MICOM-4400-VOICE-NETWORK-MIB
216 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.335.1.4.21 | Nodemicom-2vnet | |||
| 1.3.6.1.4.1.335.1.4.21.1 | NodemcmVNETDownloadFail | NAME = ; DESC = Indicates that a failure occurred while \ downloading the voice image.\ Severity Level: MAJOR.; HELP = Downloading the voice image failed. Retr… | ||
| 1.3.6.1.4.1.335.1.4.21.1 | Nodevnet-configuration | |||
| 1.3.6.1.4.1.335.1.4.21.1.1 | TablemcmVNETChCfgTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Channel Configuration table. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.1.1.1 | RowmcmVNETChCfgEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Channel Configuration \ table. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.1.1.1 | ColumnmcmVNETChCfgLimID | read-only | mandatory | NAME = ; DESC = The card lim (logical interface module) number of a \ particular voice channel. Used as an index to the \ VNET Voice Channel Configuration tabl… |
| 1.3.6.1.4.1.335.1.4.21.1.1.1.2 | ColumnmcmVNETChCfgChannelID | read-only | mandatory | NAME = ; DESC = The position of the voice channel in the lim. \ Used as an index to the VNET Voice \ Channel Configuration table. (Operational); HELP = ; CAPAB… |
| 1.3.6.1.4.1.335.1.4.21.1.1.1.3 | ColumnmcmVNETChCfgVoiceProfile | read-write | mandatory | NAME = ; DESC = The value of this object indicates the profile \ to be used to configure the specified voice \ channel. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.1.1.4 | ColumnmcmVNETChCfgSwitchingProfile | read-write | mandatory | NAME = ; DESC = The value of this object indicates the profile \ to be used for a switching call. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.1.1.5 | ColumnmcmVNETChCfgInterfaceType | read-only | mandatory | NAME = ; DESC = The value of this object indicates the interface \ type of the specified voice channel. (Operational); HELP = Upon powerup, the interface type … |
| 1.3.6.1.4.1.335.1.4.21.1.2 | TablemcmVNETProfileCfgTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Profile Configuration table. \ (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1 | RowmcmVNETProfileCfgEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Profile Configuration \ table. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.1 | ColumnmcmVNETProfileCfgProfileNum | read-only | mandatory | NAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the VNET Voice \ Profile Configuration table. (Operational); HELP … |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.2 | ColumnmcmVNETProfileCfgMode | read-write | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel signal processing. (Operational); HELP = Can be used to set to either dual mode with \ bot… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.3 | ColumnmcmVNETProfileCfgDigitizingRate | read-write | mandatory | NAME = ; DESC = The value of this object selects the voice \ digitizing algorithm. (Operational); HELP = Rate at which voice is digitized in \ designated in bi… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.4 | ColumnmcmVNETProfileCfgInputLevelGain | read-write | mandatory | NAME = ; DESC = The value of this object selects the input \ signal gain in dB. (Operational); HELP = For DVM, max value is 8 dB. If more than \ 8 dB is config… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.5 | ColumnmcmVNETProfileCfgOutputLevelAttn | read-write | mandatory | NAME = ; DESC = The value of this object selects the output \ signal attenuation in dB. (Operational); HELP = For DVM, max value is 8 dB. If more than \ 8 dB i… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.6 | ColumnmcmVNETProfileCfgBusyOutMode | read-write | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel busy out control type. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.7 | ColumnmcmVNETProfileCfgBandwidth | read-write | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel link bandwidth reservation style. \ (Operational); HELP = 2 is used for forced connects or… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.8 | ColumnmcmVNETProfileCfgBackground | read-write | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel background noise generation type. \ (Operational); HELP = The ability of passing backgroun… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.9 | ColumnmcmVNETProfileCfgBRIPulseRate | read-write | obsolete | NAME = ; DESC = The value of this object selects the voice \ channel pulse rate in pulses per second. \ (Operational); HELP = NOTE: This object is used by the … |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.10 | ColumnmcmVNETProfileCfgEMSigFormat | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel E&M signaling format. (Operational); HELP = 2 and 3 are used for force connects only. \ … |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.11 | ColumnmcmVNETProfileCfgFXSSigFormat | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel FXS signaling format. (Operational); HELP = 1 is used for force connects only. \ 2 is us… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.12 | ColumnmcmVNETProfileCfgDVMSigFormat | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel DVM signaling format. (Operational); HELP = 3 and 4 are used for force connects only. \ … |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.13 | ColumnmcmVNETProfileCfgNumberOfRings | read-write | mandatory | NAME = ; DESC = The value of this object specifies when the \ voice channel (FXO or 3-port) will answer \ the call request. (Operational); HELP = ; CAPABILITIE… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.14 | ColumnmcmVNETProfileCfgEMAnalOper | read-write | mandatory | NAME = ; DESC = The value of this object specifies the E&M \ voice channel operation as either 2 or 4 wire \ operation. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.15 | ColumnmcmVNETProfileCfgRingingFreq | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel (FXS or 3-port) ringing frequency. \ (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.16 | ColumnmcmVNETProfileCfgFaxDigRate | read-write | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel Fax digitizing rate in bits per second. \ (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.17 | ColumnmcmVNETProfileCfgDiscSupervision | read-write | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel method to detect the line disconnect. \ (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.18 | ColumnmcmVNETProfileCfgLineImpedance | read-write | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel type of line impedance. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.19 | ColumnmcmVNETProfileCfgMaxOutputLevel | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel maximum output level. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.20 | ColumnmcmVNETProfileCfgRegenDelay | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel time (in seconds) to delay before dialing \ out the number (i.e., time to wait for dial … |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.21 | ColumnmcmVNETProfileCfgDialDigTimeLimit | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel inter-digit time-out time (in seconds). \ (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.22 | ColumnmcmVNETProfileCfgMaxNumForDig | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel maximum number of digits that can \ be dialed. (Operational); HELP = 0 is used for auto-… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.23 | ColumnmcmVNETProfileCfgRegenFormat | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel dial digit regeneration format. \ (Operational); HELP = NOTE: This object is not require… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.24 | ColumnmcmVNETProfileCfgCallProgTone | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel call progress tone required for different \ countries or areas. (Operational); HELP = ; … |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.25 | ColumnmcmVNETProfileCfgDTMFDetector | read-write | mandatory | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to turn on or off the DTMF \ detector. (Operational); HELP = ; CAPABILITIES =… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.26 | ColumnmcmVNETProfileCfgJitters | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel maximum jitters delay (in milliseconds). \ (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.27 | ColumnmcmVNETProfileCfgEchoCanceller | read-write | mandatory | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to turn on or off the echo \ canceller. (Operational); HELP = ; CAPABILITIES … |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.28 | ColumnmcmVNETProfileCfgAutoGainControl | read-write | mandatory | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to automatically set the input \ signal level. (Operational); HELP = ; CAPABI… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.29 | ColumnmcmVNETProfileCfgCompanderFormat | read-write | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel (DVM or BRI) compander type. \ (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.30 | ColumnmcmVNETProfileCfgPremiumVoice | read-write | mandatory | NAME = ; DESC = The value of this object specifies to the voice \ channel (DVM) whether to enable or disable the \ transparent voice (no compression) algorithm… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.31 | ColumnmcmVNETProfileCfgEndOfDialChar | read-write | mandatory | NAME = ; DESC = The value of this object specifies to the voice \ channel whether '#' is used to end a dialing input. \ (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.32 | ColumnmcmVNETProfileCfgBckGrndNoiseLevel | read-write | mandatory | NAME = ; DESC = Signal input above this level is considered\ a voiced signal, below this level, the \ Voice Activity Detector (VAD), will \ determine if it is … |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.33 | ColumnmcmVNETProfileCfgSilenceHngOvrTime | read-write | mandatory | NAME = ; DESC = Indicates the time delay to switch \ from voice to silence.\ (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.34 | ColumnmcmVNETProfileCfgIdlePattern | read-write | mandatory | NAME = ; DESC = The value of this object represents the \ Idle pattern on the line when no call is up.\ Specific to a PBX. This is a permanent DSP \ configurat… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.35 | ColumnmcmVNETProfileCfgEcanFilterLength | read-write | mandatory | NAME = ; DESC = The value of this object specifies the filter \ length for echo canceller. This is a permanent \ DSP configuration parameter.; HELP = A length … |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.36 | ColumnmcmVNETProfileCfgEcanErlImprovement | read-write | mandatory | NAME = ; DESC = The value of this object is used for echo \ canceller Er1 improvement. This is a DSP \ Dynamic configuration parameter. \ A signal will be atte… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.37 | ColumnmcmVNETProfileCfgNoiseFloorOffset | read-write | mandatory | NAME = ; DESC = The value of this object will suppress the \ impulsive backround noise in order to achieve \ silence suppression savings. HELP = ; CAPABILITIES… |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.38 | ColumnmcmVNETProfileCfgDtmfGenBurstLength | read-write | mandatory | NAME = ; DESC = DTMF burst generation in milliseconds.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.2.1.39 | ColumnmcmVNETProfileCfgDtmRegenBurstLength | read-write | mandatory | NAME = ; DESC = DTMF burst Regeneration length in milliseconds.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.3 | TablemcmVNETSwProfCfgTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Switching Profile Configuration \ table.(Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.1.3.1 | RowmcmVNETSwProfCfgEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Switching Profile \ Configuration table. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.3.1.1 | ColumnmcmVNETSwProfCfgProfileNum | read-only | mandatory | NAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the VNET Voice \ Switching Profile Configuration table. \ (Operati… |
| 1.3.6.1.4.1.335.1.4.21.1.3.1.2 | ColumnmcmVNETSwProfCfgOutCallRestrict | read-write | mandatory | NAME = ; DESC = The value of this object specifies how to \ handle outgoing calls for voice channel \ switching. (Operational); HELP = 2: include CUG ID in out… |
