status is off 3. unknown(3) - NTE power is … |
| 1.3.6.1.4.1.2011.6.31.1.8.1.8 | ColumnhwXdslPortCurrentUpRateCfg | accessible-for-notify | current | Xdsl port current upstream value. Range: 0-30000 Default: 0 |
| 1.3.6.1.4.1.2011.6.31.1.8.1.9 | ColumnhwXdslPortCurrentDownRateCfg | accessible-for-notify | current | Xdsl port current downstream value. Range: 0-30000 Default: 0 |
| 1.3.6.1.4.1.2011.6.31.1.8.1.10 | ColumnhwXdslPortFarEndRunStateCfg | read-only | current | Remote running status of the xDSL port. This object is defaulted unknown(1). Options: 1. unknown(1) - Unknown status 2. noModem(2) - Port is not connected to m… |
| 1.3.6.1.4.1.2011.6.31.1.8.1.11 | ColumnhwXdslPortPowerStateCfg | read-only | current | Xdsl port power state. Options: 1. l0(1) - Full-on state 2. l2(2) - Low power state 3. l3(3) - Idle state 4. l1(4) - Low power state 5. invalidValue(-1) - Inva… |
| 1.3.6.1.4.1.2011.6.31.1.8.1.12 | ColumnhwXdslPortUpCntCfg | read-only | current | The up counts of xDSL port. |
| 1.3.6.1.4.1.2011.6.31.1.8.1.13 | ColumnhwXdslPortUpCntAdminStatusCfg | read-write | current | Admin the up counts of xDSL port. Options: 1. reset(0) - Reset the up counts of xDSL port |
| 1.3.6.1.4.1.2011.6.31.1.8.1.14 | ColumnhwXdslPortLastUpTimeCfg | read-only | current | Last up time of a xDSL port. |
| 1.3.6.1.4.1.2011.6.31.1.8.1.15 | ColumnhwXdslPortLastDownTimeCfg | read-only | current | Last down time of a xDSL port. |
| 1.3.6.1.4.1.2011.6.31.1.8.1.16 | ColumnhwXdslPortClearUpCntTimeCfg | read-only | current | The time when up counts of a xDSL port is cleared. |
| 1.3.6.1.4.1.2011.6.31.1.8.1.17 | ColumnhwXdslPortRetrainCntCfg | read-only | current | The retrain counts of xDSL Line. |
| 1.3.6.1.4.1.2011.6.31.1.8.1.18 | ColumnhwXdslPortLastRetrainReasonCfg | read-only | current | The last retrain reson of xDSL Line, coded as bit mask. Only one bit can be set valid, all bits set valid means invalid retrain reason. |
| 1.3.6.1.4.1.2011.6.31.1.8.1.19 | ColumnhwXdslPortLoopFlagCfg | read-only | current | Loop flag. Options: 1. false(0) - No loop 2. true (1) - Loop |
| 1.3.6.1.4.1.2011.6.31.1.8.1.20 | ColumnhwXdslPortUpThresholdCfg | read-write | current | Set Port monitoring upstream rate threshold percent value. Range: 0-100 Default: 0 |
| 1.3.6.1.4.1.2011.6.31.1.8.1.21 | ColumnhwXdslPortDownThresholdCfg | read-write | current | Set Port monitoring downstream rate threshold percent value. Range: 0-100 Default: 0 |
| 1.3.6.1.4.1.2011.6.31.1.9 | TablehwAdslLinePreActParaInfoTable | not-accessible | current | This table provides one row for each ADSL PORT. Each row contains the preactived parameters. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.9.1 | RowhwAdslLinePreActParaInfoEntry | not-accessible | current | This table provides one row for each ADSL PORT. Each row contains the preactived parameters. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.9.1.1 | ColumnhwAdslAtucPrevSnrMgnInfo | read-only | current | Noise Margin as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.9.1.2 | ColumnhwAdslAturPrevSnrMgnInfo | read-only | current | Noise Margin as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.9.1.3 | ColumnhwAdslAtucPrevAttainableRateInfo | read-only | current | Indicates the maximum attainable data rate by the ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.9.1.4 | ColumnhwAdslAturPrevAttainableRateInfo | read-only | current | Indicates the maximum attainable data rate by the ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.9.1.5 | ColumnhwAdslAtucPreAtnInfo | read-only | current | Measured difference in the total power transmitted as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.9.1.6 | ColumnhwAdslAturPreAtnInfo | read-only | current | Measured difference in the total power transmitted as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.9.1.7 | ColumnhwAdslPreActiveTimeInfo | read-only | current | The last time at that the port was activated. |
| 1.3.6.1.4.1.2011.6.31.1.10 | TablehwPortThreePriorityCfgTable | not-accessible | obsolete | Adsl port three priority table. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.10.1 | RowhwPortThreePriorityCfgEntry | not-accessible | obsolete | Adsl port three priority table. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.10.1.1 | ColumnhwPortThreePriorityEnableCfg | read-write | obsolete | Three Priority status of the interface. Options: 1. enable(1) - Adsl port three priority is enabled 2. disable(2) - Adsl port three priority is disabled |
| 1.3.6.1.4.1.2011.6.31.1.11 | TablehwSlotMacMaxNoLimitCfgTable | not-accessible | obsolete | Max mac learning no limit table. The indexes of this table are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.31.1.11.1 | RowhwSlotMacMaxNoLimitCfgEntry | not-accessible | obsolete | Max mac learning no limit table. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.31.1.11.1.1 | ColumnhwSlotMacMaxNoLimitEnableCfg | read-write | obsolete | This object is used to set whether all the ports in the slot limits the maximum number of learning MAC addresses. Options: 1. enable(1) - Don't limit the max N… |
| 1.3.6.1.4.1.2011.6.31.1.12 | TablehwXdslPortStateStatisticInfoTable | not-accessible | current | XDSL port state staticstic table. Used to support the statistics information about the status mapping and status of ports on service boards, such as the ADSL, … |
| 1.3.6.1.4.1.2011.6.31.1.12.1 | RowhwXdslPortStateStatisticInfoEntry | not-accessible | current | XDSL port state staticstic table. Used to support the statistics information about the status mapping and status of ports on service boards, such as the ADSL, … |
| 1.3.6.1.4.1.2011.6.31.1.12.1.1 | ColumnhwXdslPortStatePortNumberInfo | read-only | current | This object is port number of one slot. |
| 1.3.6.1.4.1.2011.6.31.1.12.1.2 | ColumnhwXdslPortStateBitmapListInfo | read-only | current | The type of port status: 2 failed; 8 testing; 9 activated; 10 activating; 11 deactivated; 18 localloopback; 19 remoteloopback; 20 blocked; 37 utopialoopback; 3… |
| 1.3.6.1.4.1.2011.6.31.1.12.1.3 | ColumnhwXdslTotalOfActivatedPortsInfo | read-only | current | The total of the activated ports. |
| 1.3.6.1.4.1.2011.6.31.1.12.1.4 | ColumnhwXdslTotalOfDeactivatedPortsInfo | read-only | current | The total of the deactivated ports. |
| 1.3.6.1.4.1.2011.6.31.1.12.1.5 | ColumnhwXdslTotalOfActivatingPortsInfo | read-only | current | The total of the activating ports. |
| 1.3.6.1.4.1.2011.6.31.1.12.1.6 | ColumnhwXdslTotalOfTestingPortsInfo | read-only | current | The total of the Testing ports. |
| 1.3.6.1.4.1.2011.6.31.1.12.1.7 | ColumnhwXdslTotalOfBlockedPortsInfo | read-only | current | The total of the blocked ports. |
| 1.3.6.1.4.1.2011.6.31.1.12.1.8 | ColumnhwXdslTotalOfLocalLoopbackPortsInfo | read-only | current | The total of the local testing ports. |
| 1.3.6.1.4.1.2011.6.31.1.12.1.9 | ColumnhwXdslTotalOfRemoteLoopbackPortsInfo | read-only | current | The total of the remote testing ports. |
| 1.3.6.1.4.1.2011.6.31.1.12.1.10 | ColumnhwXdslTotalOfFailedPortsInfo | read-only | current | The total of the failed ports. |
| 1.3.6.1.4.1.2011.6.31.1.12.1.11 | ColumnhwXdslTotalOfUnknownPortsInfo | read-only | current | The total of the unknown xDSL ports. |
| 1.3.6.1.4.1.2011.6.31.1.13 | TablehwadslLineExtConfProfileCfgTable | not-accessible | current | This table contains information on the ADSL extend line configuration. One entry in this table reflects a extend line profile defined by a manager which can be… |
| 1.3.6.1.4.1.2011.6.31.1.13.1 | RowhwadslLineExtConfProfileCfgEntry | not-accessible | current | This table contains information on the ADSL extend line configuration. One entry in this table reflects a extend line profile defined by a manager which can be… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.1 | ColumnhwadslLineExtConfProfileNameCfg | not-accessible | current | This object is used by the hwadslLineExtConfProfileTable in order to identify a row of this table. Indicates the name of the extended line profile. |
| 1.3.6.1.4.1.2011.6.31.1.13.1.2 | ColumnhwadslLineDisableToneSection1BeginCfg | read-create | current | The begin index of the first section. Range: 0-511 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.3 | ColumnhwadslLineDisableToneSection1EndCfg | read-create | current | The end index of the first section. Range: 0-511 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.4 | ColumnhwadslLineDisableToneSection1FlagCfg | read-create | current | The enable flag of the first section. Options: 1. enabled(1) - The first tone section is enabled 2. disabled(2) - The first tone section is disabled |
| 1.3.6.1.4.1.2011.6.31.1.13.1.5 | ColumnhwadslLineDisableToneSection2BeginCfg | read-create | current | The begin index of the second section. Range: 0-511 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.6 | ColumnhwadslLineDisableToneSection2EndCfg | read-create | current | The end index of the second section. Range: 0-511 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.7 | ColumnhwadslLineDisableToneSection2FlagCfg | read-create | current | The enable flag of the second section. Options: 1. enabled(1) - The second tone section is enabled 2. disabled(2) - The second tone section is disabled |
| 1.3.6.1.4.1.2011.6.31.1.13.1.8 | ColumnhwadslLineDisableToneSection3BeginCfg | read-create | current | The begin index of the third section. Range: 0-511 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.9 | ColumnhwadslLineDisableToneSection3EndCfg | read-create | current | The end index of the third section. Range: 0-511 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.10 | ColumnhwadslLineDisableToneSection3FlagCfg | read-create | current | The enable flag of the third section. Options: 1. enabled(1) - The third tone section is enabled 2. disabled(2) - The third tone section is disabled |
| 1.3.6.1.4.1.2011.6.31.1.13.1.11 | ColumnhwadslLineDisableToneSection4BeginCfg | read-create | current | The begin index of the fourth section. Range: 0-511 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.12 | ColumnhwadslLineDisableToneSection4EndCfg | read-create | current | The end index of the fourth section. Range: 0-511 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.13 | ColumnhwadslLineDisableToneSection4FlagCfg | read-create | current | The enable flag of the fourth section. Options: 1. enabled(1) - The fourth tone section is enabled 2. disabled(2) - The fourth tone section is disabled |
| 1.3.6.1.4.1.2011.6.31.1.13.1.14 | Columnhwadsl2ChConfProfMinProtectionDsCfg | read-write | current | If retransmission is not used in downstream direction,this parameter is minimum impulse noise protection on downstream direction. The minimum impulse noise pro… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.15 | Columnhwadsl2ChConfProfMinProtectionUsCfg | read-write | current | If retransmission is not used in upstream direction,this parameter is minimum impulse noise protection on upstream direction. The minimum impulse noise protect… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.16 | ColumnhwAdslExtDsMinTrainSnrMgnCfg | read-create | current | Maximum Trainning Margin in downstream. Range: 0-310 Default: 30 Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.13.1.17 | ColumnhwAdslExtUsMinTrainSnrMgnCfg | read-create | current | Maximum Trainning Margin in upstream. Range: 0-310 Default: 30 Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.13.1.18 | ColumnhwAdslExtDsMaxPsdCfg | read-create | current | Maximum PSD margin in downstream. |
