JUNIPER-TIMING-NOTFNS-MIB
188 objects
This is Juniper Networks' implementation of enterprise specific MIB for alarms from the router chassis box.
Imported Objects
| IF-MIB | ifOperStatus InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress |
| JUNIPER-SMI | Integer64 jnxTimingNotfnsMIBRoot |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2636.3.75.1 | IdentityjnxTimingNotfnsMIB | This is Juniper Networks' implementation of enterprise specific MIB for alarms from the router chassis box. | ||
| 1.3.6.1.4.1.2636.3.75.1.1 | NodejnxTimingFaults | |||
| 1.3.6.1.4.1.2636.3.75.1.1.1 | NotificationjnxTimingFaultLOSSet | current | A trap which signifies that Loss Of Signal has been detected. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.2 | NotificationjnxTimingFaultLOSClear | current | A trap which signifies that Loss Of Signal has been cleared. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.3 | NotificationjnxTimingFaultEFDSet | current | A trap which signifies Exceeded frequency deviation. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.4 | NotificationjnxTimingFaultEFDClear | current | A trap which signifies Exceeded frequency deviation cleared. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.5 | NotificationjnxTimingFaultLOESMCSet | current | A trap which signifies Loss of ESMC is set. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.6 | NotificationjnxTimingFaultLOESMCClear | current | A trap which signifies Loss of ESMC is cleared. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.7 | NotificationjnxTimingFaultQLFailSet | current | A trap which signifies ESMC/SSM Quality Level failed is set. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.8 | NotificationjnxTimingFaultQLFailClear | current | A trap which signifies ESMC/SSM Quality Level failed is cleared. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.9 | NotificationjnxTimingFaultLTISet | current | A trap which signifies Loss of timing information is set. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.10 | NotificationjnxTimingFaultLTIClear | current | A trap which signifies Loss of timing information is cleared. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.11 | NotificationjnxTimingFaultAcbcFpgaVerNotCompatible | current | A trap which signifies ACBC FPGA version is not compatible. jnxBootCpldFpgaRevMajor indicates the current ACBC FPGA Major revision jnxBootCpldFpgaRevMinor indi… | |
| 1.3.6.1.4.1.2636.3.75.1.1.12 | NotificationjnxTimingFaultBootCpldVerNotCompatible | current | A trap which signifies Boot-cpld version is not compatible. jnxClksyncVersion indicates the current Boot-cpld version. | |
| 1.3.6.1.4.1.2636.3.75.1.1.13 | NotificationjnxTimingFaultPriSrcFailed | current | A trap which signifies Primary source failed (Whenever PFM/CFM/SCM error occurs). jnxClksyncIfIndex is the Primary source interface index jnxClksyncIntfName is… | |
| 1.3.6.1.4.1.2636.3.75.1.1.14 | NotificationjnxTimingFaultSecSrcFailed | current | A trap which signifies Secondary source failed (Whenever PFM/CFM/SCM error occurs). jnxClksyncIfIndex is the Secondary source interface index jnxClksyncIntfNam… | |
| 1.3.6.1.4.1.2636.3.75.1.1.15 | NotificationjnxTimingFaultPtpUniNegRateRejectSet | current | A trap which signifies: When acting as MASTER - Failing/rejecting clients for signaling messages When acting as SLAVE - Failing or receiving rejection for sign… | |
| 1.3.6.1.4.1.2636.3.75.1.1.16 | NotificationjnxTimingFaultPtpUniNegRateRejectClear | current | A trap which signifies: When acting as MASTER - Failing/rejecting clients for signaling messages When acting as SLAVE - Failing or receiving rejection for sign… | |
| 1.3.6.1.4.1.2636.3.75.1.1.17 | NotificationjnxTimingEventSquelchSet | current | A trap which signifies that interface status changed to squelched. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.18 | NotificationjnxTimingEventSquelchClear | current | A trap which signifies that interface status changed to active. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.1.29 | NotificationjnxTimingAlarmNoForeignMasterSet | current | A trap which signifies that there is no foreign master available. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supp… | |
