Nortel-Magellan-Passport-AtmBaseMIB
261 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.19 | NodelpArc | |||
| 1.3.6.1.4.1.562.2.4.1.12.19.1 | TablelpArcRowStatusTable | not-accessible | obsolete | This entry controls the addition and deletion of lpArc components. |
| 1.3.6.1.4.1.562.2.4.1.12.19.1.1 | RowlpArcRowStatusEntry | not-accessible | obsolete | A single entry in the table represents a single lpArc component. |
| 1.3.6.1.4.1.562.2.4.1.12.19.1.1.1 | ColumnlpArcRowStatus | read-write | obsolete | This variable is used as the basis for SNMP naming of lpArc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.19.1.1.2 | ColumnlpArcComponentName | read-only | obsolete | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.19.1.1.4 | ColumnlpArcStorageType | read-only | obsolete | This variable represents the storage type value for the lpArc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.19.1.1.10 | ColumnlpArcIndex | not-accessible | obsolete | This variable represents the index for the lpArc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.19.100 | TablelpArcProvTable | not-accessible | obsolete | This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services. Note that altering any of these p… |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1 | RowlpArcProvEntry | not-accessible | obsolete | An entry in the lpArcProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.5 | ColumnlpArcTotalConnectionPoolCapacity | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Ov attribute of the same name. This attribute specifies the maximum number of connections (both VCC and VPC) tha… |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.6 | ColumnlpArcMulticastBranchesCapacity | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Ov attribute of the same name. This attribute specifies the number of multicast branches that can be enabled on … |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.10 | ColumnlpArcTxFrameMemoryAllocation | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Ov attribute txCellMemoryAllocation. It is converted from frame percentage to cell percentage by subtracting thi… |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.20 | ColumnlpArcRxFrameMemoryAllocation | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Ov attribute rxCellMemoryAllocation. It is converted from frame percentage to cell percentage by subtracting thi… |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.25 | ColumnlpArcPerVcQueueInterfaces | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name. This attribute specifies the number of independent ports or IMA components wh… |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.30 | ColumnlpArcShapingStackAllocation | read-write | obsolete | This attribute is migrated to the perVcQueueInterfaces attribute of the Lp/n Eng Arc Cqc Ov. Value ~0,~1,~2 is migrated to the value 0; value 0,~1,~2 is migrat… |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.40 | ColumnlpArcShapingScalingFactor | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name. This attribute specifies the scaling factor which is to be applied to all sha… |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.41 | ColumnlpArcCdvAttenuation | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute cdvReduction. This attribute enables the attenuation of the maximum Cell Delay Variation (CDV) … |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.42 | ColumnlpArcPortAggregation | read-write | obsolete | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute portCongestionPolicy. This attribute specifies whether port aggregation is turned on or off for… |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.43 | ColumnlpArcSubConnectionPoolCapacity | read-write | obsolete | This attribute is migrated to the Lp/n Eng Fcrc Ov attribute of the same name. This attribute specifies the maximum number of sub-connections for the LogicalPr… |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.44 | ColumnlpArcLnnConnectionPoolCapacity | read-write | obsolete | This attribute is migrated to the Lp/n Eng Fcrc Ov attribute of the same name. This attribute specifies the maximum number of resource records for the connecti… |
| 1.3.6.1.4.1.562.2.4.1.12.19.291 | TablelpArcConnCapTable | not-accessible | obsolete | This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name. This attribute is provided for backward compatibility and can only be used if… |
| 1.3.6.1.4.1.562.2.4.1.12.19.291.1 | RowlpArcConnCapEntry | not-accessible | obsolete | An entry in the lpArcConnCapTable. |
| 1.3.6.1.4.1.562.2.4.1.12.19.291.1.1 | ColumnlpArcConnCapIndex | not-accessible | obsolete | This variable represents the lpArcConnCapTable specific index for the lpArcConnCapTable. |
| 1.3.6.1.4.1.562.2.4.1.12.19.291.1.2 | ColumnlpArcConnCapValue | read-write | obsolete | This variable represents an individual value for the lpArcConnCapTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20 | NodelpAru | |||
| 1.3.6.1.4.1.562.2.4.1.12.20.1 | TablelpAruRowStatusTable | not-accessible | obsolete | This entry controls the addition and deletion of lpAru components. |
| 1.3.6.1.4.1.562.2.4.1.12.20.1.1 | RowlpAruRowStatusEntry | not-accessible | obsolete | A single entry in the table represents a single lpAru component. |
| 1.3.6.1.4.1.562.2.4.1.12.20.1.1.1 | ColumnlpAruRowStatus | read-only | obsolete | This variable is used as the basis for SNMP naming of lpAru components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.20.1.1.2 | ColumnlpAruComponentName | read-only | obsolete | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.20.1.1.4 | ColumnlpAruStorageType | read-only | obsolete | This variable represents the storage type value for the lpAru tables. |
