MIB Viewer

MICOM-4400-T1E1-MIB

161 objects
No module-level DESCRIPTION found.
Imported Objects
MICOM-OSCAR-MIBmicom-oscar
MICOM-SYS-MIBmcmSysAsciiTimeOfDay
RFC-1212OBJECT-TYPE
RFC-1215TRAP-TYPE
RFC1155-SMICounter
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.335.1.4.22Nodemicom-2t1e1
1.3.6.1.4.1.335.1.4.22.1Nodemcm4400T1NoCodeImageNAME = ; DESC = Indicates that the built image doesn't \ contain T1 code.\ Severity Level: MAJOR.; HELP = The Image loaded does not contain T1 code.\ Load a ne…
1.3.6.1.4.1.335.1.4.22.1Nodet1e1-r2-configuration
1.3.6.1.4.1.335.1.4.22.1.1Tablemcm4400t1e1LineCfgTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 Line Configuration table. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.1.1.1Rowmcm4400t1e1LineCfgEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 Line Configuration \ table. (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.1.1.1Columnmcm4400t1e1LineCfgLineIDread-onlymandatoryNAME = ; DESC = The T1/E1 line identification specifies which line \ is to be configured. Used as the index to the \ T1/E1 Line Configuration table. (Operation…
1.3.6.1.4.1.335.1.4.22.1.1.1.2Columnmcm4400t1e1LineCfgProfileNumread-writemandatoryNAME = ; DESC = The value of this object indicates the profile \ to be used to configure the specified T1/E1 \ line. (Operational); HELP = 1: expected as defau…
1.3.6.1.4.1.335.1.4.22.1.2Tablemcm4400t1e1ProfCfgTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 Profile Configuration table. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.1.2.1Rowmcm4400t1e1ProfCfgEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 Profile Configuration \ table. (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.2.1.1Columnmcm4400t1e1ProfCfgProfileNumread-onlymandatoryNAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the T1/E1 \ Profile Configuration table. (Operational); HELP = ; C…
1.3.6.1.4.1.335.1.4.22.1.2.1.2Columnmcm4400t1e1ProfCfgT1FrameFmtread-writemandatoryNAME = ; DESC = The value of this object specifies the T1 \ frame format used in the line. (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.2.1.3Columnmcm4400t1e1ProfCfgT1LineCoderead-writemandatoryNAME = ; DESC = The value of this object specifies the T1 \ coding format used in the line. (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.2.1.4Columnmcm4400t1e1ProfCfgE1LineCoderead-writemandatoryNAME = ; DESC = The value of this object specifies the E1 \ coding format used in the line. (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.2.1.5Columnmcm4400t1e1ProfCfgIdleCoderead-writemandatoryNAME = ; DESC = The value of this object specifies the code \ to be filled in the line when idle. (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.2.1.6Columnmcm4400t1e1ProfCfgT1LineBuildOutread-writemandatoryNAME = ; DESC = The value of this object specifies the cable \ length attached to a local T1 line. (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.2.1.7Columnmcm4400t1e1ProfCfgT1Loopbackread-writemandatoryNAME = ; DESC = The value of this object specifies whether \ to enable or disable the T1 line loopback \ to be invoked. (Operational); HELP = 1: expected as de…
1.3.6.1.4.1.335.1.4.22.1.2.1.8Columnmcm4400t1e1ProfCfgE1CRC4read-writemandatoryNAME = ; DESC = The value of this object specifies whether \ to enable or disable a T1 line CRC4. (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.2.1.9Columnmcm4400t1e1ProfCfgE1TS16Connread-writemandatoryNAME = ; DESC = The value of this object specifies where the \ TS16 goes (for a T1 line). (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.3Tablemcm4400t1e1DS0ChConnTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 DS0 Channel Connection \ Configuration table.(Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.1.3.1Rowmcm4400t1e1DS0ChConnEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 DS0 Channel \ Connection Configuration table. (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.3.1.1Columnmcm4400t1e1DS0ChConnLineIDread-onlymandatoryNAME = ; DESC = The T1/E1 line identification specifies which line \ is to be configured. Used as an index to the \ T1/E1 DS0 Channel Connection Configuration …