| 1.3.6.1.4.1.2636.3.75.1.1.30 | NotificationjnxTimingAlarmNoForeignMasterClear | current | A trap which signifies that there is now a foreign master available. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is s… | |
| 1.3.6.1.4.1.2636.3.75.1.1.33 | NotificationjnxTimingAlarmPtpLocalClockOutOfSyncSet | current | A trap which signifies that the local clock is out of sync. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported … | |
| 1.3.6.1.4.1.2636.3.75.1.1.34 | NotificationjnxTimingAlarmPtpLocalClockOutOfSyncClear | current | A trap which signifies that the local clock is no more out of sync. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is su… | |
| 1.3.6.1.4.1.2636.3.75.1.1.35 | NotificationjnxTimingAlarmLossOfReference1Set | current | A trap which signifies that EEC has lost reference1. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on… | |
| 1.3.6.1.4.1.2636.3.75.1.1.36 | NotificationjnxTimingAlarmLossOfReference1Clear | current | A trap which signifies that EEC has regained reference1. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported onl… | |
| 1.3.6.1.4.1.2636.3.75.1.1.37 | NotificationjnxTimingAlarmLossOfReference2Set | current | A trap which signifies that EEC has lost reference2. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only on… | |
| 1.3.6.1.4.1.2636.3.75.1.1.38 | NotificationjnxTimingAlarmLossOfReference2Clear | current | A trap which signifies that EEC has regained reference2. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported onl… | |
| 1.3.6.1.4.1.2636.3.75.1.1.43 | NotificationjnxTimingAlarmNoMoreReferenceSet | current | A trap which signifies that EEC has no references to lock. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported o… | |
| 1.3.6.1.4.1.2636.3.75.1.1.44 | NotificationjnxTimingAlarmNoMoreReferenceClear | current | A trap which signifies that EEC has a reference to lock. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported onl… | |
| 1.3.6.1.4.1.2636.3.75.1.1.45 | NotificationjnxTimingAlarmQlBelowThresholdSet | current | A trap which signifies that EEC QL has fallen below threshold. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is support… | |
| 1.3.6.1.4.1.2636.3.75.1.1.46 | NotificationjnxTimingAlarmQlBelowThresholdClear | current | A trap which signifies that EEC QL has regained the threshold. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is support… | |
| 1.3.6.1.4.1.2636.3.75.1.1.49 | NotificationjnxTimingAlarmTodInSignalFailSet | current | A trap which signifies that TOD input signal has failed. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported onl… | |
| 1.3.6.1.4.1.2636.3.75.1.1.50 | NotificationjnxTimingAlarmTodInSignalFailClear | current | A trap which signifies that TOD input signal is good. jnxClksyncAdditionalInformationStr has additional information for the trap. This TRAP is supported only o… | |
| 1.3.6.1.4.1.2636.3.75.1.2 | NodejnxTimingEvents | |||
| 1.3.6.1.4.1.2636.3.75.1.2.1 | NotificationjnxTimingEventPriSrcRecovered | current | A trap which signifies Primary source recovered. jnxClksyncIfIndex is the Primary source interface index jnxClksyncIntfName is the Primary source interface nam… | |
| 1.3.6.1.4.1.2636.3.75.1.2.2 | NotificationjnxTimingEventSecSrcRecovered | current | A trap which signifies Secondary source recovered. jnxClksyncIfIndex is the Secondary source interface index jnxClksyncIntfName is the Secondary source interfa… | |
| 1.3.6.1.4.1.2636.3.75.1.2.3 | NotificationjnxTimingEventPriRefChanged | current | A trap which signifies Primary reference changed (Ifd name change or change from synce to BITS/external interface etc). jnxClksyncIfIndex is the Primary refere… | |
| 1.3.6.1.4.1.2636.3.75.1.2.4 | NotificationjnxTimingEventSecRefChanged | current | A trap which signifies Secondary reference changed (Ifd name change or change from synce to BITS/external interface etc). jnxClksyncIfIndex is the Secondary re… | |
| 1.3.6.1.4.1.2636.3.75.1.2.5 | NotificationjnxTimingEventQLChangedRx | current | A trap which signifies RX SSM/ESMC quality level changed. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name jnxClksyncQualityCo… | |
| 1.3.6.1.4.1.2636.3.75.1.2.6 | NotificationjnxTimingEventQLChangedTx | current | A trap which signifies TX SSM/ESMC quality level changed. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name jnxClksyncQualityCo… | |