| 1.3.6.1.4.1.562.2.4.1.12.20.1.1.10 | ColumnlpAruIndex | not-accessible | obsolete | This variable represents the index for the lpAru tables. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100 | TablelpAruOperTable | not-accessible | obsolete | This group describes the usage of ATM-specific resources on a Logical Processor running ATM services. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1 | RowlpAruOperEntry | not-accessible | obsolete | An entry in the lpAruOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.5 | ColumnlpAruTotalConnectionPoolUsage | read-only | obsolete | If the LogicalProcessor is associated with a card of a cardType other than 4pE1Aal1 or 4pDS1Aal1, this attribute indicates the total number of enabled VCCs and… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.6 | ColumnlpAruMulticastBranchesUsage | read-only | obsolete | This attribute indicates the total number of multicast branches that are active on the Logical Processor. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.10 | ColumnlpAruTxCellBlockCapacity | read-only | obsolete | This attribute indicates the amount of memory reserved for storing ATM cells to be transmitted by the Lp. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.20 | ColumnlpAruTxCellBlockUsage | read-only | obsolete | This attribute indicates the amount of memory currently being used to store ATM cells to be transmitted by the Lp. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.23 | ColumnlpAruTxCellFreeListSize | read-only | obsolete | This attribute indicates the current size of the transmit cell free list. The transmit cell free list is the memory available for storing ATM cells to be trans… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.26 | ColumnlpAruTxCellFreeListCongestionState | read-only | obsolete | This attribute indicates the congestion state of the transmit cell free list on this ATM-FP. The congestion state of a free list is indicated by a numeric valu… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.30 | ColumnlpAruTxFrameMemoryAllocation | read-only | obsolete | This attribute defines the percentage of the transmit CQM memory which is allocated to the transmit frame free list on the ATM-FP. The remaining transmit CQM m… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.40 | ColumnlpAruTxFrameBlockCapacity | read-only | obsolete | This attribute indicates the amount of memory reserved for storing frames to be transmitted by the Lp. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.50 | ColumnlpAruTxFrameBlockUsage | read-only | obsolete | This attribute indicates the amount of memory currently being used to store frames to be transmitted by the Lp. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.53 | ColumnlpAruTxFrameFreeListSize | read-only | obsolete | This attribute indicates the current size of the transmit frame free list. The transmit frame free list is the memory (in ATM cells) available for storing fram… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.56 | ColumnlpAruTxFrameFreeListCongestionState | read-only | obsolete | This attribute indicates the congestion state of the transmit frame free list on this ATM-FP. The congestion state of a free list is indicated by a numeric val… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.60 | ColumnlpAruRxCellBlockCapacity | read-only | obsolete | This attribute indicates the amount of memory reserved for storing ATM cells received by the Lp. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.70 | ColumnlpAruRxCellBlockUsage | read-only | obsolete | This attribute indicates the amount of memory currently being used to store ATM cells received by the Lp. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.73 | ColumnlpAruRxCellFreeListSize | read-only | obsolete | This attribute indicates the current size of the receive cell free list. The receive cell free list is the memory available for storing ATM cells received by t… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.76 | ColumnlpAruRxCellFreeListCongestionState | read-only | obsolete | This attribute indicates the congestion state of the receive cell free list on this ATM-FP. The congestion state of a free list is indicated by a numeric value… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.80 | ColumnlpAruRxFrameMemoryAllocation | read-only | obsolete | This attribute indicates the percentage of the receive CQM memory which is allocated to the receive frame free list on the ATM-FP. The remaining receive CQM me… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.90 | ColumnlpAruRxFrameBlockCapacity | read-only | obsolete | This attribute indicates the amount of memory reserved for storing frames received by the Lp. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.100 | ColumnlpAruRxFrameBlockUsage | read-only | obsolete | This attribute indicates the amount of memory currently being used to store frames received by the Lp. |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.103 | ColumnlpAruRxFrameFreeListSize | read-only | obsolete | This attribute indicates the current size of the receive frame free list. The receive frame free list is the memory (in ATM cells) available for storing frames… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.106 | ColumnlpAruRxFrameFreeListCongestionState | read-only | obsolete | This attribute indicates the congestion state of the receive frame free list on this ATM-FP. The congestion state of a free list is indicated by a numeric valu… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.107 | ColumnlpAruSubConnectionPoolAvailable | read-only | obsolete | This attribute indicates the number of sub-connections available for the LogicalProcessor. A sub-connection is used for interworking the ATM services with the … |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.108 | ColumnlpAruSubConnectionPoolUsage | read-only | obsolete | This attribute indicates the number of sub-connections being utilized for the LogicalProcessor. A sub-connection is used for interworking the ATM services with… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.109 | ColumnlpAruLnnConnectionPoolAvailable | read-only | obsolete | This attribute indicates the number of resource records available for the connections which utilize Logical Network Number (LNN) on the LogicalProcessor. A log… |
| 1.3.6.1.4.1.562.2.4.1.12.20.100.1.110 | ColumnlpAruLnnConnectionPoolUsage | read-only | obsolete | This attribute indicates the number of resource records being utilized for the connections which use Logical Network Number (LNN) on the LogicalProcessor. A lo… |
| 1.3.6.1.4.1.562.2.4.1.12.20.292 | TablelpAruConnUsageTable | not-accessible | obsolete | This attribute has been replaced by the set of AtmIf CA connectionPoolUsage attributes for AtmIf associated to independent links or IMA groups on this LogicalP… |
