MIB Viewer

HUAWEI-VDSL2-LINE-MIB

877 objects
This mib is used for defining huawei's VDSL line management MIB objects.
Imported Objects
HC-PerfHist-TC-MIBHCPerfIntervalThreshold HCPerfTimeElapsed
HUAWEI-DEVICE-MIBhwConfigChangeIP hwFrameIndex hwPortIndex hwPortOperStatus hwPortPrimaryStatus hwPortSecondaryStatus hwSlotIndex
HUAWEI-MIBhuaweiUtility
HUAWEI-VDSL2-LINE-TC-MIBVdsl2Actmode Vdsl2AutoProfile Vdsl2BandOptUsage Vdsl2BandPlan Vdsl2BitSwap Vdsl2CfgMode Vdsl2ChAtmStatus Vdsl2ChEnabling Vdsl2ChPtmStatus Vdsl2ConfPmsForce Vdsl2DataPathMode Vdsl2DataPathModeType Vdsl2Direction Vdsl2DpboEpsd Vdsl2DpboEscm Vdsl2ForceINP Vdsl2InitResult Vdsl2LastTransmittedState Vdsl2LConfProfPmMode Vdsl2LdsfResult Vdsl2LineLdsf Vdsl2LineStatus Vdsl2MaxBer Vdsl2OperationModes Vdsl2PhyRControl Vdsl2PowerMngState Vdsl2Profiles Vdsl2ProfSwitchType Vdsl2PSDClassMask Vdsl2PsdLimitMask Vdsl2PsdMaskDs Vdsl2PsdMaskUs Vdsl2RaMode Vdsl2Rfi Vdsl2ScMaskDs Vdsl2ScMaskUs Vdsl2StatusRtxUsed Vdsl2SubProfiles Vdsl2SubProfilesWeight Vdsl2SymbolProtectionDs Vdsl2SymbolProtectionUs Vdsl2TIPsdClassMask Vdsl2TransmissionModeType Vdsl2Tssi Vdsl2Unit Vdsl2UpboBoostMode Vdsl2UpboKl0RefBand Vdsl2UpboKlf Vdsl2UpboPsdBand Vdsl2UpsPsdMaskSelection Vdsl2Us0Disable Vdsl2Us0PsdMask Vdsl2vdsltoneblackout Vdsl2VirtualNoise Vdsl2VirtualNoiseDs Vdsl2VirtualNoiseUs Xdsl2Band
HUAWEI-XDSL-COMMON-MIBhwXdslProfName
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.2011.6.115IdentityvdslMIBThis mib is used for defining huawei's VDSL line management MIB objects.
1.3.6.1.4.1.2011.6.115.1Nodevdsl2
1.3.6.1.4.1.2011.6.115.1.0Nodevdsl2Notifications
1.3.6.1.4.1.2011.6.115.1.0.1Notificationvdsl2LinePerfFECSThreshXtuccurrentThis notification indicates that the FEC seconds threshold has been reached/exceeded for the referred xTU-C.
1.3.6.1.4.1.2011.6.115.1.0.2Notificationvdsl2LinePerfFECSThreshXturcurrentThis notification indicates that the FEC seconds threshold has been reached/exceeded for the referred xTU-R.
1.3.6.1.4.1.2011.6.115.1.0.3Notificationvdsl2LinePerfESThreshXtuccurrentThis notification indicates that the errored seconds threshold has been reached/exceeded for the referred xTU-C.
1.3.6.1.4.1.2011.6.115.1.0.4Notificationvdsl2LinePerfESThreshXturcurrentThis notification indicates that the errored seconds threshold has been reached/exceeded for the referred xTU-R.
1.3.6.1.4.1.2011.6.115.1.0.5Notificationvdsl2LinePerfSESThreshXtuccurrentThis notification indicates that the severely-errored seconds threshold has been reached/exceeded for the referred xTU-C.
1.3.6.1.4.1.2011.6.115.1.0.6Notificationvdsl2LinePerfSESThreshXturcurrentThis notification indicates that the severely-errored seconds threshold has been reached/exceeded for the referred xTU-R.
1.3.6.1.4.1.2011.6.115.1.0.7Notificationvdsl2LinePerfLOSSThreshXtuccurrentThis notification indicates that the LOS seconds threshold has been reached/exceeded for the referred xTU-C.
1.3.6.1.4.1.2011.6.115.1.0.8Notificationvdsl2LinePerfLOSSThreshXturcurrentThis notification indicates that the LOS seconds threshold has been reached/exceeded for the referred xTU-R.
1.3.6.1.4.1.2011.6.115.1.0.9Notificationvdsl2LinePerfUASThreshXtuccurrentThis notification indicates that the unavailable seconds threshold has been reached/exceeded for the referred xTU-C.
1.3.6.1.4.1.2011.6.115.1.0.10Notificationvdsl2LinePerfUASThreshXturcurrentThis notification indicates that the unavailable seconds threshold has been reached/exceeded for the referred xTU-R.
1.3.6.1.4.1.2011.6.115.1.0.11Notificationvdsl2LinePerfCodingViolationsThreshXtuccurrentThis notification indicates that the coding violations threshold has been reached/exceeded for the referred xTU-C.
1.3.6.1.4.1.2011.6.115.1.0.12Notificationvdsl2LinePerfCodingViolationsThreshXturcurrentThis notification indicates that the coding violations threshold has been reached/exceeded for the referred xTU-R.
1.3.6.1.4.1.2011.6.115.1.0.13Notificationvdsl2LinePerfCorrectedThreshXtuccurrentThis notification indicates that the corrected blocks (FEC events) threshold has been reached/exceeded for the referred xTU-C.
1.3.6.1.4.1.2011.6.115.1.0.14Notificationvdsl2LinePerfCorrectedThreshXturcurrentThis notification indicates that the corrected blocks (FEC events) threshold has been reached/exceeded for the referred xTU-R.
1.3.6.1.4.1.2011.6.115.1.0.15Notificationvdsl2LinePerfFailedFullInitThreshcurrentThis notification indicates that the failed full initializations threshold has been reached/exceeded for the referred VDSL/VDSL2 or VDSL2 line.
1.3.6.1.4.1.2011.6.115.1.0.16Notificationvdsl2LinePerfFailedShortInitThreshcurrentThis notification indicates that the failed short initializations threshold has been reached/exceeded for the referred VDSL or VDSL2 line.
1.3.6.1.4.1.2011.6.115.1.0.17Notificationvdsl2LineStatusChangeXtuccurrentThis notification indicates that a status change is detected for the referred xTU-C.
1.3.6.1.4.1.2011.6.115.1.0.18Notificationvdsl2LineStatusChangeXturcurrentThis notification indicates that a status change is detected for the referred xTU-R.
1.3.6.1.4.1.2011.6.115.1.0.19Notificationvdsl2LinePerfFullInitThreshcurrentThis notification indicates that the full initializations threshold has been reached/exceeded for the referred VDSL/VDSL2 or VDSL2 line.
1.3.6.1.4.1.2011.6.115.1.1Nodevdsl2Line
1.3.6.1.4.1.2011.6.115.1.1.1Tablevdsl2LineTablenot-accessiblecurrentThe table vdsl2LineTable contains configuration, command and status parameters of the VDSL2 line. The index of this table is ifIndex.
1.3.6.1.4.1.2011.6.115.1.1.1.1Rowvdsl2LineEntrynot-accessiblecurrentThe table vdsl2LineTable contains configuration, command and status parameters of the VDSL2 line. The index of this entry is ifIndex.
1.3.6.1.4.1.2011.6.115.1.1.1.1.1Columnvdsl2LineCnfgTemplateread-writecurrentThe value of this object identifies the row in the VDSL2 Line Configuration Templates Table, (Vdsl2ConfTemplatesTable), which applies for this VDSL2 line.
1.3.6.1.4.1.2011.6.115.1.1.1.1.2Columnvdsl2LineAlarmCnfgTemplateread-writecurrentThe value of this object identifies the row in the VDSL2 Line Alarm Configuration Template Table, (vdsl2LineAlarmConfTemplateTable), which applies to this VDSL…
1.3.6.1.4.1.2011.6.115.1.1.1.1.3Columnvdsl2LineCmndConfPmsfread-writecurrentPower management state forced. Defines the line states to be forced by the near-end xTU on this line. Options: 1. l3toL0(0) - Force the line to transition from…
1.3.6.1.4.1.2011.6.115.1.1.1.1.4Columnvdsl2LineCmndConfLdsfread-writecurrentLoop diagnostics mode forced (LDSF). Defines whether the line should be forced into the loop diagnostics mode by the near-end xTU on this line or only be respo…
1.3.6.1.4.1.2011.6.115.1.1.1.1.5Columnvdsl2LineCmndConfLdsfFailReasonread-onlycurrentThe status of the recent occasion the Loop diagnostics mode forced (LDSF) was issued for the associated line. Options: 1. none(1) - The default value in case L…
1.3.6.1.4.1.2011.6.115.1.1.1.1.6Columnvdsl2LineCmndAutomodeColdStartread-writecurrentAutomode cold start forced. This parameter is defined in order to improve testing of the performance of ATUs supporting automode when it is enabled in the MIB.…
1.3.6.1.4.1.2011.6.115.1.1.1.1.7Columnvdsl2LineStatusXtuTransSysread-onlycurrentThe xTU Transmission System (XTS) in use. This parameter may be derived from the handshaking procedures defined in Recommendation G.994.1. The invalid value is…
1.3.6.1.4.1.2011.6.115.1.1.1.1.8Columnvdsl2LineStatusPwrMngStateread-onlycurrentThe current power management state. Options: 1. L0 - Synchronized and full transmission 2. L1 - Low Power with reduced net data rate 3. L2 - Low Power with red…
1.3.6.1.4.1.2011.6.115.1.1.1.1.9Columnvdsl2LineStatusInitResultread-onlycurrentIndicates the result of the last full initialization performed on the line. Options: 1. noFail (0) - Successful initialization 2. configError (1) - Configurati…
1.3.6.1.4.1.2011.6.115.1.1.1.1.10Columnvdsl2LineStatusLastStateDsread-onlycurrentThe last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line. States are per the spec…
1.3.6.1.4.1.2011.6.115.1.1.1.1.11Columnvdsl2LineStatusLastStateUsread-onlycurrentThe last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line. States are per the specif…
1.3.6.1.4.1.2011.6.115.1.1.1.1.12Columnvdsl2LineStatusXturread-onlycurrentIndicates current state (existing failures) of the xTU-R. This is a bit-map of possible conditions. The various bit positions are: noFailure(0), lossOfFraming(…
1.3.6.1.4.1.2011.6.115.1.1.1.1.13Columnvdsl2LineStatusXtucread-onlycurrentIndicates current state (existing failures) of the xTU-C. This is a bit-map of possible conditions. This BITS structure can report the following failures: 1. n…
1.3.6.1.4.1.2011.6.115.1.1.1.1.14Columnvdsl2LineStatusLnAttenDsread-onlycurrentThe measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub-carriers during diagnostics mode and…
1.3.6.1.4.1.2011.6.115.1.1.1.1.15Columnvdsl2LineStatusLnAttenUsread-onlycurrentThe measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all sub- carriers during diagnostics mode an…
1.3.6.1.4.1.2011.6.115.1.1.1.1.16Columnvdsl2LineStatusSigAttenDsread-onlycurrentThe measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub- carriers during Showtime. It ranges…
1.3.6.1.4.1.2011.6.115.1.1.1.1.17Columnvdsl2LineStatusSigAttenUsread-onlycurrentThe measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all sub- carriers during Showtime. It ranges…
1.3.6.1.4.1.2011.6.115.1.1.1.1.18Columnvdsl2LineStatusSnrMarginDsread-onlycurrentDownstream SNR Margin is the maximum increase in dB of the noise power received at the xTU-R, such that the BER requirements are met for all downstream bearer …
1.3.6.1.4.1.2011.6.115.1.1.1.1.19Columnvdsl2LineStatusSnrMarginUsread-onlycurrentUpstream SNR Margin is the maximum increase in dB of the noise power received at the xTU-C, such that the BER requirements are met for all downstream bearer ch…
1.3.6.1.4.1.2011.6.115.1.1.1.1.20Columnvdsl2LineStatusAttainableRateDsread-onlycurrentMaximum Attainable Data Rate Downstream. The maximum downstream net data rate currently attainable by the xTU-C transmitter and the xTU-R receiver, coded in bi…
1.3.6.1.4.1.2011.6.115.1.1.1.1.21Columnvdsl2LineStatusAttainableRateUsread-onlycurrentMaximum Attainable Data Rate Upstream. The maximum upstream net data rate currently attainable by the xTU-R transmitter and the xTU-C receiver, coded in bit/s.…
1.3.6.1.4.1.2011.6.115.1.1.1.1.22Columnvdsl2LineStatusActPsdDsread-onlycurrentActual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units o…
1.3.6.1.4.1.2011.6.115.1.1.1.1.23Columnvdsl2LineStatusActPsdUsread-onlycurrentActual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 …
1.3.6.1.4.1.2011.6.115.1.1.1.1.24Columnvdsl2LineStatusActAtpDsread-onlycurrentActual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement…
1.3.6.1.4.1.2011.6.115.1.1.1.1.25Columnvdsl2LineStatusActAtpUsread-onlycurrentActual Aggregate Transmit Power Upstream. The total amount of transmit power delivered by the xTU-R at the U-R reference point, at the instant of measurement. …
1.3.6.1.4.1.2011.6.115.1.1.1.1.26Columnvdsl2LineBandPlanread-onlycurrentBand contains a series of subcarriers. The first octet is the number of bands. Other octets describe the info of each band. Each band info is a pair of values …
1.3.6.1.4.1.2011.6.115.1.1.1.1.27Columnvdsl2LinePsdMaskClassSelectionread-onlycurrentThe sub class of VDSL2 PSD Mask.
1.3.6.1.4.1.2011.6.115.1.1.1.1.28Columnvdsl2LineCurrentVdsl2Profileread-onlycurrentThis configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line.
1.3.6.1.4.1.2011.6.115.1.1.1.1.29Columnvdsl2LineCnfgServiceProfread-writecurrentThe value of this object identifies the row in the VDSL2 Line Configuration Service Profile Table, (vdsl2ServProfTable), which applies for this VDSL2 line.
1.3.6.1.4.1.2011.6.115.1.1.1.1.30Columnvdsl2LineCnfgSpectrumProfread-writecurrentThe value of this object identifies the row in the VDSL2 Line Configuration Spectrum Profile Table, (vdsl2SpectrumProfTable), which applies for this VDSL2 line.
1.3.6.1.4.1.2011.6.115.1.1.1.1.31Columnvdsl2LineCnfgDpboProfread-writecurrentThe value of this object identifies the row in the VDSL2 Line Configuration Dpbo Profile Table, (vdsl2DpboProfTable), which applies for this VDSL2 line.
1.3.6.1.4.1.2011.6.115.1.1.1.1.32Columnvdsl2LineCnfgUpboProfread-writecurrentThe value of this object identifies the row in the VDSL2 Line Configuration Upbo Profile Table, (vdsl2UpboProfTable), which applies for this VDSL2 line.
1.3.6.1.4.1.2011.6.115.1.1.1.1.33Columnvdsl2LineCnfgNoiseMarginProfread-writecurrentThe value of this object identifies the row in the VDSL2 Line Configuration Noise Margin Profile Table, (vdsl2NoiseMarginProfTable), which applies for this VDS…
1.3.6.1.4.1.2011.6.115.1.1.1.1.34Columnvdsl2LineCnfgDelayINPProfread-writecurrentThe value of this object identifies the row in the VDSL2 Line Configuration Delay-INP Profile Table, (vdsl2DelayInpProfTable), which applies for this VDSL2 lin…
1.3.6.1.4.1.2011.6.115.1.1.1.1.35Columnvdsl2UpboProfKl0CpeValread-onlycurrentThe actual value of KL0-CPE parameter,it ranges from 0 to 1280 units of 0.1 dB. The invalid value is 4294967295. If data on the port cannot be queried, data on…
1.3.6.1.4.1.2011.6.115.1.1.1.1.36Columnvdsl2LineStatusCodingGainDsread-onlycurrentThe actual value of Coding gain downstream parameter,it ranges from 0 to 16 units of 0.5 dB. The invalid value is 4294967295. If data on the port cannot be que…
1.3.6.1.4.1.2011.6.115.1.1.1.1.37Columnvdsl2LineStatusCodingGainUsread-onlycurrentThe actual value of Coding gain upstream parameter,it ranges from 0 to 16 units of 0.5 dB. The invalid value is 4294967295. If data on the port cannot be queri…
1.3.6.1.4.1.2011.6.115.1.1.1.1.38Columnvdsl2LineStatusPcbDsread-onlycurrentThe actual value of power cut back downstream parameter, it ranges from 0 to 40 units of 1 dB. The invalid value is 4294967295. If data on the port cannot be q…
1.3.6.1.4.1.2011.6.115.1.1.1.1.39ColumnhwvdslDlmDsmprofileread-writecurrentThe value of this object identifies the row in the DLM/DSM Profile Table, which applies for this VDSL2 line.
1.3.6.1.4.1.2011.6.115.1.1.1.1.40Columnhwvdsl2LineActmoderead-onlycurrentActived mode after training between co and cpe. Options: 1. ADSL(1) - ETSI,T1.413 G992.1,G992.2 2. ADSL2(2) - G992.3,G992.4 3. ADSL2PLUS(3) - G992.5 4. VDSL(4)…
1.3.6.1.4.1.2011.6.115.1.1.1.1.41Columnvdsl2UpboProfKl0CoValread-onlycurrentThe actual value of KL0-CO parameter, it ranges from 0 to 1280 units of 0.1 dB. The invalid value is 4294967295. If data on the port cannot be queried, data on…
1.3.6.1.4.1.2011.6.115.1.1.1.1.42Columnvdsl2LineStatusRtxUsedDsread-onlycurrentThis parameter specifies whether G.998.4 retransmission is used in downstream. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in u…
1.3.6.1.4.1.2011.6.115.1.1.1.1.43Columnvdsl2LineStatusRtxUsedUsread-onlycurrentThis parameter specifies whether G.998.4 retransmission is used in upstream. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use…
1.3.6.1.4.1.2011.6.115.1.1.1.1.44Columnvdsl2LineStatusLastRetrainInforead-onlycurrentIndicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpe-l3-trigger(2) - The terminal initiates a lo…
1.3.6.1.4.1.2011.6.115.1.1.1.1.45Columnvdsl2UpboRxThreshDsread-onlycurrentThis parameter reports the downstream received signal level threshold value used in the Alternative Electrical Length Estimation method (ELE-M1). This paramete…
1.3.6.1.4.1.2011.6.115.1.1.1.1.46Columnvdsl2UpboRxThreshUsread-onlycurrentThis parameter reports the upstream received signal level threshold value used in the Alternative Electrical Length Estimation method (ELE-M1). This parameter …
1.3.6.1.4.1.2011.6.115.1.1.1.1.47Columnhwvdsl2LineStatusLineRateDsread-onlycurrentThe actual line rate downstream. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated o…
1.3.6.1.4.1.2011.6.115.1.1.1.1.48Columnhwvdsl2LineStatusLineRateUsread-onlycurrentThe actual line rate upstream. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on …
1.3.6.1.4.1.2011.6.115.1.1.1.1.49Columnhwvdsl2LineSplitterModeread-writecurrentThis parameter indicates which mode will be applied to the port splitter .The valid values for the splitter mode are 1 and 2. Options: 1. connect (1) - Splitte…
1.3.6.1.4.1.2011.6.115.1.1.1.1.50Columnhwvdsl2LineBackupread-writecurrentThis parameter indicates whether the port backup is enabled. Options: 1. enable(1) - Enable the port backup. 2. disable(2) - Disable the port backup.