1.3.6.1.4.1.335.1.4.22.1.3.1.2Columnmcm4400t1e1DS0ChConnDS0Indexread-onlymandatoryNAME = ; DESC = The T1/E1 DS0 index specifies which time slot \ is to be connected. Used as an index to the \ T1/E1 DS0 Channel Connection Configuration \ tabl…
1.3.6.1.4.1.335.1.4.22.1.3.1.3Columnmcm4400t1e1DS0ChConnStateread-writemandatoryNAME = ; DESC = The value of this object specifies where the \ T1/E1 line channel slot (DS0) is to be connected \ to. (Operational); HELP = Note 1: if 2-37 is …
1.3.6.1.4.1.335.1.4.22.1.4Tablemcm4400t1e1DPCfgTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 Data Port Configuration table. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.1.4.1Rowmcm4400t1e1DPCfgEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 Data Port \ Configuration table. (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.4.1.1Columnmcm4400t1e1DPCfgPortNumread-onlymandatoryNAME = ; DESC = The T1/E1 port number specifies which data port \ is to be configured. Used as an index to the \ T1/E1 Data Port Configuration table. (Operatio…
1.3.6.1.4.1.335.1.4.22.1.4.1.2Columnmcm4400t1e1DPCfgDataRateread-writemandatoryNAME = ; DESC = The value of this object selects the baud rate \ for the specified data port. (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.4.1.3Columnmcm4400t1e1DPCfgClockread-writemandatoryNAME = ; DESC = The value of this object selects the clock \ source for the specified data port. \ (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.4.1.4Columnmcm4400t1e1DPCfgDTRCntlread-writemandatoryNAME = ; DESC = The value of this object selects the DTR \ control for the specified data port. \ (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.4.1.5Columnmcm4400t1e1DPCfgRTSCntlread-writemandatoryNAME = ; DESC = The value of this object selects the RTS \ control for the specified data port. \ (Operational); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.5Scalarmcm4400t1e1SysCfgClockSourceread-writemandatoryNAME = ; DESC = The value of this object specifies where the \ system clock comes from. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.1.6Tablenvm4400t1e1LineCfgTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 Line Configuration table. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.1.6.1Rownvm4400t1e1LineCfgEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 Line Configuration \ table. (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.6.1.1Columnnvm4400t1e1LineCfgLineIDread-onlymandatoryNAME = ; DESC = The T1/E1 line identification specifies which line \ is to be configured. Used as the index to the \ T1/E1 Line Configuration table. (Configura…
1.3.6.1.4.1.335.1.4.22.1.6.1.2Columnnvm4400t1e1LineCfgProfileNumread-onlymandatoryNAME = ; DESC = The value of this object indicates the profile \ to be used to configure the specified T1/E1 \ line. (Configuration); HELP = 1: expected as def…
1.3.6.1.4.1.335.1.4.22.1.7Tablenvm4400t1e1ProfCfgTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 Profile Configuration table. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.1.7.1Rownvm4400t1e1ProfCfgEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 Profile Configuration \ table. (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.7.1.1Columnnvm4400t1e1ProfCfgProfileNumread-onlymandatoryNAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the T1/E1 \ Profile Configuration table. (Configuration); HELP = ;…
1.3.6.1.4.1.335.1.4.22.1.7.1.2Columnnvm4400t1e1ProfCfgT1FrameFmtread-onlymandatoryNAME = ; DESC = The value of this object specifies the T1 \ frame format used in the line. (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.7.1.3Columnnvm4400t1e1ProfCfgT1LineCoderead-onlymandatoryNAME = ; DESC = The value of this object specifies the T1 \ coding format used in the line. (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.7.1.4Columnnvm4400t1e1ProfCfgE1LineCoderead-onlymandatoryNAME = ; DESC = The value of this object specifies the E1 \ coding format used in the line. (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.7.1.5Columnnvm4400t1e1ProfCfgIdleCoderead-onlymandatoryNAME = ; DESC = The value of this object specifies the code \ to be filled in the line when idle. (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.7.1.6Columnnvm4400t1e1ProfCfgT1LineBuildOutread-onlymandatoryNAME = ; DESC = The value of this object specifies the cable \ length attached to a local T1 line. (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.7.1.7Columnnvm4400t1e1ProfCfgT1Loopbackread-onlymandatoryNAME = ; DESC = The value of this object specifies whether \ to enable or disable the T1 line loopback \ to be invoked. (Configuration); HELP = 1: expected as …