| 1.3.6.1.4.1.2011.6.31.1.13.1.19 | Columnhwadsl2TSSiPsdMaskDsCfg | read-write | current | The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G992.3 or G992.5 and it may impose PSD restrictions (breakpoint… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.20 | Columnhwadsl2TranMissionStardardMaskCfg | read-write | current | The transmission stardard mask . The Mask bit and the corresponding Transmission Standard: 0x 1 1 1 1 1 1 ETSI T1.413 G992.5 G992.3 G992.2 G992.1 The Default B… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.21 | Columnhwadsl2TransMissionAnnexMaskCfg | read-write | current | The transMission annex Mask. The Mask bit and the corresponding Transmission Annex: 0x 1 1 1 1 1 Annex .J Annex .M Annex .L Annex .B Annex .A The Default BitMa… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.22 | Columnhwadsl2TransMissionAnnexMScopeCfg | read-create | current | Annex M expand scope: 1-Tone Index(7~32) 2-Tone Index(7~36) 3-Tone Index(7~40) 4-Tone Index(7~44) 5-Tone Index(7~48) 6-Tone Index(7~52) 7-Tone Index(7~56) 8-To… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.23 | Columnhwadsl2L2ModeStateCfg | read-create | current | The state of L2 power management mode. Options: 1. disabled(1) - The L2 power management mode is disabled 2. enabled(2) - The L2 power management mode is enabl… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.24 | Columnhwadsl2L2ModeMinDataRateCfg | read-create | current | Minimum data rate in L2 mode. Range: 128-16384 Default: 256 Unit: Kbps |
| 1.3.6.1.4.1.2011.6.31.1.13.1.25 | Columnhwadsl2L2ModeMaxDataRateCfg | read-create | current | Maximum data rate in L2 mode. Range: 128-16384 Default: 1024 Unit: Kbps |
| 1.3.6.1.4.1.2011.6.31.1.13.1.26 | Columnhwadsl2L2ModePayloadRateThresholdCfg | read-create | current | Threshold for the Payload Rate Ratio. Range: 128-16384 Default: 128 Unit: Kbps |
| 1.3.6.1.4.1.2011.6.31.1.13.1.27 | Columnhwadsl2L2ModeGuardTimeCfg | read-create | current | Guard time before entering L2 mode. Range: 0-1024 Default: 60 Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.13.1.28 | Columnhwadsl2L2ModeIntervalTimeCfg | read-create | current | The minimum interval between two records of L2 mode. Range: 0-255 Default: 255 Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.13.1.29 | Columnhwadsl2L2ModeIntervalPowerValueCfg | read-create | current | Maximum aggregate transmit power reduction per L2 request or L2 power trim. Range: 0-31 Default: 3 Unit: db |
| 1.3.6.1.4.1.2011.6.31.1.13.1.30 | Columnhwadsl2L2ModeTotalPowerValueCfg | read-create | current | Total maximum aggregate transmit power reduction in L2. Range: 0-31 Default: 9 Unit: db |
| 1.3.6.1.4.1.2011.6.31.1.13.1.31 | ColumnhwadslExtUsPhyRcontrolCfg | read-write | current | To enable or disable the PHY-R function on upstream direction. Options: 1. enable(1) - The PHY-R function on upstream direction is enabled 2. disable(2) - The … |
| 1.3.6.1.4.1.2011.6.31.1.13.1.32 | ColumnhwadslExtUsINPmaxCfg | read-write | current | Maximum Impulse Noise Protection on upstream direction. The parameter can take the following values: noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbol… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.33 | ColumnhwadslExtUsMinRtxRatioCfg | read-write | current | Minimum rtx ratio on upstream direction. Range: 0-255 Default: 0 Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.34 | ColumnhwadslExtUsMinRSoverheadCfg | read-write | current | The minimum value of R/N on upstream direction. Range: 0-128 Default: 0 Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.35 | ColumnhwadslExtDsPhyRcontrolCfg | read-write | current | To enable or disable the PHY-R function on downstream direction. Options: 1. enable(1) - The PHY-R function on downstream direction is enabled 2. disable(2) - … |
| 1.3.6.1.4.1.2011.6.31.1.13.1.36 | ColumnhwadslExtDsINPmaxCfg | read-write | current | Maximum Impulse Noise Protection on downstream direction. The parameter can take the following values: noProtection(1), halfSymbol(2), singleSymbol(3), twoSymb… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.37 | ColumnhwadslExtDsMinRtxRatioCfg | read-write | current | Minimum rtx ratio on downstream direction. Range: 0-255 Default: 0 Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.38 | ColumnhwadslExtDsMinRSoverheadCfg | read-write | current | The minimum value of R/N on downstream direction. Range: 0-128 Default: 0 Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.31.1.13.1.39 | Columnhwadsl2TSSiPsdMaskUsCfg | read-write | current | The upstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G992.3 or G992.5 and it may impose PSD restrictions (breakpoints)… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.40 | ColumnhwadslLConfProfAdslModeCfg | read-write | current | The ADSL2 management model specified includes an ADSL Mode attribute which identifies an instance of ADSL Mode-Specific PSD Configuration object in the ADSL Li… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.41 | ColumnhwadslLineExtConfProfileRowStatusCfg | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.42 | Columnhwadsl2L2ModeL2TimeCfg | read-create | current | This minimum time (in seconds) between an entry into the L2 state and the first power trim in the L2 state and between two consecutive power trims in the L2 St… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.43 | ColumnhwadslLineExtConfProfRtxModeDs | read-create | current | The mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.44 | ColumnhwadslLineExtConfProfLeftrThreshDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fracti… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.45 | ColumnhwadslLineExtConfProfMinEtrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.46 | ColumnhwadslLineExtConfProfMaxEtrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maxmum expected throughput for the bearer channel.The values range in steps of … |
| 1.3.6.1.4.1.2011.6.31.1.13.1.47 | ColumnhwadslLineExtConfProfMaxNdrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.48 | ColumnhwadslLineExtConfProfMaxDelayRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (s… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.49 | ColumnhwadslLineExtConfProfMinDelayRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (s… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.50 | ColumnhwadslLineExtConfProfMinInpShineRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is … |
| 1.3.6.1.4.1.2011.6.31.1.13.1.51 | ColumnhwadslLineExtConfProfShineRatioRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.52 | ColumnhwadslLineExtConfProfMinInpReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.53 | ColumnhwadslLineExtConfProfIatReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequ… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.54 | Columnhwadsl2LExtLineProfReferenceClock | read-create | current | This object configures the clock reference for the ATU-C in an ADSL line. Represented as an enumeration. Options: 1. freeRun(1) - Indicates the local clock 2. … |
| 1.3.6.1.4.1.2011.6.31.1.13.1.55 | Columnhwadsl2LExtLineProfRfiBands | read-create | current | The RFI notch parameter. It is a string consist of begin tone index, end tone index. This is a string of 4 groups of values in the following structure: Octets … |
| 1.3.6.1.4.1.2011.6.31.1.13.1.56 | Columnhwadsl2LExtLineProfDpboEPsd | read-create | current | This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number o… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.57 | Columnhwadsl2LExtLineProfDpboEsEL | read-create | current | This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.58 | Columnhwadsl2LExtLineProfDpboEselMin | read-create | current | DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and ADSL2 provision of additional K… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.59 | Columnhwadsl2LExtLineProfDpboEsCableModelA | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.60 | Columnhwadsl2LExtLineProfDpboEsCableModelB | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.61 | Columnhwadsl2LExtLineProfDpboEsCableModelC | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.62 | Columnhwadsl2LExtLineProfDpboMus | read-create | current | DPBOMUS defines the assumed minimum usable receive signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shal… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.63 | Columnhwadsl2LExtLineProfDpboFMin | read-create | current | DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multip… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.64 | Columnhwadsl2LExtLineProfDpboFMax | read-create | current | DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.65 | Columnhwadsl2LExtLineProfMaxNomPsdUs | read-create | current | Maximum PSD margin in upstream. |
| 1.3.6.1.4.1.2011.6.31.1.13.1.66 | Columnhwadsl2LExtLineProfMaxNomAtpDs | read-create | current | The maximum nominal aggregate transmit power in the downstream direction during initialization and showtime. It ranges from 0 to 255 units of 0.1 dBm (physical… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.67 | Columnhwadsl2LExtLineProfMaxNomAtpUs | read-create | current | The maximum nominal aggregate transmit power in the upstream direction during initialization and showtime. It ranges from 0 to 255 units of 0.1 dBm (physical v… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.68 | Columnhwadsl2LExtLineProfInmIatoDs | read-create | current | The parameter of downstream impulse noise monitoring inter arrival time offset. This is the inter arrival time offset that the xTU receiver shall use to determ… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.69 | Columnhwadsl2LExtLineProfInmIatsDs | read-create | current | The parameter of downstream impulse noise monitoring inter arrival time step. This is the inter arrival time step that the xTU receiver shall use to determine … |
| 1.3.6.1.4.1.2011.6.31.1.13.1.70 | Columnhwadsl2LExtLineProfInmCcDs | read-create | current | The parameter of downstream impulse noise monitoring cluster continuation value. This is the cluster continuation value that the xTU receiver shall use in the … |
| 1.3.6.1.4.1.2011.6.31.1.13.1.71 | Columnhwadsl2LExtLineProfInmInpeqModeDs | read-create | current | The parameter of downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.72 | Columnhwadsl2LExtLineProfForceInpDs | read-create | current | The parameter indicates that the framer settings of the upstream bearer shall be selected such that the impulse noise protection computed according to the form… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.73 | Columnhwadsl2LExtLineProfForceInpUs | read-create | current | The parameter indicates that the framer settings of the upstream bearer shall be selected such that the impulse noise protection computed according to the form… |
| 1.3.6.1.4.1.2011.6.31.1.13.1.74 | Columnhwadsl2LExtLineProfInitPolicy | read-create | current | If retransmission is not used in a given transmit direction, this parameter indicates which policy shall be applied to determine the transceiver configuration … |
| 1.3.6.1.4.1.2011.6.31.1.13.1.75 | Columnhwadsl2LExtLineProfL3Time | read-create | current | This minimum time (in seconds) between an entry into the L3 state and the L0 or L2 state. |