1.3.6.1.4.1.2011.6.115.1.1.1.1.51Columnhwvdsl2LineBackupPortread-onlycurrentThis parameter indicates the backup port ifindex. If data on the port is invalid or no data is generated on the port, the port is not backed up. The invalid va…
1.3.6.1.4.1.2011.6.115.1.1.1.1.52Columnhwvdsl2LinePhyRcontrolread-writecurrentThis parameter indicates whether the PHY-R retransmission is enabling. In TR165 mode, the H80BVDPM board should be enabled when it works as ADSL mode. Options:…
1.3.6.1.4.1.2011.6.115.1.2Nodevdsl2Status
1.3.6.1.4.1.2011.6.115.1.2.1Tablevdsl2ChannelStatusTablenot-accessiblecurrentThe table vdsl2ChannelStatusTable contains status parameters of VDSL2 channel. The indexes of this table are ifIndex and vdsl2ChStatusUnit.
1.3.6.1.4.1.2011.6.115.1.2.1.1Rowvdsl2ChannelStatusEntrynot-accessiblecurrentThe table vdsl2ChannelStatusTable contains status parameters of VDSL2 channel. The indexes of this entry are ifIndex and vdsl2ChStatusUnit.
1.3.6.1.4.1.2011.6.115.1.2.1.1.1Columnvdsl2ChStatusUnitnot-accessiblecurrentThe termination unit xTU-C(1) or xTU-R(2).
1.3.6.1.4.1.2011.6.115.1.2.1.1.2Columnvdsl2ChStatusChannelNumread-onlycurrentProvides the bearer channel number associated with this row (i.e., the channel ifIndex). This enables determining the channel configuration profile and the cha…
1.3.6.1.4.1.2011.6.115.1.2.1.1.3Columnvdsl2ChStatusActDataRateread-onlycurrentIf retransmission is not used in a given transmit direction, this parameter reports the actual net data rate at which the bearer channel is operating in L0 pow…
1.3.6.1.4.1.2011.6.115.1.2.1.1.4Columnvdsl2ChStatusPrevDataRateread-onlycurrentIf retransmission is not used in a given transmit direction, this parameter reports the previous net data rate the bearer channel was operating at just before …
1.3.6.1.4.1.2011.6.115.1.2.1.1.5Columnvdsl2ChStatusActDelayread-onlycurrentIf retransmission is not used in a given transmit direction, this parameter is the actual one-way interleaving delay introduced by the PMS-TC excluding delay i…
1.3.6.1.4.1.2011.6.115.1.2.1.1.6Columnvdsl2ChStatusAtmStatusread-onlycurrentIndicates current state (existing failures) of the VDSL channel in case its Data Path is ATM. This is a bit-map of possible conditions. Options: 1. noDefect(0)…
1.3.6.1.4.1.2011.6.115.1.2.1.1.7Columnvdsl2ChStatusPtmStatusread-onlycurrentIndicates current state (existing failures) of the VDSL channel in case its Data Path is PTM. This is a bit-map of possible conditions. Options: 1. noFailure(0…
1.3.6.1.4.1.2011.6.115.1.2.1.1.8Columnvdsl2ChStatusINPread-onlycurrentIf retransmission is not used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) on the bearer channel in the L0 s…
1.3.6.1.4.1.2011.6.115.1.2.1.1.9Columnvdsl2ChStatusRSRedundancyread-onlycurrentThe actual number of Reed-Solomon redundancy bytes per codeword used in the latency path in which the bearer channel is transported. The value is coded in byte…
1.3.6.1.4.1.2011.6.115.1.2.1.1.10Columnvdsl2ChStatusRSSymbolsread-onlycurrentThe DMT Symbol number per codeword used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the port is…
1.3.6.1.4.1.2011.6.115.1.2.1.1.11Columnvdsl2ChStatusInterDepthread-onlycurrentThe actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The value ranges from 1 to 4096 by step of 1. The va…
1.3.6.1.4.1.2011.6.115.1.2.1.1.12Columnvdsl2ChStatusSymbolLengthread-onlycurrentThe actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. This value does not include trellis overhead. The…
1.3.6.1.4.1.2011.6.115.1.2.1.1.13Columnvdsl2ChStatusRSSizeread-onlycurrentThe actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the port…
1.3.6.1.4.1.2011.6.115.1.2.1.1.14Columnvdsl2ChStatusInterBlockLengthread-onlycurrentThe actual block length of the interleaver used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the…
1.3.6.1.4.1.2011.6.115.1.2.1.1.15Columnvdsl2ChStatusLPATHread-onlycurrentThe index of the actual latency path in which the bearer is transported. The invalid value is 4294967295. If data on the port is invalid or no data is generate…
1.3.6.1.4.1.2011.6.115.1.2.1.1.16Columnvdsl2ChStatusPhyRrrcBitsread-onlycurrentThe bits in the channel that used to retransmission. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no…
1.3.6.1.4.1.2011.6.115.1.2.1.1.17Columnvdsl2ChStatusPhyRtxQueueread-onlycurrentQueues in send buffer used for retransmission. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data …
1.3.6.1.4.1.2011.6.115.1.2.1.1.18Columnvdsl2ChStatusActNetDataRateread-onlycurrentIn L0 state, this parameter reports the Net Data Rate at which the bearer channel is operating. In L2 state, this parameter contains the Net Data Rate in the p…
1.3.6.1.4.1.2011.6.115.1.2.1.1.19Columnvdsl2ChStatusActINPAgainstREINread-onlycurrentIf retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditio…
1.3.6.1.4.1.2011.6.115.1.2.1.1.20Columnhwvdsl2ChStatusUnlimitedVersionEtruread-onlycurrentThe unlimited version of expected throughput in kbit/s:(1 - RTxOH) * NDR. This value is specified in G.998.4 (G.INP).
1.3.6.1.4.1.2011.6.115.1.2.2Tablevdsl2PrivSCStatusTablenot-accessiblecurrentThe table vdsl2PrivSCStatusTable contains status parameters of VDSL2 sub-carriers. The indexes of this table are ifIndex and vdsl2PrivSCStatusDirection.
1.3.6.1.4.1.2011.6.115.1.2.2.1Rowvdsl2PrivSCStatusEntrynot-accessiblecurrentThe table vdsl2PrivSCStatusTable contains status parameters of VDSL2 sub-carriers. The indexes of this entry are ifIndex and vdsl2PrivSCStatusDirection.
1.3.6.1.4.1.2011.6.115.1.2.2.1.1Columnvdsl2PrivSCStatusDirectionnot-accessiblecurrentThe direction of the sub-carrier either upstream or downstream.
1.3.6.1.4.1.2011.6.115.1.2.2.1.2Columnvdsl2PrivSCStatusMtimeread-onlycurrentSNR Measurement Time. The number of symbols used to measure the SNR values on the respective transmission direction. It should correspond to the value specifie…
1.3.6.1.4.1.2011.6.115.1.2.2.1.3Columnvdsl2PrivSCStatusSnrread-onlycurrentThe SNR Margin per sub-carrier, expressing the ratio between the received signal power and received noise power per subscriber. It is an array of 4096 bytes, d…
1.3.6.1.4.1.2011.6.115.1.2.2.1.4Columnvdsl2PrivSCStatusBitsAllocread-onlycurrentThe bits allocation per sub-carrier. An array of 2048 bytes, designed for supporting up to 4096 sub-carriers. The number of utilized nibbles on downstream dire…
1.3.6.1.4.1.2011.6.115.1.2.2.1.5Columnvdsl2PrivSCStatusGainAllocread-onlycurrentThe gain allocation per sub-carrier. An array of 8192 bytes, designed for supporting up to 4096 sub-carriers. The number of utilized octets on downstream direc…
1.3.6.1.4.1.2011.6.115.1.2.3Tablevdsl2SCStatusTablenot-accessiblecurrentThe table vdsl2SCStatusTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that DO NOT refer to specific sub-carriers. In addition, th…
1.3.6.1.4.1.2011.6.115.1.2.3.1Rowvdsl2SCStatusEntrynot-accessiblecurrentThe table vdsl2SCStatusTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that DO NOT refer to specific sub-carriers. In addition, th…
1.3.6.1.4.1.2011.6.115.1.2.3.1.1Columnvdsl2SCStatusDirectionnot-accessiblecurrentThe direction of the sub-carrier either upstream or downstream
1.3.6.1.4.1.2011.6.115.1.2.3.1.2Columnvdsl2SCStatusLinScaleread-onlycurrentThe scale factor to be applied to the H(f) linear representation values for the respective transmission direction. This parameter is only available after a loo…
1.3.6.1.4.1.2011.6.115.1.2.3.1.3Columnvdsl2SCStatusLinScGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4 a…
1.3.6.1.4.1.2011.6.115.1.2.3.1.4Columnvdsl2SCStatusLogMtread-onlycurrentThe number of symbols used to measure the H(f) logarithmic measurement values for the respective transmission direction. This parameter should correspond to th…
1.3.6.1.4.1.2011.6.115.1.2.3.1.5Columnvdsl2SCStatusLogScGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2…
1.3.6.1.4.1.2011.6.115.1.2.3.1.6Columnvdsl2SCStatusQlnMtread-onlycurrentThe number of symbols used to measure the Quiet Line Noise values on the respective transmission direction. This parameter should correspond to the value speci…
1.3.6.1.4.1.2011.6.115.1.2.3.1.7Columnvdsl2SCStatusQlnScGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For …
1.3.6.1.4.1.2011.6.115.1.2.3.1.8Columnvdsl2SCStatusMtimeread-onlycurrentSNR Measurement Time. The number of symbols used to measure the SNR values on the respective transmission direction. It should correspond to the value specifie…
1.3.6.1.4.1.2011.6.115.1.2.3.1.9Columnvdsl2SCStatusSnrScGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this par…
1.3.6.1.4.1.2011.6.115.1.2.3.1.10Columnvdsl2SCStatusAttainableRateread-onlycurrentMaximum Attainable Data Rate. The maximum net data rate currently attainable by the XTU-C transmitter and XTU-R receiver (when referring to downstream directio…
1.3.6.1.4.1.2011.6.115.1.2.3.1.11Columnvdsl2SCStatusActAtpread-onlycurrentActual Aggregate Transmit Power from the XTU (XTU-R on downstream direction and XTU-C on upstream direction), at the instant of measurement. It ranges from -31…
1.3.6.1.4.1.2011.6.115.1.2.3.1.12Columnvdsl2SCStatusRowStatusread-writecurrentRow Status. The SNMP agent should create rows in this table and in the vdsl2SCStatusTable for storing the results of a DELT performed on the associated line, i…
1.3.6.1.4.1.2011.6.115.1.2.3.1.13Columnvdsl2SCStatusProfileread-onlycurrentThis configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line.
1.3.6.1.4.1.2011.6.115.1.2.3.1.14Columnvdsl2SCStatusClassmaskread-onlycurrentIn order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: - Class 998 Annex A: D-32, D-6…
1.3.6.1.4.1.2011.6.115.1.2.4Tablevdsl2SCStatusBandTablenot-accessiblecurrentThe table vdsl2SCStatusBandTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that are grouped per-band. For ADSL/ADSL2/ADSL2+, there…
1.3.6.1.4.1.2011.6.115.1.2.4.1Rowvdsl2SCStatusBandEntrynot-accessiblecurrentThe table vdsl2SCStatusBandTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2 and ADSL2+ that are grouped per-band. For ADSL/ADSL2/ADSL2+, there…
1.3.6.1.4.1.2011.6.115.1.2.4.1.1Columnvdsl2SCStatusBandnot-accessiblecurrentThe transmission band. Identifies a band in a VDSL2/ADSL/ADSL2/ADSL2+ link. For a band in the upstream direction, transmission is from the remote end (xTU-R) t…
1.3.6.1.4.1.2011.6.115.1.2.4.1.2Columnvdsl2SCStatusBandLnAttenread-onlycurrentWhen referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by…
1.3.6.1.4.1.2011.6.115.1.2.4.1.3Columnvdsl2SCStatusBandSigAttenread-onlycurrentWhen referring to a band the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by th…
1.3.6.1.4.1.2011.6.115.1.2.4.1.4Columnvdsl2SCStatusBandSnrMarginread-onlycurrentSNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R on downstream direction and xTU-C on upstream direction), such that the …
1.3.6.1.4.1.2011.6.115.1.2.4.1.5Columnvdsl2SCStatusBandUpbokleread-onlycurrentThis parameter is a vector of UPBO electrical length per-band estimates for each supported upstream/downstream band, expressed in dB at 1 MHz (kl0) calculated …
1.3.6.1.4.1.2011.6.115.1.2.5Tablevdsl2SCStatusSegmentTablenot-accessiblecurrentThe table vdsl2SCStatusSegmentTable contains status parameters of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. Several objects in the table refer to NSus and NSds…
1.3.6.1.4.1.2011.6.115.1.2.5.1Rowvdsl2SCStatusSegmentEntrynot-accessiblecurrentThe table vdsl2SCStatusSegmentTable contains status parameters of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. Several objects in the table refer to NSus and NSds…
1.3.6.1.4.1.2011.6.115.1.2.5.1.1Columnvdsl2SCStatusSegmentnot-accessiblecurrentThe segment of the sub-carriers status information provided by this row. Several status parameters in this table are retrieved in segments. The first segment o…
1.3.6.1.4.1.2011.6.115.1.2.5.1.2Columnvdsl2SCStatusSegmentLinRealread-onlycurrentAn array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 …
1.3.6.1.4.1.2011.6.115.1.2.5.1.3Columnvdsl2SCStatusSegmentLinImgread-onlycurrentAn array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 …
1.3.6.1.4.1.2011.6.115.1.2.5.1.4Columnvdsl2SCStatusSegmentLogread-onlycurrentAn array of up to 512 real H(f) logarithmic representation values in dB for the respective transmission direction. It is designed to support up to 512 (downstr…
1.3.6.1.4.1.2011.6.115.1.2.5.1.5Columnvdsl2SCStatusSegmentQlnread-onlycurrentAn array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers …
1.3.6.1.4.1.2011.6.115.1.2.5.1.6Columnvdsl2SCStatusSegmentSnrread-onlycurrentThe SNR Margin per sub-carrier group, expressing the ratio between the received signal power and received noise power per sub-scriber group. It is an array of …
1.3.6.1.4.1.2011.6.115.1.2.5.1.7Columnvdsl2SCStatusSegmentBitsAllocread-onlycurrentThe bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. When more then 512 sub-…
1.3.6.1.4.1.2011.6.115.1.2.5.1.8Columnvdsl2SCStatusSegmentGainAllocread-onlycurrentThe gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carri…
1.3.6.1.4.1.2011.6.115.1.2.5.1.9Columnvdsl2SCStatusSegmentTssiread-onlycurrentThe transmit spectrum shaping (TSSi) breakpoints expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of values occupying 3 …
1.3.6.1.4.1.2011.6.115.1.2.5.1.65535Columnvdsl2SCStatusSegmentTxPSDread-onlycurrentThe TxPSD per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers are su…
1.3.6.1.4.1.2011.6.115.1.2.5.1.65536Columnvdsl2SCStatusSegmentSnrMarginread-onlycurrentThe SnrMargin per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers ar…
1.3.6.1.4.1.2011.6.115.1.2.5.1.65537Columnvdsl2SCStatusSegmentLogScGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2…
1.3.6.1.4.1.2011.6.115.1.2.5.1.65538Columnvdsl2SCStatusSegmentQlnScGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For …
1.3.6.1.4.1.2011.6.115.1.2.5.1.65539Columnvdsl2SCStatusSegmentLinScGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4 a…
1.3.6.1.4.1.2011.6.115.1.2.5.1.65540Columnvdsl2SCStatusSegmentSnrScGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this par…
1.3.6.1.4.1.2011.6.115.1.2.5.1.65541Columnhwvdsl2SCStatusSegmentQlnWithVectoringread-onlycurrentAn array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers …
1.3.6.1.4.1.2011.6.115.1.2.6TablehwVdslSCFextTablenot-accessiblecurrentThe table hwVdslSCFextTable contains FEXT coupling function parameters. The indexes of this table are ifIndex, hwVdslSCFextFromIfindex, and hwVdslSCFextRequest…
1.3.6.1.4.1.2011.6.115.1.2.6.1RowhwVdslSCFextEntrynot-accessiblecurrentThe table hwVdslSCFextTable contains FEXT coupling function parameters. The indexes of this entry are ifIndex, hwVdslSCFextFromIfindex, and hwVdslSCFextRequest…
1.3.6.1.4.1.2011.6.115.1.2.6.1.1ColumnhwVdslSCFextFromIfindexnot-accessiblecurrentThe hwVdslSCFextFromIfindex is an interface index where the interface has an ifType of vdsl2(251).
1.3.6.1.4.1.2011.6.115.1.2.6.1.2ColumnhwVdslSCFextRequestXLinScGroupSizenot-accessiblecurrentThis parameter is the requested value of XLING. The valid values are 1, 2, 4, 8, 16, 32, and 64.
1.3.6.1.4.1.2011.6.115.1.2.6.1.3ColumnhwVdslSCFextXLinScaleDsread-onlycurrentThis parameter is the scale factor to be applied to the downstream Xlinpsds values. It is represented as an unsigned integer in the range from 1 to 2^16 - 1.
1.3.6.1.4.1.2011.6.115.1.2.6.1.4ColumnhwVdslSCFextXlinScGroupSizeDsread-onlycurrentThis parameter is the number of subcarriers per group used to report Xlinpsds. The valid values are 1, 2, 4, 8, 16, 32, and 64. XLINGds should equal the sub-sa…
1.3.6.1.4.1.2011.6.115.1.2.6.1.5ColumnhwVdslSCFextXLinBandDsread-onlycurrentXLINBANDSds contains pairs of (start-subcarrier-index, stop-subcarrier-index) for every band in which XLINpsds is reported.