1.3.6.1.4.1.335.1.4.22.1.7.1.8Columnnvm4400t1e1ProfCfgE1CRC4read-onlymandatoryNAME = ; DESC = The value of this object specifies whether \ to enable or disable a T1 line CRC4. (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.7.1.9Columnnvm4400t1e1ProfCfgE1TS16Connread-onlymandatoryNAME = ; DESC = The value of this object specifies where the \ TS16 goes (for a T1 line). (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.8Tablenvm4400t1e1DS0ChConnTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 DS0 Channel Connection \ Configuration table.(Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.1.8.1Rownvm4400t1e1DS0ChConnEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 DS0 Channel \ Connection Configuration table. (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.8.1.1Columnnvm4400t1e1DS0ChConnLineIDread-onlymandatoryNAME = ; DESC = The T1/E1 line identification specifies which line \ is to be configured. Used as an index to the \ T1/E1 DS0 Channel Connection Configuration …
1.3.6.1.4.1.335.1.4.22.1.8.1.2Columnnvm4400t1e1DS0ChConnDS0Indexread-onlymandatoryNAME = ; DESC = The T1/E1 DS0 index specifies which time slot \ is to be connected. Used as an index to the \ T1/E1 DS0 Channel Connection Configuration \ tabl…
1.3.6.1.4.1.335.1.4.22.1.8.1.3Columnnvm4400t1e1DS0ChConnStateread-onlymandatoryNAME = ; DESC = The value of this object specifies where the \ T1/E1 line channel slot (DS0) is to be connected \ to. (Configuration); HELP = Note 1: if 2-37 i…
1.3.6.1.4.1.335.1.4.22.1.9Tablenvm4400t1e1DPCfgTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 Data Port Configuration table. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.1.9.1Rownvm4400t1e1DPCfgEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 Data Port \ Configuration table. (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.9.1.1Columnnvm4400t1e1DPCfgPortNumread-onlymandatoryNAME = ; DESC = The T1/E1 port number specifies which data port \ is to be configured. Used as an index to the \ T1/E1 Data Port Configuration table. (Configur…
1.3.6.1.4.1.335.1.4.22.1.9.1.2Columnnvm4400t1e1DPCfgDataRateread-onlymandatoryNAME = ; DESC = The value of this object selects the baud rate \ for the specified data port. (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.9.1.3Columnnvm4400t1e1DPCfgClockread-onlymandatoryNAME = ; DESC = The value of this object selects the clock \ source for the specified data port. \ (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.9.1.4Columnnvm4400t1e1DPCfgDTRCntlread-onlymandatoryNAME = ; DESC = The value of this object selects the DTR \ control for the specified data port. \ (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.9.1.5Columnnvm4400t1e1DPCfgRTSCntlread-onlymandatoryNAME = ; DESC = The value of this object selects the RTS \ control for the specified data port. \ (Configuration); HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.1.10Scalarnvm4400t1e1SysCfgClockSourceread-onlymandatoryNAME = ; DESC = The value of this object specifies where the \ system clock comes from. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.2Nodemcm4400T1DownloadFailNAME = ; DESC = Indicates a failure occurred during the T1 \ code download.\ Severity Level: MAJOR; HELP = Retry the download. Re-boot the access device and \ …
1.3.6.1.4.1.335.1.4.22.2Nodet1e1-r2-control
1.3.6.1.4.1.335.1.4.22.2.1Tablemcm4400t1e1DS0ChTestCmdTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 DS0 Channel Test Command \ table. \ HELP = ; CAPABILITIES = NET_OPER, VPN_OPER ;