| 1.3.6.1.4.1.562.2.4.1.12.20.292.1 | RowlpAruConnUsageEntry | not-accessible | obsolete | An entry in the lpAruConnUsageTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.292.1.1 | ColumnlpAruConnUsageIndex | not-accessible | obsolete | This variable represents the lpAruConnUsageTable specific index for the lpAruConnUsageTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.292.1.2 | ColumnlpAruConnUsageValue | read-only | obsolete | This variable represents an individual value for the lpAruConnUsageTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.353 | TablelpAruTxCflThreshTable | not-accessible | obsolete | This attribute indicates the maximum value of the txCellFreeListSize and the discard thresholds of the transmit cell free list. The transmit cell free list is … |
| 1.3.6.1.4.1.562.2.4.1.12.20.353.1 | RowlpAruTxCflThreshEntry | not-accessible | obsolete | An entry in the lpAruTxCflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.353.1.1 | ColumnlpAruTxCflThreshIndex | not-accessible | obsolete | This variable represents the lpAruTxCflThreshTable specific index for the lpAruTxCflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.353.1.2 | ColumnlpAruTxCflThreshValue | read-only | obsolete | This variable represents an individual value for the lpAruTxCflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.354 | TablelpAruTxFflThreshTable | not-accessible | obsolete | This attribute indicates the maximum txFrameFreeListSize and the discard thresholds of the transmit frame free list. The transmit frame free list is the memory… |
| 1.3.6.1.4.1.562.2.4.1.12.20.354.1 | RowlpAruTxFflThreshEntry | not-accessible | obsolete | An entry in the lpAruTxFflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.354.1.1 | ColumnlpAruTxFflThreshIndex | not-accessible | obsolete | This variable represents the lpAruTxFflThreshTable specific index for the lpAruTxFflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.354.1.2 | ColumnlpAruTxFflThreshValue | read-only | obsolete | This variable represents an individual value for the lpAruTxFflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.355 | TablelpAruRxCflThreshTable | not-accessible | obsolete | This attribute indicates the maximum value of the rxCellFreeListSize and the discard thresholds of the receive cell free list. The receive cell free list is th… |
| 1.3.6.1.4.1.562.2.4.1.12.20.355.1 | RowlpAruRxCflThreshEntry | not-accessible | obsolete | An entry in the lpAruRxCflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.355.1.1 | ColumnlpAruRxCflThreshIndex | not-accessible | obsolete | This variable represents the lpAruRxCflThreshTable specific index for the lpAruRxCflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.355.1.2 | ColumnlpAruRxCflThreshValue | read-only | obsolete | This variable represents an individual value for the lpAruRxCflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.356 | TablelpAruRxFflThreshTable | not-accessible | obsolete | This attribute indicates the maximum rxFrameFreeListSize and the discard thresholds of the transmit frame free list. The receive frame free list is the memory … |
| 1.3.6.1.4.1.562.2.4.1.12.20.356.1 | RowlpAruRxFflThreshEntry | not-accessible | obsolete | An entry in the lpAruRxFflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.356.1.1 | ColumnlpAruRxFflThreshIndex | not-accessible | obsolete | This variable represents the lpAruRxFflThreshTable specific index for the lpAruRxFflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.20.356.1.2 | ColumnlpAruRxFflThreshValue | read-only | obsolete | This variable represents an individual value for the lpAruRxFflThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5 | NodelpEngArc | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.5.1 | TablelpEngArcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngArc components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.1.1 | RowlpEngArcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngArc component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.1.1.1 | ColumnlpEngArcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpEngArc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.1.1.2 | ColumnlpEngArcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.1.1.4 | ColumnlpEngArcStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngArc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.1.1.10 | ColumnlpEngArcIndex | not-accessible | mandatory | This variable represents the index for the lpEngArc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2 | NodelpEngArcOv | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.1 | TablelpEngArcOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngArcOv components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.1.1 | RowlpEngArcOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngArcOv component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.1.1.1 | ColumnlpEngArcOvRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpEngArcOv components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.1.1.2 | ColumnlpEngArcOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.1.1.4 | ColumnlpEngArcOvStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngArcOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.1.1.10 | ColumnlpEngArcOvIndex | not-accessible | mandatory | This variable represents the index for the lpEngArcOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.10 | TablelpEngArcOvProvTable | not-accessible | mandatory | This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services on ATM cards. Note that altering a… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.10.1 | RowlpEngArcOvProvEntry | not-accessible | mandatory | An entry in the lpEngArcOvProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.10.1.1 | ColumnlpEngArcOvTotalConnectionPoolCapacity | read-write | mandatory | This attribute specifies the maximum number of connections (VCC, VPC, and VPT) that can be enabled on this FP. A standard Vpt uses 3 connections and a basic Vp… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.10.1.2 | ColumnlpEngArcOvMulticastBranchesCapacity | read-write | mandatory | This attribute specifies the number of multicast branches that can be enabled on this FP. A multicast branch is used for cell replication on a VCC connection w… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.10.1.3 | ColumnlpEngArcOvTxCellMemoryAllocation | read-write | mandatory | This attribute specifies the fraction of the transmit memory which should be allocated to the transmission of cells on an FP. The remaining memory is allocated… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.2.10.1.4 | ColumnlpEngArcOvRxCellMemoryAllocation | read-write | mandatory | This attribute specifies the fraction of the receive memory which should be allocated to the reception of cells on an FP. The remaining receive memory is alloc… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3 | NodelpEngArcCqc | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.1 | TablelpEngArcCqcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngArcCqc components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.1.1 | RowlpEngArcCqcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngArcCqc component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.1.1.1 | ColumnlpEngArcCqcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpEngArcCqc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.1.1.2 | ColumnlpEngArcCqcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.1.1.4 | ColumnlpEngArcCqcStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngArcCqc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.1.1.10 | ColumnlpEngArcCqcIndex | not-accessible | mandatory | This variable represents the index for the lpEngArcCqc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2 | NodelpEngArcCqcOv | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.1 | TablelpEngArcCqcOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngArcCqcOv components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.1.1 | RowlpEngArcCqcOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngArcCqcOv component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.1.1.1 | ColumnlpEngArcCqcOvRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpEngArcCqcOv components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.1.1.2 | ColumnlpEngArcCqcOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.1.1.4 | ColumnlpEngArcCqcOvStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngArcCqcOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.1.1.10 | ColumnlpEngArcCqcOvIndex | not-accessible | mandatory | This variable represents the index for the lpEngArcCqcOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.10 | TablelpEngArcCqcOvProvTable | not-accessible | mandatory | This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services. Note that altering any of these p… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.10.1 | RowlpEngArcCqcOvProvEntry | not-accessible | mandatory | An entry in the lpEngArcCqcOvProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.10.1.1 | ColumnlpEngArcCqcOvPerVcQueueInterfaces | read-write | mandatory | This attribute specifies the number of independent ports or IMA components which support shaping and per-VC queueing on this FP. When this attribute is not zer… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.10.1.2 | ColumnlpEngArcCqcOvShapingScalingFactor | read-write | mandatory | This attribute specifies the scaling factor which is to be applied to all shaping rates for this FP. The scaling factor is an inverse factor which is applied t… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.10.1.3 | ColumnlpEngArcCqcOvCdvReduction | read-write | mandatory | This attribute specifies the reduction of the maximum Cell Delay Variation (CDV) of shaped transmit traffic. When the value of this attribute is set to disable… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.10.1.4 | ColumnlpEngArcCqcOvPortCongestionPolicy | read-write | mandatory | This attribute specifies the congestion behavior of all ports on this FP. It applies only to transmit traffic served on the common queues and does not apply to… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.450 | TablelpEngArcCqcOvConnCapTable | not-accessible | mandatory | This attribute is provided for backward compatibility and can only be used if the LogicalProcessor is associated with a card of one of the following cardType: … |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.450.1 | RowlpEngArcCqcOvConnCapEntry | not-accessible | mandatory | An entry in the lpEngArcCqcOvConnCapTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.450.1.1 | ColumnlpEngArcCqcOvConnCapIndex | not-accessible | mandatory | This variable represents the lpEngArcCqcOvConnCapTable specific index for the lpEngArcCqcOvConnCapTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.2.450.1.2 | ColumnlpEngArcCqcOvConnCapValue | read-write | mandatory | This variable represents an individual value for the lpEngArcCqcOvConnCapTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.10 | TablelpEngArcCqcOperTable | not-accessible | mandatory | This group describes the usage of ATM-specific resources on a Logical Processor running ATM services on a CQC based card. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.10.1 | RowlpEngArcCqcOperEntry | not-accessible | mandatory | An entry in the lpEngArcCqcOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.3.10.1.1 | ColumnlpEngArcCqcCdvReduction | read-only | mandatory | This attribute indicates if the reduction of the maximum Cell Delay Variation (CDV) of shaped transmit traffic is applicable. When the value of this attribute … |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4 | NodelpEngArcAqm | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.1 | TablelpEngArcAqmRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngArcAqm components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.1.1 | RowlpEngArcAqmRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngArcAqm component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.1.1.1 | ColumnlpEngArcAqmRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpEngArcAqm components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.1.1.2 | ColumnlpEngArcAqmComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.1.1.4 | ColumnlpEngArcAqmStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngArcAqm tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.1.1.10 | ColumnlpEngArcAqmIndex | not-accessible | mandatory | This variable represents