JUNIPER-NAT-MIB
37 objects
This module defines the object that are used to monitor network address translation attributes.
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressIPv4 InetAddressType |
| JUNIPER-SMI | jnxSvcsMibRoot |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.59.1 | IdentityjnxNatMIB | This module defines the object that are used to monitor network address translation attributes. | ||
| 1.3.6.1.4.1.2636.3.59.1.0 | NodejnxNatNotifications | |||
| 1.3.6.1.4.1.2636.3.59.1.0.1 | NotificationjnxNatAddrPoolThresholdStatus | current | The Source NAT address pool utilization threshold status trap signifies that the address pool utilization is either exceeds certain percentage, or clear of tha… | |
| 1.3.6.1.4.1.2636.3.59.1.1 | NodejnxNatObjects | |||
| 1.3.6.1.4.1.2636.3.59.1.1.1 | TablejnxSrcNatStatsTable | not-accessible | current | This table exposes the source NAT translation attributes of the translated addresses. When performing source IP address translation, the services pic translate… |
| 1.3.6.1.4.1.2636.3.59.1.1.1.1 | RowjnxSrcNatStatsEntry | not-accessible | current | Source NAT address entries. It is indexed by the address pool table and the address allocated. |
| 1.3.6.1.4.1.2636.3.59.1.1.1.1.1 | ColumnjnxNatSrcPoolName | not-accessible | current | The name of dynamic source IP address pool. This is the address pool where the translated address is allocated from. |
| 1.3.6.1.4.1.2636.3.59.1.1.1.1.2 | ColumnjnxNatSrcXlatedAddrType | read-only | current | The type of dynamic source IP address allocated from the address pool used in the NAT translation. For NAT MIB, supporting ipv4(1) and ipv6(2) only. |
| 1.3.6.1.4.1.2636.3.59.1.1.1.1.3 | ColumnjnxNatSrcPoolType | read-only | current | Source NAT can do address translation with or without port translation. The source port pool type indicates whether the address translation is done with port o… |
| 1.3.6.1.4.1.2636.3.59.1.1.1.1.4 | ColumnjnxNatSrcNumPortAvail | read-only | current | The maxmimum number of ports available with this pool. This attribute is only applicable to NAT translations with PAT. |
| 1.3.6.1.4.1.2636.3.59.1.1.1.1.5 | ColumnjnxNatSrcNumPortInuse | read-only | current | The number of ports in use for this NAT address entry. This attribute is only applicable to translation with port translation. |
| 1.3.6.1.4.1.2636.3.59.1.1.1.1.6 | ColumnjnxNatSrcNumAddressAvail | read-only | current | The maximum number of addresses available in this pool. |
| 1.3.6.1.4.1.2636.3.59.1.1.1.1.7 | ColumnjnxNatSrcNumAddressInUse | read-only | current | The number of addresses in use from this pool. This attribute is only applicable to NAT translations without PAT. |
| 1.3.6.1.4.1.2636.3.59.1.1.1.1.8 | ColumnjnxNatSrcNumSessions | read-only | current | The number of sessions are in use based on this NAT address entry. |
| 1.3.6.1.4.1.2636.3.59.1.1.1.1.9 | ColumnjnxNatSrcNumAddressMapped | read-only | current | The number of public addresses mapped This attribute is only applicable for NAT translations with PAT. |
| 1.3.6.1.4.1.2636.3.59.1.1.2 | TablejnxNatRuleTable | not-accessible | current | This table monitors NAT rule hits |
| 1.3.6.1.4.1.2636.3.59.1.1.2.1 | RowjnxNatRuleEntry | not-accessible | current | NAT rule hit entries. It is indexed by the rule index |
| 1.3.6.1.4.1.2636.3.59.1.1.2.1.1 | ColumnjnxNatRuleName | not-accessible | current | NAT rule name |
| 1.3.6.1.4.1.2636.3.59.1.1.2.1.2 | ColumnjnxNatRuleType | read-only | current | NAT types: Static Source, Static Destination, Dynamic Source and NAPT |
| 1.3.6.1.4.1.2636.3.59.1.1.2.1.3 | ColumnjnxNatRuleTransHits | read-only | current | The number of hits on this NAT rule |
| 1.3.6.1.4.1.2636.3.59.1.1.3 | TablejnxNatPoolTable | not-accessible | current | This table monitors NAT pool hits |
| 1.3.6.1.4.1.2636.3.59.1.1.3.1 | RowjnxNatPoolEntry | not-accessible | current | NAT pool hit entries. It is indexed by the pool index |
| 1.3.6.1.4.1.2636.3.59.1.1.3.1.1 | ColumnjnxNatPoolName | not-accessible | current | NAT Pool name |
| 1.3.6.1.4.1.2636.3.59.1.1.3.1.2 | ColumnjnxNatPoolType | read-only | current | NAT types: Static Source, Static Destination, Dynamic Source and NAPT |
| 1.3.6.1.4.1.2636.3.59.1.1.3.1.3 | ColumnjnxNatPoolTransHits | read-only | current | The number of hits on this NAT Pool |
| 1.3.6.1.4.1.2636.3.59.1.1.4 | TablejnxNatPbaStatsTable | not-accessible | current | This table monitors NAT PBA stats |
| 1.3.6.1.4.1.2636.3.59.1.1.4.1 | RowjnxNatPbaStatsEntry | not-accessible | current | NAT PBA stats entries. It is indexed by the pool index |
| 1.3.6.1.4.1.2636.3.59.1.1.4.1.1 | ColumnjnxNatPbaPoolName | read-only | current | NAT PBA Pool name |
| 1.3.6.1.4.1.2636.3.59.1.1.4.1.2 | ColumnjnxNatPbaOutOfPortError | read-only | current | The Number of times the out of port error is hit |
| 1.3.6.1.4.1.2636.3.59.1.1.4.1.3 | ColumnjnxNatPbaMaxNumberOfPortBlocksUsed | read-only | current | The count of Max number of blocks used for the pool |
| 1.3.6.1.4.1.2636.3.59.1.1.4.1.4 | ColumnjnxNatPbaCurrentNumberOfPortBlocksInUse | read-only | current | The count of current number of blocks used for the pool |
| 1.3.6.1.4.1.2636.3.59.1.1.4.1.5 | ColumnjnxNatPbaPortBlockAllocErrors | read-only | current | The count of port block allocation errors |
| 1.3.6.1.4.1.2636.3.59.1.1.4.1.6 | ColumnjnxNatPbaPortBlockMemAllocErrors | read-only | current | The count of port block memory allocation errors |
| 1.3.6.1.4.1.2636.3.59.1.1.4.1.7 | ColumnjnxNatPbaPortBlockLimitExeededErrors | read-only | current | The count of port block limit exceeded errors hit |
| 1.3.6.1.4.1.2636.3.59.1.2 | NodejnxNatTrapVars | |||
| 1.3.6.1.4.1.2636.3.59.1.2.1 | ScalarjnxNatAddrPoolUtil | accessible-for-notify | current | The dynamic address pool utilization in percentage. |
| 1.3.6.1.4.1.2636.3.59.1.2.2 | ScalarjnxNatTrapSrcPoolName | accessible-for-notify | current | Source NAT Pool name who issues trap |