| 1.3.6.1.4.1.2636.3.75.1.2.7 | NotificationjnxTimingEventSynceHldovrToLck | deprecated | A trap which signifies SyncE Holdover to Locked EEC state. jnxClksyncIfIndex is the SyncE interface index jnxClksyncIntfName is the SyncE interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.2.8 | NotificationjnxTimingEventSynceLckToHldovr | deprecated | A trap which signifies SyncE Locked to Holdover EEC state. jnxClksyncIfIndex is the SyncE interface index jnxClksyncIntfName is the SyncE interface name. | |
| 1.3.6.1.4.1.2636.3.75.1.2.9 | NotificationjnxTimingEventDpllStatus | current | A trap which signifies that DPLL state change (unknown, lock_acq, locked, holdover, freerun). jnxClksyncDpllState indicates the Dpll status jnxClksyncDpllState… | |
| 1.3.6.1.4.1.2636.3.75.1.2.10 | NotificationjnxTimingEventSynceDpllStatus | current | A trap which signifies that Synce DPLL state change (unknown, lock_acq, locked, holdover, freerun). jnxClksyncIfIndex is the interface index from which Frequen… | |
| 1.3.6.1.4.1.2636.3.75.1.2.11 | NotificationjnxTimingEventBitsDpllStatus | current | A trap which signifies that BITS DPLL state change (unknown, lock_acq, locked, holdover, freerun). jnxClksyncIfIndex is the interface index from which Frequenc… | |
| 1.3.6.1.4.1.2636.3.75.1.2.12 | NotificationjnxTimingEventPtpServoStatus | current | A trap which signifies that PTP servo state (Init, Acquiring, PhaseAligned, FreeRun, Holdover). jnxPtpServoState indicates the ptp servo status jnxPtpServoStat… | |
| 1.3.6.1.4.1.2636.3.75.1.2.13 | NotificationjnxTimingEventPtpGMClockClassChange | current | A trap which signifies PTP clock class changes. jnxPtpGmId indicates the ptp Grand Master clock-id jnxPtpClass indicates the ptp Grand Master clock status. | |
| 1.3.6.1.4.1.2636.3.75.1.2.14 | NotificationjnxTimingEventPtpGMClockAccuracyChange | current | A trap which signifies PTP clock accuracy changes. jnxPtpGmId indicates the ptp Grand Master clock-id jnxPtpAccuracy indicates the ptp Grand Master clock accur… | |
| 1.3.6.1.4.1.2636.3.75.1.2.15 | NotificationjnxTimingEventPtpGMChange | current | A trap which signifies PTP Grand Master changes. jnxPtpGmId indicates the ptp Grand Master clock-id. | |
| 1.3.6.1.4.1.2636.3.75.1.2.16 | NotificationjnxTimingEventHybridStatus | current | A trap which signifies that Hybrid state (Init, FreqAcq, FreqLckPhaseAcq, FreqPhaseLck). jnxClksyncHybridState indicates the hybrid status jnxClksyncHybridStat… | |
| 1.3.6.1.4.1.2636.3.75.1.2.19 | NotificationjnxTimingEventLedColorChange | current | A trap which signifies TX SSM/ESMC quality level changed. jnxClksyncIfIndex is the interface index jnxClksyncIntfName is the interface name jnxClksyncColorStr … | |
| 1.3.6.1.4.1.2636.3.75.1.2.20 | NotificationjnxTimingPhaseOffsetThresholdExceeded | current | A trap which signifies Passive Port Threshold Exceeded. jnxPtpPhaseOffsetThresholdExceeded indicates whether the Phase Threshold of the monitored Passive Port … | |
| 1.3.6.1.4.1.2636.3.75.1.2.21 | NotificationjnxTimingEventPhaseErrorHoldoverStarted | current | A trap which signifies holdover started after phase-error-limit exceeded. jnxPtpPhaseCorrection is the attempted phase correction when threshold exceeded jnxPt… | |
| 1.3.6.1.4.1.2636.3.75.1.2.22 | NotificationjnxTimingEventPhaseErrorHoldoverEnded | current | A trap which signifies holdover from phase-error-limit feature ended jnxPtpPhaseMonitoringReason is the reason why holdover ended jnxPtpPhaseErrorRelativeThres… | |
| 1.3.6.1.4.1.2636.3.75.1.3 | NodejnxTimingNotfObjects | |||
| 1.3.6.1.4.1.2636.3.75.1.3.1 | ScalarjnxClksyncState | accessible-for-notify | current | Fault status. |
| 1.3.6.1.4.1.2636.3.75.1.3.2 | ScalarjnxClksyncIfIndex | accessible-for-notify | current | Snmp ifIndex of member interface. |
| 1.3.6.1.4.1.2636.3.75.1.3.3 | ScalarjnxClksyncIntfName | accessible-for-notify | current | Interface name. |
| 1.3.6.1.4.1.2636.3.75.1.3.4 | ScalarjnxAcbFpgaRevMajor | accessible-for-notify | current | Major version information. |
| 1.3.6.1.4.1.2636.3.75.1.3.5 | ScalarjnxAcbFpgaRevMinor | accessible-for-notify | current | Minor version information. |