the index for the lpEngArcAqm tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2 | NodelpEngArcAqmOv | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.1 | TablelpEngArcAqmOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngArcAqmOv components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.1.1 | RowlpEngArcAqmOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngArcAqmOv component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.1.1.1 | ColumnlpEngArcAqmOvRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpEngArcAqmOv components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.1.1.2 | ColumnlpEngArcAqmOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.1.1.4 | ColumnlpEngArcAqmOvStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngArcAqmOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.1.1.10 | ColumnlpEngArcAqmOvIndex | not-accessible | mandatory | This variable represents the index for the lpEngArcAqmOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10 | TablelpEngArcAqmOvProvTable | not-accessible | mandatory | This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services on CQC based cards. Note that alte… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1 | RowlpEngArcAqmOvProvEntry | not-accessible | mandatory | An entry in the lpEngArcAqmOvProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1.1 | ColumnlpEngArcAqmOvConnectionPoolCapacity | read-write | mandatory | This attribute specifies the maximum number of connections (VCC, VPC, and VPT) that can be configured on the AQM instance of the LogicalProcessor. The value of… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1.2 | ColumnlpEngArcAqmOvHighPriorityEpdOffset | read-write | mandatory | This attribute specifies the high priority Early Packet Discard (EPD) offset for connection queues. On ATM IP FPs a given connection queue is associated with o… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1.3 | ColumnlpEngArcAqmOvLowPriorityEpdOffset | read-write | mandatory | This attribute specifies the low priority Early Packet Discard (EPD) offset for connection queues. On ATM IP FPs a given connection queue is associated with on… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1.4 | ColumnlpEngArcAqmOvPortCongestionPolicy | read-write | mandatory | This attribute specifies the congestion behavior of all ports on this FP. It applies only to transmit traffic and does not apply to the CBR service category. W… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1.5 | ColumnlpEngArcAqmOvMaxVirtualLinks | read-write | mandatory | This attribute specifies the maximum number of virtual links that can use this AQM. Refer to the description of the operational attribute maxVirtualLinks under… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1.6 | ColumnlpEngArcAqmOvVirtualLinkGranularity | read-write | mandatory | This attribute specifies the granularity on which virtual link bandwidths are allocated. A value of minimum indicates the granularity is as small as possible f… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10 | TablelpEngArcAqmOperTable | not-accessible | mandatory | This group describes the usage of ATM-specific resources for a specific AQM on a Logical Processor running ATM services. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10.1 | RowlpEngArcAqmOperEntry | not-accessible | mandatory | An entry in the lpEngArcAqmOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10.1.1 | ColumnlpEngArcAqmConnectionPoolAvailable | read-only | mandatory | This attribute indicates the number of connection resources available (VCC, VPC, and VPT) that can be configured on the AQM instance of the LogicalProcessor. A… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10.1.2 | ColumnlpEngArcAqmConnectionPoolUsage | read-only | mandatory | This attribute indicates the total number of connections for configured VCCs, VPCs, and VPTs in AtmIfs associated with the AQM instance of the LogicalProcessor… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10.1.5 | ColumnlpEngArcAqmTxCellMemoryAvailable | read-only | obsolete | This attribute indicates the current availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be tra… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10.1.6 | ColumnlpEngArcAqmTxCellMemoryMinAvailable | read-only | obsolete | This attribute indicates the lowest availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be tran… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10.1.7 | ColumnlpEngArcAqmTxCellMemoryCongestionState | read-only | mandatory | This attribute indicates the congestion state of the transmit cell memory for the ATM Queue Manager (AQM) ASIC on this FP. This attribute indicates which txCel… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10.1.8 | ColumnlpEngArcAqmTxCellMemoryMaxUsage | read-only | mandatory | This attribute indicates the maximum number which has recently occurred for the txCellMemoryUsage attribute. Transmit cell memory is used for storing ATM cells… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10.1.9 | ColumnlpEngArcAqmTxCellMemoryUsage | read-only | mandatory | This attribute indicates the current number of transmit cells which are in use on this FP. Transmit cell memory is used for storing ATM cells to be transmitted… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10.1.10 | ColumnlpEngArcAqmMaxVirtualLinks | read-only | mandatory | This attribute indicates the maximum number of virtual links (VLs) that can exist on this AQM. Normally a virtual link contains all VCCs and VPCs provisioned f… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10.1.11 | ColumnlpEngArcAqmVirtualLinkUsage | read-only | mandatory | This attribute indicates the number of virtual links in use on this AQM. Its maximum value is the value of operational attribute maxVirtualLinks. Since each po… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.10.1.12 | ColumnlpEngArcAqmVirtualLinkGranularity | read-only | mandatory | This attribute indicates the granularity on which virtual link bandwidths are allocated. It is affected by the Override subcomponent's provisionable virtualLin… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.448 | TablelpEngArcAqmTxCellThreshTable | not-accessible | mandatory | This attribute is a vector which indicates the size and