1.3.6.1.4.1.335.1.4.22.2.1.1Rowmcm4400t1e1DS0ChTestCmdEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 DS0 Channel \ Test Command table.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.2.1.1.1Columnmcm4400t1e1DS0ChTestCmdLineIDread-onlymandatoryNAME = ; DESC = The T1/E1 line ID specifies which line is to \ be tested. Used as an index to the \ T1/E1 DS0 Channel Test Command table.; HELP = ; CAPABILITIE…
1.3.6.1.4.1.335.1.4.22.2.1.1.2Columnmcm4400t1e1DS0ChTestCmdDS0Indexread-onlymandatoryNAME = ; DESC = The DS0 Index specifies which time slot is \ to be tested. Used as an index to the \ T1/E1 DS0 Channel Test Command table.; HELP = For T1, 24 i…
1.3.6.1.4.1.335.1.4.22.2.1.1.3Columnmcm4400t1e1DS0ChTestCmdTstPatternwrite-onlymandatoryNAME = ; DESC = Setting this object will initiate various \ test pattern testing on the specified T1/E1 \ DS0 channel.; HELP = For QRSS, TP511, and Fixed, the …
1.3.6.1.4.1.335.1.4.22.2.2Tablemcm4400t1e1LineTestCmdTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 Line Test Command \ table. \ HELP = ; CAPABILITIES = NET_OPER, VPN_OPER ;
1.3.6.1.4.1.335.1.4.22.2.2.1Rowmcm4400t1e1LineTestCmdEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 Line Test \ Command table.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.2.2.1.1Columnmcm4400t1e1LineTestCmdLineIDread-onlymandatoryNAME = ; DESC = The T1/E1 line ID specifies which line is to \ be tested. Used as the index to the \ T1/E1 Line Test Command table.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.2.2.1.2Columnmcm4400t1e1LineTestCmdTstPatternwrite-onlymandatoryNAME = ; DESC = Setting this object will initiate various \ tests on the specified T1/E1 line.; HELP = Line Loopback: receiver or transmitter is \ connected to…
1.3.6.1.4.1.335.1.4.22.2.3Tablemcm4400t1e1DPTestCmdTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 Data Port Test Command \ table. \ HELP = ; CAPABILITIES = NET_OPER, VPN_OPER ;
1.3.6.1.4.1.335.1.4.22.2.3.1Rowmcm4400t1e1DPTestCmdEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 Data Port \ Test Command table.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.2.3.1.1Columnmcm4400t1e1DPTestCmdPortNumread-onlymandatoryNAME = ; DESC = The T1/E1 Port Number specifies which data \ port is to be tested. Used as the index to the \ T1/E1 Data Port Test Command table.; HELP = ; CAP…
1.3.6.1.4.1.335.1.4.22.2.3.1.2Columnmcm4400t1e1DPTestCmdTstPatternwrite-onlymandatoryNAME = ; DESC = Setting this object will initiate various \ tests on the specified T1/E1 data port.; HELP = External: loop back data coming from the \ device a…
1.3.6.1.4.1.335.1.4.22.2.4Scalarmcm4400t1e1SysControlActionCmdwrite-onlymandatoryNAME = ; DESC = Setting this object will perform various \ actions on the T1/E1 system. \ Note: Starting with software release 3.0, \ the enumeration clearCoun…
1.3.6.1.4.1.335.1.4.22.3Nodemcm4400T1OutOfOrderNAME = ; DESC = Indicates the T1 is not responding.\ Severity Level: CRITICAL.; HELP = Management frame is out of order. Check for \ Framing error. If it does …
1.3.6.1.4.1.335.1.4.22.3Nodet1e1-r2-status
1.3.6.1.4.1.335.1.4.22.3.1Tablemcm4400t1e1LineStatusTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 Line Status Display table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.3.1.1Rowmcm4400t1e1LineStatusEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 Line Status Display \ table.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.1.1.1Columnmcm4400t1e1LineStatusLineIndexread-onlymandatoryNAME = ; DESC = The T1/E1 line index specifies which line is to \ be displayed. Used as an index to the \ T1/E1 Line Status Display table.; HELP = ; CAPABILITI…
1.3.6.1.4.1.335.1.4.22.3.1.1.2Columnmcm4400t1e1LineStatusInterfaceread-onlymandatoryNAME = ; DESC = The value of this object indicates the interface \ type as either T1 or E1 for the \ T1/E1 Line Status Display table.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.1.1.3Columnmcm4400t1e1LineStatusImpedanceread-onlymandatoryNAME = ; DESC = The value of this object indicates the impedance \ for the specified line.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.1.1.4Columnmcm4400t1e1LineStatusTestModeread-onlymandatoryNAME = ; DESC = The value of this object indicates if the specified \ line is in a loopback test mode.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.1.1.5Columnmcm4400t1e1LineStatusTestingDS0Chread-onlymandatoryNAME = ; DESC = The value of this object indicates which DS0 \ channel is in channel loopback or channel pattern \ test mode now.; HELP = 0: none.\ 1-30: DS0 c…