1.3.6.1.4.1.2011.6.115.1.2.6.1.6ColumnhwVdslSCFextXlinRealDsread-onlycurrentFor each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for downstream FEXT coupling coefficients Xlinds(f…
1.3.6.1.4.1.2011.6.115.1.2.6.1.7ColumnhwVdslSCFextXlinImgDsread-onlycurrentFor each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for downstream FEXT coupling coefficients Xlinds(f…
1.3.6.1.4.1.2011.6.115.1.2.6.1.8ColumnhwVdslSCFextXLinScaleUsread-onlycurrentThis parameter is the scale factor to be applied to the upstream Xlinpsus values. It is represented as an unsigned integer in the range from 1 to 2^16 - 1.
1.3.6.1.4.1.2011.6.115.1.2.6.1.9ColumnhwVdslSCFextXlinScGroupSizeUsread-onlycurrentThis parameter is the number of subcarriers per group used to report Xlinpsus. The valid values are 1, 2, 4, 8, 16, 32, and 64. XLINGus should equal the sub-sa…
1.3.6.1.4.1.2011.6.115.1.2.6.1.10ColumnhwVdslSCFextXLinBandUsread-onlycurrentXLINBANDSus contains pairs of (start-subcarrier-index, stop-subcarrier-index) for every band in which XLINpsus is reported.
1.3.6.1.4.1.2011.6.115.1.2.6.1.11ColumnhwVdslSCFextXlinRealUsread-onlycurrentFor each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for upstream FEXT coupling coefficients Xlinus(f) …
1.3.6.1.4.1.2011.6.115.1.2.6.1.12ColumnhwVdslSCFextXlinImgUsread-onlycurrentFor each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for upstream FEXT coupling coefficients Xlinus(f) …
1.3.6.1.4.1.2011.6.115.1.3Nodevdsl2Inventory
1.3.6.1.4.1.2011.6.115.1.3.1Tablevdsl2LineInventoryTablenot-accessiblecurrentThe table vdsl2LineInventoryTable contains inventory of VDSL2 unit. The indexes of this table are ifIndex and vdsl2LInvUnit.
1.3.6.1.4.1.2011.6.115.1.3.1.1Rowvdsl2LineInventoryEntrynot-accessiblecurrentThe table vdsl2LineInventoryTable contains inventory of VDSL2 unit. The indexes of this entry are ifIndex and vdsl2LInvUnit.
1.3.6.1.4.1.2011.6.115.1.3.1.1.1Columnvdsl2LInvUnitnot-accessiblecurrentThe termination unit XTUC{1} or XTUR{2}.
1.3.6.1.4.1.2011.6.115.1.3.1.1.2Columnvdsl2LInvG994VendorIdread-onlycurrentThe xTU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocat…
1.3.6.1.4.1.2011.6.115.1.3.1.1.3Columnvdsl2LInvSystemVendorIdread-onlycurrentThe xTU System Vendor ID (identifies the xTU system integrator) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Ope…
1.3.6.1.4.1.2011.6.115.1.3.1.1.4Columnvdsl2LInvVersionNumberread-onlycurrentThe xTU version number (vendor specific information) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Operations Cha…
1.3.6.1.4.1.2011.6.115.1.3.1.1.5Columnvdsl2LInvSerialNumberread-onlycurrentThe xTU serial number (vendor specific information) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Operations Chan…
1.3.6.1.4.1.2011.6.115.1.3.1.1.6Columnvdsl2LInvSelfTestResultread-onlycurrentThe xTU self-test result, coded as a 32-bit integer. The most significant octet of this object is '0' if the self-test passed, and '1' if the self-test failed.…
1.3.6.1.4.1.2011.6.115.1.3.1.1.7Columnvdsl2LInvTransmissionCapabilitiesread-onlycurrentThe xTU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' me…
1.3.6.1.4.1.2011.6.115.1.3.1.1.8Columnvdsl2LInvModelIdread-onlycurrentThe XTU model ID.
1.3.6.1.4.1.2011.6.115.1.4Nodevdsl2PM
1.3.6.1.4.1.2011.6.115.1.4.1Nodevdsl2PMLine
1.3.6.1.4.1.2011.6.115.1.4.1.1Tablevdsl2PMLineCurrTablenot-accessiblecurrentThe table vdsl2PMLineCurrTable contains current Performance Monitoring results of VDSL2 line. The indexes of this table are an interface index where the interf…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1Rowvdsl2PMLineCurrEntrynot-accessiblecurrentThe table vdsl2PMLineCurrTable contains current Performance Monitoring results of VDSL2 line. The indexes of this entry are an interface index where the interf…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.1Columnvdsl2PMLCurrUnitnot-accessiblecurrentThe termination unit XTUC{1} or XTUR{2}.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.2Columnvdsl2PMLCurrValidIntervalsread-onlycurrentValid intervals.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.3Columnvdsl2PMLCurrInvalidIntervalsread-onlycurrentInvalid intervals.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.4Columnvdsl2PMLCurr15MTimeElapsedread-onlycurrentTotal elapsed seconds in this interval. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.5Columnvdsl2PMLCurr15MFecsread-onlycurrentCount of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.6Columnvdsl2PMLCurr15MEsread-onlycurrentCount of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 xTU-R: F…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.7Columnvdsl2PMLCurr15MSesread-onlycurrentCount of seconds during this interval that there was: xTU-C: If G.998.4 is supported and retransmission is enabled in the near-end received direction, a SES is…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.8Columnvdsl2PMLCurr15MLossread-onlycurrentCount of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.9Columnvdsl2PMLCurr15MUasread-onlycurrentCount of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the on…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.10Columnvdsl2PMLCurr1DayValidIntervalsread-onlycurrentValid intervals.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.11Columnvdsl2PMLCurr1DayInvalidIntervalsread-onlycurrentInvalid intervals.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.12Columnvdsl2PMLCurr1DayTimeElapsedread-onlycurrentTotal elapsed seconds in this interval. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.13Columnvdsl2PMLCurr1DayFecsread-onlycurrentCount of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.14Columnvdsl2PMLCurr1DayEsread-onlycurrentCount of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: …
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.15Columnvdsl2PMLCurr1DaySesread-onlycurrentCount of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.16Columnvdsl2PMLCurr1DayLossread-onlycurrentCount of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.17Columnvdsl2PMLCurr1DayUasread-onlycurrentCount of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the o…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.18Columnvdsl2PMLEverBeforeFecsread-onlycurrentCount of seconds since agent reset that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited d…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.19Columnvdsl2PMLEverBeforeEsread-onlycurrentCount of seconds since agent reset that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: FEB…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.20Columnvdsl2PMLEverBeforeSesread-onlycurrentCount of seconds since agent reset that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: …
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.21Columnvdsl2PMLEverBeforeLossread-onlycurrentCount of seconds since agent reset that there was LOS (or LOS-FE for xTU-R). Huawei defined. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.22Columnvdsl2PMLEverBeforeUasread-onlycurrentCount of seconds in Unavailability State since agent reset. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the onse…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.23Columnvdsl2PMLCurr15MLofsread-onlycurrentCount of seconds in the current 15 minute interval when there was Loss of Framing. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.24Columnvdsl2PMLCurr15MLolsread-onlycurrentCount of seconds in the current 15 minute interval when there was Loss of Link. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.25Columnvdsl2PMLCurr15MLopsread-onlycurrentCount of seconds in the current 15 minute interval when there was Loss of Power. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.26Columnvdsl2PMLCurr1DayLofsread-onlycurrentCount of the number of seconds when there was Loss of Framing during the current day. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.27Columnvdsl2PMLCurr1DayLolsread-onlycurrentCount of the number of seconds when there was Loss of Link during the current day. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.28Columnvdsl2PMLCurr1DayLopsread-onlycurrentCount of the number of seconds when there was Loss of Power during the current day. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.29Columnvdsl2PMLEverBeforeLofsread-onlycurrentCount of the number of seconds when there was Loss of Framing since agent reset. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.30Columnvdsl2PMLEverBeforeLolsread-onlycurrentCount of the number of seconds when there was Loss of Link since agent reset. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.31Columnvdsl2PMLEverBeforeLopsread-onlycurrentCount of the number of seconds when there was Loss of Power since agent reset. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.32Columnvdsl2PMLCurr15MSosSuccessread-onlycurrentCount of the total number of successful SOS procedures initiated in the current 15 minute. Unit: times
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.33Columnvdsl2PMLCurr1DaySosSuccessread-onlycurrentCount of the total number of successful SOS procedures initiated during the current day. Unit: times
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.34Columnvdsl2PMLEverBeforeSosSuccessread-onlycurrentCount of the total number of successful SOS procedures initiated since agent reset. Unit: times
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.35Columnvdsl2PMLCurr15MInmainpeqread-onlycurrentThis parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.36Columnvdsl2PMLCurr15MInmameread-onlycurrentThis parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.37Columnvdsl2PMLCurr15MInmaiatread-onlycurrentThis parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.38Columnvdsl2PMLCurr1DayInmainpeqread-onlycurrentThis parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.39Columnvdsl2PMLCurr1DayInmameread-onlycurrentThis parameter is a count of the INMAME anomalies occurring on the line during current 1 day.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.40Columnvdsl2PMLCurr1DayInmaiatread-onlycurrentThis parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.41Columnvdsl2PMLEverBeforeInmainpeqread-onlycurrentThis parameter is a count of the INMAINPEQi anomalies occurring on the line ever before.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.42Columnvdsl2PMLEverBeforeInmameread-onlycurrentThis parameter is a count of the INMAME anomalies occurring on the line ever before.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.43Columnvdsl2PMLEverBeforeInmaiatread-onlycurrentThis parameter is a count of the INMAIATi anomalies occurring on the line ever before.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.44Columnvdsl2PMLineCurr15MStartTimeread-onlycurrentStart time of the current 15-minute performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.45Columnvdsl2PMLineCurr1DayStartTimeread-onlycurrentStart time of the current 1-day performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.46Columnvdsl2PMLCurr15MLeftrsread-onlycurrentIf retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 min…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.47Columnvdsl2PMLCurr15MEfbread-onlycurrentIf retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation p…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.48Columnvdsl2PMLCurr15MMinEftrread-onlycurrentIf retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minute…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.49Columnvdsl2PMLCurr1DayLeftrsread-onlycurrentIf retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hou…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.50Columnvdsl2PMLCurr1DayEfbread-onlycurrentIf retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation per…
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.51Columnvdsl2PMLCurr1DayMinEftrread-onlycurrentIf retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours …
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.52Columnvdsl2PMLEverBeforeLeftrsread-onlycurrentIf retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed ever before.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.53Columnvdsl2PMLEverBeforeEfbread-onlycurrentIf retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.54Columnvdsl2PMLEverBeforeMinEftrread-onlycurrentIf retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed ever before.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.55Columnhwvdsl2PMLEverBeforeSraDownShiftEventread-onlycurrentThis parameter is a count of sra downshift event occurring on the line ever before.
1.3.6.1.4.1.2011.6.115.1.4.1.1.1.56Columnhwvdsl2PMLEverBeforeSraUpShiftEventread-onlycurrentThis parameter is a count of sra upshift event occurring on the line ever before.
1.3.6.1.4.1.2011.6.115.1.4.1.2Tablevdsl2PMLineCurrInitTablenot-accessiblecurrentThe table vdsl2PMLineCurrInitTable contains current initialization counters of VDSL2 line. The indexes of this table are an interface index where the interface…
1.3.6.1.4.1.2011.6.115.1.4.1.2.1Rowvdsl2PMLineCurrInitEntrynot-accessiblecurrentThe table vdsl2PMLineCurrInitTable contains current initialization counters of VDSL2 line. The indexes of this entry are an interface index where the interface…
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.1Columnvdsl2PMLCurrInit15MTimeElapsedread-onlycurrentTotal elapsed seconds in this interval. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.2Columnvdsl2PMLCurrInit15MFullInitsread-onlycurrentCount of full initializations attempted on the line (successful and failed) during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.3Columnvdsl2PMLCurrInit15MFailedFullInitsread-onlycurrentCount of failed full initializations on the line during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.4Columnvdsl2PMLCurrInit15MShortInitsread-onlycurrentCount of short initializations attempted on the line (successful and failed) during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.5Columnvdsl2PMLCurrInit15MFailedShortInitsread-onlycurrentCount of failed short initializations on the line during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.6Columnvdsl2PMLCurrInit1DayTimeElapsedread-onlycurrentTotal elapsed seconds in this interval. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.7Columnvdsl2PMLCurrInit1DayFullInitsread-onlycurrentCount of full initializations attempted on the line (successful and failed) during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.8Columnvdsl2PMLCurrInit1DayFailedFullInitsread-onlycurrentCount of failed full initializations on the line during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.9Columnvdsl2PMLCurrInit1DayShortInitsread-onlycurrentCount of short initializations attempted on the line (successful and failed) during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.10Columnvdsl2PMLCurrInit1DayFailedShortInitsread-onlycurrentCount of failed short initializations on the line during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.11Columnvdsl2PMLInitEverBeforeFullInitsread-onlycurrentCount of full initializations attempted on the line (successful and failed) since agent reset. Huawei defined.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.12Columnvdsl2PMLInitEverBeforeFailedFullInitsread-onlycurrentCount of failed full initializations on the line since agent reset. Huawei defined.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.13Columnvdsl2PMLInitEverBeforeShortInitsread-onlycurrentCount of short initializations attempted on the line (successful and failed) since agent reset. Huawei defined.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.14Columnvdsl2PMLInitEverBeforeFailedShortInitsread-onlycurrentCount of failed short initializations on the line since agent reset. Huawei defined.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.15Columnvdsl2PMLineCurrInit15MStartTimeread-onlycurrentStart time of the current initializations 15-minute performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.1.2.1.16Columnvdsl2PMLineCurrInit1DayStartTimeread-onlycurrentStart time of the current initializations 1-day performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.1.3Tablevdsl2PMLineHist15MinTablenot-accessiblecurrentThe table vdsl2PMLineHist15MinTable contains PM line history for 15min intervals of VDSL2 line. The indexes of this table are an interface index where the inte…
1.3.6.1.4.1.2011.6.115.1.4.1.3.1Rowvdsl2PMLineHist15MinEntrynot-accessiblecurrentThe table vdsl2PMLineHist15MinTable contains PM line history for 15min intervals of VDSL2 line. The indexes of this entry are an interface index where the inte…
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.1Columnvdsl2PMLHist15MUnitnot-accessiblecurrentThe termination unit XTUC{1} or XTUR{2}.
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.2Columnvdsl2PMLHist15MIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.3Columnvdsl2PMLHist15MMonitoredTimeread-onlycurrentTotal seconds monitored in this interval. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.4Columnvdsl2PMLHist15MFecsread-onlycurrentCount of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite…
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.5Columnvdsl2PMLHist15MEsread-onlycurrentCount of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: …
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.6Columnvdsl2PMLHist15MSesread-onlycurrentCount of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-…
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.7Columnvdsl2PMLHist15MLossread-onlycurrentCount of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.8Columnvdsl2PMLHist15MUasread-onlycurrentCount of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the o…
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.9Columnvdsl2PMLHist15MValidIntervalread-onlycurrentThis variable indicates if the data for this interval is valid.
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.10Columnvdsl2PMLHist15MLofsread-onlycurrentCount of seconds in the interval when there was Loss of Framing. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.11Columnvdsl2PMLHist15MLolsread-onlycurrentCount of seconds in the interval when there was Loss of Link. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.12Columnvdsl2PMLHist15MLopsread-onlycurrentCount of seconds in the interval when there was Loss of Power. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.13Columnvdsl2PMLHist15MSosSuccessread-onlycurrentCount of the total number of successful SOS procedures initiated in the interval. Unit: times
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.14Columnvdsl2PMLHist15MInmainpeqread-onlycurrentThis parameter is a count of the INMAINPEQi anomalies occurring on the line over the 15 minutes accumulation period.
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.15Columnvdsl2PMLHist15MInmameread-onlycurrentThis parameter is a count of the INMAME anomalies occurring on the line over the 15 minutes accumulation period.
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.16Columnvdsl2PMLHist15MInmaiatread-onlycurrentThis parameter is a count of the INMAIATi anomalies occurring on the line over the 15 minutes accumulation period.
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.17Columnvdsl2PMLHist15MStartTimeread-onlycurrentStart time of the historical 15-minute performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.18Columnvdsl2PMLHist15MLeftrsread-onlycurrentIf retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 min…
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.19Columnvdsl2PMLHist15MEfbread-onlycurrentIf retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation p…
1.3.6.1.4.1.2011.6.115.1.4.1.3.1.20Columnvdsl2PMLHist15MMinEftrread-onlycurrentIf retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minute…
1.3.6.1.4.1.2011.6.115.1.4.1.4Tablevdsl2PMLineHist1DayTablenot-accessiblecurrentThe table vdsl2PMLineHist1DayTable contains PM line history for 24 hours intervals of VDSL2 line. The indexes of this table are an interface index where the in…
1.3.6.1.4.1.2011.6.115.1.4.1.4.1Rowvdsl2PMLineHist1DayEntrynot-accessiblecurrentThe table vdsl2PMLineHist1DayTable contains PM line history for 24 hours intervals of VDSL2 line. The indexes of this entry are an interface index where the in…
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.1Columnvdsl2PMLHist1DUnitnot-accessiblecurrentThe termination unit.
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.2Columnvdsl2PMLHist1DIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.3Columnvdsl2PMLHist1DMonitoredTimeread-onlycurrentTotal seconds monitored in this interval. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.4Columnvdsl2PMLHist1DFecsread-onlycurrentCount of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite…
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.5Columnvdsl2PMLHist1DEsread-onlycurrentCount of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: …
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.6Columnvdsl2PMLHist1DSesread-onlycurrentCount of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >> 1 OR LPR >= 1 x…
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.7Columnvdsl2PMLHist1DLossread-onlycurrentCount of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.8Columnvdsl2PMLHist1DUasread-onlycurrentCount of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the o…
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.9Columnvdsl2PMLHist1DValidIntervalread-onlycurrentThis variable indicates if the data for this interval is valid.
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.10Columnvdsl2PMLHist1DLofsread-onlycurrentCount of seconds during this interval that there was Loss of Framing. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.11Columnvdsl2PMLHist1DLolsread-onlycurrentCount of seconds during this interval that there was Loss of Link. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.12Columnvdsl2PMLHist1DLopsread-onlycurrentCount of seconds during this interval that there was Loss of Power. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.13Columnvdsl2PMLHist1DSosSuccessread-onlycurrentCount of the total number of successful SOS procedures initiated during this interval. Unit: times
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.14Columnvdsl2PMLHist1DInmainpeqread-onlycurrentThis parameter is a count of the INMAINPEQi anomalies occurring on the line over the 24 hours accumulation period.