| 1.3.6.1.4.1.2011.6.31.1.13.1.76 | Columnhwadsl2LExtLineProfL3ModeState | read-create | current | Power management state enabling. The state of L3 power management mode. Options: 1. enabled(1) - The L3 power management mode is enabled 2. disabled(2) - The L… |
| 1.3.6.1.4.1.2011.6.31.1.14 | TablehwAdslLineLatestActParaInfoTable | not-accessible | current | This table provides one row for each ADSL port. Each row contains the latest actived parameters. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.14.1 | RowhwAdslLineLatestActParaInfoEntry | not-accessible | current | This table provides one row for each ADSL port. Each row contains the latest actived parameters. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.14.1.1 | ColumnhwAdslLineLatestActiveTimeInfo | read-only | current | Actual time when latest actived. |
| 1.3.6.1.4.1.2011.6.31.1.14.1.2 | ColumnhwAdslLineLatestDeactiveTimeInfo | read-only | current | Actual time when latest deactived. If port is actived, the value is invalid. |
| 1.3.6.1.4.1.2011.6.31.1.14.1.3 | ColumnhwAdslAtucLatestTxRateInfo | read-only | current | Actual transmit rate on this channel when latest actived. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.14.1.4 | ColumnhwAdslAturLatestTxRateInfo | read-only | current | Actual transmit rate on this channel when latest actived. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.14.1.5 | ColumnhwAdslAtucLatestSnrMgnInfo | read-only | current | Noise Margin as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB. |
| 1.3.6.1.4.1.2011.6.31.1.14.1.6 | ColumnhwAdslAturLatestSnrMgnInfo | read-only | current | Noise Margin as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB. |
| 1.3.6.1.4.1.2011.6.31.1.14.1.7 | ColumnhwAdslAtucLatestAtnInfo | read-only | current | Measured difference in the total power transmitted as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB. |
| 1.3.6.1.4.1.2011.6.31.1.14.1.8 | ColumnhwAdslAturLatestAtnInfo | read-only | current | Measured difference in the total power transmitted as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB. |
| 1.3.6.1.4.1.2011.6.31.1.14.1.9 | ColumnhwAdslAtucLatestAttainableRateInfo | read-only | current | Indicates the maximum attainable data rate by the ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.14.1.10 | ColumnhwAdslAturLatestAttainableRateInfo | read-only | current | Indicates the maximum attainable data rate by the ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.14.1.11 | ColumnhwAdslAtucLatestConfTxRateInfo | read-only | current | Configured transmit rate for ADSL port. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Unit:… |
| 1.3.6.1.4.1.2011.6.31.1.14.1.12 | ColumnhwAdslAturLatestConfTxRateInfo | read-only | current | Configured receive rate for ADSL port. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Unit: … |
| 1.3.6.1.4.1.2011.6.31.1.14.1.13 | ColumnhwAdslAtucLatestInterleaveDelayInfo | read-only | current | Interleave delay for this channel when latest actived. Unit: milliseconds |
| 1.3.6.1.4.1.2011.6.31.1.14.1.14 | ColumnhwAdslAturLatestInterleaveDelayInfo | read-only | current | Interleave delay for this channel when latest actived. Unit: milliseconds |
| 1.3.6.1.4.1.2011.6.31.1.14.1.15 | ColumnhwAdslAtucLatestTargetSnrMgnInfo | read-only | current | Port Signal/Noise Margin. Range: 0-310 Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.14.1.16 | ColumnhwAdslAturLatestTargetSnrMgnInfo | read-only | current | Port Signal/Noise Margin. Range: 0-310 Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.14.1.17 | ColumnhwAdslAtucLatestTxRateThresholdInfo | read-only | current | Port down stream threshold. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.14.1.18 | ColumnhwAdslAturLatestTxRateThresholdInfo | read-only | current | Port up stream threshold. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.15 | TablehwXdslPortPerformanceStatInfoTable | not-accessible | current | XDSL port performance staticstic table. The indexes of this table are ifIndex and hwXdslPort15minutesPerformanceIntervalInfo. |
| 1.3.6.1.4.1.2011.6.31.1.15.1 | RowhwXdslPortPerformanceStatInfoEntry | not-accessible | current | XDSL port performance staticstic table. The indexes of this entry are ifIndex and hwXdslPort15minutesPerformanceIntervalInfo. |
| 1.3.6.1.4.1.2011.6.31.1.15.1.1 | ColumnhwXdslPort15minutesPerformanceIntervalInfo | not-accessible | current | The index of the interval which is queried. Range: 0-96 |
| 1.3.6.1.4.1.2011.6.31.1.15.1.2 | ColumnhwXdslPort15minutesPerformanceInBytesInfo | read-only | current | Read the receive bytes of xDSL port during 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.15.1.3 | ColumnhwXdslPort15minutesPerformanceOutBytesInfo | read-only | current | Read the transmit bytes of xDSL port during 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.15.1.4 | ColumnhwXdslPortSyncSuccNumberInfo | read-only | current | Number of successful activations of the ADSL/G.SHDSL port within 15 minutes |
| 1.3.6.1.4.1.2011.6.31.1.15.1.5 | ColumnhwXdslPortSyncFailNumberInfo | read-only | current | Number of failed activations of the ADSL/G.SHDSL port within 15 minutes |
| 1.3.6.1.4.1.2011.6.31.1.15.1.6 | ColumnhwXdslPortAtucCodeViolationInfo | read-only | current | Number of head errors of the ATUC cell within 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.15.1.7 | ColumnhwXdslPortAturCodeViolationInfo | read-only | current | Number of head errors of the ATUR cell within 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.15.1.8 | ColumnhwXdslPortAtucFecSecondsInfo | read-only | current | Seconds of the ATUC FEC errors within 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.15.1.9 | ColumnhwXdslPortAturFecSecondsInfo | read-only | current | Seconds of the ATUR FEC errors within 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.15.1.10 | ColumnhwXdslPortCurrent15minutesStatTimeInfo | read-only | current | Read the Stat. time of current 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.16 | TablehwadslAtucPhysInfoTable | not-accessible | current | This table provides the physical layer parameters of each ATUC. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.16.1 | RowhwadslAtucPhysInfoEntry | not-accessible | current | This table provides the physical layer parameters of each ATUC. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.16.1.1 | ColumnhwAdslAtucCurrTransModeInfo | read-only | current | A set of ADSL line transmission modes. |
| 1.3.6.1.4.1.2011.6.31.1.16.1.2 | ColumnhwAdslAtucCurrSignalAtnInfo | read-only | current | Current signal attenuation of the ATU-C, indicating the difference between the transmit signal of the ATU-R and the receive signal of the ATU-C. Range: 0-630 U… |
| 1.3.6.1.4.1.2011.6.31.1.16.1.3 | ColumnhwadslAtucInvG994VendorId | read-only | current | The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocat… |
| 1.3.6.1.4.1.2011.6.31.1.16.1.4 | ColumnhwadslAtucLInvSelfTestResult | read-only | current | The ATU self-test result, coded as a 32-bit value. The most significant octet of the result is '0' if the self-test passed, and '1' if the self-test failed. Th… |
| 1.3.6.1.4.1.2011.6.31.1.16.1.5 | ColumnhwadslAtucTransmissionCapabilitiesInfo | read-only | current | The ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' me… |
| 1.3.6.1.4.1.2011.6.31.1.17 | TablehwadslLineExtInfoTable | not-accessible | current | This table is an extension of RFC 2662. It contains ADSL line configuration and monitoring information. This includes the ADSL line's capabilities and actual A… |
| 1.3.6.1.4.1.2011.6.31.1.17.1 | RowhwadslLineExtInfoEntry | not-accessible | current | This table is an extension of RFC 2662. It contains ADSL line configuration and monitoring information. This includes the ADSL line's capabilities and actual A… |
| 1.3.6.1.4.1.2011.6.31.1.17.1.1 | Columnhwadsl2LineTransAtucActualInfo | read-only | current | The actual transmission mode of the ATU-C. During ADSL line initialization, the ADSL Transceiver Unit - Remote terminal end (ATU-R) will determine the mode use… |
| 1.3.6.1.4.1.2011.6.31.1.17.1.2 | ColumnhwadslLineStatusRtxUsedDs | read-only | current | This parameter specifies whether G.998.4 retransmission is used (i.e., active in Showtime) in a given transmit direction. The parameter in downstream is RTX_US… |
| 1.3.6.1.4.1.2011.6.31.1.17.1.3 | ColumnhwadslLineStatusInitResult | read-only | current | Indicates the result of the last full initialization performed on the line. Options: 1. noFail(0) - Successful initialization 2. configError(1) - Configuration… |
| 1.3.6.1.4.1.2011.6.31.1.17.1.4 | ColumnhwadslLineStatusSigAttenDs | read-only | current | The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during Showtime. It ranges… |
| 1.3.6.1.4.1.2011.6.31.1.17.1.5 | ColumnhwadslLineStatusSigAttenUs | read-only | current | The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during Showtime. It ranges… |
| 1.3.6.1.4.1.2011.6.31.1.17.1.6 | ColumnhwadslLineStatusActPsdDs | read-only | current | Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units o… |
| 1.3.6.1.4.1.2011.6.31.1.17.1.7 | ColumnhwadslLineStatusActPsdUs | read-only | current | Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 … |
| 1.3.6.1.4.1.2011.6.31.1.17.1.8 | ColumnhwadslLineStatusLastRetrainInfo | read-only | current | Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpe-l3-trigger(2) - The terminal initiates a lo… |
| 1.3.6.1.4.1.2011.6.31.1.17.1.9 | ColumnhwadslLineStatusLineRateDs | read-only | current | The actual line rate downstream. Unit: bits/second |
| 1.3.6.1.4.1.2011.6.31.1.17.1.10 | ColumnhwadslLineStatusLineRateUs | read-only | current | The actual line rate upstream. Unit: bits/second |