1.3.6.1.4.1.335.1.4.22.3.1.1.6Columnmcm4400t1e1LineStatusAISAlarmread-onlymandatoryNAME = ; DESC = The value of this object indicates if the AIS \ (Alarm Indication Signal) alarm is preset for \ the specified line.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.1.1.7Columnmcm4400t1e1LineStatusRedAlarmread-onlymandatoryNAME = ; DESC = The value of this object indicates if the Red \ alarm is preset for the specified line.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.1.1.8Columnmcm4400t1e1LineStatusYellowAlarmread-onlymandatoryNAME = ; DESC = The value of this object indicates if the Yellow \ alarm is preset for the specified line. (Not \ applicable in E1.) ; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.1.1.9Columnmcm4400t1e1LineStatusTS16AISread-onlymandatoryNAME = ; DESC = The value of this object indicates if the TS16 \ (Time Slot 16) AIS alarm is preset for the \ specified line. (Not applicable in T1.) ; HELP = …
1.3.6.1.4.1.335.1.4.22.3.1.1.10Columnmcm4400t1e1LineStatusOOSMFAlarmread-onlymandatoryNAME = ; DESC = The value of this object indicates if the \ OOSMF (Out Of Signal Multi-Frame) alarm \ is preset for the specified line. (Not \ applicable in T1…
1.3.6.1.4.1.335.1.4.22.3.1.1.11Columnmcm4400t1e1LineStatusMFASAlarmread-onlymandatoryNAME = ; DESC = The value of this object indicates if the \ MFAS (Multi-Frame Alignment Signal - \ Y bit) alarm is preset for the specified line. \ (Not applic…
1.3.6.1.4.1.335.1.4.22.3.1.1.12Columnmcm4400t1e1LineStatusFASAlarmread-onlymandatoryNAME = ; DESC = The value of this object indicates if the \ FAS (Frame Alignment Signal - A bit) \ alarm is preset for the specified line. \ (Not applicable in…
1.3.6.1.4.1.335.1.4.22.3.1.1.13Columnmcm4400t1e1LineStatusOOCMFAlarmread-onlymandatoryNAME = ; DESC = The value of this object indicates if the \ OOCMF (Out Of CRC Multi-Frame) \ alarm is preset for the specified line. \ (Not applicable in T1.) …
1.3.6.1.4.1.335.1.4.22.3.2Nodemcm4400t1e1SysStatusGroup
1.3.6.1.4.1.335.1.4.22.3.2.1Scalarmcm4400t1e1SysStatusCardTyperead-onlymandatoryNAME = ; DESC = The value of this object indicates the T1/E1 \ card type.; HELP = 1: TAM1 - network line only. \ 2: TAM2 - both local and network lines. \ 3: E…
1.3.6.1.4.1.335.1.4.22.3.2.2Scalarmcm4400t1e1SysStatusOperStatusread-onlymandatoryNAME = ; DESC = The value of this object indicates the operation \ status of the T1/E1 control unit.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
1.3.6.1.4.1.335.1.4.22.3.2.3Scalarmcm4400t1e1SysStatusLEDTestread-onlymandatoryNAME = ; DESC = The value of this object specifies if the \ LED test is in progress.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
1.3.6.1.4.1.335.1.4.22.3.2.4Scalarmcm4400t1e1SysStatusSelfTestResultsread-onlymandatoryNAME = ; DESC = The value of this object specifies the \ results of the T1/E1 self test.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
1.3.6.1.4.1.335.1.4.22.3.2.5Scalarmcm4400t1e1SysStatusFlashEPROMStread-onlymandatoryNAME = ; DESC = The value of this object specifies the current \ state of the flash EPROM in the T1/E1 \ access board.; HELP = ; CAPABILITIES = NET_CFG, VPN_CF…
1.3.6.1.4.1.335.1.4.22.3.2.6Scalarmcm4400t1e1SysStatusApplSwIDread-onlymandatoryNAME = ; DESC = The value of this object indicates the T1/E1 \ application software ID (Null terminated string).; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
1.3.6.1.4.1.335.1.4.22.3.2.7Scalarmcm4400t1e1SysStatusBootSwVerread-onlymandatoryNAME = ; DESC = The value of this object indicates the T1/E1 \ software version (Null terminated string).; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;