| 1.3.6.1.4.1.335.1.4.21.1.3.1.3 | ColumnmcmVNETSwProfCfgInCallRestrict | read-write | mandatory | NAME = ; DESC = The value of this object specifies how to \ handle incoming calls for voice channel \ switching. (Operational); HELP = 2: check CUG ID in incom… |
| 1.3.6.1.4.1.335.1.4.21.1.3.1.4 | ColumnmcmVNETSwProfCfgCUGID | read-write | mandatory | NAME = ; DESC = The value of this object assigns the Closed \ User Group ID for a voice channel. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.3.1.5 | ColumnmcmVNETSwProfCfgRestrictClassCd | read-write | mandatory | NAME = ; DESC = The value of this object assigns the Restriction \ Class Code for a voice channel. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.3.1.6 | ColumnmcmVNETSwProfCfgAutoCallEntNum | read-write | mandatory | NAME = ; DESC = The value of this object provides a voice \ channel Auto Call destination number by \ specifying an index into the ingress table. \ (Operationa… |
| 1.3.6.1.4.1.335.1.4.21.1.3.1.7 | ColumnmcmVNETSwProfCfgCallNegStrategy | read-write | mandatory | NAME = ; DESC = The value of this object specifies the preference \ for the voice algorithm when an outgoing call is \ made. (Operational); HELP = specific: wh… |
| 1.3.6.1.4.1.335.1.4.21.1.3.1.8 | ColumnmcmVNETSwProfCfgTransmitPriority | read-write | mandatory | NAME = ; DESC = The value of this object assigns the priority \ of the voice data to be transmitted. (Operational); HELP = 0: lowest priority. \ 15: highest pr… |
| 1.3.6.1.4.1.335.1.4.21.1.3.1.9 | ColumnmcmVNETSwProfCfgAutoCallType | read-write | mandatory | NAME = ; DESC = Indicates the type of auto-call \ switching to be performed by the \ voice channel.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.3.1.10 | ColumnmcmVNETSwProfCfgAddServerSelect | read-write | mandatory | NAME = ; DESC = Indicates which DNA server is used.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.3.1.11 | ColumnmcmVNETSwProfCfgOutCallMode | read-write | mandatory | NAME = ; DESC = Indicates the type of call being made.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.4 | TablemcmVNETIngressDigFilterTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Ingress Digit Filtering \ Configuration table. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.1.4.1 | RowmcmVNETIngressDigFilterEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Ingress Digit \ Filtering Configuration table. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.4.1.1 | ColumnmcmVNETIngressDigFilterIndex | read-only | mandatory | NAME = ; DESC = The value of this object indicates the index to \ the ingress table. Used as an index to the VNET \ Voice Ingress Digit Filtering Configuration… |
| 1.3.6.1.4.1.335.1.4.21.1.4.1.2 | ColumnmcmVNETIngressDigFilterIngressNum | read-write | mandatory | NAME = ; DESC = The value of this object selects the digit \ pattern to be matched. (Null terminated \ character string.) (Operational); HELP = Valid character… |
| 1.3.6.1.4.1.335.1.4.21.1.4.1.3 | ColumnmcmVNETIngressDigFilterManipString | read-write | mandatory | NAME = ; DESC = The value of this object selects commands \ to produce the ingress digits for speed dial, \ call redirect, and source ID insertion features. \ … |
| 1.3.6.1.4.1.335.1.4.21.1.5 | TablemcmVNETEgressDigManipTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Egress Digit Manipulation \ Configuration table. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.1.5.1 | RowmcmVNETEgressDigManipEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Egress Digit \ Manipulation Configuration table. (Operational); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.5.1.1 | ColumnmcmVNETEgressDigManipIndex | read-only | mandatory | NAME = ; DESC = The value of this object indicates the index to \ the egress table. Used as an index to the VNET \ Voice Egress Digit Manipulation Configuratio… |
| 1.3.6.1.4.1.335.1.4.21.1.5.1.2 | ColumnmcmVNETEgressDigManipPhoneNum | read-write | mandatory | NAME = ; DESC = The value of this object selects the phone \ number that voice channels are associated with. \ This is the number to be registered to the Addre… |
| 1.3.6.1.4.1.335.1.4.21.1.5.1.3 | ColumnmcmVNETEgressDigManipString | read-write | mandatory | NAME = ; DESC = The value of this object selects commands \ to produce the egress digits for FXO, E&M, \ or FXS 3-Port interface. The result is the \ number to… |
| 1.3.6.1.4.1.335.1.4.21.1.5.1.4 | ColumnmcmVNETEgressDigManipChIDList | read-write | mandatory | NAME = ; DESC = The value of this object selects voice channels \ associated with the phone number. The valid \ string consists of the substring 'B1'~'B6', \ '… |
| 1.3.6.1.4.1.335.1.4.21.1.6 | TablenvmVNETChCfgTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Channel Configuration table. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.1.6.1 | RownvmVNETChCfgEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Channel Configuration \ table. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.6.1.1 | ColumnnvmVNETChCfgLimID | read-only | mandatory | NAME = ; DESC = The card lim (logical interface module) number of a \ particular voice channel. Used as an index to the \ VNET Voice Channel Configuration tabl… |
| 1.3.6.1.4.1.335.1.4.21.1.6.1.2 | ColumnnvmVNETChCfgChannelID | read-only | mandatory | NAME = ; DESC = The position of the voice channel in the lim. \ Used as an index to the VNET Voice \ Channel Configuration table. (Configuration); HELP = ; CAP… |
| 1.3.6.1.4.1.335.1.4.21.1.6.1.3 | ColumnnvmVNETChCfgVoiceProfile | read-only | mandatory | NAME = ; DESC = The value of this object indicates the profile \ to be used to configure the specified voice \ channel. (Configuration); HELP = ; CAPABILITIES … |
| 1.3.6.1.4.1.335.1.4.21.1.6.1.4 | ColumnnvmVNETChCfgSwitchingProfile | read-only | mandatory | NAME = ; DESC = The value of this object indicates the profile \ to be used for a switching call. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.6.1.5 | ColumnnvmVNETChCfgInterfaceType | read-only | mandatory | NAME = ; DESC = The value of this object indicates the interface \ type of the specified voice channel. (Configuration); HELP = Upon powerup, the interface typ… |