three discard thresholds for transmit cell memory for the ATM Queue Manager (AQM) ASIC on this FP. Tran… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.448.1 | RowlpEngArcAqmTxCellThreshEntry | not-accessible | mandatory | An entry in the lpEngArcAqmTxCellThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.448.1.1 | ColumnlpEngArcAqmTxCellThreshIndex | not-accessible | mandatory | This variable represents the lpEngArcAqmTxCellThreshTable specific index for the lpEngArcAqmTxCellThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.4.448.1.2 | ColumnlpEngArcAqmTxCellThreshValue | read-only | mandatory | This variable represents an individual value for the lpEngArcAqmTxCellThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10 | TablelpEngArcOperTable | not-accessible | mandatory | This group describes the usage of ATM-specific resources on a Logical Processor running ATM services. The attributes listed represent Queue Controller resource… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1 | RowlpEngArcOperEntry | not-accessible | mandatory | An entry in the lpEngArcOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.1 | ColumnlpEngArcTotalConnectionPoolAvailable | read-only | mandatory | This attribute indicates the number of connection resources available (VCC, VPC, and VPT) that can be used on this FP. A standard Vpt uses 3 connection resourc… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.2 | ColumnlpEngArcTotalConnectionPoolUsage | read-only | mandatory | This attribute indicates the number of connection resources (VCC, VPC, and VPT) in use on this FP. A standard Vpt uses 3 connection resources and a basic Vpt u… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.3 | ColumnlpEngArcMulticastBranchesAvailable | read-only | mandatory | This attribute indicates the total number of multicast branches that are available on this FP. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.4 | ColumnlpEngArcMulticastBranchesUsage | read-only | mandatory | This attribute indicates the total number of multicast branches that are active on this FP. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.5 | ColumnlpEngArcTxCellMemoryAllocation | read-only | mandatory | This attribute indicates the fraction of the transmit memory which is allocated for the transmission of cells on the FP. Cell memory is used for Atm Bearer Ser… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.6 | ColumnlpEngArcTxCellMemoryAvailable | read-only | obsolete | This attribute indicates the current availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be tra… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.7 | ColumnlpEngArcTxCellMemoryMinAvailable | read-only | obsolete | This attribute indicates the lowest availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be tran… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.8 | ColumnlpEngArcTxCellMemoryCongestionState | read-only | mandatory | This attribute indicates the congestion state of the transmit cell memory for this FP. This attribute indicates which txCellMemoryThresholds corresponds to the… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.9 | ColumnlpEngArcRxCellMemoryAllocation | read-only | mandatory | This attribute indicates the fraction of the receive memory which is allocated for the reception of cells on the FP. Cell memory is used for Atm Bearer Service… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.10 | ColumnlpEngArcRxCellMemoryAvailable | read-only | obsolete | This attribute indicates the current availability of the receive cell memory. The receive cell memory is the memory available for storing ATM cells to be trans… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.11 | ColumnlpEngArcRxCellMemoryMinAvailable | read-only | obsolete | This attribute indicates the lowest availability of the receive cell memory. The receive cell memory is the memory available for storing ATM cells to be transm… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.12 | ColumnlpEngArcRxCellMemoryCongestionState | read-only | mandatory | This attribute indicates the congestion state of the receive cell memory on this FP. This attribute indicates which rxCellMemoryThresholds corresponds to the c… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.13 | ColumnlpEngArcTxCellMemoryMaxUsage | read-only | mandatory | This attribute indicates the maximum number which has recently occurred for the txCellMemoryUsage attribute. On CQC-based ATM FPs, this number indicates the ma… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.14 | ColumnlpEngArcTxCellMemoryUsage | read-only | mandatory | This attribute indicates the current number of transmit cells which are in use for this FP. On CQC-based ATM FPs, this number indicates the total transmit cell… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.15 | ColumnlpEngArcRxCellMemoryMaxUsage | read-only | mandatory | This attribute indicates the maximum usage of receive cells for all ports on this FP. Receive cell memory is used for storing ATM cells received by this FP whi… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.10.1.16 | ColumnlpEngArcRxCellMemoryUsage | read-only | mandatory | This attribute indicates the current number of receive cells which are in use for all ports on this FP. Receive cell memory is used for storing ATM cells recei… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.440 | TablelpEngArcTxCellThreshTable | not-accessible | mandatory | This attribute is a vector which indicates the size and three discard thresholds for transmit cell memory for this FP. The transmit cell memory is used for sto… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.440.1 | RowlpEngArcTxCellThreshEntry | not-accessible | mandatory | An entry in the lpEngArcTxCellThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.440.1.1 | ColumnlpEngArcTxCellThreshIndex | not-accessible | mandatory | This variable represents the lpEngArcTxCellThreshTable specific index for the lpEngArcTxCellThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.440.1.2 | ColumnlpEngArcTxCellThreshValue | read-only | mandatory | This variable represents an individual value for the lpEngArcTxCellThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.444 | TablelpEngArcRxCellThreshTable | not-accessible | mandatory | This attribute