| 1.3.6.1.4.1.2011.6.31.1.18 | TablehwadslAtucChanPerfDataInfoTable | not-accessible | current | Parameter table of the ATUC channel performance: This table is used to query the performance statistics of the ATUC channel. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.18.1 | RowhwadslAtucChanPerfDataInfoEntry | not-accessible | current | Parameter table of the ATUC channel performance: This table is used to query the performance statistics of the ATUC channel. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.1 | ColumnhwadslAtucChanFecBlksInfo | read-only | current | The count of all blocks received with FEC anomalies since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.2 | ColumnhwadslAtucChanHecBlksInfo | read-only | current | The count of all blocks received with HEC anomalies since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.3 | ColumnhwadslAtucChanCrcBlksInfo | read-only | current | The count of all blocks received with CRC anomalies since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.4 | ColumnhwadslAtucChanPerfCurr15MinFecBlksInfo | read-only | current | The count of all blocks received with FEC anomalies on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.5 | ColumnhwadslAtucChanPerfCurr15MinHecBlksInfo | read-only | current | The count of all blocks received with HEC anomalies on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.6 | ColumnhwadslAtucChanPerfCurr15MinCrcBlksInfo | read-only | current | The count of all blocks received with CRC anomalies on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.7 | ColumnhwadslAtucChanPerfCurr1DayFecBlksInfo | read-only | current | The count of all blocks received with FEC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.8 | ColumnhwadslAtucChanPerfCurr1DayHecBlksInfo | read-only | current | The count of all blocks received with HEC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.9 | ColumnhwadslAtucChanPerfCurr1DayCrcBlksInfo | read-only | current | The count of all blocks received with CRC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.10 | ColumnhwadslAtucChanPerfPrev1DayFecBlksInfo | read-only | current | The count of all blocks received with FEC anomalies on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.11 | ColumnhwadslAtucChanPerfPrev1DayHecBlksInfo | read-only | current | The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.12 | ColumnhwadslAtucChanPerfPrev1DayCrcBlksInfo | read-only | current | The count of all blocks received with CRC anomalies on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.13 | ColumnhwadslAtucChanRtxCWInfo | read-only | current | The count of units request retransmission since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.14 | ColumnhwadslAtucChanRtxCorrectedCWInfo | read-only | current | The count of units corrected by retransmission since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.15 | ColumnhwadslAtucChanRtxUncorrectedCWInfo | read-only | current | The count of units uncorrected by retransmission since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.16 | ColumnhwadslAtucChanPerfCurr15MinRtxCWInfo | read-only | current | The count of units request retransmission on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.17 | ColumnhwadslAtucChanPerfCurr15MinRtxCorrectedCWInfo | read-only | current | The count of units corrected by retransmission on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.18 | ColumnhwadslAtucChanPerfCurr15MinRtxUncorrectedCWInfo | read-only | current | The count of units uncorrected by retransmission on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.19 | ColumnhwadslAtucChanPerfCurr1DayRtxCWInfo | read-only | current | The count of units request retransmission on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.20 | ColumnhwadslAtucChanPerfCurr1DayRtxCorrectedCWInfo | read-only | current | The count of units corrected by retransmission on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.21 | ColumnhwadslAtucChanPerfCurr1DayRtxUncorrectedCWInfo | read-only | current | The count of units uncorrected by retransmission on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.22 | ColumnhwadslAtucChanPerfPrev1DayRtxCWInfo | read-only | current | The count of units request retransmission on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.23 | ColumnhwadslAtucChanPerfPrev1DayRtxCorrectedCWInfo | read-only | current | The count of units corrected by retransmission on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.24 | ColumnhwadslAtucChanPerfPrev1DayRtxUncorrectedCWInfo | read-only | current | The count of units uncorrected by retransmission on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.25 | ColumnhwadslAtucChanCurr15MStartTime | read-only | current | Start time of the current 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.18.1.26 | ColumnhwadslAtucChanCurr1DayStartTime | read-only | current | Start time of the current 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.19 | TablehwadslAturChanPerfDataInfoTable | not-accessible | current | Parameter table of the ATUR channel performance: This table is used to query the performance statistics of the ATUR channel. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.19.1 | RowhwadslAturChanPerfDataInfoEntry | not-accessible | current | Parameter table of the ATUR channel performance: This table is used to query the performance statistics of the ATUR channel. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.1 | ColumnhwadslAturChanFecBlksInfo | read-only | current | The count of all blocks received with FEC anomalies since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.2 | ColumnhwadslAturChanHecBlksInfo | read-only | current | The count of all blocks received with HEC anomalies since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.3 | ColumnhwadslAturChanCrcBlksInfo | read-only | current | The count of all blocks received with CRC anomalies since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.4 | ColumnhwadslAturChanPerfCurr15MinFecBlksInfo | read-only | current | The count of all blocks received with FEC anomalies on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.5 | ColumnhwadslAturChanPerfCurr15MinHecBlksInfo | read-only | current | The count of all blocks received with HEC anomalies on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.6 | ColumnhwadslAturChanPerfCurr15MinCrcBlksInfo | read-only | current | The count of all blocks received with CRC anomalies on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.7 | ColumnhwadslAturChanPerfCurr1DayFecBlksInfo | read-only | current | The count of all blocks received with FEC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.8 | ColumnhwadslAturChanPerfCurr1DayHecBlksInfo | read-only | current | The count of all blocks received with HEC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.9 | ColumnhwadslAturChanPerfCurr1DayCrcBlksInfo | read-only | current | The count of all blocks received with CRC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.10 | ColumnhwadslAturChanPerfPrev1DayFecBlksInfo | read-only | current | The count of all blocks received with FEC anomalies on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.11 | ColumnhwadslAturChanPerfPrev1DayHecBlksInfo | read-only | current | The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.12 | ColumnhwadslAturChanPerfPrev1DayCrcBlksInfo | read-only | current | The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.13 | ColumnhwadslAturChanRtxCWInfo | read-only | current | The count of units request retransmission since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.14 | ColumnhwadslAturChanRtxCorrectedCWInfo | read-only | current | The count of units corrected by retransmission since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.15 | ColumnhwadslAturChanRtxUncorrectedCWInfo | read-only | current | The count of units uncorrected by retransmission since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.16 | ColumnhwadslAturChanPerfCurr15MinRtxCWInfo | read-only | current | The count of units request retransmission on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.17 | ColumnhwadslAturChanPerfCurr15MinRtxCorrectedCWInfo | read-only | current | The count of units corrected by retransmission on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.18 | ColumnhwadslAturChanPerfCurr15MinRtxUncorrectedCWInfo | read-only | current | The count of units uncorrected by retransmission on this channel within the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.19 | ColumnhwadslAturChanPerfCurr1DayRtxCWInfo | read-only | current | The count of units request retransmission on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.20 | ColumnhwadslAturChanPerfCurr1DayRtxCorrectedCWInfo | read-only | current | The count of units corrected by retransmission on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.21 | ColumnhwadslAturChanPerfCurr1DayRtxUncorrectedCWInfo | read-only | current | The count of units uncorrected by retransmission on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.22 | ColumnhwadslAturChanPerfPrev1DayRtxCWInfo | read-only | current | The count of units request retransmission on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.23 | ColumnhwadslAturChanPerfPrev1DayRtxCorrectedCWInfo | read-only | current | The count of units corrected by retransmission on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.24 | ColumnhwadslAturChanPerfPrev1DayRtxUncorrectedCWInfo | read-only | current | The count of units uncorrected by retransmission on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.25 | ColumnhwadslAturChanCurr15MStartTime | read-only | current | Start time of the current 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.19.1.26 | ColumnhwadslAturChanCurr1DayStartTime | read-only | current | Start time of the current 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.20 | TablehwadslAturChanIntervalInfoTable | not-accessible | current | Period table of collecting the ATUR channel performance data. This table is used to query the ATUR channel performance data collected in each period (a day is … |
| 1.3.6.1.4.1.2011.6.31.1.20.1 | RowhwadslAturChanIntervalInfoEntry | not-accessible | current | Period table of collecting the ATUR channel performance data. This table is used to query the ATUR channel performance data collected in each period (a day is … |
| 1.3.6.1.4.1.2011.6.31.1.20.1.1 | ColumnhwadslAturChanIntervalFecBlksInfo | read-only | current | The count of all blocks received with FRC anomalies on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.20.1.2 | ColumnhwadslAturChanIntervalHecBlksInfo | read-only | current | The count of all blocks received with HRC anomalies on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.20.1.3 | ColumnhwadslAturChanIntervalCrcBlksInfo | read-only | current | The count of all blocks received with CRC anomalies on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.20.1.4 | ColumnhwadslAturChanIntervalRtxCWInfo | read-only | current | The count of units request retransmission on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.20.1.5 | ColumnhwadslAturChanIntervalRtxCorrectedCWInfo | read-only | current | The count of units corrected by retransmission on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.20.1.6 | ColumnhwadslAturChanIntervalRtxUncorrectedCWInfo | read-only | current | The count of units uncorrected by retransmission on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.20.1.7 | ColumnhwAdslAturChanIntervalStartTime | read-only | current | Start time of the historical 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.21 | TablehwadslLineAlarmConfProfileCfgTable | not-accessible | current | This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure … |
| 1.3.6.1.4.1.2011.6.31.1.21.1 | RowhwadslLineAlarmConfProfileCfgEntry | not-accessible | current | This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure … |
| 1.3.6.1.4.1.2011.6.31.1.21.1.1 | ColumnhwadslLineAlarmConfProfileDyingGaspCfg | read-create | current | This object enables/disables the report of LOSS-OF-POWER alarm in an ADSL line. This object is defaulted enable(1). Options: 1. enable(1) - The report of LOSS-… |
| 1.3.6.1.4.1.2011.6.31.1.21.1.2 | ColumnhwadslLineAlarmConfProfXturThresh15MinLeftrs | read-create | current | A threshold for the hwAdslAturPerfCurr15MLeftrs counter, The value 0 means that no threshold is specified for the associated counter. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.21.1.3 | ColumnhwAdslLineAlarmConfProfileActiveFailAlarmSwitch | read-create | current | This object enable/disable the active fail alarm switch. Options: 1. enable(1) - The active fail alarm switch is enabled 2. disable(2) - The active fail alarm … |
| 1.3.6.1.4.1.2011.6.31.1.22 | TablehwAdslPortPerformanceStatInfoTable | not-accessible | current | This table is used to describe the performance statistics of the ADSL port within 15 minutes. The indexes of this table are ifIndex and hwAdslPort15minutesPerf… |