| 1.3.6.1.4.1.335.1.4.21.1.7 | TablenvmVNETProfileCfgTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Profile Configuration table. \ (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1 | RownvmVNETProfileCfgEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Profile Configuration \ table. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.1 | ColumnnvmVNETProfileCfgProfileNum | read-only | mandatory | NAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the VNET Voice \ Profile Configuration table. (Configuration); HEL… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.2 | ColumnnvmVNETProfileCfgMode | read-only | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel signal processing. (Configuration); HELP = Can be used to set to either dual mode with \ b… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.3 | ColumnnvmVNETProfileCfgDigitizingRate | read-only | mandatory | NAME = ; DESC = The value of this object selects the voice \ digitizing algorithm. (Configuration); HELP = Rate at which voice is digitized in \ designated in … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.4 | ColumnnvmVNETProfileCfgInputLevelGain | read-only | mandatory | NAME = ; DESC = The value of this object selects the input \ signal gain in dB. (Configuration); HELP = For DVM, max value is 8 dB. If more than \ 8 dB is conf… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.5 | ColumnnvmVNETProfileCfgOutputLevelAttn | read-only | mandatory | NAME = ; DESC = The value of this object selects the output \ signal attenuation in dB. (Configuration); HELP = For DVM, max value is 8 dB. If more than \ 8 dB… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.6 | ColumnnvmVNETProfileCfgBusyOutMode | read-only | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel busy out control type. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.7 | ColumnnvmVNETProfileCfgBandwidth | read-only | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel link bandwidth reservation style. \ (Configuration); HELP = 2 is used for forced connects … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.8 | ColumnnvmVNETProfileCfgBackground | read-only | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel background noise generation type. \ (Configuration); HELP = The ability of passing backgro… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.9 | ColumnnvmVNETProfileCfgBRIPulseRate | read-only | obsolete | NAME = ; DESC = The value of this object selects the voice \ channel pulse rate in pulses per second. \ (Configuration); HELP = NOTE: This object is used by th… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.10 | ColumnnvmVNETProfileCfgEMSigFormat | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel E&M signaling format. (Configuration); HELP = 2 and 3 are used for force connects only. … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.11 | ColumnnvmVNETProfileCfgFXSSigFormat | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel FXS signaling format. (Configuration); HELP = 1 is used for force connects only. \ 2 is … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.12 | ColumnnvmVNETProfileCfgDVMSigFormat | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel DVM signaling format. (Configuration); HELP = 3 and 4 are used for force connects only. … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.13 | ColumnnvmVNETProfileCfgNumberOfRings | read-only | mandatory | NAME = ; DESC = The value of this object specifies when the \ voice channel (FXO or 3-port) will answer \ the call request. (Configuration); HELP = ; CAPABILIT… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.14 | ColumnnvmVNETProfileCfgEMAnalOper | read-only | mandatory | NAME = ; DESC = The value of this object specifies the E&M \ voice channel operation as either 2 or 4 wire \ operation. (Configuration); HELP = ; CAPABILITIES … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.15 | ColumnnvmVNETProfileCfgRingingFreq | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel (FXS or 3-port) ringing frequency. \ (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.16 | ColumnnvmVNETProfileCfgFaxDigRate | read-only | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel Fax digitizing rate in bits per second. \ (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.17 | ColumnnvmVNETProfileCfgDiscSupervision | read-only | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel method to detect the line disconnect. \ (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.18 | ColumnnvmVNETProfileCfgLineImpedance | read-only | mandatory | NAME = ; DESC = The value of this object selects the voice \ channel type of line impedance. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.19 | ColumnnvmVNETProfileCfgMaxOutputLevel | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel maximum output level. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.20 | ColumnnvmVNETProfileCfgRegenDelay | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel time (in seconds) to delay before dialing \ out the number (i.e., time to wait for dial … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.21 | ColumnnvmVNETProfileCfgDialDigTimeLimit | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel inter-digit time-out time (in seconds). \ (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.22 | ColumnnvmVNETProfileCfgMaxNumForDig | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel maximum number of digits that can \ be dialed. (Configuration); HELP = 0 is used for aut… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.23 | ColumnnvmVNETProfileCfgRegenFormat | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel dial digit regeneration format. \ (Configuration); HELP = NOTE: THIS object is not used … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.24 | ColumnnvmVNETProfileCfgCallProgTone | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel call progress tone required for different \ countries or areas. (Configuration); HELP = … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.25 | ColumnnvmVNETProfileCfgDTMFDetector | read-only | mandatory | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to turn on or off the DTMF \ detector. (Configuration); HELP = ; CAPABILITIES… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.26 | ColumnnvmVNETProfileCfgJitters | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel maximum jitters delay (in milliseconds). \ (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.27 | ColumnnvmVNETProfileCfgEchoCanceller | read-only | mandatory | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to turn on or off the echo \ canceller. (Configuration); HELP = ; CAPABILITIE… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.28 | ColumnnvmVNETProfileCfgAutoGainControl | read-only | mandatory | NAME = ; DESC = The value of this object specifies to the voice \ channel whether to automatically set the input \ signal level. (Configuration); HELP = ; CAPA… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.29 | ColumnnvmVNETProfileCfgCompanderFormat | read-only | mandatory | NAME = ; DESC = The value of this object specifies the voice \ channel (DVM or BRI) compander type. \ (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.30 | ColumnnvmVNETProfileCfgPremiumVoice | read-only | mandatory | NAME = ; DESC = The value of this object specifies to the voice \ channel (DVM) whether to enable or disable the \ transparent voice (no compression) algorithm… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.31 | ColumnnvmVNETProfileCfgEndOfDialChar | read-only | mandatory | NAME = ; DESC = The value of this object specifies to the voice \ channel whether '#' is used to end a dialing input. \ (Configuration); HELP = ; CAPABILITIES … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.32 | ColumnnvmVNETProfileCfgBckGrndNoiseLevel | read-only | mandatory | NAME = ; DESC = Signal input above this level is considered\ a voiced signal, below this level, the \ Voice Activity Detector (VAD), will \ determine if it is … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.33 | ColumnnvmVNETProfileCfgSilenceHngOvrTime | read-only | mandatory | NAME = ; DESC = Indicates the time delay to switch \ from voice to silence.\ (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.34 | ColumnnvmVNETProfileCfgIdlePattern | read-only | mandatory | NAME = ; DESC = The value of this object represents the \ Idle pattern on the line when no call is up.\ Specific to a PBX. This is a permanent DSP \ configurat… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.35 | ColumnnvmVNETProfileCfgEcanFilterLength | read-only | mandatory | NAME = ; DESC = The value of this object specifies the filter \ length for echo canceller. This is a permanent \ DSP configuration parameter.; HELP = A length … |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.36 | ColumnnvmVNETProfileCfgEcanErlImprovement | read-only | mandatory | NAME = ; DESC = The value of this object is used for echo \ canceller Er1 improvement. This is a DSP \ Dynamic configuration parameter. \ A signal will be atte… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.37 | ColumnnvmVNETProfileCfgNoiseFloorOffset | read-only | mandatory | NAME = ; DESC = The value of this object will suppress the \ impulsive backround noise in order to achieve \ silence suppression savings. HELP = ; CAPABILITIES… |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.38 | ColumnnvmVNETProfileCfgDtmfGenBurstLength | read-only | mandatory | NAME = ; DESC = DTMF burst generation in milliseconds.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.7.1.39 | ColumnnvmVNETProfileCfgDtmRegenBurstLength | read-only | mandatory | NAME = ; DESC = DTMF burst Regeneration length in milliseconds.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.8 | TablenvmVNETSwProfCfgTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Switching Profile Configuration \ table.(Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.1.8.1 | RownvmVNETSwProfCfgEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Switching Profile \ Configuration table. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.8.1.1 | ColumnnvmVNETSwProfCfgProfileNum | read-only | mandatory | NAME = ; DESC = The value of this object indicates the profile \ number. Used as an index to the VNET Voice \ Switching Profile Configuration table. \ (Configu… |
| 1.3.6.1.4.1.335.1.4.21.1.8.1.2 | ColumnnvmVNETSwProfCfgOutCallRestrict | read-only | mandatory | NAME = ; DESC = The value of this object specifies how to \ handle outgoing calls for voice channel \ switching. (Configuration); HELP = 2: include CUG ID in o… |
| 1.3.6.1.4.1.335.1.4.21.1.8.1.3 | ColumnnvmVNETSwProfCfgInCallRestrict | read-only | mandatory | NAME = ; DESC = The value of this object specifies how to \ handle incoming calls for voice channel \ switching. (Configuration); HELP = 2: check CUG ID in inc… |
| 1.3.6.1.4.1.335.1.4.21.1.8.1.4 | ColumnnvmVNETSwProfCfgCUGID | read-only | mandatory | NAME = ; DESC = The value of this object assigns the Closed \ User Group ID for a voice channel. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.8.1.5 | ColumnnvmVNETSwProfCfgRestrictClassCd | read-only | mandatory | NAME = ; DESC = The value of this object assigns the Restriction \ Class Code for a voice channel. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.8.1.6 | ColumnnvmVNETSwProfCfgAutoCallEntNum | read-only | mandatory | NAME = ; DESC = The value of this object provides a voice \ channel Auto Call destination number by \ specifying an index into the ingress table. \ (Configurat… |
| 1.3.6.1.4.1.335.1.4.21.1.8.1.7 | ColumnnvmVNETSwProfCfgCallNegStrategy | read-only | mandatory | NAME = ; DESC = The value of this object specifies the preference \ for the voice algorithm when an outgoing call is \ made. (Configuration); HELP = specific: … |
| 1.3.6.1.4.1.335.1.4.21.1.8.1.8 | ColumnnvmVNETSwProfCfgTransmitPriority | read-only | mandatory | NAME = ; DESC = The value of this object assigns the priority \ of the voice data to be transmitted. (Configuration); HELP = 0: lowest priority. \ 15: highest … |