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.15Columnvdsl2PMLHist1DInmameread-onlycurrentThis parameter is a count of the INMAME anomalies occurring on the line over the 24 hours accumulation period.
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.16Columnvdsl2PMLHist1DInmaiatread-onlycurrentThis parameter is a count of the INMAIATi anomalies occurring on the line over the 24 hours accumulation period.
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.17Columnvdsl2PMLHist1DStartTimeread-onlycurrentStart time of the historical 1-day performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.18Columnvdsl2PMLHist1DLeftrsread-onlycurrentIf retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hou…
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.19Columnvdsl2PMLHist1DEfbread-onlycurrentIf retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation per…
1.3.6.1.4.1.2011.6.115.1.4.1.4.1.20Columnvdsl2PMLHist1DMinEftrread-onlycurrentIf retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours …
1.3.6.1.4.1.2011.6.115.1.4.1.5Tablevdsl2PMLineInitHist15MinTablenot-accessiblecurrentThe table vdsl2PMLineInitHist15MinTable contains PM line initialization history for 15 minutes intervals of VDSL2 line. The indexes of this table are an interf…
1.3.6.1.4.1.2011.6.115.1.4.1.5.1Rowvdsl2PMLineInitHist15MinEntrynot-accessiblecurrentThe table vdsl2PMLineInitHist15MinTable contains PM line initialization history for 15 minutes intervals of VDSL2 line. The indexes of this entry are an interf…
1.3.6.1.4.1.2011.6.115.1.4.1.5.1.1Columnvdsl2PMLHistInit15MIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.2011.6.115.1.4.1.5.1.2Columnvdsl2PMLHistInit15MMonitoredTimeread-onlycurrentTotal seconds monitored in this interval. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.1.5.1.3Columnvdsl2PMLHistInit15MFullInitsread-onlycurrentCount of full initializations attempted on the line (successful and failed) during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.5.1.4Columnvdsl2PMLHistInit15MFailedFullInitsread-onlycurrentCount of failed full initializations on the line during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.5.1.5Columnvdsl2PMLHistInit15MShortInitsread-onlycurrentCount of short initializations attempted on the line (successful and failed) during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.5.1.6Columnvdsl2PMLHistInit15MFailedShortInitsread-onlycurrentCount of failed short initializations on the line during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.5.1.7Columnvdsl2PMLHistInit15MValidIntervalread-onlycurrentThis variable indicates if the data for this interval is valid.
1.3.6.1.4.1.2011.6.115.1.4.1.5.1.8Columnvdsl2PMLHistInit15MStartTimeread-onlycurrentStart time of the historical initializations 15-minute performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.1.6Tablevdsl2PMLineInitHist1DayTablenot-accessiblecurrentThe table vdsl2PMLineInitHist1DayTable contains PM line initialization history for 24 hours intervals of VDSL2 line. The indexes of this table are an interface…
1.3.6.1.4.1.2011.6.115.1.4.1.6.1Rowvdsl2PMLineInitHist1DayEntrynot-accessiblecurrentThe table vdsl2PMLineInitHist1DayTable contains PM line initialization history for 24 hours intervals of VDSL2 line. The indexes of this entry are an interface…
1.3.6.1.4.1.2011.6.115.1.4.1.6.1.1Columnvdsl2PMLHistinit1DIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.2011.6.115.1.4.1.6.1.2Columnvdsl2PMLHistinit1DMonitoredTimeread-onlycurrentTotal seconds monitored in this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.6.1.3Columnvdsl2PMLHistinit1DFullInitsread-onlycurrentCount of full initializations attempted on the line (successful and failed) during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.6.1.4Columnvdsl2PMLHistinit1DFailedFullInitsread-onlycurrentCount of failed full initializations on the line during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.6.1.5Columnvdsl2PMLHistinit1DShortInitsread-onlycurrentCount of short initializations attempted on the line (successful and failed) during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.6.1.6Columnvdsl2PMLHistinit1DFailedShortInitsread-onlycurrentCount of failed short initializations on the line during this interval.
1.3.6.1.4.1.2011.6.115.1.4.1.6.1.7Columnvdsl2PMLHistinit1DValidIntervalread-onlycurrentThis variable indicates if the data for this interval is valid.
1.3.6.1.4.1.2011.6.115.1.4.1.6.1.8Columnvdsl2PMLHistinit1DStartTimeread-onlycurrentStart time of the historical initializations 1-day performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.2Nodevdsl2PMChannel
1.3.6.1.4.1.2011.6.115.1.4.2.1Tablevdsl2PMChCurrTablenot-accessiblecurrentThe table vdsl2PMChCurrTable contains current Performance Monitoring results of VDSL2 channel. The indexes of this table are an interface index where the inter…
1.3.6.1.4.1.2011.6.115.1.4.2.1.1Rowvdsl2PMChCurrEntrynot-accessiblecurrentThe table vdsl2PMChCurrTable contains current Performance Monitoring results of VDSL2 channel. The indexes of this entry are an interface index where the inter…
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.1Columnvdsl2PMChCurrUnitnot-accessiblecurrentThe termination unit.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.2Columnvdsl2PMChCurrValidIntervalsread-onlycurrentValid intervals.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.3Columnvdsl2PMChCurrInvalidIntervalsread-onlycurrentInvalid intervals.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.4Columnvdsl2PMChCurr15MTimeElapsedread-onlycurrentTotal elapsed seconds in this interval. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.5Columnvdsl2PMChCurr15MCodingViolationsread-onlycurrentCount of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov…
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.6Columnvdsl2PMChCurr15MCorrectedBlocksread-onlycurrentCount of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If …
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.7Columnvdsl2PMChCurr1DayValidIntervalsread-onlycurrentValid intervals.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.8Columnvdsl2PMChCurr1DayInvalidIntervalsread-onlycurrentInvalid intervals.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.9Columnvdsl2PMChCurr1DayTimeElapsedread-onlycurrentTotal elapsed seconds in this interval. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.10Columnvdsl2PMChCurr1DayCodingViolationsread-onlycurrentCount of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov…
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.11Columnvdsl2PMChCurr1DayCorrectedBlocksread-onlycurrentCount of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If …
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.12Columnvdsl2PMChEverBeforeCodingViolationsread-onlycurrentCount of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If the CRC is applied over…
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.13Columnvdsl2PMChEverBeforeCorrectedBlocksread-onlycurrentCount of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If th…
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.14Columnvdsl2PMChCurr15MEncodedBlocksread-onlycurrentCount of all encoded blocks received on this channel within the current 15 minute interval.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.15Columnvdsl2PMChCurr15MUncorrectableBlocksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel within the current 15 minute interval.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.16Columnvdsl2PMChCurr1DayEncodedBlocksread-onlycurrentCount of all encoded blocks received on this channel during the current day.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.17Columnvdsl2PMChCurr1DayUncorrectableBlocksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel during the current day.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.18Columnvdsl2PMChEverBeforeEncodedBlocksread-onlycurrentCount of all encoded blocks received on this channel since agent reset.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.19Columnvdsl2PMChEverBeforeUncorrectableBlocksread-onlycurrentCount of all blocks received with uncorrectable errors since agent reset.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.20Columnvdsl2PMChCurr15MAtmCellsread-onlycurrentCount of Atm Cells received within the current 15 minute interval.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.21Columnvdsl2PMChCurr15MPtmPacketsread-onlycurrentCount of Ptm Packet received within the current 15 minute interval.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.22Columnvdsl2PMChCurr1DayAtmCellsread-onlycurrentCount of Atm Cells received during the current day.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.23Columnvdsl2PMChCurr1DayPtmPacketsread-onlycurrentCount of Ptm Packets received during the current day.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.24Columnvdsl2PMChEverBeforeAtmCellsread-onlycurrentCount of Atm Cells received since agent reset.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.25Columnvdsl2PMChEverBeforePtmPacketsread-onlycurrentCount of Ptm Packets received since agent reset.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.26Columnvdsl2PMChCurr15MRtxCWread-onlycurrentCount of units request retransmission within the current 15 minute interval.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.27Columnvdsl2PMChCurr15MRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission within the current 15 minute interval.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.28Columnvdsl2PMChCurr15MRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission within the current 15 minute interval.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.29Columnvdsl2PMChCurr1DayRtxCWread-onlycurrentCount of units request retransmission during the current day.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.30Columnvdsl2PMChCurr1DayRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission during the current day.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.31Columnvdsl2PMChCurr1DayRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission during the current day.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.32Columnvdsl2PMChEverBeforeRtxCWread-onlycurrentCount of units request retransmission since agent reset.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.33Columnvdsl2PMChEverBeforeRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission since agent reset.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.34Columnvdsl2PMChEverBeforeRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission since agent reset.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.35Columnvdsl2PMChCurr15MStartTimeread-onlycurrentStart time of the channel current 15-minute performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.2.1.1.36Columnvdsl2PMChCurr1DayStartTimeread-onlycurrentStart time of the channel current 1-day performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.2.2Tablevdsl2PMChHist15MinTablenot-accessiblecurrentThe table vdsl2PMChHist15MinTable contains PM channel history for 15min intervals of VDSL2 channel. The indexes of this table are an interface index where the …
1.3.6.1.4.1.2011.6.115.1.4.2.2.1Rowvdsl2PMChHist15MinEntrynot-accessiblecurrentThe table vdsl2PMChHist15MinTable contains PM channel history for 15min intervals of VDSL2 channel. The indexes of this entry are an interface index where the …
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.1Columnvdsl2PMChHist15MUnitnot-accessiblecurrentThe termination unit.
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.2Columnvdsl2PMChHist15MIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.3Columnvdsl2PMChHist15MMonitoredTimeread-onlycurrentTotal seconds monitored in this interval. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.4Columnvdsl2PMChHist15MCodingViolationsread-onlycurrentCount of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov…
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.5Columnvdsl2PMChHist15MCorrectedBlocksread-onlycurrentCount of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If …
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.6Columnvdsl2PMChHist15MValidIntervalread-onlycurrentThis variable indicates if the data for this interval is valid.
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.7Columnvdsl2PMChHist15MEncodedBlocksread-onlycurrentCount of all encoded blocks received on this channel during the interval.
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.8Columnvdsl2PMChHist15MUncorrectableBlocksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel during the interval.
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.9Columnvdsl2PMChHist15MAtmCellsread-onlycurrentCount of Atm Cells received on this channel during the interval.
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.10Columnvdsl2PMChHist15MPtmPacketsread-onlycurrentCount of Ptm Packets received on this channel during the interval.
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.11Columnvdsl2PMChHist15MRtxCWread-onlycurrentCount of units request retransmission during the serval 15 minute interval of history.
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.12Columnvdsl2PMChHist15MRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission during the serval 15 minute interval of history.
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.13Columnvdsl2PMChHist15MRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission during the serval 15 minute interval of history.
1.3.6.1.4.1.2011.6.115.1.4.2.2.1.14Columnvdsl2PMChHist15MStartTimeread-onlycurrentStart time of the channel historical 15-minute performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.2.3Tablevdsl2PMChHist1DTablenot-accessiblecurrentThe table vdsl2PMChHist1DTable contains PM channel history for 1 day intervals of VDSL2. The indexes of this table are an interface index where the interface h…
1.3.6.1.4.1.2011.6.115.1.4.2.3.1Rowvdsl2PMChHist1DEntrynot-accessiblecurrentThe table vdsl2PMChHist1DTable contains PM channel history for 1 day intervals of VDSL2. The indexes of this entry are an interface index where the interface h…
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.1Columnvdsl2PMChHist1DUnitnot-accessiblecurrentThe termination unit.
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.2Columnvdsl2PMChHist1DIntervalnot-accessiblecurrentThe interval number.
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.3Columnvdsl2PMChHist1DMonitoredTimeread-onlycurrentTotal seconds monitored in this interval. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.4Columnvdsl2PMChHist1DCodingViolationsread-onlycurrentCount of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov…
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.5Columnvdsl2PMChHist1DCorrectedBlocksread-onlycurrentCount of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If …
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.6Columnvdsl2PMChHist1DValidIntervalread-onlycurrentThis variable indicates if the data for this interval is valid.
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.7Columnvdsl2PMChHist1DEncodedBlocksread-onlycurrentCount of all encoded blocks received on this channel during the interval.
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.8Columnvdsl2PMChHist1DUncorrectableBlocksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel during the interval.
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.9Columnvdsl2PMChHist1DAtmCellsread-onlycurrentCount of Atm Cells received on this channel during the interval.
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.10Columnvdsl2PMChHist1DPtmPacketsread-onlycurrentCount of Ptm Packets received on this channel during the interval.
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.11Columnvdsl2PMChHist1DRtxCWread-onlycurrentCount of units request retransmission within the serval one day interval of history.
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.12Columnvdsl2PMChHist1DRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission during the serval one day interval of history.
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.13Columnvdsl2PMChHist1DRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission during the serval one day interval of history.
1.3.6.1.4.1.2011.6.115.1.4.2.3.1.14Columnvdsl2PMChHist1DStartTimeread-onlycurrentStart time of the channel historical 1-day performance statistics.
1.3.6.1.4.1.2011.6.115.1.4.2.4Tablevdsl2PMChChipStatTablenot-accessiblecurrentThe table vdsl2PMChChipStatTable contains packets and CRC errors on chipset of upstream and downstream of VDSL2 channel. The indexes of this table are an inter…
1.3.6.1.4.1.2011.6.115.1.4.2.4.1Rowvdsl2PMChChipStatEntrynot-accessiblecurrentThe table vdsl2PMChChipStatTable contains packets and CRC errors on chipset of upstream and downstream of VDSL2 channel. The indexes of this entry are an inter…
1.3.6.1.4.1.2011.6.115.1.4.2.4.1.1Columnvdsl2PMChChipstatUnitnot-accessiblecurrentThe termination unit.
1.3.6.1.4.1.2011.6.115.1.4.2.4.1.2Columnvdsl2PMChPktsDsread-onlycurrentThe number of downstream packets.
1.3.6.1.4.1.2011.6.115.1.4.2.4.1.3Columnvdsl2PMChPktsUsread-onlycurrentThe number of upstream packets.
1.3.6.1.4.1.2011.6.115.1.4.2.4.1.4Columnvdsl2PMChCrcErrsDsread-onlycurrentThe number of downstream CRC errors.
1.3.6.1.4.1.2011.6.115.1.4.2.4.1.5Columnvdsl2PMChCrcErrsUsread-onlycurrentThe number of upstream CRC errors.
1.3.6.1.4.1.2011.6.115.1.4.2.4.1.6Columnvdsl2PMChStatAdminStatusread-writecurrentClear the number of packets transmitted and received, CRC errors upstream and downstream. Options: 1. reset(1) - reset statistic data
1.3.6.1.4.1.2011.6.115.1.5Nodevdsl2Profile
1.3.6.1.4.1.2011.6.115.1.5.1Nodevdsl2ProfileLine
1.3.6.1.4.1.2011.6.115.1.5.1.1Tablevdsl2LineConfTemplateTablenot-accessiblecurrentThe table vdsl2LineConfTemplateTable contains VDSL2 line configuration template. The index of this table is vdsl2LConfTempTemplateName. A default template with…
1.3.6.1.4.1.2011.6.115.1.5.1.1.1Rowvdsl2LineConfTemplateEntrynot-accessiblecurrentThe table vdsl2LineConfTemplateTable contains VDSL2 line configuration template. The index of this entry is vdsl2LConfTempTemplateName. A default template with…
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.1Columnvdsl2LConfTempTemplateNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.2Columnvdsl2LConfTempLineProfileread-createcurrentThe value of this object identifies the row in the VDSL2 Line Configuration Profile Table, (Vdsl2LineConfProfileTable), which applies for this VDSL2 line.