| 1.3.6.1.4.1.2011.6.31.1.22.1 | RowhwAdslPortPerformanceStatInfoEntry | not-accessible | current | This table is used to describe the performance statistics of the ADSL port within 15 minutes. The indexes of this entry are ifIndex and hwAdslPort15minutesPerf… |
| 1.3.6.1.4.1.2011.6.31.1.22.1.1 | ColumnhwAdslPort15minutesPerformanceIntervalIndex | not-accessible | current | The index of the interval which is queried. Range: 0-96 |
| 1.3.6.1.4.1.2011.6.31.1.22.1.2 | ColumnhwAdslPort15minutesPerformanceInBytesInfo | read-only | current | Read the received bytes of xDSL port during 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.3 | ColumnhwAdslPort15minutesPerformanceOutBytesInfo | read-only | current | Read the transmitted bytes of xDSL port during 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.4 | ColumnhwAdslPortSyncSuccNumberInfo | read-only | current | Number of successful activations within 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.5 | ColumnhwAdslPortSyncFailNumberInfo | read-only | current | Number of failed activations within 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.6 | ColumnhwAdslPortAtucCodeViolationInfo | read-only | current | Seconds of head errors of the ATUC cell within 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.7 | ColumnhwAdslPortAturCodeViolationInfo | read-only | current | Seconds of the head errors of the ATUC cell within 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.8 | ColumnhwAdslPortAtucFecSecondsInfo | read-only | current | Seconds of the ATUC FEC errors within 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.9 | ColumnhwAdslPortAturFecSecondsInfo | read-only | current | Seconds of the ATUR FEC errors within 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.10 | ColumnhwAdslPortCurrent15minutesTimeElapseInfo | read-only | current | Seconds that is passed within the current 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.11 | ColumnhwAdslPortAtucHecDropCellsCntInfo | read-only | current | ATUC cells discarded with HEC Errors. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.12 | ColumnhwAdslPortAturHecDropCellsCntInfo | read-only | current | ATUR cells discarded with HEC Errors. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.13 | ColumnhwAdslLineConfProfileInfo | read-only | current | The value of this object identifies the row in the ADSL Line Configuration Profile Table, (adslLineConfProfileTable), which applies for this ADSL line, and cha… |
| 1.3.6.1.4.1.2011.6.31.1.22.1.14 | ColumnhwAdslPort15minUpTimeInfo | read-only | current | The up time in the interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.15 | ColumnhwAdslAtucCurrAtnInfo | read-only | current | Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. Range: 0-630 Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.22.1.16 | ColumnhwAdslAtucCurrSnrMgnInfo | read-only | current | Noise Margin as seen by this ATU with respect to its received signal. Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.22.1.17 | ColumnhwAdslAtucCurrAttainableRateInfo | read-only | current | Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.22.1.18 | ColumnhwAdslAtucChanCurrTxRateInfo | read-only | current | The actual transmitted rate on this channel. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.22.1.19 | ColumnhwAdslAturCurrAtnInfo | read-only | current | Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. Range: 0-630 Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.22.1.20 | ColumnhwAdslAturCurrSnrMgnInfo | read-only | current | Noise Margin as seen by this ATU with respect to its received signal. Range: (-640)-(640) Unit: tenth dB |
| 1.3.6.1.4.1.2011.6.31.1.22.1.21 | ColumnhwAdslAturCurrAttainableRateInfo | read-only | current | Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.22.1.22 | ColumnhwAdslAturChanCurrTxRateInfo | read-only | current | The actual transmitted rate on this channel. Unit: bps |
| 1.3.6.1.4.1.2011.6.31.1.22.1.23 | ColumnhwAdslAtucIntervalESsInfo | read-only | current | Seconds of the ATU-C errors at the interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.24 | ColumnhwAdslAtucIntervalLofsInfo | read-only | current | The count of seconds in the interval when there was Loss of Framing. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.25 | ColumnhwAdslAtucIntervalLolsInfo | read-only | current | The count of seconds in the interval when there was Loss of Link. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.26 | ColumnhwAdslAtucIntervalLossInfo | read-only | current | The count of seconds in the interval when there was Loss of Signal. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.27 | ColumnhwAdslAtucIntervalLprsInfo | read-only | current | The count of seconds in the interval when there was Loss of Power. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.28 | ColumnhwAdslAturIntervalESsInfo | read-only | current | Seconds of the ATU-R errors at the interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.29 | ColumnhwAdslAturIntervalLofsInfo | read-only | current | The count of seconds in the interval when there was Loss of Framing. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.30 | ColumnhwAdslAturIntervalLossInfo | read-only | current | The count of seconds in the interval when there was Loss of Signal. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.31 | ColumnhwAdslAturIntervalLprsInfo | read-only | current | The count of seconds in the interval when there was Loss of Power. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.32 | ColumnhwAdslAtucChanIntervalReceivedBlksInfo | read-only | current | The count of all encoded blocks received on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.33 | ColumnhwAdslAtucChanIntervalTransmittedBlksInfo | read-only | current | The count of all encoded blocks transmitted on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.34 | ColumnhwAdslAtucChanIntervalCorrectedBlksInfo | read-only | current | The count of all blocks received with errors that were corrected on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.35 | ColumnhwAdslAtucChanIntervalUncorrectBlksInfo | read-only | current | The count of all blocks received with uncorrectable errors on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.36 | ColumnhwAdslAturChanIntervalReceivedBlksInfo | read-only | current | The count of all encoded blocks received on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.37 | ColumnhwAdslAturChanIntervalTransmittedBlksInfo | read-only | current | The count of all encoded blocks transmitted on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.38 | ColumnhwAdslAturChanIntervalCorrectedBlksInfo | read-only | current | The count of all blocks received with errors that were corrected on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.39 | ColumnhwAdslAturChanIntervalUncorrectBlksInfo | read-only | current | The count of all blocks received with uncorrectable errors on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.22.1.40 | ColumnhwAdslAtucIntervalSesLInfo | read-only | current | For the each interval, adslAtucIntervalSesL reports the number of seconds during which there have been severely errored seconds-line. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.41 | ColumnhwAdslAtucIntervalUasLInfo | read-only | current | For the each interval, adslAtucIntervalUasL reports the number of seconds during which there have been unavailable seconds-line. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.42 | ColumnhwAdslAturIntervalSesLInfo | read-only | current | For the each interval, adslAturIntervalSesL reports the number of seconds during which there have been severely errored seconds-line. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.43 | ColumnhwAdslAturIntervalUasLInfo | read-only | current | For the each interval, adslAturIntervalUasL reports the number of seconds during which there have been unavailable seconds-line. Unit: seconds |
| 1.3.6.1.4.1.2011.6.31.1.22.1.44 | ColumnhwAdslPortCurrentActModeInfo | read-only | current | Instantaneous value of the technology type that line is currently trained up under. Options: 1. adsl(1) - Indicates that line is currently trained up under ads… |
| 1.3.6.1.4.1.2011.6.31.1.23 | TablehwadslPortRateChangeTrapParaInfoTable | not-accessible | current | ADSL line rate change trap parameter table. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.23.1 | RowhwadslPortRateChangeTrapParaInfoEntry | not-accessible | current | ADSL line rate change trap parameter table. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.23.1.1 | ColumnhwAdslPortRateChangeTrapIPIAIDInfo | accessible-for-notify | current | The port IPIAID is reported when the port rate changes. |
| 1.3.6.1.4.1.2011.6.31.1.23.1.2 | ColumnhwAdslPortRateChangeTrapMUXIDInfo | accessible-for-notify | current | The port MUXID is reported when the port rate changes. Range: 0-20 |
| 1.3.6.1.4.1.2011.6.31.1.23.1.3 | ColumnhwAdslPortRateChangeTrapTimeStampInfo | accessible-for-notify | current | The time stamp of Line rate change trap. Standard Unix format; as the number of seconds since 1/1/1970. Unit:Seconds. |
| 1.3.6.1.4.1.2011.6.31.1.23.1.4 | ColumnhwAdslPortRateChangeTrapDSLineRateInfo | accessible-for-notify | current | Down stream line rate after line rate change. |
| 1.3.6.1.4.1.2011.6.31.1.23.1.5 | ColumnhwAdslPortRateChangeTrapUSLineRateInfo | accessible-for-notify | current | Up stream line rate after line rate change. |
| 1.3.6.1.4.1.2011.6.31.1.23.1.6 | ColumnhwAdslPortRateChangeTrapEventTypeInfo | accessible-for-notify | current | Event type reported during the previous change of the rate If both the upstream and downstream rates change, this leaf outputs character string 'DU'. If only t… |
| 1.3.6.1.4.1.2011.6.31.1.23.1.7 | ColumnhwAdslPortRateChangeTrapDslTypeInfo | accessible-for-notify | current | DSL line type of the port whose rate changes. |
| 1.3.6.1.4.1.2011.6.31.1.24 | NodehwadslSysManagementParaCfgTable | |||
| 1.3.6.1.4.1.2011.6.31.1.24.1 | ScalarhwadslPortRateChangeTrapCfgConfig | read-write | current | Enables or disables ADSL port line-rate change trap feature. Options: 1. enabled(1) - ADSL port line-rate change trap feature is enabled 2. disabled(2) - ADSL … |
| 1.3.6.1.4.1.2011.6.31.1.24.2 | Scalarhwadsl2MaximumInterleavedDepth | read-write | current | Set the ADSL2 maximum interleaved depth function. Default values:maxInterleavedDepth511(2). Options: 1. maxInterleavedDepth64(1) - it means the interleaving de… |
| 1.3.6.1.4.1.2011.6.31.1.25 | TablehwadslAtucPerfDataInfoTable | not-accessible | current | Table of querying the performance statistics of the ATUC port. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of thi… |
| 1.3.6.1.4.1.2011.6.31.1.25.1 | RowhwadslAtucPerfDataInfoEntry | not-accessible | current | Table of querying the performance statistics of the ATUC port. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of thi… |