| 1.3.6.1.4.1.335.1.4.21.1.8.1.9 | ColumnnvmVNETSwProfCfgAutoCallType | read-only | mandatory | NAME = ; DESC = Indicates the type of auto-call \ switching to be performed by the \ voice channel.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.8.1.10 | ColumnnvmVNETSwProfCfgAddServerSelect | read-only | mandatory | NAME = ; DESC = Indicates which DNA server is used.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.8.1.11 | ColumnnvmVNETSwProfCfgOutCallMode | read-only | mandatory | NAME = ; DESC = Indicates the type of call being made.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.9 | TablenvmVNETIngressDigFilterTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Ingress Digit Filtering \ Configuration table. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.1.9.1 | RownvmVNETIngressDigFilterEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Ingress Digit \ Filtering Configuration table. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.9.1.1 | ColumnnvmVNETIngressDigFilterIndex | read-only | mandatory | NAME = ; DESC = The value of this object indicates the index to \ the ingress table. Used as an index to the VNET \ Voice Ingress Digit Filtering Configuration… |
| 1.3.6.1.4.1.335.1.4.21.1.9.1.2 | ColumnnvmVNETIngressDigFilterIngressNum | read-only | mandatory | NAME = ; DESC = The value of this object selects the digit \ pattern to be matched. (Null terminated \ character string.) (Configuration); HELP = Valid charact… |
| 1.3.6.1.4.1.335.1.4.21.1.9.1.3 | ColumnnvmVNETIngressDigFilterManipString | read-only | mandatory | NAME = ; DESC = The value of this object selects commands \ to produce the ingress digits for speed dial, \ call redirect, and source ID insertion features. \ … |
| 1.3.6.1.4.1.335.1.4.21.1.10 | TablenvmVNETEgressDigManipTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Egress Digit Manipulation \ Configuration table. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.1.10.1 | RownvmVNETEgressDigManipEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Egress Digit \ Manipulation Configuration table. (Configuration); HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.1.10.1.1 | ColumnnvmVNETEgressDigManipIndex | read-only | mandatory | NAME = ; DESC = The value of this object indicates the index to \ the egress table. Used as an index to the VNET \ Voice Egress Digit Manipulation Configuratio… |
| 1.3.6.1.4.1.335.1.4.21.1.10.1.2 | ColumnnvmVNETEgressDigManipPhoneNum | read-only | mandatory | NAME = ; DESC = The value of this object selects the phone \ number that voice channels are associated with. \ This is the number to be registered to the Addre… |
| 1.3.6.1.4.1.335.1.4.21.1.10.1.3 | ColumnnvmVNETEgressDigManipString | read-only | mandatory | NAME = ; DESC = The value of this object selects commands \ to produce the egress digits for FXO, E&M, \ or FXS 3-Port interface. The result is the \ number to… |
| 1.3.6.1.4.1.335.1.4.21.1.10.1.4 | ColumnnvmVNETEgressDigManipChIDList | read-only | mandatory | NAME = ; DESC = The value of this object selects voice channels \ associated with the phone number. The valid \ string consists of the substring 'B1'~'B6', \ '… |
| 1.3.6.1.4.1.335.1.4.21.2 | NodemcmVNETOutOfOrder | NAME = ; DESC = Indicates that the DSP is not running. \ A channel reset may be required.; HELP = DSP is not running. Reset voice channel(s). If problem still … | ||
| 1.3.6.1.4.1.335.1.4.21.2 | Nodevnet-control | |||
| 1.3.6.1.4.1.335.1.4.21.2.1 | TablemcmVNETChControlTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Channel Control table. \ HELP = ; CAPABILITIES = NET_OPER, VPN_OPER ; |
| 1.3.6.1.4.1.335.1.4.21.2.1.1 | RowmcmVNETChControlEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Channel Control \ table.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.2.1.1.1 | ColumnmcmVNETChControlLimID | read-only | mandatory | NAME = ; DESC = The card lim (logical interface module) number of a \ particular voice channel. Used as an index to the \ VNET Voice Channel Control table.; HE… |
| 1.3.6.1.4.1.335.1.4.21.2.1.1.2 | ColumnmcmVNETChControlChannelID | read-only | mandatory | NAME = ; DESC = The position of the voice channel in the lim. \ Used as an index to the VNET Voice \ Channel Control table.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.2.1.1.3 | ColumnmcmVNETChControlActionCmd | write-only | mandatory | NAME = ; DESC = Setting this object will perform various \ actions on the specified voice channel. \ Note: Starting with software release 3.0, \ the enumeratio… |
| 1.3.6.1.4.1.335.1.4.21.2.2 | ScalarmcmVNETSysControlActionCmd | write-only | mandatory | NAME = ; DESC = Setting this object will perform various \ actions on the VNET voice system. \ Note: Starting with software release 3.0, \ the enumerations cle… |
| 1.3.6.1.4.1.335.1.4.21.3 | NodemcmVNETOutOfOrderRecovered | NAME = ; DESC = Indicates recovery from the out of order condition.\ Severity Level: CRITICAL.; HELP = DSP is running. Normal status indication.; | ||
| 1.3.6.1.4.1.335.1.4.21.3 | Nodevnet-status | |||
| 1.3.6.1.4.1.335.1.4.21.3.1 | TablemcmVNETChStatusTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Channel Status Display table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.3.1.1 | RowmcmVNETChStatusEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Channel Status Display \ table.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.1 | ColumnmcmVNETChStatusLimID | read-only | mandatory | NAME = ; DESC = The card lim (logical interface module) number of \ a particular voice channel. Used as an index to \ the VNET Voice Channel Status Display tab… |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.2 | ColumnmcmVNETChStatusChannelID | read-only | mandatory | NAME = ; DESC = The position of the voice channel in the lim. \ Used as an index to the VNET Voice \ Channel Status Display table.