HUAWEI-VDSL2-PRIV-MIB
50 objects
This MIB is used for defining Huawei's vdsl2 priv management MIB objects.
Imported Objects
| HUAWEI-DEVICE-MIB | hwFrameIndex hwPortIndex hwSlotIndex |
| HUAWEI-VDSL2-LINE-MIB | vdsl2 |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.115.1.7 | Identityvdsl2Priv | from | This MIB is used for defining Huawei's vdsl2 priv management MIB objects. | |
| 1.3.6.1.4.1.2011.6.115.1.7.1 | Nodevdsl2Test | |||
| 1.3.6.1.4.1.2011.6.115.1.7.1.1 | Tablevdsl2SeltTestTable | not-accessible | current | This table contains the VDSL SELT configuration, SELT result, SELT data. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1 | Rowvdsl2SeltTestEntry | not-accessible | current | This table contains the VDSL SELT configuration, SELT result, SELT data. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.1 | Columnvdsl2SeltTestOperType | read-write | current | This object is used to start the VDSL SELT. Only the start of the SELT is supported current. The stop of the SELT is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.2 | Columnvdsl2SeltTestOperResult | accessible-for-notify | current | Selt test operation result. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.3 | Columnvdsl2SeltTestResultNo | accessible-for-notify | current | Selt test result serial number. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.4 | Columnvdsl2SeltTestResultLastFlag | accessible-for-notify | current | Last package flag for test result. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.5 | Columnvdsl2SeltTestResult | accessible-for-notify | current | Selt test result data. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.6 | Columnvdsl2SeltTestParamLoopLength | read-only | current | Selt test parameter Loop Length. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.7 | Columnvdsl2SeltTestParamLoopTermin | read-only | current | Selt test parameter Loop Termination. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.8 | Columnvdsl2SeltTestParamLoopGauge | read-write | current | Selt test parameter Loop Gauge. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.9 | Columnvdsl2SeltTestParamUpShnCap | read-only | current | Selt test parameter Upstream Shannon Capacity. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.10 | Columnvdsl2SeltTestParamDwnShnCap | read-only | current | Selt test parameter Downstream Shannon Capacity. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.11 | Columnvdsl2SeltTestParamInbandNoise | read-only | current | Selt test parameter Inband Noise 4096 values that indicate inband noise in DB/Hz, covering VDSL bands, from 0 to 30 MHz. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.12 | Columnvdsl2SeltTestParamTerminResp | read-only | current | Selt test parameter Termination Response 180 values that indicate termination response magnitude from 0 to 18 kft. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.13 | Columnvdsl2SeltTestParamUpMgnAtRate | read-only | current | Selt test parameter Upstream Rate vs. Margin This value is a measure of the quality of your upstream data signal relative to the noise on the line. Hundreds of… |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.14 | Columnvdsl2SeltTestParamDwnMgnAtRate | read-only | current | Selt test parameter Downstream Rate vs. Margin This value is a measure of the quality of your downstream data signal relative to the noise on the line. Hundred… |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.15 | Columnvdsl2SeltTestParamUpRateAtMgn | read-only | current | Selt test parameter Upstream Margin vs. Rate |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.16 | Columnvdsl2SeltTestParamDwnRateAtMgn | read-only | current | Selt test parameter Downstream Margin vs. Rate |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65535 | Columnhwvdsl2SeltTestParamAttnAt180KHZ | read-only | current | Selt test parameter AttnAt180KHZ. It ranges from -950 to 0 (physical values are -95 to 0 dB). The invalid value is -1. If no SELT is performed, no SELT data is… |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65536 | Columnhwvdsl2SeltTestParamAttnAt300KHZ | read-only | current | Selt test parameter AttnAt300KHZ. It ranges from -950 to 0 (physical values are -95 to 0 dB). The invalid value is -1. If no SELT is performed, no SELT data is… |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65537 | Columnhwvdsl2SeltTestParamQSPsdValue | read-only | current | Selt test parameter QuietSignal PSD. An array of 4096 16-bits values, designed for supporting up to 4096 (downstream) sub-carriers. It ranges from -150 to -40 … |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65538 | Columnhwvdsl2SeltTestParamUnCalibLineScale | read-only | current | The scale factor of uncalibrated echo response shall be coded as a 32 bit unsigned integer. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65539 | Columnhwvdsl2SeltTestParamUnCalibEchoRespRealSegment1 | read-only | current | The uncalibrated echo response, UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i … |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65540 | Columnhwvdsl2SeltTestParamUnCalibEchoRespRealSegment2 | read-only | current | The uncalibrated echo response, UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i … |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65541 | Columnhwvdsl2SeltTestParamUnCalibEchoRespImgSegment1 | read-only | current | The uncalibrated echo response, UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i … |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65542 | Columnhwvdsl2SeltTestParamUnCalibEchoRespImgSegment2 | read-only | current | The uncalibrated echo response, UER(i* UER_G*Df), shall be represented in linear format by a scale factor and a normalized complex number a(i)+j*b(i), where i … |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65548 | Columnhwvdsl2SeltTestParamQlnGroupSize | read-only | current | Number of QLN(quiet line noise) per group. The scale value is 1 or 4294967295.4294967295 is invalid value. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65549 | Columnhwvdsl2SeltTestParamQmeC | read-write | current | The status of QLN capture switch. Options: 1. enable(1) - Enable QLN capture switch 2. disable(2) - Disable QLN capture switch 3. invalid(-1) - Invalid value |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65550 | Columnhwvdsl2SeltTestParamUmeC | read-write | current | The status of UER capture switch. Options: 1. enable(1) - Enable UER capture switch 2. disable(2) - Disable UER capture switch 3. invalid(-1) - Invalid value |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65551 | Columnhwvdsl2SeltTestParaVarUerC | read-only | current | The relative variance of the uncalibrated echo response REL_VAR_UER(i* UER_G *Df) shall be represented as an 8-bit unsigned integer v(i), where i is the subcar… |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65552 | Columnhwvdsl2SeltTestParaUerMmdC | read-write | current | This parameter is the maximum allowed time for SELT uncalibrated echo response measurement, between the time of the start command written by the SELT-PMD-ME, a… |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65553 | Columnhwvdsl2SeltTestParaQlnMmdC | read-write | current | This parameter is the maximum allowed time for SELT quiet line noise measurement, between the time of the start command written by the SELT-PMD-ME, and the tim… |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65554 | Columnhwvdsl2SeltTestParaUerStatus | read-only | current | UerStatus. Options: 1.off(1) - The status is off. 2.running(2) - The status is running. 3.completed(3) - The status is completed. 4.failed(4) - The status is f… |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65555 | Columnhwvdsl2SeltTestParaQlnStatus | read-only | current | QlnStatus. Options: 1.off(1) - The status is off. 2.running(2) - The status is running. 3.completed(3) - The status is completed. 4.failed(4) - The status is f… |
| 1.3.6.1.4.1.2011.6.115.1.7.1.1.1.65556 | Columnhwvdsl2SeltTestParamCalcEnable | read-write | current | The status of calculation switch. Options: 1. enable(1) - Enable calculation switch 2. disable(2) - Disable calculation switch 3. invalid(-1) - Invalid value D… |
| 1.3.6.1.4.1.2011.6.115.1.7.1.2 | Tablevdsl2SeltTestLevelTable | not-accessible | current | This table supports the configuration of vdsl selt level. The indexes of this table are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.2.1 | Rowvdsl2SeltTestLevelEntry | not-accessible | current | This table supports the configuration of vdsl selt level. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.2.1.1 | Columnhwvdsl2SeltLevel | read-write | current | The level of vdsl SELT: 1 Level0; 2 Level1; 3 Level2; 4 Level3. A special value of -1 indicates the level of vdsl SELT is invalid. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.3 | Tablevdsl2SeltCalibrationTable | not-accessible | current | This table describes calibration data of selt test. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.3.1 | Rowvdsl2SeltCalibrationEntry | not-accessible | current | This table describes calibration data of selt test. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.3.1.1 | Columnvdsl2SeltCalibrationInvVendorId | read-only | current | It consists of 8 binary octets, including a provider code. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.3.1.2 | Columnvdsl2SeltCalibrationDataSegment1 | read-only | current | The part 1 of selt calibration data. The unit of selt calibration data is 0.00001. |
| 1.3.6.1.4.1.2011.6.115.1.7.1.3.1.3 | Columnvdsl2SeltCalibrationDataSegment2 | read-only | current | The part 2 of selt calibration data. The unit of selt calibration data is 0.00001. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VSDLSELTOPERRESULT | INTEGER { normal(1), fail(2), abort(3) } | current | the result of selt test Options: 1. normal(1) - The result of selt test is normal 2. fail(2) - The result of selt test is fail 3. abort(3) - Selt test abnormal |
| VSDLSELTOPERTYPE | INTEGER { stop(0), adslstart(1), vdsl2start(2) } | current | the operation type of selt test Options: 1. stop(0) - Stop the VDSL or ADSL SELT, which is not supported currently 2. adslstart(1) - Start the ADSL SELT in the VDSL compatible mode, which is not supported currently 3. v… |
| VSDLSELTPARAMLOOPGAUGE | INTEGER { greater26awg(1), equal26awg(2), equal24awg(3), less24awg(4), unknownawg(5) } | current | Gauge specification in the SELT Options: 1. greater26awg(1) - Greater than 26 AWG 2. equal26awg(2) - Equal to 26 AWG 3. equal24awg(3) - Equal to 24 AWG 4. less24awg(4) - Smaller than 24AWG 5. unknownawg(5) - Unknown |
| VSDLSELTPARAMLOOPTERMIN | INTEGER { open(0), short(1), unknown(2), terminated(3) } | current | Definition of the terminal type in the SELT Options: 1. open(0) - Open 2. short(1) - Closed 3. unknown(2) - Unknown 4. terminated(3) - Connected |
| VSDLSELTRESULTLASTFLAG | INTEGER { false(0), true(1) } | current | last flag of selt test data Options: 1. false(0) - Flag of selt is false 2. true(1) - Flag of selt is true |