| 1.3.6.1.4.1.2011.6.31.1.25.1.1 | ColumnhwAdslAtucPerfFailFullInitsInfo | read-only | current | The count of the line initialization failed attempts since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.2 | ColumnhwAdslAtucPerfCurr15MinFailFullInitsInfo | read-only | current | The count of the line initialization failed attempts in the current 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.3 | ColumnhwAdslAtucPerfCurr1DayFailFullInitsInfo | read-only | current | The count of the line initialization failed attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.4 | ColumnhwAdslAtucPerfPrev1DayFailFullInitsInfo | read-only | current | The count of the line initialization failed attempts in the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.5 | ColumnhwAdslAtucPerfFullInitsInfo | read-only | current | Count of the line initialization full attempts since agent reset. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.6 | ColumnhwAdslAtucPerfCurr15MinFullInitsInfo | read-only | current | Count of the line initialization full attempts in the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.7 | ColumnhwAdslAtucPerfCurr1DayFullInitsInfo | read-only | current | Count of the line initialization full attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.8 | ColumnhwAdslAtucPerfPrev1DayFullInitsInfo | read-only | current | Count of the line initialization full attempts in the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.9 | ColumnhwAdslAtucPerfCurr15MLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the curren… |
| 1.3.6.1.4.1.2011.6.31.1.25.1.10 | ColumnhwAdslAtucPerfCurr15MEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the current 15 minutes accumu… |
| 1.3.6.1.4.1.2011.6.31.1.25.1.11 | ColumnhwAdslAtucPerfCurr15MMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the c… |
| 1.3.6.1.4.1.2011.6.31.1.25.1.12 | ColumnhwAdslAtucPerfCurr1DayLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the curren… |
| 1.3.6.1.4.1.2011.6.31.1.25.1.13 | ColumnhwAdslAtucPerfCurr1DayEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits current observed over the current 24 hours … |
| 1.3.6.1.4.1.2011.6.31.1.25.1.14 | ColumnhwAdslAtucPerfCurr1DayMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the c… |
| 1.3.6.1.4.1.2011.6.31.1.25.1.15 | ColumnhwAdslAtucPerfPrev1DayLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present over the previous 24 hou… |
| 1.3.6.1.4.1.2011.6.31.1.25.1.16 | ColumnhwAdslAtucPerfPrev1DayEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 24 hours accumul… |
| 1.3.6.1.4.1.2011.6.31.1.25.1.17 | ColumnhwAdslAtucPerfPrev1DayMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the p… |
| 1.3.6.1.4.1.2011.6.31.1.25.1.18 | ColumnhwAdslAtucPerfCurrEverBeforeLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed ever before. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.19 | ColumnhwAdslAtucPerfCurrEverBeforeEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before. The near-end counter … |
| 1.3.6.1.4.1.2011.6.31.1.25.1.20 | ColumnhwAdslAtucPerfCurrEverBeforeMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed ever befor… |
| 1.3.6.1.4.1.2011.6.31.1.25.1.21 | ColumnhwAdslAtucPerfCurr15MStartTime | read-only | current | Start time of the current 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.22 | ColumnhwAdslAtucPerfCurr1DayStartTime | read-only | current | Start time of the current 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.23 | ColumnhwAdslAtucPerfCurr15MInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes. Each INMAINPEQ needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.24 | ColumnhwAdslAtucPerfCurr15MInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.25 | ColumnhwAdslAtucPerfCurr15MInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes. Each INMAIAT needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.26 | ColumnhwAdslAtucPerfCurr1DayInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day. Each INMAINPEQ needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.27 | ColumnhwAdslAtucPerfCurr1DayInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.28 | ColumnhwAdslAtucPerfCurr1DayInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day. Each INMAIAT needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.29 | ColumnhwAdslAtucPerfPre1DayInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during the most recent previous 1-day period. Each INMAINPEQ needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.30 | ColumnhwAdslAtucPerfPre1DayInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.31 | ColumnhwAdslAtucPerfPre1DayInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during the most recent previous 1-day period. Each INMAIAT needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.32 | ColumnhwAdslAtucPerfCurrEverBeforeInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line ever before. Each INMAINPEQ needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.33 | ColumnhwAdslAtucPerfCurrEverBeforeInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.31.1.25.1.34 | ColumnhwAdslAtucPerfCurrEverBeforeInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line ever before. Each INMAIAT needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.26 | TablehwadslAtucIntervalInfoTable | not-accessible | current | This table provides one row for each ATUC performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).… |
| 1.3.6.1.4.1.2011.6.31.1.26.1 | RowhwadslAtucIntervalInfoEntry | not-accessible | current | This table provides one row for each ATUC performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).… |
| 1.3.6.1.4.1.2011.6.31.1.26.1.1 | ColumnhwAdslAtucIntervalFailFullInitsInfo | read-only | current | The count of the line initialization failed attempts during the interval. |
| 1.3.6.1.4.1.2011.6.31.1.26.1.2 | ColumnhwAdslAtucIntervalFullInitsInfo | read-only | current | Count of the line initialization full attempts during the interval. |
| 1.3.6.1.4.1.2011.6.31.1.26.1.3 | ColumnhwAdslAtucIntervalLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the previo… |
| 1.3.6.1.4.1.2011.6.31.1.26.1.4 | ColumnhwAdslAtucIntervalEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 15 minutes accum… |
| 1.3.6.1.4.1.2011.6.31.1.26.1.5 | ColumnhwAdslAtucIntervalMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the p… |
| 1.3.6.1.4.1.2011.6.31.1.26.1.6 | ColumnhwAdslAtucIntervalStartTime | read-only | current | Start time of the historical 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.26.1.7 | ColumnhwAdslAtucIntervalInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line at 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.26.1.8 | ColumnhwAdslAtucIntervalInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line at 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.26.1.9 | ColumnhwAdslAtucIntervalInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line at 15 minutes interval. Each INMAIAT needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.28 | TablehwadslAtucChanIntervalInfoTable | not-accessible | current | Period table of collecting the ATUC channel performance data This table is used to query the ATUC channel performance data collected in each period (a day is d… |
| 1.3.6.1.4.1.2011.6.31.1.28.1 | RowhwadslAtucChanIntervalInfoEntry | not-accessible | current | Period table of collecting the ATUC channel performance data This table is used to query the ATUC channel performance data collected in each period (a day is d… |
| 1.3.6.1.4.1.2011.6.31.1.28.1.1 | ColumnhwadslAtucChanIntervalFecBlksInfo | read-only | current | The count of all blocks received with FRC anomalies on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.28.1.2 | ColumnhwadslAtucChanIntervalHecBlksInfo | read-only | current | The count of all blocks received with HRC anomalies on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.28.1.3 | ColumnhwadslAtucChanIntervalCrcBlksInfo | read-only | current | The count of all blocks received with CRC anomalies on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.28.1.4 | ColumnhwadslAtucChanIntervalRtxCWInfo | read-only | current | The count of units request retransmission on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.28.1.5 | ColumnhwadslAtucChanIntervalRtxCorrectedCWInfo | read-only | current | The count of units corrected by retransmission on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.28.1.6 | ColumnhwadslAtucChanIntervalRtxUncorrectedCWInfo | read-only | current | The count of units uncorrected by retransmission on this channel during this interval. |
| 1.3.6.1.4.1.2011.6.31.1.28.1.7 | ColumnhwAdslAtucChanIntervalStartTime | read-only | current | Start time of the historical 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.29 | TablehwAdsl2SCStatusInfoTable | not-accessible | current | The table hwAdsl2SCStatusInfoTable contains status parameters of the ADSL2 sub-carriers. The indexes of this table are ifIndex and hwAdsl2SCStatusDirectionInfo. |
| 1.3.6.1.4.1.2011.6.31.1.29.1 | RowhwAdsl2SCStatusInfoEntry | not-accessible | current | The table hwAdsl2SCStatusInfoTable contains status parameters of the ADSL2 sub-carriers. The indexes of this entry are ifIndex and hwAdsl2SCStatusDirectionInfo. |
| 1.3.6.1.4.1.2011.6.31.1.29.1.1 | ColumnhwAdsl2SCStatusDirectionInfo | not-accessible | current | The direction of the sub-carrier is either upstream or downstream. Options: 1. upstream(1) - The direction of the sub-carrier is upstream 2. downstream(2) - Th… |
| 1.3.6.1.4.1.2011.6.31.1.29.1.2 | ColumnhwAdsl2SCStatusSnrInfo | read-only | current | The SNR Margin per sub-carrier, expressing the ratio between the received signal power and received noise power per subscriber. It is an array of 512 octets, d… |
| 1.3.6.1.4.1.2011.6.31.1.29.1.3 | ColumnhwAdsl2SCStatusBitsAllocInfo | read-only | current | The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. The number of utilized … |
| 1.3.6.1.4.1.2011.6.31.1.29.1.4 | ColumnhwAdsl2SCStatusGainAllocInfo | read-only | current | The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. The number of utilized octet… |
| 1.3.6.1.4.1.2011.6.31.1.29.1.5 | ColumnhwAdsl2SCStatusLogInfo | read-only | current | An array of up to 512 real H(f) logarithmic representation values in dB for the respective transmission direction. It is designed to support up to 512 (downstr… |
| 1.3.6.1.4.1.2011.6.31.1.29.1.6 | ColumnhwAdsl2SCStatusQlnInfo | read-only | current | An array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers.… |
| 1.3.6.1.4.1.2011.6.31.1.29.1.7 | ColumnhwAdsl2SCStatusSnrMarginInfo | read-only | current | SNR Margin is the maximum increase in dB of the noise power received at the ATU (ATU-R on downstream direction and ATU-C on upstream direction), such that the … |
| 1.3.6.1.4.1.2011.6.31.1.29.1.8 | ColumnhwAdsl2SCStatusTxPSDInfo | read-only | current | The PSD MASK per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub-carriers. It ranges from -1400 to -300 units o… |
| 1.3.6.1.4.1.2011.6.31.1.30 | TablehwxdslDynamicProfCfgTable | not-accessible | current | This table includes common parameters of the xDSL Dynamic profile. The index of this table is hwxdslDynamicProfProfileNameCfg. |
| 1.3.6.1.4.1.2011.6.31.1.30.1 | RowhwxdslDynamicProfCfgEntry | not-accessible | current | This table includes common parameters of the xDSL Dynamic profile. The index of this entry is hwxdslDynamicProfProfileNameCfg. |
| 1.3.6.1.4.1.2011.6.31.1.30.1.1 | ColumnhwxdslDynamicProfProfileNameCfg | not-accessible | current | The name of xDSL Dynamic Profile. |
| 1.3.6.1.4.1.2011.6.31.1.30.1.2 | ColumnhwxdslDynamicProfXtuTransSysEnaCfg | read-create | current | XTU Transmission System Enabling (ATSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more b… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.3 | ColumnhwxdslDynamicProfBitSwapDSCfg | read-create | current | Enables or disables the bit swap downstream of a line. Options: 1. disable(1) - The bit swap downstream of a line is disabled 2. enable(2) - The bit swap downs… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.4 | ColumnhwxdslDynamicProfBitSwapUSCfg | read-create | current | Enables or disables the bit swap upstream of a line. Options: 1. disable(1) - The bit swap upstream of a line is disabled 2. enable(2) - The bit swap upstream … |