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.3Columnvdsl2LConfTempChan1ConfProfileread-createcurrentThe value of this object identifies the row in the VDSL2 Channel Configuration Profile Table, (Vdsl2ChanConfProfileTable) that applies to VDSL2 bearer channel …
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.4Columnvdsl2LConfTempChan1RaRatioDsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Downstream. The ratio re…
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.5Columnvdsl2LConfTempChan1RaRatioUsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Upstream. The ratio refe…
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.6Columnvdsl2LConfTempChan2ConfProfileread-createcurrentThe value of this object identifies the row in the VDSL2 Channel Configuration Profile Table, (Vdsl2ChanConfProfileTable) that applies to VDSL2 bearer channel …
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.7Columnvdsl2LConfTempChan2RaRatioDsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Downstream. The ratio re…
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.8Columnvdsl2LConfTempChan2RaRatioUsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Upstream. The ratio refe…
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.9Columnvdsl2LConfTempChan3ConfProfileread-createcurrentThe value of this object identifies the row in the VDSL2 Channel Configuration Profile Table, (Vdsl2ChanConfProfileTable) that applies to VDSL2 bearer channel …
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.10Columnvdsl2LConfTempChan3RaRatioDsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #3 when performing rate adaptation on Downstream. The ratio re…
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.11Columnvdsl2LConfTempChan3RaRatioUsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #3 when performing rate adaptation on Upstream. The ratio refe…
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.12Columnvdsl2LConfTempChan4ConfProfileread-createcurrentThe value of this object identifies the row in the VDSL2 Channel Configuration Profile Table (Vdsl2ChanConfProfileTableDs) that applies to VDSL2 bearer channel…
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.13Columnvdsl2LConfTempChan4RaRatioDsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #4 when performing rate adaptation on Downstream. The ratio re…
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.14Columnvdsl2LConfTempChan4RaRatioUsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #4 when performing rate adaptation on Upstream. The ratio refe…
1.3.6.1.4.1.2011.6.115.1.5.1.1.1.15Columnvdsl2LConfTempRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.1.2Tablevdsl2LineConfProfTablenot-accessiblecurrentThe table vdsl2LineConfProfTable contains VDSL2 line profile configuration. The index of this table is vdsl2LConfProfProfileName. A default profile with an ind…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1Rowvdsl2LineConfProfEntrynot-accessiblecurrentThe table vdsl2LineConfProfTable contains VDSL2 line profile configuration. The index of this entry is vdsl2LConfProfProfileName. A default profile with an ind…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.1Columnvdsl2LConfProfProfileNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.2Columnvdsl2LConfProfScMaskDsread-createcurrentSub-carriers mask. A bitmap of 512 bits that allows masking up to 512 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.3Columnvdsl2LConfProfScMaskUsread-createcurrentSub-carriers mask. A bitmap of 64 bits that allows masking up to 64 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1',…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.4Columnvdsl2LConfProfRfiBandsread-createcurrentThe subset of PSD mask breakpoints that shall be used to notch an RFI band. It is a string of bands consist of begin tone index and end tone index. for example…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.5Columnvdsl2LConfProfVDSLtoneblackoutread-createcurrentThe subset of subcarriermask that shall be used to mask the subcarriers. It is a string of bands consist of begin tone index and end tone index. for example :0…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.6Columnvdsl2LConfProfRaModeDsread-createcurrentThe mode of operation of a rate-adaptive xTU-C in the transmit direction. Options: 1. manual(1) - No Rate-Adaptation. The initialization process attempts to sy…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.7Columnvdsl2LConfProfRaModeUsread-createcurrentThe mode of operation of a rate-adaptive xTU-R in the transmit direction. Options: 1. manual(1) - No Rate-Adaptation. The initialization process attempts to sy…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.8Columnvdsl2LConfProfRaUsNrmDsread-createcurrentThe Downstream Up-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream noise margin is above this value and s…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.9Columnvdsl2LConfProfRaUsNrmUsread-createcurrentThe Upstream Up-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream noise margin is above this value and stays…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.10Columnvdsl2LConfProfRaUsTimeDsread-createcurrentThe Downstream Up-Shift Time Interval, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of time that the downstream noise margin should …
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.11Columnvdsl2LConfProfRaUsTimeUsread-createcurrentThe Upstream Up-Shift Time Interval, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay abov…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.12Columnvdsl2LConfProfRaDsNrmsDsread-createcurrentThe Downstream Down-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream noise margin is below this value and…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.13Columnvdsl2LConfProfRaDsNrmsUsread-createcurrentThe Upstream Downshift Noise Margin value, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream noise margin is below this value and stay…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.14Columnvdsl2LConfProfRaDsTimeDsread-createcurrentThe Downstream Downshift Time Interval, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of time the downstream noise margin should stay…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.15Columnvdsl2LConfProfRaDsTimeUsread-createcurrentThe Upstream Down-Shift Time Interval, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay be…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.16Columnvdsl2LConfProfTargetSnrmDsread-createcurrentThe minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.17Columnvdsl2LConfProfTargetSnrmUsread-createcurrentThe minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete i…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.18Columnvdsl2LConfProfMaxSnrmDsread-createcurrentThe maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xT…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.19Columnvdsl2LConfProfMaxSnrmUsread-createcurrentThe maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xT…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.20Columnvdsl2LConfProfMinSnrmDsread-createcurrentThe minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.21Columnvdsl2LConfProfMinSnrmUsread-createcurrentThe minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.22Columnvdsl2LConfProfMsgMinUsread-createcurrentMinimum Overhead Rate Upstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in upstream direction. Expressed in …
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.23Columnvdsl2LConfProfMsgMinDsread-createcurrentMinimum Overhead Rate Downstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in downstream direction. Expressed…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.24Columnvdsl2LConfProfXtuTransSysEnaread-createcurrentxTU Transmission System Enabling (XTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more b…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.25Columnvdsl2LConfProfPmModeread-createcurrentPower management state Enabling. Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. Options: 1. allowTransitionsToIdle (0…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.26Columnvdsl2LConfProfL0Timeread-createcurrentThis minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.27Columnvdsl2LConfProfL2Timeread-createcurrentThis minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 St…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.28Columnvdsl2LConfProfL2Atprread-createcurrentThe maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state. It…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.29Columnvdsl2LConfProfL2Atprtread-createcurrentThe total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at tr…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.30Columnvdsl2LConfProfDpboEpsdread-createcurrentThis parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number o…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.31Columnvdsl2LConfProfDpboEselread-createcurrentThis configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.32Columnvdsl2LConfProfDpboEscmread-createcurrentThis configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.33Columnvdsl2LConfProfDpboMusread-createcurrentDPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shal…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.34Columnvdsl2LConfProfDpboFminread-createcurrentDPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multip…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.35Columnvdsl2LConfProfDpboFmaxread-createcurrentDPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.36Columnvdsl2LConfProfUpboPsdBandread-createcurrentThis parameter defines the UPBO reference PSD used to compute the upstream power back-off for each upstream band except US0. A UPBOPSD defined for each band sh…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.37Columnvdsl2LConfProfUpboKlread-createcurrentThis parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.38Columnvdsl2LConfProfUpboKlfread-createcurrentThis parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the f…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.39Columnvdsl2LConfProfRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65534Columnvdsl2LConfProfReferenceClockread-createcurrentThis object configures the clock reference for the ATU-C in a VDSL Line.
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65535Columnvdsl2LConfProfBitSwapDsread-createcurrentEnables or disables the bit swap downstream of a line.
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65536Columnvdsl2LConfProfBitSwapUsread-createcurrentEnables or disables the bit swap upstream of a line.
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65537Columnvdsl2LConfProfUpboBoostModeread-createcurrentOptions: 1. disable(1) - The Equalized FEXT UPBO method is not supported 2. enable(2) - The Equalized FEXT UPBO method is supported
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65538Columnvdsl2LConfProfDpboEselMinread-createcurrentDPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and VDSL2 provision of additional K…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65539Columnvdsl2LConfProfUpboKl0RefBandread-createcurrentOctets 0+1 - length[1] Octets 2+3 - length[2] Octets 4+5 - length[3] Octets 6+7 - length[4]
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65540Columnvdsl2LConfProfSosTimeDsread-createcurrentThe parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are …
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65541Columnvdsl2LConfProfSosTimeUsread-createcurrentThe parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are …
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65542Columnvdsl2LConfProfSosNtonesDsread-createcurrentThis parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the …
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65543Columnvdsl2LConfProfSosNtonesUsread-createcurrentThis parameter is defined as the minimum percentage of tones in the upstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the st…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65544Columnvdsl2LConfProfSosCrcDsread-createcurrentThis parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the sta…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65545Columnvdsl2LConfProfSosCrcUsread-createcurrentThis parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the sta…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65546Columnvdsl2LConfProfMaxSosDsread-createcurrentThis parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the downstream direction performed within a 120-second interval …
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65547Columnvdsl2LConfProfMaxSosUsread-createcurrentThis parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the upstream direction performed within a 120-second interval ex…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65548Columnvdsl2LConfProfSnrmoffsetRocDsread-createcurrentThe parameter is defined as the SNR Margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the Channel In…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65549Columnvdsl2LConfProfSnrmoffsetRocUsread-createcurrentThe parameter is defined as the SNR Margin offset for the ROC channel in the upstream direction. The parameter is used in the specification of the Channel Init…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65550Columnvdsl2LConfProfInpminRocDsread-createcurrentThis parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an intege…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65551Columnvdsl2LConfProfInpminRocUsread-createcurrentThis parameter contains the minimum impulse noise protection to apply on the robust ROC in the upstream direction. The minimum impulse noise protection is an i…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65552Columnvdsl2LConfProfInmIatoDsread-createcurrentThe parameter of downstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determ…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65553Columnvdsl2LConfProfInmIatsDsread-createcurrentThe parameter of downstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine …
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65554Columnvdsl2LConfProfInmCcDsread-createcurrentThe parameter of Downstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the …
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65555Columnvdsl2LConfProfInmInpeqModeDsread-createcurrentThe parameter of Downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65556Columnvdsl2LConfProfInmIatoUsread-createcurrentThe parameter of upstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determin…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65557Columnvdsl2LConfProfInmIatsUsread-createcurrentThe parameter of upstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine in…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65558Columnvdsl2LConfProfInmCcUsread-createcurrentThe parameter of upstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the cl…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65559Columnvdsl2LConfProfInmInpeqModeUsread-createcurrentThe parameter of upstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use i…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65560Columnvdsl2LConfProfL3Timeread-createcurrentThis minimum time (in seconds) between an Entry into the L3 state and the L0 or L2 state. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65561Columnvdsl2LConfProfRtxModeDsread-createcurrentThe mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65562Columnvdsl2LConfProfRtxModeUsread-createcurrentThe mode of operation of G.998.4 retransmission in upstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65563Columnvdsl2LConfProfLeftrThreshDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fracti…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65564Columnvdsl2LConfProfLeftrThreshUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65565Columnvdsl2LConfProfForceInpDsread-createcurrentThis parameter indicates that the framer settings of the bearer shall be selected such that the impulse noise protection computed according to the formula spec…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65566Columnvdsl2LConfProfForceInpUsread-createcurrentThis parameter indicates that the framer settings of the bearer shall be selected such that the impulse noise protection computed according to the formula spec…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65567Columnvdsl2LConfProfAeleModeread-createcurrentThis parameter defines the UPBO electrical length estimation mode to be used in the Alternative Electrical Length Estimation method (ELE-M1) in 7.2.1.3.2.2/G.9…
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65568Columnvdsl2LConfProfUpboElmtread-createcurrentThis parameter defines the UPBO electrical length minimum threshold percentile in percent used in the Alternative Electrical Length Estimation method (ELE-M1) …
1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65569Columnvdsl2LconfProfUpboKlAutoread-createcurrentThis parameter defines the mode in which kl0 is computed when vdsl2LconfProfUpboKlf is auto. Options: 1 2 3 4 4294967295
1.3.6.1.4.1.2011.6.115.1.5.1.3Tablevdsl2LineConfProfModeSpecTablenot-accessiblecurrentThe table vdsl2LineConfProfModeSpecTable extends the VDSL2 line configuration profile by VDSL Mode Specific parameters. A row in this table that has an index o…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1Rowvdsl2LineConfProfModeSpecEntrynot-accessiblecurrentThe table vdsl2LineConfProfModeSpecTable extends the VDSL2 line configuration profile by VDSL Mode Specific parameters. A row in this table that has an index o…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.1Columnvdsl2LconfProfVdslModenot-accessiblecurrentThe VDSL Mode is a way of categorizing the various VDSL transmission modes into groups, each group (VDSL Mode) shares the same PSD configuration. There should …
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.2Columnvdsl2LConfProfMaxNomPsdDsread-createcurrentThe maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical val…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.3Columnvdsl2LConfProfMaxNomPsdUsread-createcurrentThe maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical value…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.4Columnvdsl2LConfProfMaxNomAtpDsread-createcurrentThe maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.5Columnvdsl2LConfProfMaxNomAtpUsread-createcurrentThe maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical v…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.6Columnvdsl2LConfProfMaxAggRxPwrUsread-createcurrentThe maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is such that this m…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.7Columnvdsl2LConfProfPsdMaskDsread-createcurrentThis configuration parameter defines the downstream PSD mask applicable at the U C2 reference point. This MIB PSD mask may impose PSD restrictions in addition …
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.8Columnvdsl2LConfProfPsdMaskUsread-createcurrentThis configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.9Columnvdsl2LConfProfPsdMaskSelectUsread-createcurrentThe selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.10Columnvdsl2LConfProfPSDClassMaskread-createcurrentIn order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: - Class 998 Annex A: D-32, D-6…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.11Columnvdsl2LConfProfProfilesread-createcurrentThis configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line.
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.12Columnvdsl2LConfProfBandOptUsageread-createcurrentDefines the VDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). Options: 1. unused(1) - indicates Opt is unused 2. used(2) - indicates Opt us…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.13Columnvdsl2LConfProfModeSpecRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65535ColumnhwVdsl2ConfProfVirtualNoiseModeDsread-createcurrentThis parameter enables the transmitter referred virtual noise in the downstream direction. If set to 1, the virtual noise is disabled. If set to 2, the virtual…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65536ColumnhwVdsl2ConfProfVirtualNoiseModeUsread-createcurrentThis parameter enables the transmitter referred virtual noise in the upstream direction. If set to 1, the virtual noise is disabled. If set to 2, the virtual n…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65537ColumnhwVdsl2ConfProfVirtualNoiseDsread-createcurrentThis configuration parameter defines the downstream transmitter referred virtual noise (TXREFVNds). The TXREFVNds shall be specified through a set of breakpoin…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65538ColumnhwVdsl2ConfProfVirtualNoiseUsread-createcurrentThis configuration parameter defines the upstream transmitter referred virtual noise (TXREFVNus). The TXREFVNus shall be specified through a set of breakpoints…
1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65539ColumnhwVdsl2ConfProfAutoProfileread-createcurrentEnable or disable the G.993.2 profiles adaptive function. If set to 1, the G.993.2 profiles adaptive function is disabled. If set to 2, the G.993.2 profiles ad…
1.3.6.1.4.1.2011.6.115.1.5.2Nodevdsl2ProfileChannel
1.3.6.1.4.1.2011.6.115.1.5.2.1Tablevdsl2ChConfProfileTablenot-accessiblecurrentThe table vdsl2ChConfProfileTable contains VDSL2 channel profile configuration. The index of this table is vdsl2ChConfProfProfileName. A default profile with a…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1Rowvdsl2ChConfProfileEntrynot-accessiblecurrentThe table vdsl2ChConfProfileTable contains VDSL2 channel profile configuration. The index of this entry is vdsl2ChConfProfProfileName. A default profile with a…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.1Columnvdsl2ChConfProfProfileNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.2Columnvdsl2ChConfProfMinDataRateDsread-createcurrentIf retransmission is not used in downstream direction,this parameter specifics minimum data rate for the bearer channel on downstream direction. The rate is co…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.3Columnvdsl2ChConfProfMinDataRateUsread-createcurrentIf retransmission is not used in upstream direction,this parameter specifics minimum data rate for the bearer channel on upstream direction. The rate is coded …
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.4Columnvdsl2ChConfProfMinResDataRateDsread-createcurrentMinimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if t…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.5Columnvdsl2ChConfProfMinResDataRateUsread-createcurrentMinimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.6Columnvdsl2ChConfProfMaxDataRateDsread-createcurrentIf retransmission is not used in downstream direction,this parameter specifics maximum data rate for the bearer channel on downstream direction. The rate is co…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.7Columnvdsl2ChConfProfMaxDataRateUsread-createcurrentIf retransmission is not used in upstream direction,this parameter specifics maximum data rate for the bearer channel on upstream direction. The rate is coded …
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.8Columnvdsl2ChConfProfMinDataRateLowPwrDsread-createcurrentMinimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 …
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.9Columnvdsl2ChConfProfMinDataRateLowPwrUsread-createcurrentMinimum Data Rate in Low Power state on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 in…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.10Columnvdsl2ChConfProfMaxDelayDsread-createcurrentIf retransmission is not used in downstream direction,this parameter is maximum interleave delay on downstream direction. The maximum one-way interleaving dela…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.11Columnvdsl2ChConfProfMaxDelayUsread-createcurrentIf retransmission is not used in upstream direction,this parameter is maximum interleave delay on upstream direction. The maximum one-way interleaving delay in…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.12Columnvdsl2ChConfProfMinProtectionDsread-createcurrentIf retransmission is not used in downstream direction,this parameter is minimum impulse noise protection for the bearer channel on downstream direction. The mi…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.13Columnvdsl2ChConfProfMinProtectionUsread-createcurrentIf retransmission is not used in upstream direction,this parameter is minimum impulse noise protection for the bearer channel on upstream direction. The minimu…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.14Columnvdsl2ChConfProfMaxBerDsread-createcurrentMaximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.15Columnvdsl2ChConfProfMaxBerUsread-createcurrentMaximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 …
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.16Columnvdsl2ChConfProfUsDataRateDsread-createcurrentIf retransmission is not used in downstream direction,this parameter is data rate threshold upshift for downstream direction. An 'Up-shift rate change' event i…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.17Columnvdsl2ChConfProfDsDataRateDsread-createcurrentIf retransmission is not used in downstream direction,this parameter is data rate threshold downshift for downstream direction. A 'Down-shift rate change' even…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.18Columnvdsl2ChConfProfUsDataRateUsread-createcurrentIf retransmission is not used in upstream direction,this parameter is data rate threshold up shift for upstream direction. An 'Up-shift rate change' event is t…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.19Columnvdsl2ChConfProfDsDataRateUsread-createcurrentIf retransmission is not used in upstream direction,this parameter is data rate threshold downshift for upstream direction. A 'Down-shift rate change' event is…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.20Columnvdsl2ChConfProfImaEnabledread-createcurrentIMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is of ATM Data Path. When in 'enable' state, t…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.21Columnvdsl2ChConfProfDataPathModeread-createcurrentThe channel data path mode. Options: 1. atm(1) - ATM 2. ptm(2) - PTM 3. both(3) - ATM and PTM Huawei defined.
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.22Columnvdsl2ChConfProfRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.23Columnvdsl2ChConfProfPhyRcontrolDsread-createcurrentTo enable or disable the retransmission function.
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.24Columnvdsl2ChConfProfPhyRcontrolUsread-createcurrentTo enable or disable the retransmission function.
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.25Columnvdsl2ChConfProfInpMaxDsread-createcurrentMaximum Impulse Noise Protection on downstream direction.
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.26Columnvdsl2ChConfProfInpMaxUsread-createcurrentMaximum Impulse Noise Protection on upstream direction.
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.27Columnvdsl2ChConfProfMinRtxRatioDsread-createcurrentThis object is used to config the minimum retransmission band width parameter downstream.
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.28Columnvdsl2ChConfProfMinRtxRatioUsread-createcurrentThis object is used to config the minimum retransmission band width parameter upstream.
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.29Columnvdsl2ChConfProfMinRSoverheadDsread-createcurrentThis object is used to config the minimum RSoverhead parameter downstream..
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.30Columnvdsl2ChConfProfMinRSoverheadUsread-createcurrentThis object is used to config the minimum RSoverhead parameter upstream..