| 1.3.6.1.4.1.2636.3.75.1.3.6 | ScalarjnxBootCpldFpgaRevMajor | accessible-for-notify | current | Major version information. |
| 1.3.6.1.4.1.2636.3.75.1.3.7 | ScalarjnxBootCpldFpgaRevMinor | accessible-for-notify | current | Minor version information. |
| 1.3.6.1.4.1.2636.3.75.1.3.8 | ScalarjnxClksyncQualityCode | accessible-for-notify | current | SSM/ESMC quality levels. |
| 1.3.6.1.4.1.2636.3.75.1.3.9 | ScalarjnxClksyncDpllState | accessible-for-notify | current | BITS/SyncE DPLL states. |
| 1.3.6.1.4.1.2636.3.75.1.3.10 | ScalarjnxPtpServoState | accessible-for-notify | current | PTP servo states. |
| 1.3.6.1.4.1.2636.3.75.1.3.11 | ScalarjnxPtpClass | accessible-for-notify | current | PTP clock status. |
| 1.3.6.1.4.1.2636.3.75.1.3.12 | ScalarjnxPtpAccuracy | accessible-for-notify | current | PTP clock accuracy. |
| 1.3.6.1.4.1.2636.3.75.1.3.13 | ScalarjnxPtpGmId | accessible-for-notify | current | PTP Grand Master clock-id. |
| 1.3.6.1.4.1.2636.3.75.1.3.14 | ScalarjnxPtpGmIpAddr | accessible-for-notify | current | PTP Grand Master stream ip-address. |
| 1.3.6.1.4.1.2636.3.75.1.3.15 | ScalarjnxClkStreamHandle | accessible-for-notify | current | PTP clock accuracy. |
| 1.3.6.1.4.1.2636.3.75.1.3.16 | ScalarjnxRemoteIpAddr | accessible-for-notify | current | PTP clock stream's remote ip-address. |
| 1.3.6.1.4.1.2636.3.75.1.3.17 | ScalarjnxClksyncHybridState | accessible-for-notify | current | hybrid states. |
| 1.3.6.1.4.1.2636.3.75.1.3.18 | ScalarjnxPtpPhaseOffset | accessible-for-notify | current | Phase Offset. |
| 1.3.6.1.4.1.2636.3.75.1.3.19 | ScalarjnxClksyncQualityCodeStr | accessible-for-notify | current | SSM/ESMC quality levels in string format. |
| 1.3.6.1.4.1.2636.3.75.1.3.20 | ScalarjnxClksyncDpllStateStr | accessible-for-notify | current | Dpll state in string format. |
| 1.3.6.1.4.1.2636.3.75.1.3.21 | ScalarjnxPtpServoStateStr | accessible-for-notify | current | PTP servo states in string format. |
| 1.3.6.1.4.1.2636.3.75.1.3.22 | ScalarjnxClksyncHybridStateStr | accessible-for-notify | current | hybrid states in string format. |
| 1.3.6.1.4.1.2636.3.75.1.3.23 | ScalarjnxClksyncColorStr | accessible-for-notify | current | Color of the LED unit. |
| 1.3.6.1.4.1.2636.3.75.1.3.24 | ScalarjnxPtpPhaseOffsetThresholdExceeded | accessible-for-notify | current | Indicates whether the Phase Threshold of the monitored Passive Port has exceeded the configured Max Phase Offset Threshold as per Annex G of ITU-T G.8275.1 |
| 1.3.6.1.4.1.2636.3.75.1.3.25 | ScalarjnxPtpUtcOffset | accessible-for-notify | current | UTC Offset. |
| 1.3.6.1.4.1.2636.3.75.1.3.26 | ScalarjnxGpsRecvStatus | accessible-for-notify | current | Gps Receiver Status |
| 1.3.6.1.4.1.2636.3.75.1.3.27 | ScalarjnxPtpAdvClockClass | accessible-for-notify | current | UTC Offset. |
| 1.3.6.1.4.1.2636.3.75.1.3.28 | ScalarjnxClksyncSynceLockedIfIndex | accessible-for-notify | current | Snmp ifIndex of member interface. |
| 1.3.6.1.4.1.2636.3.75.1.3.29 | ScalarjnxClksyncSynceLockedIntfName | accessible-for-notify | current | Interface name. |
| 1.3.6.1.4.1.2636.3.75.1.3.30 | TablejnxClksyncSynceQualityTable | not-accessible | current | Synce Table to get Quality metrics for all configured sources |
| 1.3.6.1.4.1.2636.3.75.1.3.30.1 | RowjnxClksyncSynceQualityEntry | not-accessible | current | Synce Table to get Quality metrics for all configured sources |
| 1.3.6.1.4.1.2636.3.75.1.3.30.1.1 | ColumnjnxClksyncSynceQualityTableIndex | not-accessible | current | The index for each configured source, not displayed for get/walk |
| 1.3.6.1.4.1.2636.3.75.1.3.30.1.2 | ColumnjnxClksyncSynceQualityIntfName | read-only | current | The ifName of the configured source |
| 1.3.6.1.4.1.2636.3.75.1.3.30.1.3 | ColumnjnxClksyncSynceQualityValue | read-only | current | The Quality Level of the configured source |
| 1.3.6.1.4.1.2636.3.75.1.3.31 | ScalarjnxPtpUtcValid | accessible-for-notify | current | PTP UTC Offset Valid. |
| 1.3.6.1.4.1.2636.3.75.1.3.34 | ScalarjnxTimingFrequencyTraceability | accessible-for-notify | current | Frequency Traceable Flag. |
| 1.3.6.1.4.1.2636.3.75.1.3.35 | ScalarjnxTimingTimeTraceability | accessible-for-notify | current | Time Traceable Flag. |