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.3 | ColumnmcmVNETChStatusInterfaceType | read-only | mandatory | NAME = ; DESC = The value of this object indicates the interface \ type of the specified voice channel.; HELP = Upon powerup, the interface type will not be \ … |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.4 | ColumnmcmVNETChStatusInterfaceSwID | read-only | mandatory | NAME = ; DESC = The value of this object indicates the command \ interface version ID (CIVID) of the specified voice \ channel. (Note: CIVID is 20 or above.); … |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.5 | ColumnmcmVNETChStatusEMType | read-only | mandatory | NAME = ; DESC = The value of this object indicates the E&M \ type of the specified voice channel.; HELP = This is for E&M interface channels only. Other \ inte… |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.6 | ColumnmcmVNETChStatusModelID | read-only | mandatory | NAME = ; DESC = The value of this object indicates the hardware \ module type for the specified DVM voice channel.; HELP = This is for DVM voice channels only.… |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.7 | ColumnmcmVNETChStatusDSPOperation | read-only | mandatory | NAME = ; DESC = The value of this object indicates the current \ DSP status of the specified voice channel.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.8 | ColumnmcmVNETChStatusNetworkConnect | read-only | mandatory | NAME = ; DESC = The value of this object indicates the current \ channel network connect status of the specified \ voice channel.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.9 | ColumnmcmVNETChStatusRemoteChHwType | read-only | mandatory | NAME = ; DESC = The value of this object indicates the remote \ voice channel hardware type (corresponding to \ the specified voice channel).; HELP = This will… |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.10 | ColumnmcmVNETChStatusRemoteChNodeName | read-only | mandatory | NAME = ; DESC = The value of this object indicates the remote \ voice channel node name (corresponding to \ the specified voice channel).; HELP = This will be … |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.11 | ColumnmcmVNETChStatusRemoteChNum | read-only | mandatory | NAME = ; DESC = The value of this object indicates the remote \ voice channel number (corresponding to \ the specified voice channel).; HELP = This will be the… |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.12 | ColumnmcmVNETChStatusRemoteChIfType | read-only | mandatory | NAME = ; DESC = The value of this object indicates the remote \ voice channel interface type (corresponding to \ the specified voice channel).; HELP = This wil… |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.13 | ColumnmcmVNETChStatusRemoteFrameIfVer | read-only | mandatory | NAME = ; DESC = The value of this object indicates the final \ negotiated software version to be run on both \ sides of a voice channel connection.; HELP = Thi… |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.14 | ColumnmcmVNETChStatusRemoteChVoiceAlg | read-only | mandatory | NAME = ; DESC = The value of this object indicates the final \ negotiated voice algorithm running on both \ sides of a voice channel connection.; HELP = This w… |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.15 | ColumnmcmVNETChStatusRemoteChFaxAlg | read-only | mandatory | NAME = ; DESC = The value of this object indicates the final \ negotiated voice fax algorithm and maximum \ speed running on both sides of a voice fax \ channe… |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.16 | ColumnmcmVNETChStatusRemoteChModemAlg | read-only | mandatory | NAME = ; DESC = The value of this object indicates the final \ negotiated voice modem algorithm and maximum \ speed running on both sides of a voice modem \ ch… |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.17 | ColumnmcmVNETChStatusSelfTestResult | read-only | mandatory | NAME = ; DESC = The value of this object indicates the results \ of a self test performed on the specified voice \ channel.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.18 | ColumnmcmVNETChStatusFlashEPROM | read-only | mandatory | NAME = ; DESC = The value of this object indicates the current \ flash EPROM status in the DSP of the specified \ voice channel.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.19 | ColumnmcmVNETChStatusEPROM | read-only | mandatory | NAME = ; DESC = The value of this object indicates the current \ EPROM status in the DSP of the specified voice \ channel.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.20 | ColumnmcmVNETChStatusDspPROMVer | read-only | mandatory | NAME = ; DESC = The value of this object indicates the DSP PROM \ version of the specified voice channel.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.21 | ColumnmcmVNETChStatusPROMID | read-only | mandatory | NAME = ; DESC = The value of this object indicates the PROM \ ID of the specified voice channel.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.3.1.1.22 | ColumnmcmVNETChStatusInputLevel | read-only | mandatory | NAME = ; DESC = The value of this object indicates the input \ level of the specified voice channel.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.3.2 | NodevoiceSysStatusGroup | |||
| 1.3.6.1.4.1.335.1.4.21.3.2.1 | ScalarvoiceSysStatusPhoneRegistrationStatus | read-only | mandatory | NAME = PhoneRegistrationStatus; DESC = Indicates current communications \ status with NAS; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.4 | NodemcmVNETFailedToSyncUp | NAME = ; DESC = Indicates that the DSP is running, \ but unable to sync up. A channel reset \ may be required.\ Severity Level: MAJOR.; HELP = Reset channel(s)… | ||
| 1.3.6.1.4.1.335.1.4.21.4 | Nodevnet-statistics | |||
| 1.3.6.1.4.1.335.1.4.21.4.1 | TablemcmVNETChStatsTable | not-accessible | mandatory | NAME = ; DESC = The VNET Voice Channel Statistics Display table. \ HELP = ; CAPABILITIES = NET_CFG, VPN_CFG; |