1.3.6.1.4.1.335.1.4.22.3.3Tablemcm4400t1e1DPStatusTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 Data Port Status Display table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.3.3.1Rowmcm4400t1e1DPStatusEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 Data Port Status \ Display table.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.3.1.1Columnmcm4400t1e1DPStatusPortNumberread-onlymandatoryNAME = ; DESC = The value of this object specifies the data port \ number. Used as the index to the T1/E1 \ Data Port Status Display table.; HELP = ; CAPABILIT…
1.3.6.1.4.1.335.1.4.22.3.3.1.2Columnmcm4400t1e1DPStatusDTRInputStread-onlymandatoryNAME = ; DESC = The value of this object indicates the current \ DTR state for the specified data port.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.3.1.3Columnmcm4400t1e1DPStatusRTSInputStread-onlymandatoryNAME = ; DESC = The value of this object indicates the current \ RTS state for the specified data port.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.3.1.4Columnmcm4400t1e1DPStatusDSROutputStread-onlymandatoryNAME = ; DESC = The value of this object indicates the current \ DSR state for the specified data port.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.3.1.5Columnmcm4400t1e1DPStatusDCDOutputStread-onlymandatoryNAME = ; DESC = The value of this object indicates the current \ DCD state for the specified data port.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.3.1.6Columnmcm4400t1e1DPStatusCTSOutputStread-onlymandatoryNAME = ; DESC = The value of this object indicates the current \ CTS state for the specified data port.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.4Tablemcm4400t1e1DS0ChSigTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 DS0 Channel Signaling Display \ table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.3.4.1Rowmcm4400t1e1DS0ChSigEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 DS0 Channel \ Signaling Display table.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.4.1.1Columnmcm4400t1e1DS0ChSigLineIDread-onlymandatoryNAME = ; DESC = The T1/E1 line ID specifies which line is to \ be displayed. Used as an index to the \ T1/E1 DS0 Channel Signaling Display table.; HELP = ; CAP…
1.3.6.1.4.1.335.1.4.22.3.4.1.2Columnmcm4400t1e1DS0ChSigDS0Indexread-onlymandatoryNAME = ; DESC = The DS0 Index specifies which time slot is \ to be displayed. Used as an index to the \ T1/E1 DS0 Channel Signaling Display table.; HELP = For …
1.3.6.1.4.1.335.1.4.22.3.4.1.3Columnmcm4400t1e1DS0ChSigInABCDBitsread-onlymandatoryNAME = ; DESC = The value of this object indicates the input \ ABCD bit pattern.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.4.1.4Columnmcm4400t1e1DS0ChSigOutABCDBitsread-onlymandatoryNAME = ; DESC = The value of this object indicates the output \ ABCD bit pattern.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.3.5Nodemcm4400t1e1ChTestResultsGroup
1.3.6.1.4.1.335.1.4.22.3.5.1Scalarmcm4400t1e1ChTestResultsLineIDread-onlymandatoryNAME = ; DESC = The line ID specifies which T1/E1 line has \ a DS0channel in test mode.; HELP = 3 is returned if no DS0 channel is in test mode.; CAPABILITIES …
1.3.6.1.4.1.335.1.4.22.3.5.2Scalarmcm4400t1e1ChTestResultsDS0Chread-onlymandatoryNAME = ; DESC = The value of this object specifies which DS0 \ channel is in test mode.; HELP = For T1, 24 is the maximum. Also, 0 will be \ returned if no DS0…
1.3.6.1.4.1.335.1.4.22.3.5.3Scalarmcm4400t1e1ChTestResultsErrorCntread-onlymandatoryNAME = ; DESC = The value of this object indicates the number \ of errors accumulated since the test had been \ started.; HELP = An error can be detected only …
1.3.6.1.4.1.335.1.4.22.4Nodemcm4400T1OutOfOrderRecoveredNAME = ; DESC = Indicates recovery from the T1 out of order condition.\ Severity Level: INFORMATIVE.; HELP = T1 is responding. Normal Status Indicator.;
1.3.6.1.4.1.335.1.4.22.4Nodet1e1-r2-statistics
1.3.6.1.4.1.335.1.4.22.4.1Tablemcm4400t1e1LineStatsTablenot-accessiblemandatoryNAME = ; DESC = The T1/E1 Line Statistics Display table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
1.3.6.1.4.1.335.1.4.22.4.1.1Rowmcm4400t1e1LineStatsEntrynot-accessiblemandatoryNAME = ; DESC = An entry in the T1/E1 Line Statistics \ Display table.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.4.1.1.1Columnmcm4400t1e1LineStatsLineIndexread-onlymandatoryNAME = ; DESC = The T1/E1 line index specifies which line is to \ be displayed. Used as an index to the \ T1/E1 Line Statistics Display table.; HELP = ; CAPABI…