| 1.3.6.1.4.1.2636.3.75.1.3.36 | TablejnxClksyncPtpOperationalMasterTable | not-accessible | current | PTP Operational Master Table displays the upstream clock details |
| 1.3.6.1.4.1.2636.3.75.1.3.36.1 | RowjnxClksyncPtpOperationalMasterEntry | not-accessible | current | PTP Operational Master Entrydisplays the upstream clock details |
| 1.3.6.1.4.1.2636.3.75.1.3.36.1.1 | ColumnjnxClksyncPtpOperationalMasterIndex | not-accessible | current | The index for each operational master, not displayed for get/walk |
| 1.3.6.1.4.1.2636.3.75.1.3.36.1.2 | ColumnjnxClksyncPtpOperationalMasterAttrIndex | not-accessible | current | The index for each attribute displayed for master, not displayed index not displayed for get/walk |
| 1.3.6.1.4.1.2636.3.75.1.3.36.1.3 | ColumnjnxClksyncPtpOperationalMasters | read-only | current | Attributes displayed for each master i.e ifl, localip, no_of_rem_clks and followed by remote ips |
| 1.3.6.1.4.1.2636.3.75.1.3.37 | TablejnxClksyncPtpOperationalSlaveTable | not-accessible | current | PTP Operational Slave Table displays the downstream clock details |
| 1.3.6.1.4.1.2636.3.75.1.3.37.1 | RowjnxClksyncPtpOperationalSlaveEntry | not-accessible | current | PTP Operational Slave Entry displays the downstream clock details |
| 1.3.6.1.4.1.2636.3.75.1.3.37.1.1 | ColumnjnxClksyncPtpOperationalSlaveIndex | not-accessible | current | The index for each operational slave, not displayed for get/walk |
| 1.3.6.1.4.1.2636.3.75.1.3.37.1.2 | ColumnjnxClksyncPtpOperationalSlaveAttrIndex | not-accessible | current | The index for each attribute displayed for master, not displayed index not displayed for get/walk |
| 1.3.6.1.4.1.2636.3.75.1.3.37.1.3 | ColumnjnxClksyncPtpOperationalSlaves | read-only | current | Attributes displayed for each slave i.e ifl, localip, no_of_rem_clks and followed by remote ips |
| 1.3.6.1.4.1.2636.3.75.1.3.38 | ScalarjnxClksyncAdditionalInformationStr | accessible-for-notify | current | Additional information in string format. |
| 1.3.6.1.4.1.2636.3.75.1.3.39 | ScalarjnxPtpPhaseErrorRelativeThreshold | accessible-for-notify | current | The currently configured phase-error-limit threshold |
| 1.3.6.1.4.1.2636.3.75.1.3.40 | ScalarjnxPtpPhaseMonitoringHoldoverLimit | accessible-for-notify | current | The currently configured phase-error-limit max holdover time |
| 1.3.6.1.4.1.2636.3.75.1.3.41 | ScalarjnxPtpPhaseMonitoringSynceHoldover | accessible-for-notify | current | If SyncE can go to holdover when phase-error-limit holdover occurs |
| 1.3.6.1.4.1.2636.3.75.1.3.42 | ScalarjnxPtpPhaseMonitoringPtpIntfName | accessible-for-notify | current | The PTP interface being monitored for the phase-error-limit feature |
| 1.3.6.1.4.1.2636.3.75.1.3.43 | ScalarjnxPtpPhaseMonitoringSynceIntfName | accessible-for-notify | current | The currently locked SyncE source while monitoring PTP for phase-error-limit feature, or previously locked if in SyncE holdover due to the feature. Not present… |
| 1.3.6.1.4.1.2636.3.75.1.3.44 | ScalarjnxPtpPhaseCorrection | accessible-for-notify | current | The ignored phase corrrection when holdover started due to the phase-error-limit feature |
| 1.3.6.1.4.1.2636.3.75.1.3.45 | ScalarjnxPtpPhaseMonitoringReason | accessible-for-notify | current | The reason for the occurrence of some phase-monitoring event |
| 1.3.6.1.4.1.2636.3.75.1.4 | NodejnxTimingConformance | |||
| 1.3.6.1.4.1.2636.3.75.1.4.1 | NodejnxTimingCompliances | |||
| 1.3.6.1.4.1.2636.3.75.1.4.1.1 | CompliancejnxTimingCompliance | current | The compliance statement for systems supporting the Timing Notification MIB. | |
| 1.3.6.1.4.1.2636.3.75.1.4.2 | NodejnxTimingGroups | |||
| 1.3.6.1.4.1.2636.3.75.1.4.2.1 | GroupjnxTimingObjectsGroup | current | Timing objects group. | |
| 1.3.6.1.4.1.2636.3.75.1.4.2.2 | GroupjnxTimingNotfnFaultsGroup | current | Timing defects notification group. | |
| 1.3.6.1.4.1.2636.3.75.1.4.2.3 | GroupjnxTimingNotfnEventsGroup | current | Timing events notification group. | |
| 1.3.6.1.4.1.2636.3.75.1.5 | NodejnxTimingPerformanceMonitor | |||
| 1.3.6.1.4.1.2636.3.75.1.5.1 | ScalarjnxPtpPerformanceMonitorEnabled | read-only | current | Indicates that performance monitor feature as per Annex J1 of IEEE 1588v2.1 (2019) is enabled or disabled. |