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.31Columnvdsl2ChConfProfErasureDecodingread-createcurrentTo enable or disable the erasure decoding of a channel. Options: 1. enable(1) 2. disable(2)
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.32Columnvdsl2ChConfProfMinSosBrDsread-createcurrentThis parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The valid range of values is from 0 to 524280K…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.33Columnvdsl2ChConfProfMinSosBrUsread-createcurrentThis parameter specifies the minimum net data rate required for a valid SOS request in the upstream direction.The valid range of values is from 0 to 524280Kbps…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.34Columnvdsl2ChConfProfMinEtrRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.35Columnvdsl2ChConfProfMinEtrRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.36Columnvdsl2ChConfProfMaxEtrRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.37Columnvdsl2ChConfProfMaxEtrRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of 1…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.38Columnvdsl2ChConfProfMaxNdrRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.39Columnvdsl2ChConfProfMaxNdrRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the maximum net data rate for the bearer channel.The values range in steps of 1000 bi…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.40Columnvdsl2ChConfProfMaxDelayRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (s…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.41Columnvdsl2ChConfProfMaxDelayRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.42Columnvdsl2ChConfProfMinDelayRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (s…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.43Columnvdsl2ChConfProfMinDelayRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.44Columnvdsl2ChConfProfMinInpShineRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is …
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.45Columnvdsl2ChConfProfMinInpShineRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.46Columnvdsl2ChConfProfMinInp8ShineRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is …
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.47Columnvdsl2ChConfProfMinInp8ShineRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.48Columnvdsl2ChConfProfShineRatioRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.49Columnvdsl2ChConfProfShineRatioRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 i…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.50Columnvdsl2ChConfProfMinInpReinRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.51Columnvdsl2ChConfProfMinInpReinRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.52Columnvdsl2ChConfProfMinInp8ReinRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.53Columnvdsl2ChConfProfMinInp8ReinRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.54Columnvdsl2ChConfProfIatReinRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequ…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.55Columnvdsl2ChConfProfIatReinRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequen…
1.3.6.1.4.1.2011.6.115.1.5.2.1.1.56Columnvdsl2ChConfProfInitPolicyread-createcurrentThis parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initialization. The valid values for CIPOLICY a…
1.3.6.1.4.1.2011.6.115.1.5.3Nodevdsl2ProfileAlarmConf
1.3.6.1.4.1.2011.6.115.1.5.3.1Tablevdsl2LineAlarmConfTemplateTablenot-accessiblecurrentThe table vdsl2LineAlarmConfTemplateTable contains VDSL2 line alarm configuration template. The index of this table is vdsl2LAlarmConfTempTemplateName. A defau…
1.3.6.1.4.1.2011.6.115.1.5.3.1.1Rowvdsl2LineAlarmConfTemplateEntrynot-accessiblecurrentThe table vdsl2LineAlarmConfTemplateTable contains VDSL2 line alarm configuration template. The index of this entry is vdsl2LAlarmConfTempTemplateName. A defau…
1.3.6.1.4.1.2011.6.115.1.5.3.1.1.1Columnvdsl2LAlarmConfTempTemplateNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.3.1.1.2Columnvdsl2LAlarmConfTempLineProfileread-createcurrentThe value of this object identifies the row in the VDSL2 Line Thresholds Configuration Profile Table (vdsl2LineAlarmConfProfileTable) that applies to this VDSL…
1.3.6.1.4.1.2011.6.115.1.5.3.1.1.3Columnvdsl2LAlarmConfTempChan1ConfProfileread-createcurrentThe value of this object identifies the row in the VDSL2 Channel Thresholds Configuration Profile Table (vdsl2ChAlarmConfProfileTable) that applies for VDSL2 b…
1.3.6.1.4.1.2011.6.115.1.5.3.1.1.4Columnvdsl2LAlarmConfTempChan2ConfProfileread-createcurrentThe value of this object identifies the row in the VDSL2 Channel Thresholds Configuration Profile Table (vdsl2ChAlarmConfProfileTable) that applies for VDSL2 b…
1.3.6.1.4.1.2011.6.115.1.5.3.1.1.5Columnvdsl2LAlarmConfTempChan3ConfProfileread-createcurrentThe value of this object identifies the row in the VDSL2 Channel Thresholds Configuration Profile Table (vdsl2ChAlarmConfProfileTable) that applies for VDSL2 b…
1.3.6.1.4.1.2011.6.115.1.5.3.1.1.6Columnvdsl2LAlarmConfTempChan4ConfProfileread-createcurrentThe value of this object identifies the row in the VDSL2 Channel Thresholds Configuration Profile Table (vdsl2ChAlarmConfProfileTable) that applies for VDSL2 b…
1.3.6.1.4.1.2011.6.115.1.5.3.1.1.7Columnvdsl2LAlarmConfTempRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.3.2Tablevdsl2LineAlarmConfProfileTablenot-accessiblecurrentThe table vdsl2LineAlarmConfProfileTable contains VDSL2 line PM thresholds profiles. The index of this table is vdsl2LineAlarmConfProfileName. A default profil…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1Rowvdsl2LineAlarmConfProfileEntrynot-accessiblecurrentThe table vdsl2LineAlarmConfProfileTable contains VDSL2 line PM thresholds profiles. The index of this entry is vdsl2LineAlarmConfProfileName. A default profil…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.1Columnvdsl2LineAlarmConfProfileNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.2Columnvdsl2LineAlarmConfProfileXtucThresh15MinFecsread-createcurrentA threshold for the vdsl2PMLCurr15MFecs counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.3Columnvdsl2LineAlarmConfProfileXtucThresh15MinEsread-createcurrentA threshold for the vdsl2PMLCurr15MEs counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter. …
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.4Columnvdsl2LineAlarmConfProfileXtucThresh15MinSesread-createcurrentA threshold for the vdsl2PMLCurr15MSes counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter.…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.5Columnvdsl2LineAlarmConfProfileXtucThresh15MinLossread-createcurrentA threshold for the vdsl2PMLCurr15MLoss counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.6Columnvdsl2LineAlarmConfProfileXtucThresh15MinUasread-createcurrentA threshold for the vdsl2PMLCurr15MUas counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter.…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.7Columnvdsl2LineAlarmConfProfileXturThresh15MinFecsread-createcurrentA threshold for the vdsl2PMLCurr15MFecs counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.8Columnvdsl2LineAlarmConfProfileXturThresh15MinEsread-createcurrentA threshold for the vdsl2PMLCurr15MEs counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter. …
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.9Columnvdsl2LineAlarmConfProfileXturThresh15MinSesread-createcurrentA threshold for the vdsl2PMLCurr15MSes counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter.…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.10Columnvdsl2LineAlarmConfProfileXturThresh15MinLossread-createcurrentA threshold for the vdsl2PMLCurr15MLoss counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.11Columnvdsl2LineAlarmConfProfileXturThresh15MinUasread-createcurrentA threshold for the vdsl2PMLCurr15MUas counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter.…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.12Columnvdsl2LineAlarmConfProfileThresh15MinFailedFullIntread-createcurrentA threshold for the vdsl2PMLCurrInit15MfailedFullInits counter. The value 0 means that no threshold is specified for the associated counter.
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.13Columnvdsl2LineAlarmConfProfileThresh15MinFailedShrtIntread-createcurrentA threshold for the vdsl2PMLCurrInit15MFailedShortInits counter. The value 0 means that no threshold is specified for the associated counter.
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.14Columnvdsl2LineAlarmConfProfileRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.15Columnvdsl2LineAlarmConfProfileThresh15MinFullIntread-createcurrentA threshold for the vdsl2PMLCurrInit15MFullInits counter. The value 0 means that no threshold is specified for the associated counter.
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.16Columnvdsl2LineAlarmConfProfileXtucThresh15MinLeftrsread-createcurrentA threshold for the vdsl2PMLCurr15MLeftrs counter, when vdsl2PMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated count…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.17Columnvdsl2LineAlarmConfProfileXturThresh15MinLeftrsread-createcurrentA threshold for the vdsl2PMLCurr15MLeftrs counter, when vdsl2PMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated count…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.18ColumnhwVdsl2LineAlarmConfProfileDyingGaspAlarmSwitchread-createcurrentThis object enable/disable the report of LOSS-OF-POWER alarm in a VDSL line. Options: 1. enable(1) - The report of LOSS-OF-POWER alarm in a VDSL line is enable…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.19ColumnhwVdsl2LineAlarmConfProfileActiveFailAlarmSwitchread-createcurrentThis object enable/disable the active fail alarm switch. Options: 1. enable(1) - The active fail alarm switch is enabled 2. disable(2) - The active fail alarm …
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.20ColumnhwVdsl2LineAlarmConfProfileRateChangeAlarmSwitchread-createcurrentThis object enable/disable the active rate change alarm switch. Options: 1. enable(1) - The active rate change alarm switch is enabled 2. disable(2) - The acti…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.21ColumnhwVdsl2LineAlarmConfProfileLegacyCpeAlarmSwitchread-createcurrentThis object enable/disable the legacy cpe alarm switch. Options: 1. enable(1) - The legacy cpe alarm switch is enabled 2. disable(2) - The legacy cpe alarm swi…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.22ColumnhwVdsl2LineAlarmConfProfileVictAbnormalVariationAlarmSwitchread-createcurrentThis object enable/disable alarm switch that the port receives abnormal crosstalk. Options: 1. enable(1) - The alarm switch that the port receives abnormal cro…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.23ColumnhwVdsl2LineAlarmConfProfileDistAbnormalVariationAlarmSwitchread-createcurrentThis object enable/disable the alarm switch that the port causes abnormal crosstalk. Options: 1. enable(1) - The alarm switch that the port causes abnormal cro…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.24ColumnhwVdsl2LineAlarmConfProfileReceivedESAbnormalAlarmSwitchread-createcurrentThis object enable/disable the alarm switch that The port receives abnormal error sample messages. Options: 1. enable(1) - The alarm switch that the port recei…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.25ColumnhwVdsl2LineAlarmConfProfileNonVectoringCPEActivatedAlarmSwitchread-createcurrentThis object enable/disable the alarm switch that the port is activated in none-vectoring mode. Options: 1. enable(1) - The alarm switch that the port is activa…
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.26ColumnhwVdsl2LineAlarmConfProfileFreqRetrainReachThresholdAlarmSwitchread-createcurrentThis object enable/disable the alarm switch that the port frequently retrain times in 15 minutes reach the threshold. Options: 1. enable(1) - The alarm switch …
1.3.6.1.4.1.2011.6.115.1.5.3.2.1.27Columnhwvdsl2LineAlarmConfProfilePSConfigAbnormalAlarmSwitchread-createcurrentThis object enable/disable the pilot sequence configuration abnormal alarm switch. Options: 1. enable(1) - The pilot sequence configuration abnormal alarm swit…
1.3.6.1.4.1.2011.6.115.1.5.3.3Tablevdsl2ChAlarmConfProfileTablenot-accessiblecurrentThe table vdsl2ChAlarmConfProfileTable contains VDSL2 channel PM thresholds profiles. The index of this table is vdsl2ChAlarmConfProfileName. A default profile…
1.3.6.1.4.1.2011.6.115.1.5.3.3.1Rowvdsl2ChAlarmConfProfileEntrynot-accessiblecurrentThe table vdsl2ChAlarmConfProfileTable contains VDSL2 channel PM thresholds profiles. The index of this entry is vdsl2ChAlarmConfProfileName. A default profile…
1.3.6.1.4.1.2011.6.115.1.5.3.3.1.1Columnvdsl2ChAlarmConfProfileNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.3.3.1.2Columnvdsl2ChAlarmConfProfileXtucThresh15MinCodingViolationsread-createcurrentA threshold for the vdsl2PMChCurr15MCodingViolations counter, when vdsl2PMChCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the asso…
1.3.6.1.4.1.2011.6.115.1.5.3.3.1.3Columnvdsl2ChAlarmConfProfileXtucThresh15MinCorrectedread-createcurrentA threshold for the vdsl2PMChCurr15MCorrectedBlocks counter, when vdsl2PMChCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the assoc…
1.3.6.1.4.1.2011.6.115.1.5.3.3.1.4Columnvdsl2ChAlarmConfProfileXturThresh15MinCodingViolationsread-createcurrentA threshold for the vdsl2PMChCurr15MCodingViolations counter, when vdsl2PMChCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the asso…
1.3.6.1.4.1.2011.6.115.1.5.3.3.1.5Columnvdsl2ChAlarmConfProfileXturThresh15MinCorrectedread-createcurrentA threshold for the vdsl2PMChCurr15MCorrectedBlocks counter, when vdsl2PMChCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the assoc…
1.3.6.1.4.1.2011.6.115.1.5.3.3.1.6Columnvdsl2ChAlarmConfProfileMonitoringRateDsread-createcurrentThe channel monitoring rate downstream. Huawei defined. When the value you set is larger than the value of the rate downstream defined in the channel profile, …
1.3.6.1.4.1.2011.6.115.1.5.3.3.1.7Columnvdsl2ChAlarmConfProfileMonitoringRateUsread-createcurrentThe channel monitoring rate upstream. Huawei defined. When the value you set is larger than the value of the rate upstream defined in the channel profile, it w…
1.3.6.1.4.1.2011.6.115.1.5.3.3.1.8Columnvdsl2ChAlarmConfProfileRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.4Nodevdsl2ProfileTIMode
1.3.6.1.4.1.2011.6.115.1.5.4.1Tablevdsl2ServProfTablenot-accessiblecurrentThe table vdsl2ServProfTable contains xDSL line service configuration. The index of this table is vdsl2ServProfName. A default profile with an index of 'DEFVAL…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1Rowvdsl2ServProfEntrynot-accessiblecurrentThe table vdsl2ServProfTable contains xDSL line service configuration. The index of this entry is vdsl2ServProfName. A default profile with an index of 'DEFVAL…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.1Columnvdsl2ServProfNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.2Columnvdsl2ServProfDataPathModeread-createcurrentThis parameter indicates the VDSL2 line data path modes. Options: 1. atm (1) - atm mode 2. ptm (2) - ptm mode
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.3Columnvdsl2ServProfBitSwapEnablingDsread-createcurrentEnables or disables the bit swap downstream of a line. Options: 1. enable(1) - Enable the bit swap downstream of a line 2. disable(2) - Disable the bit swap do…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.4Columnvdsl2ServProfBitSwapEnablingUsread-createcurrentEnables or disables the bit swap upstream of a line. Options: 1. enable(1) - Enable the bit swap upstream of a line. 2. disable(2) - Disable the bit swap upstr…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.5Columnvdsl2ServProfRaModeread-createcurrentThe mode of operation of a rate-adaptive xTU-R in the transmit direction. Options: 1. manual (1) - No Rate-Adaptation. The initialization process attempts to s…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.6Columnvdsl2ServProfCh1Enablingread-createcurrentThis parameter indicates whether the bearer 1 of VDSL2 line is enabling. Options: 1. enable(1) - Enable the bearer 1 of VDSL2 line. 2. disable(2) - Disable the…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.7Columnvdsl2ServProfCh1MinDataRateDsread-createcurrentIf retransmission is not used in downstream direction,this parameter specifics minimum data rate for the bearer channel on downstream direction. coded in bit/s…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.8Columnvdsl2ServProfCh1MinDataRateUsread-createcurrentIf retransmission is not used in upstream direction,this parameter specifics minimum data rate for the bearer channel on upstream direction. coded in bit/s. Un…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.9Columnvdsl2ServProfCh1MinResDataRateDsread-createcurrentMinimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if t…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.10Columnvdsl2ServProfCh1MinResDataRateUsread-createcurrentMinimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.11Columnvdsl2ServProfCh1MaxDataRateDsread-createcurrentIf retransmission is not used in downstream direction,this parameter specifics maximum data rate for the bearer channel on downstream direction. coded in bit/s…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.12Columnvdsl2ServProfCh1MaxDataRateUsread-createcurrentIf retransmission is not used in upstream direction,this parameter specifics maximum data rate for the bearer channel on upstream direction. coded in bit/s. Un…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.13Columnvdsl2ServProfCh1MinDataRateLowPwrDsread-createcurrentMinimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s., during the low power state (L1…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.14Columnvdsl2ServProfCh1MinDataRateLowPwrUsread-createcurrentMinimum Data Rate in Low Power state on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 in…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.15Columnvdsl2ServProfCh1RaRatioDsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Downstream. The ratio re…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.16Columnvdsl2ServProfCh1RaRatioUsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Upstream. The ratio refe…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.17Columnvdsl2ServProfCh2Enablingread-createcurrentThis parameter indicates whether the bearer 2 of VDSL2 line is enabling. Options: 1. enable(1) - Enable the bearer 2 of VDSL2 line. 2. disable(2) - Disable the…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.18Columnvdsl2ServProfCh2MinDataRateDsread-createcurrentMinimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s. Unit: bits/second
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.19Columnvdsl2ServProfCh2MinDataRateUsread-createcurrentMinimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s. Unit: bits/second
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.20Columnvdsl2ServProfCh2MinResDataRateDsread-createcurrentMinimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if t…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.21Columnvdsl2ServProfCh2MinResDataRateUsread-createcurrentMinimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.22Columnvdsl2ServProfCh2MaxDataRateDsread-createcurrentMaximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bit/s. Unit: bits/second
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.23Columnvdsl2ServProfCh2MaxDataRateUsread-createcurrentMaximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bit/s. Unit: bits/second
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.24Columnvdsl2ServProfCh2MinDataRateLowPwrDsread-createcurrentMinimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 …
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.25Columnvdsl2ServProfCh2MinDataRateLowPwrUsread-createcurrentMinimum Data Rate in Low Power state on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 in…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.26Columnvdsl2ServProfCh2RaRatioDsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Downstream. The ratio re…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.27Columnvdsl2ServProfCh2RaRatioUsread-createcurrentRate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Upstream. The ratio refe…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.28Columnvdsl2ServProfRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.29Columnhwvdsl2ServProfMinEtrRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.30Columnhwvdsl2ServProfMinEtrRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.31Columnhwvdsl2ServProfMaxEtrRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.32Columnhwvdsl2ServProfMaxEtrRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of 1…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.33Columnhwvdsl2ServProfMaxNdrRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000…
1.3.6.1.4.1.2011.6.115.1.5.4.1.1.34Columnhwvdsl2ServProfMaxNdrRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the maximum net data rate for the bearer channel.The values range in steps of 1000 bi…
1.3.6.1.4.1.2011.6.115.1.5.4.2Tablevdsl2SpectrumProfTablenot-accessiblecurrentThe table vdsl2SpectrumProfTable contains VDSL2 line spectrum configuration. The index of this table is vdsl2SpectrumProfName. A default profile with an index …
1.3.6.1.4.1.2011.6.115.1.5.4.2.1Rowvdsl2SpectrumProfEntrynot-accessiblecurrentThe table vdsl2SpectrumProfTable contains VDSL2 line spectrum configuration. The index of this entry is vdsl2SpectrumProfName. A default profile with an index …
1.3.6.1.4.1.2011.6.115.1.5.4.2.1.1Columnvdsl2SpectrumProfNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.4.2.1.2Columnvdsl2SpectrumProfXtuTransSysEnaread-createcurrentxTU Transmission System Enabling (xTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more b…
1.3.6.1.4.1.2011.6.115.1.5.4.2.1.3Columnvdsl2SpectrumProfScMaskDsread-createcurrentSub-carriers mask. A bitmap of 512 bits that allows masking up to 512 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1…
1.3.6.1.4.1.2011.6.115.1.5.4.2.1.4Columnvdsl2SpectrumProfScMaskUsread-createcurrentSub-carriers mask. A bitmap of 64 bits that allows masking up to 64 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1',…
1.3.6.1.4.1.2011.6.115.1.5.4.2.1.5Columnvdsl2SpectrumProfVDSLtoneblackoutread-createcurrentThe subset of subcarriermask that shall be used to mask the subcarriers. It is a string of bands consist of begin tone index and end tone index. for example :0…
1.3.6.1.4.1.2011.6.115.1.5.4.2.1.6Columnvdsl2SpectrumProfRfiBandsread-createcurrentThe subset of PSD mask breakpoints that shall be used to notch an RFI band. It is a string of bands consist of begin tone index and end tone index. for example…
1.3.6.1.4.1.2011.6.115.1.5.4.2.1.7Columnvdsl2SpectrumProfRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.4.2.1.8Columnhwvdsl2SpectrumProfRtxModeDsread-createcurrentThe mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998…
1.3.6.1.4.1.2011.6.115.1.5.4.2.1.9Columnhwvdsl2SpectrumProfRtxModeUsread-createcurrentThe mode of operation of G.998.4 retransmission in upstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4…
1.3.6.1.4.1.2011.6.115.1.5.4.2.1.10Columnhwvdsl2SpectrumProfProfLeftrThreshDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fracti…
1.3.6.1.4.1.2011.6.115.1.5.4.2.1.11Columnhwvdsl2SpectrumProfProfLeftrThreshUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction…
1.3.6.1.4.1.2011.6.115.1.5.4.3Tablevdsl2SpectrumProfModeSpecTablenot-accessiblecurrentThe table vdsl2SpectrumProfModeSpecTable extends the VDSL2 line configuration profile by VDSL Mode Specific parameters. A row in this table that has an index o…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1Rowvdsl2SpectrumProfModeSpecEntrynot-accessiblecurrentThe table vdsl2SpectrumProfModeSpecTable extends the VDSL2 line configuration profile by VDSL Mode Specific parameters. A row in this table that has an index o…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.1Columnvdsl2SpectrumProfXdslModenot-accessiblecurrentThe xDSL Mode is a way of categorizing the various xDSL transmission modes into groups, each group (xDSL Mode) shares the same PSD configuration. There should …
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.2Columnvdsl2SpectrumProfMaxNomPsdDsread-createcurrentThe maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical val…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.3Columnvdsl2SpectrumProfMaxNomPsdUsread-createcurrentThe maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical value…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.4Columnvdsl2SpectrumProfMaxNomAtpDsread-createcurrentThe maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.5Columnvdsl2SpectrumProfMaxNomAtpUsread-createcurrentThe maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical v…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.6Columnvdsl2SpectrumProfMaxAggRxPwrUsread-createcurrentThe maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is such that this m…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.7Columnvdsl2SpectrumProfPsdMaskDsread-createcurrentThis configuration parameter defines the downstream PSD mask applicable at the U-C2 reference point. This MIB PSD mask may impose PSD restrictions in addition …
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.8Columnvdsl2SpectrumProfPsdMaskUsread-createcurrentThis configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.9Columnvdsl2SpectrumProfUpsPsdMaskSelectionread-createcurrentThis configuration parameter defines which upstream PSD mask is enabled. This parameter is used only for Annexes J and M of ITU T Recs G.992.3 and G.992.5. As …
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.10Columnvdsl2SpectrumProfPmModeread-createcurrentPower management state Enabling. Defines the power states the ATU-C or ATU-R may autonomously transition to on this line. Options: 1. allowTransitionsToIdle (0…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.11Columnvdsl2SpectrumProfL0Timeread-createcurrentThis minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state. It ranges from 0 to 255 seconds. Unit: seconds
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.12Columnvdsl2SpectrumProfL2Timeread-createcurrentThis minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 St…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.13Columnvdsl2SpectrumProfL2Atprread-createcurrentThe maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state. Un…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.14Columnvdsl2SpectrumProfL2Atprtread-createcurrentThe total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at tr…
1.3.6.1.4.1.2011.6.115.1.5.4.3.1.15Columnvdsl2SpectrumProfModeSpecRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.4.4Tablevdsl2SpectrumProfSubProfTablenot-accessiblecurrentThe table vdsl2SpectrumProfSubProfTable extends the VDSL2 line configuration profile by profile parameters. The indexes of this table are vdsl2SpectrumProfName…
1.3.6.1.4.1.2011.6.115.1.5.4.4.1Rowvdsl2SpectrumProfSubProfEntrynot-accessiblecurrentThe table vdsl2SpectrumProfSubProfTable extends the VDSL2 line configuration profile by profile parameters. The indexes of this entry are vdsl2SpectrumProfName…
1.3.6.1.4.1.2011.6.115.1.5.4.4.1.1Columnvdsl2SpectrumProfSubProfilesnot-accessiblecurrentThis configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. This object is defaulted Profile17a.