1.3.6.1.4.1.335.1.4.22.4.1.1.2Columnmcm4400t1e1LineStatsInterfaceread-onlymandatoryNAME = ; DESC = The value of this object indicates the interface \ type as either T1 or E1 for the \ T1/E1 Line Statistics Display table.; HELP = ; CAPABILITIE…
1.3.6.1.4.1.335.1.4.22.4.1.1.3Columnmcm4400t1e1LineStatsFramingBitErrorread-onlymandatoryNAME = ; DESC = The value of this object indicates the framing \ bit errors on the specified line.; HELP = Valid for E1 only. For T1, 0 will be returned.; CAPA…
1.3.6.1.4.1.335.1.4.22.4.1.1.4Columnmcm4400t1e1LineStatsLineCdViolationread-onlymandatoryNAME = ; DESC = The value of this object indicates the line \ code violations on the specified line.; HELP = ; CAPABILITIES = ;
1.3.6.1.4.1.335.1.4.22.4.1.1.5Columnmcm4400t1e1LineStatsFarEndBlkErrorread-onlymandatoryNAME = ; DESC = The value of this object indicates the far \ end block errors on the specified line.; HELP = Valid for E1 only. For T1, 0 will be returned.; CA…
1.3.6.1.4.1.335.1.4.22.4.1.1.6Columnmcm4400t1e1LineStatsCRCErrorread-onlymandatoryNAME = ; DESC = The value of this object indicates the CRC \ errors on the specified line.; HELP = Valid for E1 only. For T1, 0 will be returned.; CAPABILITIES…
1.3.6.1.4.1.335.1.4.22.4.1.1.7Columnmcm4400t1e1LineStatsBufferOverrunread-onlymandatoryNAME = ; DESC = The value of this object indicates the \ buffer overruns on the specified line.; HELP = Valid for E1 only. For T1, 0 will be returned.; CAPABIL…
1.3.6.1.4.1.335.1.4.22.4.1.1.8Columnmcm4400t1e1LineStatsBufferUnderrunread-onlymandatoryNAME = ; DESC = The value of this object indicates the \ buffer underruns on the specified line.; HELP = Valid for E1 only. For T1, 0 will be returned.; CAPABI…
1.3.6.1.4.1.335.1.4.22.4.1.1.9Columnmcm4400t1e1LineStatsFrmSyncBitErrorread-onlymandatoryNAME = ; DESC = The value of this object indicates the frame \ synchronization bit errors on the specified line.; HELP = Valid for T1 only. For E1, 0 will be r…
1.3.6.1.4.1.335.1.4.22.4.1.1.10Columnmcm4400t1e1LineStatsOutOfFrameread-onlymandatoryNAME = ; DESC = The value of this object indicates the out of \ frame statistics on the specified line.; HELP = Valid for T1 only. For E1, 0 will be returned.;…
1.3.6.1.4.1.335.1.4.22.4.1.1.11Columnmcm4400t1e1LineStatsTotalFrameSlipread-onlymandatoryNAME = ; DESC = The value of this object indicates the total \ frame slips on the specified line.; HELP = Valid for T1 only. For E1, 0 will be returned.; CAPAB…
1.3.6.1.4.1.335.1.4.22.5Nodemcm4400T1FailToSyncUpNAME = ; DESC = Indicates the T1 is unable to sync up.\ Severity Level : CRITICAL.; HELP = Check the physical connection locally, and \ to the remote device. P…
1.3.6.1.4.1.335.1.4.22.6Nodemcm4400T1FailToSyncUpRecoveredNAME = ; DESC = Indicates recovery from the T1 failure \ to sync up condition.\ Severity Level: INFORMATIVE.; HELP = T1 has recovered. Normal Status Indicator.;
1.3.6.1.4.1.335.1.4.22.7Nodemcm4400T1AISAlarmSetNAME = ; DESC = Indicates a T1 AIS Alarm condition is present.\ Severity Level: CRITICAL.; HELP = Check physical link of the local T1, and the Remote \ PBX. Po…
1.3.6.1.4.1.335.1.4.22.8Nodemcm4400T1AISAlarmClearNAME = ; DESC = Indicates a T1 AIS Alarm condition has cleared.\ Severity Level: INFORMATIVE.; HELP = T1 AIS Alarm is cleared. Normal Status Indicator.;
1.3.6.1.4.1.335.1.4.22.9Nodemcm4400T1RedAlarmSetNAME = ; DESC = Indicates a T1 Red Alarm condition is present.\ Severity Level: CRITICAL.; HELP = Check the Physical Connection to remote. \ If the Alarm condi…
1.3.6.1.4.1.335.1.4.22.10Nodemcm4400T1RedAlarmClearNAME = ; DESC = Indicates a T1 Red Alarm condition has cleared.\ Severity Level: IMFORMATIVE. ; HELP = Red Alarm Cleared. Normal Status Indicator!.;
1.3.6.1.4.1.335.1.4.22.11Nodemcm4400T1YellowAlarmSetNAME = ; DESC = Indicates a T1 Yellow Alarm condition is present.\ Severity Level: MINOR.; HELP = TX or RX side for physical connection may be faulty; \ Possib…
1.3.6.1.4.1.335.1.4.22.12Nodemcm4400T1YellowAlarmClearNAME = ; DESC = Indicates a T1 Yellow Alarm condition has cleared.\ Severity Level: INFORMATIVE.; HELP = Yellow Alarm is cleared. Normal Status Indicator!.;