| 1.3.6.1.4.1.2636.3.75.1.5.2 | TablejnxPtpStatisticsTable | not-accessible | current | Performance monitor statistics table as per Annex J3 of IEEE 1588v2.1 (2019). |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1 | RowjnxPtpStatisticsTableEntry | not-accessible | current | Performance monitor statistics table entries. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.1 | ColumnjnxPtpStatisticsAttrIndex | not-accessible | current | The index for each performance monitor statistics data attribute: (1..96) represents 15 min counters; (97..98) represents 24 h counters. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.2 | ColumnjnxPtpStatisticsTimestamp | read-only | current | Timestamp of PTP slave port monitor statistics data. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.3 | ColumnjnxPtpStatisticsTxAnnounce | read-only | current | Counter indicating the number of Announce messages that have been transmitted for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.4 | ColumnjnxPtpStatisticsTxSync | read-only | current | Counter indicating the number of Sync messages that have been transmitted for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.5 | ColumnjnxPtpStatisticsTxDelayRequest | read-only | current | Counter indicating the number of Delay Request messages that have been transmitted for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.6 | ColumnjnxPtpStatisticsTxDelayResponse | read-only | current | Counter indicating the number of Delay Response messages that have been transmitted for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.7 | ColumnjnxPtpStatisticsTxFollowup | read-only | current | Counter indicating the number of Follow Up messages that have been transmitted for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.8 | ColumnjnxPtpStatisticsTxError | read-only | current | Counter indicating the number of Transmit Error messages that have been transmitted for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.9 | ColumnjnxPtpStatisticsAnnouncedFromAllForeignMasters | read-only | current | Counter indicating the total number of announce messages from the foreign Masters that have been received for each 15 min and 24 h interval as per Annex J3 of … |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.10 | ColumnjnxPtpStatisticsRxAnnounce | read-only | current | Counter indicating the number of Announce messages from the current GM that have been received for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.11 | ColumnjnxPtpStatisticsRxSync | read-only | current | Counter indicating the number of Sync messages that have been received for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.12 | ColumnjnxPtpStatisticsRxDelayRequest | read-only | current | Counter indicating the number of Delay Request messages that have been received for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.13 | ColumnjnxPtpStatisticsRxDelayResponse | read-only | current | Counter indicating the number of Delay Response messages that have been received for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.14 | ColumnjnxPtpStatisticsRxFollowup | read-only | current | Counter indicating the number of Follow Up messages that have been received for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.2.1.15 | ColumnjnxPtpStatisticsRxError | read-only | current | Counter indicating the number of Receive Error messages that have been received for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3 | TablejnxPtpPerformanceTable | not-accessible | current | Performance monitor table as per Annex J1 of IEEE 1588v2.1 (2019). |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1 | RowjnxPtpPerformanceEntry | not-accessible | current | PTP performance entry displays the performance monitor data details. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.1 | ColumnjnxPtpPerformanceAttrIndex | not-accessible | current | The index for each performance monitor attribute: (1..96) represents 15 min counters; (97..98) represents 24 h counters. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.2 | ColumnjnxPtpPerformanceIntfName | read-only | current | The interface name for ptp performance monitor data. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.3 | ColumnjnxPtpPerformanceSourcePortIdentity | read-only | current | Idenity of the source port associated with the performance monitor data. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.4 | ColumnjnxPtpPerformanceTimestamp | read-only | current | Timestamp of PTP slave port monitor measurement data. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.5 | ColumnjnxPtpPerformancePeriodComplete | read-only | current | Flag to represent if any data collected within a measurement window (15min or 24h) is partial as per IEEE 1588 2019 Annex J.4.1. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.6 | ColumnjnxPtpPerformanceDataValid | read-only | current | Validity of performance monitor data for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.7 | ColumnjnxPtpPerformanceDataInvalidReason | read-only | current | PTP slave port monitor measurement data (15min/24h) invalid reasons: 1) PTP servo sync state not phase aligned & Phy sync state not in sync. 2) PTP servo sync … |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.8 | ColumnjnxPtpPerformanceAverageMasterSlaveDelay | read-only | current | Average of the Master to Slave Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.9 | ColumnjnxPtpPerformanceMinMasterSlaveDelay | read-only | current | Minimum of the Master to Slave Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.10 | ColumnjnxPtpPerformanceMaxMasterSlaveDelay | read-only | current | Maximum of the Master to Slave Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.11 | ColumnjnxPtpPerformanceStdDevMasterSlaveDelay | read-only | current | Standard Deviation of the Master to Slave Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.12 | ColumnjnxPtpPerformanceAverageSlaveMasterDelay | read-only | current | Average of the Slave to Master Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.13 | ColumnjnxPtpPerformanceMinSlaveMasterDelay | read-only | current | Minimum of the Slave to Master Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.14 | ColumnjnxPtpPerformanceMaxSlaveMasterDelay | read-only | current | Maximum of the Slave to Master Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.15 | ColumnjnxPtpPerformanceStdDevSlaveMasterDelay | read-only | current | Standard Deviation of the Slave to Master Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.16 | ColumnjnxPtpPerformanceAverageMeanPathDelay | read-only | current | Average of the Mean Path Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.17 | ColumnjnxPtpPerformanceMinMeanPathDelay | read-only | current | Minimum of the Mean Path Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.18 | ColumnjnxPtpPerformanceMaxMeanPathDelay | read-only | current | Maximum of the Mean Path Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.19 | ColumnjnxPtpPerformanceStdDevMeanPathDelay | read-only | current | Standard Deviation of the Mean Path Delay for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.20 | ColumnjnxPtpPerformanceAverageOffsetFromMaster | read-only | current | Average of the Phase Offset From Master for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.21 | ColumnjnxPtpPerformanceMinOffsetFromMaster | read-only | current | Minimum of the Phase Offset From Master for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.22 | ColumnjnxPtpPerformanceMaxOffsetFromMaster | read-only | current | Maximum of the Phase Offset From Master for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.5.3.1.23 | ColumnjnxPtpPerformanceStdDevOffsetFromMaster | read-only | current | Stdandard Deviation of the Phase Offset From Master for each 15 min and 24 h interval. |
| 1.3.6.1.4.1.2636.3.75.1.6 | NodejnxTimingPassivePortMonitor | |||
| 1.3.6.1.4.1.2636.3.75.1.6.1 | ScalarjnxPtpPassivePortMonitorEnabled | read-only | current | Indicates that passive port monitor feature as per Annex G of ITU-T G.8275.1 is enabled or disabled. |
| 1.3.6.1.4.1.2636.3.75.1.6.2 | ScalarjnxPtpPassivePortMonitorDelayRequestInterval | read-only | current | Represents passive port monitor feature delay request interval as per Annex G of ITU-T G.8275.1. |