1.3.6.1.4.1.2011.6.115.1.5.4.4.1.2Columnvdsl2SpectrumProfSubProfilesWeightread-createcurrentThis configuration parameter contains the G.993.2 profiles' weight to be allowed by the near-end xTU on this line. This object is defaulted priorityWeight1.
1.3.6.1.4.1.2011.6.115.1.5.4.4.1.3Columnvdsl2SpectrumProfPsdClassMaskread-createcurrent(CLASSMASK). In order to reduce the number of configuration possibilities, the limit Power Spectral Density masks (see LIMITMASK) are grouped in PSD mask class…
1.3.6.1.4.1.2011.6.115.1.5.4.4.1.4Columnvdsl2SpectrumProfPsdLimitMaskread-createcurrent(LIMITMASK). This configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class, enabled by the near-end xTU on this line for eac…
1.3.6.1.4.1.2011.6.115.1.5.4.4.1.5Columnvdsl2SpectrumProfUs0PsdMaskread-createcurrentThis parameter contains the US0 PSD masks to be allowed by the near-end xTU on the line. This parameter is only defined for G.993.2 Annex A. It is represented …
1.3.6.1.4.1.2011.6.115.1.5.4.4.1.6Columnvdsl2SpectrumProfUs0Disableread-createcurrentThis configuration parameter indicates if the use of US0 is disabled for each limit PSD mask enabled in the LIMITMASK parameter. This object is defaulted Unuse…
1.3.6.1.4.1.2011.6.115.1.5.4.4.1.7Columnvdsl2SpectrumProfSubProfRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.4.5Tablevdsl2DpboProfTablenot-accessiblecurrentThe table vdsl2DpboProfTable contains VDSL2 DPBO configuration. The index of this table is vdsl2DpboProfName. A default profile with an index of 'DEFVAL' will …
1.3.6.1.4.1.2011.6.115.1.5.4.5.1Rowvdsl2DpboProfEntrynot-accessiblecurrentThe table vdsl2DpboProfTable contains VDSL2 DPBO configuration. The index of this entry is vdsl2DpboProfName. A default profile with an index of 'DEFVAL' will …
1.3.6.1.4.1.2011.6.115.1.5.4.5.1.1Columnvdsl2DpboProfNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.4.5.1.2Columnvdsl2DpboProfWkMdMaskread-createcurrentThis configuration parameter defines the current enabled DPBO working mode mask. DPBO working mode enabling:1-ADSL, 2-ADSL2+ 3-VDSL2. Options: 1. current enabl…
1.3.6.1.4.1.2011.6.115.1.5.4.5.1.3Columnvdsl2DpboProfEpsdread-createcurrentThis parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number o…
1.3.6.1.4.1.2011.6.115.1.5.4.5.1.4Columnvdsl2DpboProfEselread-createcurrentThis configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi…
1.3.6.1.4.1.2011.6.115.1.5.4.5.1.5Columnvdsl2DpboProfEscmread-createcurrentThis configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de…
1.3.6.1.4.1.2011.6.115.1.5.4.5.1.6Columnvdsl2DpboProfMusread-createcurrentDPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shal…
1.3.6.1.4.1.2011.6.115.1.5.4.5.1.7Columnvdsl2DpboProfFminread-createcurrentDPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multip…
1.3.6.1.4.1.2011.6.115.1.5.4.5.1.8Columnvdsl2DpboProfFmaxread-createcurrentDPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.…
1.3.6.1.4.1.2011.6.115.1.5.4.5.1.9Columnvdsl2DpboProfRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.4.5.1.65535Columnvdsl2DpboProfEselMinread-createcurrentDPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and VDSL2 provision of additional K…
1.3.6.1.4.1.2011.6.115.1.5.4.6Tablevdsl2UpboProfTablenot-accessiblecurrentThe table vdsl2UpboProfTable contains VDSL2 upbo configuration. The index of this table is vdsl2UpboProfName. A default profile with an index of 'DEFVAL' will …
1.3.6.1.4.1.2011.6.115.1.5.4.6.1Rowvdsl2UpboProfEntrynot-accessiblecurrentThe table vdsl2UpboProfTable contains VDSL2 upbo configuration . The index of this entry is vdsl2UpboProfName. A default profile with an index of 'DEFVAL' will…
1.3.6.1.4.1.2011.6.115.1.5.4.6.1.1Columnvdsl2UpboProfNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.4.6.1.2Columnvdsl2UpboProfPsdBandread-createcurrentThis parameter defines the UPBO reference PSD used to compute the upstream power back-off for each upstream band. A UPBOPSD defined for each band shall consist…
1.3.6.1.4.1.2011.6.115.1.5.4.6.1.3Columnvdsl2UpboProfKlread-createcurrentThis parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number…
1.3.6.1.4.1.2011.6.115.1.5.4.6.1.4Columnvdsl2UpboProfKlfread-createcurrentThis parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the f…
1.3.6.1.4.1.2011.6.115.1.5.4.6.1.5Columnvdsl2UpboProfKlAutoread-createcurrentThis parameter defines the mode in which kl0 is computed when Vdsl2UpboKlf is auto. The value is defined as below: 1-max(kl0CO,kl0CPE) 2-min(kl0CO,kl0CPE) 3-kl…
1.3.6.1.4.1.2011.6.115.1.5.4.6.1.6Columnvdsl2UpboProfRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.4.6.1.65535Columnvdsl2UpboProfBoostModeread-createcurrentThis object indicates whether the equalized FEXT UPBO method is supported or not. Options: 1. disable(1) - The Equalized FEXT UPBO method is not supported 2. e…
1.3.6.1.4.1.2011.6.115.1.5.4.6.1.65536Columnvdsl2UpboProfKl0RefBandread-createcurrentOctets 0+1 - length[1] Octets 2+3 - length[2] Octets 4+5 - length[3] Octets 6+7 - length[4]
1.3.6.1.4.1.2011.6.115.1.5.4.7Tablevdsl2NoiseMarginProfTablenot-accessiblecurrentThe table vdsl2NoiseMarginProfTable contains VDSL2 noise margin configuration. The index of this table is vdsl2NoiseMarginProfName. A default profile with an i…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1Rowvdsl2NoiseMarginProfEntrynot-accessiblecurrentThe table vdsl2NoiseMarginProfTable contains VDSL2 noise margin configuration. The index of this entry is vdsl2NoiseMarginProfName. A default profile with an i…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.1Columnvdsl2NoiseMarginProfNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.2Columnvdsl2NoiseMarginProfTargetSnrmDsread-createcurrentThe minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.3Columnvdsl2NoiseMarginProfTargetSnrmUsread-createcurrentThe minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete i…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.4Columnvdsl2NoiseMarginProfMaxSnrmDsread-createcurrentThe maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xT…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.5Columnvdsl2NoiseMarginProfMaxSnrmUsread-createcurrentThe maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xT…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.6Columnvdsl2NoiseMarginProfMinSnrmDsread-createcurrentThe minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.7Columnvdsl2NoiseMarginProfMinSnrmUsread-createcurrentThe minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.8Columnvdsl2NoiseMarginProfRaUsNrmDsread-createcurrentThe Downstream Up-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream noise margin is above this value and s…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.9Columnvdsl2NoiseMarginProfRaUsNrmUsread-createcurrentThe Upstream Up-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream noise margin is above this value and stays…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.10Columnvdsl2NoiseMarginProfRaUsTimeDsread-createcurrentThe Downstream Up-Shift Time Interval, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of time that the downstream noise margin should …
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.11Columnvdsl2NoiseMarginProfRaUsTimeUsread-createcurrentThe Upstream Up-Shift Time Interval, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay abov…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.12Columnvdsl2NoiseMarginProfRaDsNrmsDsread-createcurrentThe Downstream Down-Shift Noise Margin value, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. If the downstream noise margin is below this value and…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.13Columnvdsl2NoiseMarginProfRaDsNrmsUsread-createcurrentThe Upstream Downshift Noise Margin value, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. If the upstream noise margin is below this value and stay…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.14Columnvdsl2NoiseMarginProfRaDsTimeDsread-createcurrentThe Downstream Downshift Time Interval, to be used when Vdsl2LineConfRaModeDs is set to DynamicRa. The interval of time the downstream noise margin should stay…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.15Columnvdsl2NoiseMarginProfRaDsTimeUsread-createcurrentThe Upstream Down-Shift Time Interval, to be used when Vdsl2LineConfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay be…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.16Columnvdsl2NoiseMarginProfDsThresholdDsread-createcurrentData Rate Threshold Downshift for downstream direction. A 'Down-shift rate change' event is triggered when the actual downstream data rate is below the data ra…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.17Columnvdsl2NoiseMarginProfUsThresholdDsread-createcurrentData Rate Threshold Up shift for downstream direction. An 'Up-shift rate change' event is triggered when the actual downstream data rate exceeds, by more than …
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.18Columnvdsl2NoiseMarginProfDsThresholdUsread-createcurrentData Rate Threshold Downshift for upstream direction. A 'Down-shift rate change' event is triggered when the actual upstream data rate is below the data rate a…
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.19Columnvdsl2NoiseMarginProfUsThresholdUsread-createcurrentData Rate Threshold Up shift for upstream direction. An 'Up-shift rate change' event is triggered when the actual upstream data rate exceeds, by more than the …
1.3.6.1.4.1.2011.6.115.1.5.4.7.1.20Columnvdsl2NoiseMarginProfRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.4.8Tablevdsl2DelayInpProfTablenot-accessiblecurrentThe table vdsl2DelayInpProfTable contains VDSL2 delay inp configuration. The index of this table is vdsl2DelayInpProfName. A default profile with an index of '…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1Rowvdsl2DelayInpProfEntrynot-accessiblecurrentThe table vdsl2DelayInpProfTable contains VDSL2 delay inp configuration. The index of this entry is vdsl2DelayInpProfName. A default profile with an index of '…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.1Columnvdsl2DelayInpProfNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.2Columnvdsl2DelayInpProfForceINPread-createcurrentThis parameter indicates that the framer settings of the bearer shall be selected such that the impulse noise protection computed according to the formula spec…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.3Columnvdsl2DelayInpProfCh1MaxDelayDsread-createcurrentIf retransmission is not used in downstream direction,this parameter is maximum interleave delay on downstream direction. The maximum one-way interleaving dela…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.4Columnvdsl2DelayInpProfCh1MaxDelayUsread-createcurrentIf retransmission is not used in upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choo…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.5Columnvdsl2DelayInpProfCh1MinProtectionDsread-createcurrentIf retransmission is not used in downstream direction,this parameter is minimum impulse noise protection for the bearer channel on downstream direction. The mi…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.6Columnvdsl2DelayInpProfCh1MinProtectionUsread-createcurrentIf retransmission is not used in upstream direction,this parameter is minimum impulse noise protection for the bearer channel on upstream direction. The minimu…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.7Columnvdsl2DelayInpProfCh2MaxDelayDsread-createcurrentMaximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choos…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.8Columnvdsl2DelayInpProfCh2MaxDelayUsread-createcurrentMaximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose th…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.9Columnvdsl2DelayInpProfCh2MinProtectionDsread-createcurrentMinimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can …
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.10Columnvdsl2DelayInpProfCh2MinProtectionUsread-createcurrentMinimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can ta…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.11Columnvdsl2DelayInpProfRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.12Columnvdsl2DelayInpProfCh1PhyRcontrolDsread-writecurrentTo enable or disable the retransmission function on downstream direction.
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.13Columnvdsl2DelayInpProfCh1PhyRcontrolUsread-writecurrentTo enable or disable the retransmission function on upstream direction.
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.14Columnvdsl2DelayInpProfCh1INPmaxDsread-writecurrentMaximum Impulse Noise Protection on downstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.15Columnvdsl2DelayInpProfCh1INPmaxUsread-writecurrentMaximum Impulse Noise Protection on upstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6. …
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.16Columnvdsl2DelayInpProfCh1MinRtxRatioDsread-writecurrentMinimum rtxratio on downstream direction. Unit: 1/256
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.17Columnvdsl2DelayInpProfCh1MinRtxRatioUsread-writecurrentMinimum rtxratio on upstream direction. Unit: 1/256
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.18Columnvdsl2DelayInpProfCh1MinRSoverheadDsread-writecurrentThe minimum value of R/N on downstream direction. Unit: 1/256
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.19Columnvdsl2DelayInpProfCh1MinRSoverheadUsread-writecurrentThe minimum value of R/N on upstream direction. Unit: 1/256
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.20Columnvdsl2DelayInpProfCh2PhyRcontrolDsread-writecurrentTo enable or disable the retransmission function on downstream direction.
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.21Columnvdsl2DelayInpProfCh2PhyRcontrolUsread-writecurrentTo enable or disable the retransmission function on upstream direction.
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.22Columnvdsl2DelayInpProfCh2INPmaxDsread-writecurrentMaximum Impulse Noise Protection on downstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.23Columnvdsl2DelayInpProfCh2INPmaxUsread-writecurrentMaximum Impulse Noise Protection on upstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6. …
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.24Columnvdsl2DelayInpProfCh2MinRtxRatioDsread-writecurrentMinimum rtxratio on downstream direction. Unit: 1/256
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.25Columnvdsl2DelayInpProfCh2MinRtxRatioUsread-writecurrentMinimum rtxratio on upstream direction. Unit: 1/256
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.26Columnvdsl2DelayInpProfCh2MinRSoverheadDsread-writecurrentThe minimum value of R/N on downstream direction. Unit: 1/256
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.27Columnvdsl2DelayInpProfCh2MinRSoverheadUsread-writecurrentThe minimum value of R/N on upstream direction. Unit: 1/256
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.28Columnhwvdsl2DelayInpProfCh1MaxDelayRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (s…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.29Columnhwvdsl2DelayInpProfCh1MaxDelayRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.30Columnhwvdsl2DelayInpProfCh1MinDelayRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (s…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.31Columnhwvdsl2DelayInpProfCh1MinDelayRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.32Columnhwvdsl2DelayInpProfCh1MinInpShineRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is …
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.33Columnhwvdsl2DelayInpProfCh1MinInpShineRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.34Columnhwvdsl2DelayInpProfCh1MinInp8ShineRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is …
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.35Columnhwvdsl2DelayInpProfCh1MinInp8ShineRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.36Columnhwvdsl2DelayInpProfCh1ShineRatioRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.37Columnhwvdsl2DelayInpProfCh1ShineRatioRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 i…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.38Columnhwvdsl2DelayInpProfCh1MinInpReinRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.39Columnhwvdsl2DelayInpProfCh1MinInpReinRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.40Columnhwvdsl2DelayInpProfCh1MinInp8ReinRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.41Columnhwvdsl2DelayInpProfCh1MinInp8ReinRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.42Columnhwvdsl2DelayInpProfCh1IatReinRtxDsread-createcurrentIf retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequ…
1.3.6.1.4.1.2011.6.115.1.5.4.8.1.43Columnhwvdsl2DelayInpProfCh1IatReinRtxUsread-createcurrentIf retransmission is used in upstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequen…
1.3.6.1.4.1.2011.6.115.1.6Nodevdsl2Scalar
1.3.6.1.4.1.2011.6.115.1.6.1Nodevdsl2ScalarSC
1.3.6.1.4.1.2011.6.115.1.6.1.1Scalarvdsl2ScalarSCMaxInterfacesread-onlycurrentThis value determines the maximum number of interfaces supported by vdsl2SCStatusTable, vdsl2SCStatusBandTable, and vdsl2SCStatusSegmentTable.