| 1.3.6.1.4.1.335.1.4.21.4.1.1 | RowmcmVNETChStatsEntry | not-accessible | mandatory | NAME = ; DESC = An entry in the VNET Voice Channel Statistics \ Display table.; HELP = ; CAPABILITIES = ; |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.1 | ColumnmcmVNETChStatsLimID | read-only | mandatory | NAME = ; DESC = The card lim (logical interface module) number of a \ particular voice channel. Used as an index to the \ VNET Voice Channel Statistics Display… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.2 | ColumnmcmVNETChStatsChannelID | read-only | mandatory | NAME = ; DESC = The position of the voice channel in the lim. \ Used as an index to the VNET Voice \ Channel Statistics Display table.; HELP = ; CAPABILITIES =… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.3 | ColumnmcmVNETChStatsOutCallConnTime | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ connection time (in sec) since the last statistics \ reset for the specified voice channel outgo… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.4 | ColumnmcmVNETChStatsInCallConnTime | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ connection time (in sec) since the last statistics \ reset for the specified voice channel incom… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.5 | ColumnmcmVNETChStatsOutCallsSucceded | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of positive call responses sent from the \ remote DSP since the last statistics reset \ f… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.6 | ColumnmcmVNETChStatsOutCallsFailed | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of negative call responses sent from the \ remote DSP since the last statistics reset \ f… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.7 | ColumnmcmVNETChStatsInCallsAccepted | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of positive call responses sent to the \ remote DSP since the last statistics reset \ for… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.8 | ColumnmcmVNETChStatsInCallsRejected | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of negative call responses sent to the \ remote DSP since the last statistics reset \ for… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.9 | ColumnmcmVNETChStatsNumberOfResets | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of resets sent to the DSP corresponding \ to the specified voice channel.; HELP = ; CAPAB… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.10 | ColumnmcmVNETChStatsNumberOfRetries | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of no responses sent from the DSP \ since the last DSP reset corresponding \ to the speci… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.11 | ColumnmcmVNETChStatsBBCFramesRcvd | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of frames with Bad Byte Count received \ from the DSP corresponding to the specified \ vo… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.12 | ColumnmcmVNETChStatsBEOFFramesRcvd | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of frames with Bad End Of Frame \ character received from the DSP corresponding \ to the … |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.13 | ColumnmcmVNETChStatsLostSpeechFrames | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of speech frames sent by the remote \ that were lost since power up corresponding \ to th… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.14 | ColumnmcmVNETChStatsLostControlFrames | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of control frames sent by the remote \ that were lost corresponding to the specified \ vo… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.15 | ColumnmcmVNETChStatsInvalPayloadFrRcvd | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of payload frames received from the \ remote with bad length or frame type \ correspondin… |
| 1.3.6.1.4.1.335.1.4.21.4.1.1.16 | ColumnmcmVNETChStatsInvalPUMPMsgRcvd | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of PUMP messages received from the \ remote with unknown message type, IEs, or \ invalid … |
| 1.3.6.1.4.1.335.1.4.21.4.2 | NodemcmVNETNetStatsGroup | |||
| 1.3.6.1.4.1.335.1.4.21.4.2.1 | ScalarmcmVNETNetStatsSucceedOutSVCCalls | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of successful SVC calls since the \ last network statistics reset.; HELP = ; CAPABILITIES… |
| 1.3.6.1.4.1.335.1.4.21.4.2.2 | ScalarmcmVNETNetStatsFailedOutSVCCalls | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of unsuccessful SVC calls since the \ last network statistics reset.; HELP = ; CAPABILITI… |
| 1.3.6.1.4.1.335.1.4.21.4.2.3 | ScalarmcmVNETNetStatsAcceptedInCalls | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of SVC calls accepted by this access device \ since the last network statistics reset.; H… |
| 1.3.6.1.4.1.335.1.4.21.4.2.4 | ScalarmcmVNETNetStatsRejectedInCalls | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of SVC calls rejected by this access device \ since the last network statistics reset.; H… |
| 1.3.6.1.4.1.335.1.4.21.4.2.5 | ScalarmcmVNETNetStatsSucceedDNARequests | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of successful DNA requests received \ by this access device since the last network \ stat… |
| 1.3.6.1.4.1.335.1.4.21.4.2.6 | ScalarmcmVNETNetStatsFailedDNARequests | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of unsuccessful DNA requests received \ by this access device since the last network \ st… |
| 1.3.6.1.4.1.335.1.4.21.4.2.7 | ScalarmcmVNETNetStatsFailedBuffAllocations | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of streams buffers not available \ to this access device.; HELP = ; CAPABILITIES = NET_CF… |
| 1.3.6.1.4.1.335.1.4.21.4.2.8 | ScalarmcmVNETNetStatsNumActiveCalls | read-only | mandatory | NAME = ; DESC = The value of this object indicates the total \ number of calls in progress or connected \ in this access device.; HELP = ; CAPABILITIES = NET_C… |
| 1.3.6.1.4.1.335.1.4.21.5 | NodemcmVNETFailedToSyncUpRecovered | NAME = ; DESC = Indicates recovery from the failure to \ sync up condition.\ Severity Level: INFORMATIVE. ; HELP = Synchronization is acquired. Normal Status I… | ||
| 1.3.6.1.4.1.335.1.4.21.6 | NodemcmVNETNoCVMCodeImage | NAME = ; DESC = Indicates that the built image doesn't \ contain CVM code\ Severity Level: MAJOR.; HELP = Access device code does not contain image for CVM mod… | ||
| 1.3.6.1.4.1.335.1.4.21.7 | NodemcmVNETNoTUVMCodeImage | NAME = ; DESC = Indicates that the built image doesn't \ contain TUVM code.\ Severity Level: MAJOR.; HELP = Access device code does not contain image for TUVM … | ||
| 1.3.6.1.4.1.335.1.4.21.8 | NodemcmVNETNoDVMCodeImage | NAME = ; DESC = Indicates that the built image doesn't \ contain DVM code.\ Severity Level: MAJOR.; HELP = Access device code does not contain image for DVM mo… |