| 1.3.6.1.4.1.2636.3.75.1.6.3 | TablejnxPtpPassivePortMonitorTable | not-accessible | current | PTP passive port performance monitor table to get the passive port performance against the selected slave port. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1 | RowjnxPtpPassivePortMonitorEntry | not-accessible | current | PTP passive port performance monitor entry table to get the passive port performance against the selected slave port. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.1 | ColumnjnxPtpPassivePortMonitorIntfName | not-accessible | current | The interface name for PTP passive port data displayed for the stream. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.2 | ColumnjnxPtpPassivePortMonitorSourcePortIdentity | read-only | current | Identity of the source port to which PTP passive port data is associated. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.3 | ColumnjnxPtpPassivePortMonitorDataValid | read-only | current | This describes the validity of the data. If port state is passive and, passive port monitoring feature is enabled, then there is a valid measurement data avail… |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.4 | ColumnjnxPtpPassivePortMonitorStartTimestamp | read-only | current | Start Timestamp of PTP passive port monitor performance data. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.5 | ColumnjnxPtpPassivePortMonitorEndTimestamp | read-only | current | End Timestamp of PTP passive port monitor performance data. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.6 | ColumnjnxPtpPassivePortMonitorAveragePhaseOffsetFromMaster | read-only | current | Average Phase Offset value of the passive port from Master. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.7 | ColumnjnxPtpPassivePortMonitorMinPhaseOffsetFromMaster | read-only | current | Minimum Phase Offset value of the passive port from Master. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.8 | ColumnjnxPtpPassivePortMonitorMaxPhaseOffsetFromMaster | read-only | current | Maximum Phase Offset value of the passive port from Master. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.9 | ColumnjnxPtpPassivePortMonitorAverageMasterSlaveDelay | read-only | current | Average Master to Slave Delay value of the passive port from Master. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.10 | ColumnjnxPtpPassivePortMonitorMinMasterSlaveDelay | read-only | current | Minimum Master to Slave Delay value of the passive port from Master. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.11 | ColumnjnxPtpPassivePortMonitorMaxMasterSlaveDelay | read-only | current | Maximum Master to Slave Delay value of the passive port from Master. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.12 | ColumnjnxPtpPassivePortMonitorAverageSlaveMasterDelay | read-only | current | Average Slave to Master Delay value of the passive port from Master. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.13 | ColumnjnxPtpPassivePortMonitorMinSlaveMasterDelay | read-only | current | Minimum Slave to Master Delay value of the passive port from Master. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.14 | ColumnjnxPtpPassivePortMonitorMaxSlaveMasterDelay | read-only | current | Maximum Slave to Master Delay value of the passive port from Master. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.15 | ColumnjnxPtpPassivePortMonitorAveragePathDelay | read-only | current | Average Mean Path Delay of the passive port from Master. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.16 | ColumnjnxPtpPassivePortMonitorMaxPhaseOffsetThreshold | read-only | current | The configured Phase Offset threshold acceptable between the passive port and slave port. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.17 | ColumnjnxPtpPassivePortMonitorPhaseOffsetThresholdExceeded | read-only | current | Reflects the status as whether the passive port exceeded the configured Max offset threshold or not. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.18 | ColumnjnxPtpPassivePortMonitorPortConfig | read-only | current | Represents the current state of the configured passive port. |
| 1.3.6.1.4.1.2636.3.75.1.6.3.1.19 | ColumnjnxPtpPassivePortMonitorPortState | read-only | current | Represents the current state of the port. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JnxPtpClockIdTC | OCTET STRING (SIZE (8)) | current | Clock Identifier. |
| JnxPtpPhaseOffsetTC | Integer32 (0..1000) | current | Phase Offset. |