| 1.3.6.1.4.1.2011.6.31.1.30.1.5 | ColumnhwxdslDynamicProfTargetSnrmDsCfg | read-create | current | The target Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete … |
| 1.3.6.1.4.1.2011.6.31.1.30.1.6 | ColumnhwxdslDynamicProfTargetSnrmUsCfg | read-create | current | The target Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete … |
| 1.3.6.1.4.1.2011.6.31.1.30.1.7 | ColumnhwxdslDynamicProfMaxSnrmDsCfg | read-create | current | The maximum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.8 | ColumnhwxdslDynamicProfMaxSnrmUsCfg | read-create | current | The maximum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.9 | ColumnhwxdslDynamicProfMinSnrmDsCfg | read-create | current | The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.10 | ColumnhwxdslDynamicProfMinSnrmUsCfg | read-create | current | The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.11 | ColumnhwxdslDynamicProfCh1MinProtectionDsCfg | read-create | current | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can … |
| 1.3.6.1.4.1.2011.6.31.1.30.1.12 | ColumnhwxdslDynamicProfCh1MinProtectionUsCfg | read-create | current | Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can ta… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.13 | ColumnhwxdslDynamicProfCh1MaxDelayDsCfg | read-create | current | Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choos… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.14 | ColumnhwxdslDynamicProfCh1MaxDelayUsCfg | read-create | current | Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose th… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.15 | ColumnhwxdslDynamicProfCh2MinProtectionDsCfg | read-create | current | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can … |
| 1.3.6.1.4.1.2011.6.31.1.30.1.16 | ColumnhwxdslDynamicProfCh2MinProtectionUsCfg | read-create | current | Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can ta… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.17 | ColumnhwxdslDynamicProfCh2MaxDelayDsCfg | read-create | current | Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choos… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.18 | ColumnhwxdslDynamicProfCh2MaxDelayUsCfg | read-create | current | Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose th… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.19 | ColumnhwxdslDynamicProfPmModeCfg | read-create | current | Power management state Enabling. Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. The various bit positions are: allowT… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.20 | ColumnhwxdslDynamicProfL0TimeCfg | read-create | current | This minimum time (in seconds) between an exit from the L2 state and the next Entry into the L2 state. It ranges from 0 to 255 seconds. Range: 0-255 |
| 1.3.6.1.4.1.2011.6.31.1.30.1.21 | ColumnhwxdslDynamicProfL2TimeCfg | read-create | current | This minimum time (in seconds) between an entry into the L2 state and the first power trim in the L2 state and between two consecutive power trims in the L2 St… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.22 | ColumnhwxdslDynamicProfL2AtprCfg | read-create | current | The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single power trim in the L2 state. It… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.23 | ColumnhwxdslDynamicProfL2AtprtCfg | read-create | current | The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at tr… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.24 | ColumnhwxdslDynamicProfDpboEPsdCfg | read-create | current | This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds. The maximum number … |
| 1.3.6.1.4.1.2011.6.31.1.30.1.25 | ColumnhwxdslDynamicProfDpboEsELCfg | read-create | current | This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.26 | ColumnhwxdslDynamicProfDpboEscmCfg | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.27 | ColumnhwxdslDynamicProfDpboMusCfg | read-create | current | DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shal… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.28 | ColumnhwxdslDynamicProfDpboFMinCfg | read-create | current | DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multip… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.29 | ColumnhwxdslDynamicProfDpboFMaxCfg | read-create | current | DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.30 | ColumnhwxdslDynamicProfUpboPsdBandCfg | read-create | current | This parameter defines the UPBO reference PSD used to compute the upstream power back-off for each upstream band except US0. A UPBOPSD defined for each band ah… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.31 | ColumnhwxdslDynamicProfUpboKLFCfg | read-create | current | This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the f… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.32 | ColumnhwxdslDynamicProfUpboKLCfg | read-create | current | This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.33 | ColumnhwxdslDynamicProfRfiBandsCfg | read-create | current | The subset of PSD mask breakpoints that shall be used to notch an RFI band. It is a string of bands consist of begin tone index and end tone index. for example… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.34 | ColumnhwxdslDynamicProfToneBlackOutCfg | read-create | current | The subset of subcarriermask that shall be used to mask the subcarriers. It is a string of bands consist of begin tone index and end tone index. For example :0… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.35 | ColumnhwxdslDynamicProfCarMaskDSCfg | read-create | current | Sub-carriers mask. A bitmap of 512 bits that allows masking up to 512 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.36 | ColumnhwxdslDynamicProfCarMaskUSCfg | read-create | current | Sub-carriers mask. A bitmap of 64 bits that allows masking up to 64 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1',… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.37 | ColumnhwxdslDynamicProfXdslModeCfg | read-create | current | The xDSL mode is a way of categorizing the various XDSL transmission modes into groups, each group (XDSL Mode) shares the same PSD configuration. Options: 1. d… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.38 | ColumnhwxdslDynamicProfMaxNomPsdDsCfg | read-create | current | The maximum nominal transmit PSD in the downstream direction during initialization and show time. It ranges from -600 to -300 units of 0.1 dBm/Hz(physical valu… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.39 | ColumnhwxdslDynamicProfMaxNomPsdUsCfg | read-create | current | The maximum nominal transmit PSD in the upstream direction during initialization and show time. It ranges from -600 to -300 units of 0.1 dBm/Hz(physical values… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.40 | ColumnhwxdslDynamicProfMaxNomAtpDsCfg | read-create | current | The maximum nominal aggregate transmit power in the downstream direction during initialization and show time. It ranges from 0 to 255 units of 0.1 dBm (physica… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.41 | ColumnhwxdslDynamicProfMaxNomAtpUsCfg | read-create | current | The maximum nominal aggregate transmit power in the upstream direction during initialization and show time. It ranges from 0 to 255 units of 0.1 dBm (physical … |
| 1.3.6.1.4.1.2011.6.31.1.30.1.42 | ColumnhwxdslDynamicProfPsdMaskDsCfg | read-create | current | This configuration parameter defines the downstream PSD mask applicable at the U C2 reference point. This MIB PSD mask may impose PSD restrictions in addition … |
| 1.3.6.1.4.1.2011.6.31.1.30.1.43 | ColumnhwxdslDynamicProfPsdMaskUsCfg | read-create | current | This configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.44 | ColumnhwxdslDynamicProfLimitMaskCfg | read-create | current | This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. Options: 1. profile8a (1) - The G.993.2 profile is p… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.45 | ColumnhwxdslDynamicProfClassMaskCfg | read-create | current | In order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: Options: 1. annexA998-D-32(1) … |
| 1.3.6.1.4.1.2011.6.31.1.30.1.46 | ColumnhwxdslDynamicProfBandOptUsageCfg | read-create | current | Defines the VDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). Options: 1. disable(1) - Indicates Opt is unused 2. enable(2) - Indicates Opt… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.47 | ColumnhwxdslDynamicProfVirtualNoiseModeDsCfg | read-create | current | Defines the Virtual Noise of downsteam. Options: 1. disable(1) -unused 2. enable(2) -used 3. invalidValue(-1) -invalid Value Huawei defined. |
| 1.3.6.1.4.1.2011.6.31.1.30.1.48 | ColumnhwxdslDynamicProfVirtualNoiseModeUsCfg | read-create | current | Defines the Virtual Noise of upstream. Options: 1. disable(1) -unused 2. enable(2) -used 3. invalidValue(-1) -invalid Value Huawei defined. |
| 1.3.6.1.4.1.2011.6.31.1.30.1.49 | ColumnhwxdslDynamicProfVirtualNoiseDsCfg | read-create | current | The Virtual Noise of downsteam. This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.50 | ColumnhwxdslDynamicProfVirtualNoiseUsCfg | read-create | current | The Virtual Noise of upsteam. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a… |
| 1.3.6.1.4.1.2011.6.31.1.30.1.51 | ColumnhwxdslDynamicProfRowStatusCfg | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.31.1.31 | TablehwXdslPortIopCaptureInfoTable | not-accessible | current | The table hwXdslPortIopCaptureInfoTable implement xDSL port IOP information capture. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.31.1 | RowhwXdslPortIopCaptureInfoEntry | not-accessible | current | The table hwXdslPortIopCaptureInfoTable implement xDSL port IOP information capture. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.31.1.1 | ColumnhwXdslPortIopCaptureOperTypeCfg | read-write | current | Start or stop IOP information capture of xDSL port. Options: 1. start(1) - Start IOP information capture of xDSL port 2. stop(2) - Stop IOP information capture… |
| 1.3.6.1.4.1.2011.6.31.1.31.1.2 | ColumnhwXdslPortIopCaptureOperStatusInfo | read-only | current | Port IOP capture status Options: 1. noCapture(1) - Indicates that the capture is not performed 2. capturing(2) - Indicates that the capture is being performed … |
| 1.3.6.1.4.1.2011.6.31.1.32 | TablehwXdslDynamicInfoCollectInfoTable | not-accessible | deprecated | The table hwXdslDynamicInfoCollectTable implement xDSL port Dynamic information collect. The indexes of this table are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.31.1.32.1 | RowhwXdslDynamicInfoCollectInfoEntry | not-accessible | deprecated | The table hwXdslDynamicInfoCollectTable implement xDSL port Dynamic information collect. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.31.1.32.1.1 | ColumnhwXdslDynamicInfoCollectInfo | read-write | deprecated | Start Dynamic information collecting of xDSL port. Options: 1. start(1) - Indicates the collecting starts 2. invalid(-1) - Invalid value |