1.3.6.1.4.1.335.1.4.22.13Nodemcm4400E1NoCodeImageNAME = ; DESC = Indicates that the built image doesn't \ contain E1 code.\ Severity Level: MAJOR.; HELP = The Image loaded does not contain E1 code.\ Load a ne…
1.3.6.1.4.1.335.1.4.22.14Nodemcm4400E1DownloadFailNAME = ; DESC = Indicates a failure occurred during the E1 \ code download.\ Severity Level: MAJOR. ; HELP = Retry the download. Re-boot the access device and …
1.3.6.1.4.1.335.1.4.22.15Nodemcm4400E1OutOfOrderNAME = ; DESC = Indicates the E1 is not responding.\ Severity Level: CRITICAL.; HELP = Management frame is out of order. Check for \ Framing error. If it does …
1.3.6.1.4.1.335.1.4.22.16Nodemcm4400E1OutOfOrderRecoveredNAME = ; DESC = Indicates recovery from the E1 out of order condition.\ Severity Level: INFORMATIVE.; HELP = E1 is responding. Normal Status Indicator.;
1.3.6.1.4.1.335.1.4.22.17Nodemcm4400E1FailToSyncUpNAME = ; DESC = Indicates the E1 is unable to sync up.\ Severity Level: CRITICAL.; HELP = Check the physical connection locally, and \ to the remote device. Po…
1.3.6.1.4.1.335.1.4.22.18Nodemcm4400E1FailToSyncUpRecoveredNAME = ; DESC = Indicates recovery from the E1 failure \ to sync up condition.\ Severity Level: INFORMATIVE.; HELP = E1 has recovered. Normal Status Indicator.;
1.3.6.1.4.1.335.1.4.22.19Nodemcm4400E1AISAlarmSetNAME = ; DESC = Indicates an E1 AIS Alarm condition is present.\ Severity Level: MAJOR.; HELP = Check physical link of the local E1, and the Remote \ PBX. Poss…
1.3.6.1.4.1.335.1.4.22.20Nodemcm4400E1AISAlarmClearNAME = ; DESC = Indicates an E1 AIS Alarm condition has cleared.\ Severity Level: INFORMATIVE. ; HELP = E1 AIS Alarm is cleared. Normal Status Indicator.;
1.3.6.1.4.1.335.1.4.22.21Nodemcm4400E1RedAlarmSetNAME = ; DESC = Indicates an E1 Red Alarm condition is present.\ Severity Level: MAJOR.; HELP = Check the Physical Connection to remote. \ Run a loopback test …
1.3.6.1.4.1.335.1.4.22.22Nodemcm4400E1RedAlarmClearNAME = ; DESC = Indicates an E1 Red Alarm condition has cleared.\ Severity Level: INFORMATIVE.; HELP = Red Alarm Cleared. Normal Status Indicator!.;
1.3.6.1.4.1.335.1.4.22.23Nodemcm4400E1TS16AISAlarmSetNAME = ; DESC = Indicates an E1 TS16 AIS Alarm is present.\ Severity Level: MAJOR.; HELP = TX or RX side for physical connection may be faulty; \ Possible Fram…
1.3.6.1.4.1.335.1.4.22.24Nodemcm4400E1TS16AISAlarmClearNAME = ; DESC = Indicates an E1 TS16 AIS Alarm has cleared.\ Severity Level: INFORMATIVE.; HELP = Alarm is cleared. Normal Status Indicator!.;
1.3.6.1.4.1.335.1.4.22.25Nodemcm4400E1OOSMFAlarmSetNAME = ; DESC = Indicates an E1 00SMF Alarm is present.\ Severity Level: MAJOR.; HELP = Framing error due to signal loss. Run Loopback \ test and determine the…
1.3.6.1.4.1.335.1.4.22.26Nodemcm4400E1OOSMFAlarmClearNAME = ; DESC = Indicates an E1 00SMF Alarm has cleared.\ Severity Level: INFORMATIVE.; HELP = OOSMF Alarm is cleared. Normal Status Indicator!.;
1.3.6.1.4.1.335.1.4.22.27Nodemcm4400E1RemoteYBitAlarmSetNAME = ; DESC = Indicates an E1 Remote Y Bit Alarm is present.\ Severity Level: MAJOR.; HELP = Run Loopback test, and determine the condition. \ For further he…
1.3.6.1.4.1.335.1.4.22.28Nodemcm4400E1RemoteYBitAlarmClearNAME = ; DESC = Indicates an E1 Remote Y Bit Alarm has cleared.\ Severity Level: INFORMATIVE.; HELP = Remote YBit Alarm is cleared. Normal Status \ Indicator.;
1.3.6.1.4.1.335.1.4.22.29Nodemcm4400E1RemoteABitAlarmSetNAME = ; DESC = Indicates an E1 Remote A Bit Alarm is present.\ Severity Level: MAJOR.; HELP = Possible frame Error. Please run loopback test \ and determine t…
1.3.6.1.4.1.335.1.4.22.30Nodemcm4400E1RemoteABitAlarmClearNAME = ; DESC = Indicates an E1 Remote Y Bit Alarm has cleared.\ Severity Level: INFORMATIVE.; HELP = Alarm is cleared. Normal Status Indicator!.;
1.3.6.1.4.1.335.1.4.22.31Nodemcm4400E1OOCMFAlarmSetNAME = ; DESC = Indicates an E1 00CMF Alarm is present.\ Severity Level: MAJOR.; HELP = CRC multframe alignment is lost. Run loobback \ test and determine the …
1.3.6.1.4.1.335.1.4.22.32Nodemcm4400E1OOCMFAlarmClearNAME = ; DESC = Indicates an E1 00CMF Alarm has cleared.\ Severity Level: INFORMATIVE.; HELP = OOCMF Alarm is cleared. Normal Status Indicator.;