1.3.6.1.4.1.2011.6.115.1.6.1.2Scalarvdsl2ScalarSCAvailInterfacesread-onlycurrentThis value determines the currently available number of interfaces listed in vdsl2SCStatusTable, vdsl2SCStatusBandTable, and vdsl2SCStatusSegmentTable.
1.3.6.1.4.1.2011.6.115.1.8Nodevdsl2Conformance
1.3.6.1.4.1.2011.6.115.1.8.1Nodevdsl2Groups
1.3.6.1.4.1.2011.6.115.1.8.1.1Groupvdsl2LineGroupcurrentThe group of configuration, status, and commands objects on the line level.
1.3.6.1.4.1.2011.6.115.1.8.1.2Groupvdsl2ChannelStatusGroupcurrentThe group of status objects on the channel level.
1.3.6.1.4.1.2011.6.115.1.8.1.3Groupvdsl2ChannelStatusAtmGroupcurrentThe group of status objects on the data path level when it is ATM.
1.3.6.1.4.1.2011.6.115.1.8.1.4Groupvdsl2ChannelStatusPtmGroupcurrentThe group of status objects on the data path level when it is PTM.
1.3.6.1.4.1.2011.6.115.1.8.1.5Groupvdsl2PrivSCStatusGroupcurrentThe group of status objects on the sub-carrier level. They are updated as a result of a DELT process.
1.3.6.1.4.1.2011.6.115.1.8.1.6Groupvdsl2DeltGroupcurrentThe group of status objects on the sub-carrier level. They are updated as a result of a DELT process.
1.3.6.1.4.1.2011.6.115.1.8.1.7Groupvdsl2LineInventoryGroupcurrentThe group of inventory objects per xTU.
1.3.6.1.4.1.2011.6.115.1.8.1.8Groupvdsl2LineConfTemplateGroupcurrentThe group of objects in a line configuration template.
1.3.6.1.4.1.2011.6.115.1.8.1.9Groupvdsl2LineConfProfGroupcurrentThe group of objects in a line configuration profile.
1.3.6.1.4.1.2011.6.115.1.8.1.10Groupvdsl2LineConfProfRaGroupcurrentThe group of objects required for controlling the rate adaptive behavior of the line.
1.3.6.1.4.1.2011.6.115.1.8.1.11Groupvdsl2LineConfProfMsgMinGroupcurrentThe group of objects required for controlling the rate reserved for Overhead traffic.
1.3.6.1.4.1.2011.6.115.1.8.1.12Groupvdsl2LineConfProfModeSpecGroupcurrentThe group of objects in a line configuration profile that have an instance for each operation mode allowed.
1.3.6.1.4.1.2011.6.115.1.8.1.13Groupvdsl2ChConfProfileGroupcurrentThe group of objects in a channel configuration profile.
1.3.6.1.4.1.2011.6.115.1.8.1.14Groupvdsl2ChConfProfileAtmGroupcurrentThe group of configuration objects required when the data path is ATM.
1.3.6.1.4.1.2011.6.115.1.8.1.15Groupvdsl2ChConfProfileMinResGroupcurrentThe group of configuration objects required for the reserved data rate.
1.3.6.1.4.1.2011.6.115.1.8.1.16Groupvdsl2LineAlarmConfTemplateGroupcurrentThe group of objects in a line alarm template.
1.3.6.1.4.1.2011.6.115.1.8.1.17Groupvdsl2LineAlarmConfProfileGroupcurrentThe group of objects in a line alarm profile.
1.3.6.1.4.1.2011.6.115.1.8.1.18Groupvdsl2ChAlarmConfProfileGroupcurrentThe group of objects in a channel alarm profile.
1.3.6.1.4.1.2011.6.115.1.8.1.19Groupvdsl2PMLineCurrGroupcurrentThe group of objects that report the line level counters for current PM intervals.
1.3.6.1.4.1.2011.6.115.1.8.1.20Groupvdsl2PMLineCurrInitGroupcurrentThe group of objects that report the full initializations counters for current PM intervals.
1.3.6.1.4.1.2011.6.115.1.8.1.21Groupvdsl2PMLineCurrInitShortGroupcurrentThe group of objects that report the short initializations counters for current PM intervals.
1.3.6.1.4.1.2011.6.115.1.8.1.22Groupvdsl2PMLineHist15MinGroupcurrentThe group of line level PM counters for the previous 15 minutes intervals.
1.3.6.1.4.1.2011.6.115.1.8.1.23Groupvdsl2PMLineHist1DayGroupcurrentThe group of line level PM counters for the previous 24 hours intervals.
1.3.6.1.4.1.2011.6.115.1.8.1.24Groupvdsl2PMLineInitHist15MinGroupcurrentThe group of PM counters for the previous 15 minutes intervals full initializations.
1.3.6.1.4.1.2011.6.115.1.8.1.25Groupvdsl2PMLineInitHist15MinShortGroupcurrentThe group of PM counters for the previous 15 minutes intervals short initializations.
1.3.6.1.4.1.2011.6.115.1.8.1.26Groupvdsl2PMLineInitHist1DayGroupcurrentThe group of PM counters for the previous 24 hours intervals full initializations.
1.3.6.1.4.1.2011.6.115.1.8.1.27Groupvdsl2PMLineInitHist1DayShortGroupcurrentThe group of PM counters for the previous 24 hours intervals short initializations.
1.3.6.1.4.1.2011.6.115.1.8.1.28Groupvdsl2PMChCurrGroupcurrentThe group of objects that report the channel level counters for current PM intervals.
1.3.6.1.4.1.2011.6.115.1.8.1.29Groupvdsl2PMChHist15MinGroupcurrentThe group of objects that report the channel level counters for previous 15 minutes PM intervals.
1.3.6.1.4.1.2011.6.115.1.8.1.30Groupvdsl2PMChHist1DGroupcurrentThe group of objects that report the channel level counters for previous 24 hours PM intervals.
1.3.6.1.4.1.2011.6.115.1.8.1.31Groupvdsl2ScalarDeltGroupcurrentThe group of objects that report the available memory resources for DELT processes.
1.3.6.1.4.1.2011.6.115.1.8.1.32Groupvdsl2ThreshNotificationGroupcurrentThis notification indicates alarm when this group supports notifications of significant conditions associated with VDSL2 lines.
1.3.6.1.4.1.2011.6.115.1.8.1.33Groupvdsl2StatusChangeNotificationGroupcurrentThis notification indicates alarm when this group supports notifications of thresholds crossing associated with VDSL2 lines.
1.3.6.1.4.1.2011.6.115.1.8.2Nodevdsl2Compliances
1.3.6.1.4.1.2011.6.115.1.8.2.1Compliancevdsl2LineMibCompliancecurrentThe compliance statement for SNMP entities which manage VDSL2 interfaces.
1.3.6.1.4.1.2011.6.115.1.9Nodevdsl2Mode
1.3.6.1.4.1.2011.6.115.1.9.1Scalarhwvdslmodecfgread-writecurrentThis object is used to change VDSL management mode. After the mode being changed, system will automatically save data and reboot.
1.3.6.1.4.1.2011.6.115.1.10Nodevdsl2GlobalConfig
1.3.6.1.4.1.2011.6.115.1.10.1Scalarvdsl2DpboEselGlobalConfigSwitchread-writecurrentEnable/Disable VDSL port DPBOESEL shall Feature. This object is defaulted disabled(2). Options: 1. enabled(1) - enabled the switch 2. disabled(2) - disabled th…
1.3.6.1.4.1.2011.6.115.1.10.2Scalarvdsl2DpboEselGlobalConfigValueread-writecurrentThis configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi…
1.3.6.1.4.1.2011.6.115.1.10.3Scalarvdsl2ProfileAutoNegotiationSwitchread-writecurrentEnable/Disable the VDSL2 G993.2 profile auto-negotiation function. Default values:disabled(2). Options: 1. enabled(1) - enabled the switch 2. disabled(2) - dis…
1.3.6.1.4.1.2011.6.115.1.10.4Scalarvdsl2MaximumInterleavedDepthread-writecurrentSet the VDSL2 maximum interleaved depth function. Default values:maxInterleavedDepth511(2). Options: 1. maxInterleavedDepth64(1) - it means the interleaving de…
1.3.6.1.4.1.2011.6.115.1.11Nodehwvdsl2AutoDeleteProfUnused
1.3.6.1.4.1.2011.6.115.1.11.1Scalarhwvdsl2AutoDeleteProfUnusedProfTyperead-writecurrentThe profile type of deleting unused VDSL profile. Options: 1. vdsl2LineConfTemplate(1) - VDSL2 line template 2. vdsl2LineConfProf(2) - VDSL2 line profile 3. vd…
1.3.6.1.4.1.2011.6.115.1.11.2Scalarhwvdsl2AutoDeleteProfUnusedOperTyperead-writecurrentThe operation type of deleting unused VDSL profile. This object is defaulted all(2). Options: 1. first(1) - Delete first profile 2. all(2) - Delete all profile
1.3.6.1.4.1.2011.6.115.1.15Nodehwvdsl2Traps
1.3.6.1.4.1.2011.6.115.1.15.1Nodehwvdsl2CommonTraps
1.3.6.1.4.1.2011.6.115.1.15.1.0Nodehwvdsl2CommonTrapsPrefix
1.3.6.1.4.1.2011.6.115.1.15.1.0.1Notificationhwvdsl2ModeSwitchTrapcurrentVDSL mode switch trap. This trap message is generated when the VDSL line mode fails to be switched.
1.3.6.1.4.1.2011.6.115.1.15.1.0.2Notificationhwvdsl2CurrentModeTrapcurrentVDSL current mode trap. This trap message is generated when the current mode of the VDSL line is reported to the NMS periodically.
1.3.6.1.4.1.2011.6.115.1.15.1.0.3Notificationhwvdsl2PortStatusChangeTrapcurrentVDSL port status change trap. This trap message is generated when the port status changes, for example from up to down or from down to up.The parameter informa…
1.3.6.1.4.1.2011.6.115.1.15.1.0.4Notificationhwvdsl2DeltOperResultTrapcurrentVDSL delt trap. This trap message is generated when the result of the DELT performed on the VDSL line is reported.
1.3.6.1.4.1.2011.6.115.1.15.1.0.5Notificationhwvdsl2TemplateIDChangeTrapcurrentVDSL template change trap. This trap message is generated when the VDSL templete changed.
1.3.6.1.4.1.2011.6.115.1.15.2Nodehwvdsl2AlarmTraps
1.3.6.1.4.1.2011.6.115.1.15.2.0Nodehwvdsl2AlarmTrapsPrefix
1.3.6.1.4.1.2011.6.115.1.15.2.0.1Notificationhwvdsl2AutoDeactivateLackLicensesAlarmTrapcurrentThis trap message is generated when some xDSL ports or all the xDSL ports are automatically deactivated due to lack of licenses.
1.3.6.1.4.1.2011.6.115.1.15.2.0.2Notificationhwvdsl2PortAutoDeactiveLineFaultAlarmTrapcurrentThis trap message is generated when the VDSL port is automatically deactivated due to the line fault.
1.3.6.1.4.1.2011.6.115.1.15.2.0.3Notificationhwvdsl2PortReactiveAfterRecoverAlarmTrapcurrentThis trap message is generated when the VDSL port is re-activated after the VDSL line recovers.
1.3.6.1.4.1.2011.6.115.1.15.2.0.4Notificationhwvdsl2PerformanceStatiReachThresholdAlarmTrapcurrentThis trap message is generated when the line performance statistics of the VDSL port reach the threshold.
1.3.6.1.4.1.2011.6.115.1.15.2.0.5Notificationhwvdsl2DownstreamRateLowerThresholdAlarmTrapcurrentThis trap message is generated when the xDSL channel downstream rate is lower than the threshold.
1.3.6.1.4.1.2011.6.115.1.15.2.0.6Notificationhwvdsl2ActivePortFailConfigParaAlarmTrapcurrentThis trap message is generated when it fails to activate the port by using the VDSL line configuration parameters.
1.3.6.1.4.1.2011.6.115.1.15.2.0.7Notificationhwvdsl2PerformanceStatisReachThresholdAlarmTrapcurrentThis trap message is generated when the channel performance statistics of the VDSL port reach the threshold.
1.3.6.1.4.1.2011.6.115.1.15.2.0.8Notificationhwvdsl2ChannelUpstreamLowerThresholdAlarmTrapcurrentThis trap message is generated when the xDSL channel upstream rate is lower than the threshold.
1.3.6.1.4.1.2011.6.115.1.15.2.0.9Notificationhwvdsl2VTURPowerOffAlarmTrapcurrentThis trap message is generated when the VTU-R is powered off.
1.3.6.1.4.1.2011.6.115.1.15.2.0.10Notificationhwvdsl2PortActiveRateChangeAlarmTrapcurrentThis trap message is generated when the VDSL port actived rate change.
1.3.6.1.4.1.2011.6.115.1.15.2.0.11Notificationhwvdsl2ChipsetUnavailableAlarmTrapcurrentThis trap message is generated when the VDSL chipset is unavailable.
1.3.6.1.4.1.2011.6.115.1.15.2.0.12Notificationhwvdsl2ChipsetRecoverAlarmTrapcurrentThis trap message is generated when the VDSL chipset recovers from unavailability.
1.3.6.1.4.1.2011.6.115.1.15.2.0.13Notificationhwvdsl2ChannelUpstreamExcThreAlarmTrapcurrentThis trap message is generated when the xDSL channel upstream rate increases to a value higher than the threshold.
1.3.6.1.4.1.2011.6.115.1.15.2.0.14Notificationhwvdsl2ChannelUpstreamRestoreThreAlarmTrapcurrentThis trap message is generated when the xDSL channel upstream rate decreases to a value lower than the threshold.
1.3.6.1.4.1.2011.6.115.1.15.2.0.15Notificationhwvdsl2ChannelDownstreamExcThreAlarmTrapcurrentThis trap message is generated when the xDSL channel downstream rate increases to a value higher than the threshold.
1.3.6.1.4.1.2011.6.115.1.15.2.0.16Notificationhwvdsl2ChannelDownstreamRestoreThreAlarmTrapcurrentThis trap message is generated when the xDSL channel downstream rate decreases to a value lower than the threshold.
1.3.6.1.4.1.2011.6.115.1.15.2.0.17Notificationhwvdsl2UnSuppVectorPortActFailAlarmTrapcurrentWhen the CPE connected to the port does not support vectoring and cannot be activated in 993.2 mode, this trap is sent.
1.3.6.1.4.1.2011.6.115.1.16Nodehwvdsl2TrapsVbOids
1.3.6.1.4.1.2011.6.115.1.16.1Scalarhwvdsl2LinePMThresholdItemaccessible-for-notifycurrentIndicate the threshold item.
1.3.6.1.4.1.2011.6.115.1.16.2Scalarhwvdsl2LinePMThresholdValueaccessible-for-notifycurrentVDSL threshold value
1.3.6.1.4.1.2011.6.115.1.16.3Scalarhwvdsl2PortActFailReasonaccessible-for-notifycurrentIndicate the the reason of the active port fail.
1.3.6.1.4.1.2011.6.115.1.16.4Scalarhwvdsl2ChPMThresholdItemaccessible-for-notifycurrentIndicate the threshold value of threshold item .
1.3.6.1.4.1.2011.6.115.1.16.5Scalarhwvdsl2ChPMCurrentValueaccessible-for-notifycurrentIndicate the current value of threshold item.
1.3.6.1.4.1.2011.6.115.1.16.6Scalarhwvdsl2ChPMThresholdValueaccessible-for-notifycurrentIndicate the threshold value of threshold item.
1.3.6.1.4.1.2011.6.115.1.16.7Scalarhwvdsl2LineActRateUsaccessible-for-notifycurrentIndicate the line active data rate in the upstream direction.
1.3.6.1.4.1.2011.6.115.1.16.8Scalarhwvdsl2LineActRateDsaccessible-for-notifycurrentIndicate the line active data rate in the downstream direction.
1.3.6.1.4.1.2011.6.115.1.16.9Scalarhwvdsl2ChipsetIDaccessible-for-notifycurrentChipsetID, the chipset id of the board.
1.3.6.1.4.1.2011.6.115.1.16.10Scalarhwvdsl2ModeSwitchResultaccessible-for-notifycurrentVDSL mode switch result. Options: 1. success(0) - success 2. fail(1) - fail
1.3.6.1.4.1.2011.6.115.1.16.11Scalarhwvdsl2LinePMCurrentValueaccessible-for-notifycurrentIndicate the current value of threshold item.
1.3.6.1.4.1.2011.6.115.1.16.12ScalarhwVdsl2RequestIDaccessible-for-notifycurrentRequest ID
1.3.6.1.4.1.2011.6.115.1.16.13ScalarhwACTChngeDescaccessible-for-notifycurrentThe VDSL port actived rate change description.
1.3.6.1.4.1.2011.6.115.1.16.14ScalarhwVdsl2TemplateTypeaccessible-for-notifycurrentType of the VDSL template ID. Options: 1. lineConfTemplate(1) - VDSL2 line template 2. alarmConfTemplate(2) - VDSL2 alarm template 3. spectrumProf(3) - VDSL2 s…
Type Definitions
NameSyntaxStatusDescription
Vdsl2LineClockReferenceTypeINTEGER { freeRun(1), system(2) }currentThe various clock references for the VDSL line. Options: 1. freeRun(1) - network timing reference clock mode is freeRun 2. system(2) - network timing reference clock mode is system