| 1.3.6.1.4.1.2011.6.31.1.32.1.2 | ColumnhwXdslDynamicInfoCollectStatusInfo | read-only | deprecated | Board Dynamic information collecting status. Options: 1. noCollect(1) - Indicates that collecting data is not performed 2. collecting(2) - Indicates that colle… |
| 1.3.6.1.4.1.2011.6.31.1.32.1.3 | ColumnhwXdslDynamicInfoCollectTimeInfo | read-only | deprecated | Time at which collecting the optimization information is complete. |
| 1.3.6.1.4.1.2011.6.31.1.32.1.4 | ColumnhwXdslDynamicInfoCollectPortList | read-write | deprecated | This object defines the operating port list of certain xDSL board. Each bit of this string specifies a port. If that bit has a value of '1', then that port is … |
| 1.3.6.1.4.1.2011.6.31.1.33 | TablehwadslAturPerfDataInfoTable | not-accessible | current | This table provides one row for each ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.33.1 | RowhwadslAturPerfDataInfoEntry | not-accessible | current | This table provides one row for each ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.1 | ColumnhwAdslAturPerfCurr15MStartTime | read-only | current | Start time of the current 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.2 | ColumnhwAdslAturPerfCurr1DayStartTime | read-only | current | Start time of the current 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.3 | ColumnhwAdslAturPerfCurr15MInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes. Each INMAINPEQ needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.4 | ColumnhwAdslAturPerfCurr15MInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.5 | ColumnhwAdslAturPerfCurr15MInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes. Each INMAIAT needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.6 | ColumnhwAdslAturPerfCurr1DayInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day. Each INMAINPEQ needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.7 | ColumnhwAdslAturPerfCurr1DayInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.8 | ColumnhwAdslAturPerfCurr1DayInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day. Each INMAIAT needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.9 | ColumnhwAdslAturPerfPre1DayInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during the most recent previous 1-day period. Each INMAINPEQ needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.10 | ColumnhwAdslAturPerfPre1DayInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during the most recent previous 1-day period. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.11 | ColumnhwAdslAturPerfPre1DayInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during the most recent previous 1-day period. Each INMAIAT needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.12 | ColumnhwAdslAturPerfCurrEverBeforeInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line ever before. Each INMAINPEQ needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.13 | ColumnhwAdslAturPerfCurrEverBeforeInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.14 | ColumnhwAdslAturPerfCurrEverBeforeInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line ever before. Each INMAIAT needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.15 | ColumnhwAdslAturPerfCurr15MLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed over the current… |
| 1.3.6.1.4.1.2011.6.31.1.33.1.16 | ColumnhwAdslAturPerfCurr15MEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the current 15 minutes accumu… |
| 1.3.6.1.4.1.2011.6.31.1.33.1.17 | ColumnhwAdslAturPerfCurr15MMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the c… |
| 1.3.6.1.4.1.2011.6.31.1.33.1.18 | ColumnhwAdslAturPerfCurr1DayLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed over the current… |
| 1.3.6.1.4.1.2011.6.31.1.33.1.19 | ColumnhwAdslAturPerfCurr1DayEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits current observed over the current 24 hours … |
| 1.3.6.1.4.1.2011.6.31.1.33.1.20 | ColumnhwAdslAturPerfCurr1DayMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the c… |
| 1.3.6.1.4.1.2011.6.31.1.33.1.21 | ColumnhwAdslAturPerfPrev1DayLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present over the previous 24 hour… |
| 1.3.6.1.4.1.2011.6.31.1.33.1.22 | ColumnhwAdslAturPerfPrev1DayEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 24 hours accumul… |
| 1.3.6.1.4.1.2011.6.31.1.33.1.23 | ColumnhwAdslAturPerfPrev1DayMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the p… |
| 1.3.6.1.4.1.2011.6.31.1.33.1.24 | ColumnhwAdslAturPerfCurrEverBeforeLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed ever before. |
| 1.3.6.1.4.1.2011.6.31.1.33.1.25 | ColumnhwAdslAturPerfCurrEverBeforeEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before. The far-end counter i… |
| 1.3.6.1.4.1.2011.6.31.1.33.1.26 | ColumnhwAdslAturPerfCurrEverBeforeMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed ever befor… |
| 1.3.6.1.4.1.2011.6.31.1.34 | TablehwadslAturIntervalInfoTable | not-accessible | current | This table provides one row for each Atur performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).… |
| 1.3.6.1.4.1.2011.6.31.1.34.1 | RowhwadslAturIntervalInfoEntry | not-accessible | current | This table provides one row for each Atur performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).… |
| 1.3.6.1.4.1.2011.6.31.1.34.1.1 | ColumnhwAdslAturIntervalStartTime | read-only | current | Start time of the historical 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.31.1.34.1.2 | ColumnhwAdslAturIntervalInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line at 15 minutes interval. Each INMAINPEQ needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.34.1.3 | ColumnhwAdslAturIntervalInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line at 15 minutes interval. |
| 1.3.6.1.4.1.2011.6.31.1.34.1.4 | ColumnhwAdslAturIntervalInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line at 15 minutes interval. Each INMAIAT needs 4 bytes. |
| 1.3.6.1.4.1.2011.6.31.1.34.1.5 | ColumnhwAdslAturIntervalLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a far-end leftr defect present observed over the previou… |
| 1.3.6.1.4.1.2011.6.31.1.34.1.6 | ColumnhwAdslAturIntervalEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the previous 15 minutes accum… |
| 1.3.6.1.4.1.2011.6.31.1.34.1.7 | ColumnhwAdslAturIntervalMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter MINEFTR reports the minimum of the EFTR(Error-free throughput rate) observed over the 1… |
| 1.3.6.1.4.1.2011.6.31.2 | NodehwAdslExtTraps | |||
| 1.3.6.1.4.1.2011.6.31.2.1 | NodehwAdslCommonTraps | |||
| 1.3.6.1.4.1.2011.6.31.2.1.0 | NodehwAdslCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.31.2.1.0.1 | NotificationhwAdslPortActRateMonitorInfoTrap | current | If ADSL act rate is lower than threshold, hwTrapType is 1. Otherwise, hwTrapType is 2. This trap message is generated when the ADSL port rate fails to meet the… | |
| 1.3.6.1.4.1.2011.6.31.2.1.0.2 | NotificationhwAdslPortRateChangeInfoTrap | current | ADSL act rate is change trap. This trap message is generated when the ADSL port rate changed. | |
| 1.3.6.1.4.1.2011.6.31.2.1.0.3 | NotificationhwAdslDynamicCollectInfoTrap | current | XDSL dynamic collect trap. This trap message is generated when xDSL port Dynamic information collect. | |
| 1.3.6.1.4.1.2011.6.31.2.1.0.4 | NotificationhwAdslDeltOperResultInfoTrap | current | ADSL delt trap. This trap message is generated when the ADSL port delt test finish. | |
| 1.3.6.1.4.1.2011.6.31.2.1.0.5 | NotificationhwAdslPortStatusChangeInfoTrap | current | ADSL port status change trap. This trap message is generated when the ADSL port status changed. | |
| 1.3.6.1.4.1.2011.6.31.2.1.0.6 | NotificationhwAdslSeltStartResultTrap | current | ADSL selt test start trap. This trap message is generated when the ADSL port selt test finish. | |
| 1.3.6.1.4.1.2011.6.31.2.1.0.7 | NotificationhwADSLLineProfChangeTrap | current | ADSL line profile change trap. This trap message is generated when the ADSL line profile changed. | |
| 1.3.6.1.4.1.2011.6.31.2.1.0.8 | NotificationhwADSLAlarmProfChangeTrap | current | ADSL alarm profile change trap. This trap message is generated when the ADSL alarm profile changed. | |
| 1.3.6.1.4.1.2011.6.31.2.2 | NodehwAdslAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.31.2.2.0 | NodehwAdslAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.31.2.2.0.1 | NotificationhwAdslPortActRateFailThresholdAlarmTrap | current | This trap message is generated when the ADSL port activation rate fails to reach the rate threshold. | |
| 1.3.6.1.4.1.2011.6.31.2.2.0.2 | NotificationhwAdslPortActRateReachThresholdAlarmTrap | current | This trap message is generated when the ADSL port activation rate succeeds in reaching the rate threshold. | |
| 1.3.6.1.4.1.2011.6.31.2.2.0.3 | NotificationhwAdslPortAutoDeactiveAlarmTrap | current | This trap message is generated when the ADSL port is automatically deactivated due to the line fault. | |
| 1.3.6.1.4.1.2011.6.31.2.2.0.4 | NotificationhwAdslPortReactiveAlarmTrap | current | This trap message is generated when the ADSL port is re-activated after the ADSL line recovers. | |
| 1.3.6.1.4.1.2011.6.31.2.2.0.5 | NotificationhwAdslPortStatReachThresholdAlarmTrap | current | This trap message is generated when the performance statistics of the ADSL port reach the threshold. | |
| 1.3.6.1.4.1.2011.6.31.2.2.0.6 | NotificationhwAdslPortATURPowerOffAlarmTrap | current | This trap message is generated when the ATU-R is powered off. | |
| 1.3.6.1.4.1.2011.6.31.2.2.0.7 | NotificationhwAdslPortActRateLowerThresholdAlarmTrap | current | This trap message is generated when the activation rate of the xDSL line is lower than the threshold. | |
| 1.3.6.1.4.1.2011.6.31.2.2.0.8 | NotificationhwAdslChipsetNotAvailableAlarmTrap | current | This trap message is generated when the ADSL chipset is not available. | |
| 1.3.6.1.4.1.2011.6.31.2.2.0.9 | NotificationhwAdslChipsetRecoverAlarmTrap | current | This trap message is generated when the ADSL chipset recovers. | |
| 1.3.6.1.4.1.2011.6.31.2.2.0.10 | NotificationhwAdslPortDeactiveAlarmTrap | current | Some xDSL ports or all the xDSL ports are automatically deactivated due to lack of licenses. This trap message is generated when the xDSL ports are automatical… | |
| 1.3.6.1.4.1.2011.6.31.3 | NodehwAdslTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.31.3.0 | ScalarhwadslPMThresholdItem | accessible-for-notify | current | Indicates the threshold item. |
| 1.3.6.1.4.1.2011.6.31.3.1 | ScalarhwadslChipsetID | accessible-for-notify | current | The chipset id of the board. |
| 1.3.6.1.4.1.2011.6.31.3.2 | ScalarhwAdslRequestID | accessible-for-notify | current | RequestID. |
| 1.3.6.1.4.1.2011.6.31.3.3 | ScalarhwadslSeltTestStartResult | accessible-for-notify | current | ADSL selt test start result. Options: 1. normal - A message is returned indicating that the SELT is successful. 2. failed - A message is returned indicating th… |
| 1.3.6.1.4.1.2011.6.31.3.4 | ScalarhwADSLProfOperType | accessible-for-notify | current | ADSL profile operate type. Options: 1.add(1) - Add an ADSL profile 2.modify(2) - Modify an ADSL profile 3.delete(3) - Delete an ADSL profile |
| 1.3.6.1.4.1.2011.6.31.3.5 | ScalarhwadslLinePMThresholdValue | accessible-for-notify | current | Indicate the threshold value of threshold item. |
| 1.3.6.1.4.1.2011.6.31.3.6 | ScalarhwadslLinePMCurrentValue | accessible-for-notify | current | Indicate the current value of threshold item. |