is a vector which indicates the size and three discard thresholds for receive cell memory for this FP. Receive cell memory is used for storing A… |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.444.1 | RowlpEngArcRxCellThreshEntry | not-accessible | mandatory | An entry in the lpEngArcRxCellThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.444.1.1 | ColumnlpEngArcRxCellThreshIndex | not-accessible | mandatory | This variable represents the lpEngArcRxCellThreshTable specific index for the lpEngArcRxCellThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.5.444.1.2 | ColumnlpEngArcRxCellThreshValue | read-only | mandatory | This variable represents an individual value for the lpEngArcRxCellThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6 | NodelpEngFcrc | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.6.1 | TablelpEngFcrcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngFcrc components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.1.1 | RowlpEngFcrcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngFcrc component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.1.1.1 | ColumnlpEngFcrcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpEngFcrc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.1.1.2 | ColumnlpEngFcrcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.1.1.4 | ColumnlpEngFcrcStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngFcrc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.1.1.10 | ColumnlpEngFcrcIndex | not-accessible | mandatory | This variable represents the index for the lpEngFcrc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.2 | NodelpEngFcrcOv | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.6.2.1 | TablelpEngFcrcOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngFcrcOv components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.2.1.1 | RowlpEngFcrcOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngFcrcOv component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.2.1.1.1 | ColumnlpEngFcrcOvRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpEngFcrcOv components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.2.1.1.2 | ColumnlpEngFcrcOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.2.1.1.4 | ColumnlpEngFcrcOvStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngFcrcOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.2.1.1.10 | ColumnlpEngFcrcOvIndex | not-accessible | mandatory | This variable represents the index for the lpEngFcrcOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.2.10 | TablelpEngFcrcOvProvTable | not-accessible | mandatory | This group contains frame services provisionable engineering parameters for this LogicalProcessor. Note that altering any of these parameters will result in a … |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.2.10.1 | RowlpEngFcrcOvProvEntry | not-accessible | mandatory | An entry in the lpEngFcrcOvProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.2.10.1.1 | ColumnlpEngFcrcOvSubConnectionPoolCapacity | read-write | mandatory | This attribute indicates the maximum number of sub-connections for the LogicalProcessor. A sub-connection is used for interworking the ATM services with the fr… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.2.10.1.2 | ColumnlpEngFcrcOvLnnConnectionPoolCapacity | read-write | mandatory | This attribute indicates the maximum number of resource records for the connections which utilize Logical Network Number (LNN) on the LogicalProcessor. A logic… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3 | NodelpEngFcrcPqc | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.1 | TablelpEngFcrcPqcRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngFcrcPqc components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.1.1 | RowlpEngFcrcPqcRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngFcrcPqc component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.1.1.1 | ColumnlpEngFcrcPqcRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpEngFcrcPqc components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.1.1.2 | ColumnlpEngFcrcPqcComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.1.1.4 | ColumnlpEngFcrcPqcStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngFcrcPqc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.1.1.10 | ColumnlpEngFcrcPqcIndex | not-accessible | mandatory | This variable represents the index for the lpEngFcrcPqc tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2 | NodelpEngFcrcPqcOv | |||
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.1 | TablelpEngFcrcPqcOvRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpEngFcrcPqcOv components. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.1.1 | RowlpEngFcrcPqcOvRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpEngFcrcPqcOv component. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.1.1.1 | ColumnlpEngFcrcPqcOvRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpEngFcrcPqcOv components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.1.1.2 | ColumnlpEngFcrcPqcOvComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.1.1.4 | ColumnlpEngFcrcPqcOvStorageType | read-only | mandatory | This variable represents the storage type value for the lpEngFcrcPqcOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.1.1.10 | ColumnlpEngFcrcPqcOvIndex | not-accessible | mandatory | This variable represents the index for the lpEngFcrcPqcOv tables. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.10 | TablelpEngFcrcPqcOvProvTable | not-accessible | mandatory | This group is used for fine tuning resource configuration of frame services on a PQC based Logical Processor. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.10.1 | RowlpEngFcrcPqcOvProvEntry | not-accessible | mandatory | An entry in the lpEngFcrcPqcOvProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.10.1.1 | ColumnlpEngFcrcPqcOvIpRoutesPoolCapacity | read-write | mandatory | This attribute indicates the number of desired IP routing entries for the Logical Processor. It is used to determine the number of IP routing resources to be a… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.10 | TablelpEngFcrcPqcOperTable | not-accessible | mandatory | This group describes the usage of resources specific to frame services on a PQC based FP. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.10.1 | RowlpEngFcrcPqcOperEntry | not-accessible | mandatory | An entry in the lpEngFcrcPqcOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.10.1.1 | ColumnlpEngFcrcPqcIpRoutesPoolSize | read-only | mandatory | This attribute indicates the number of IP routing entries permitted on the Logical Processor. If there are enough resources on the card, this value is equal to… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.10.1.2 | ColumnlpEngFcrcPqcIpRoutesPoolUsage | read-only | mandatory | This attribute represents the current number of IP routing entries that are in use. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.10.1.3 | ColumnlpEngFcrcPqcIpRoutesPoolAvailableEst | read-only | mandatory | Each IP routing resource can hold between one and three IP routing entries. Therefore, it is not possible to know exactly how many more IP routing entries can … |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10 | TablelpEngFcrcOperTable | not-accessible | mandatory | This group indicates the configuration of processor-wide frame specific resources on a LogicalProcessor. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1 | RowlpEngFcrcOperEntry | not-accessible | mandatory | An entry in the lpEngFcrcOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.1 | ColumnlpEngFcrcSubConnectionPoolAvailable | read-only | mandatory | This attribute indicates the number of sub-connections available for the LogicalProcessor. A sub-connection is used for interworking the ATM services with the … |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.2 | ColumnlpEngFcrcSubConnectionPoolUsage | read-only | mandatory | This attribute indicates the number of sub-connections being utilized by the LogicalProcessor. A sub-connection is used for interworking the ATM services with … |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.3 | ColumnlpEngFcrcLnnConnectionPoolAvailable | read-only | mandatory | This attribute indicates the number of resource records available for the connections which utilize Logical Network Number (LNN) on the LogicalProcessor. A log… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.4 | ColumnlpEngFcrcLnnConnectionPoolUsage | read-only | mandatory | This attribute indicates the number of resource records being utilized for the connections which use Logical Network Number (LNN) on the LogicalProcessor. A lo… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.5 | ColumnlpEngFcrcTxFrameMemoryAvailable | read-only | obsolete | This attribute indicates the current availability of the transmit frame memory (in units of frames). The transmit frame memory is the memory available for stor… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.6 | ColumnlpEngFcrcTxFrameMemoryMinAvailable | read-only | obsolete | This attribute indicates the lowest availability of the transmit PQC/ CQC frame memory (in units of frames). The transmit frame memory is the memory available … |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.7 | ColumnlpEngFcrcTxFrameMemoryCongestionState | read-only | mandatory | This attribute indicates the congestion state of the transmit frame memory for this FP. This attribute indicates which txFrameMemoryThresholds corresponds to t… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.8 | ColumnlpEngFcrcRxFrameMemoryAvailable | read-only | obsolete | This attribute indicates the current availability of the receive frame memory (in units of frames). The receive frame memory is the memory available for storin… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.9 | ColumnlpEngFcrcRxFrameMemoryMinAvailable | read-only | obsolete | This attribute indicates the lowest availability of the receive frame memory (in units of frames). The receive frame memory is the memory available for storing… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.10 | ColumnlpEngFcrcRxFrameMemoryCongestionState | read-only | mandatory | This attribute indicates the congestion state of the receive frame memory for this FP. This attribute indicates which rxFrameMemoryThresholds corresponds to th… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.11 | ColumnlpEngFcrcTxFrameMemoryMaxUsage | read-only | mandatory | This attribute indicates the maximum number which has recently occurred for the txFrameMemoryUsage attribute. On CQC-based ATM FPs, this number indicates the m… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.12 | ColumnlpEngFcrcTxFrameMemoryUsage | read-only | mandatory | This attribute indicates the current number of transmit frames which are in use for this FP. On CQC-based ATM FPs, this number indicates the total transmit fra… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.13 | ColumnlpEngFcrcRxFrameMemoryMaxUsage | read-only | mandatory | This attribute indicates the maximum number which has recently occurred for the rxFrameMemorySize attribute. On CQC-based ATM FPs, this number indicates the ma… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.10.1.14 | ColumnlpEngFcrcRxFrameMemoryUsage | read-only | mandatory | This attribute indicates the current number of receive frames which are in use for this FP. On CQC-based ATM FPs, this number indicates the total receive frame… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.442 | TablelpEngFcrcTxFrThreshTable | not-accessible | mandatory | This attribute is a vector which indicates the size and three discard thresholds for transmit frame memory for this FP. The transmit frame memory is used for s… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.442.1 | RowlpEngFcrcTxFrThreshEntry | not-accessible | mandatory | An entry in the lpEngFcrcTxFrThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.442.1.1 | ColumnlpEngFcrcTxFrThreshIndex | not-accessible | mandatory | This variable represents the lpEngFcrcTxFrThreshTable specific index for the lpEngFcrcTxFrThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.442.1.2 | ColumnlpEngFcrcTxFrThreshValue | read-only | mandatory | This variable represents an individual value for the lpEngFcrcTxFrThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.446 | TablelpEngFcrcRxFrThreshTable | not-accessible | mandatory | This attribute is a vector which indicates the size and three discard thresholds for receive frame memory for this FP. The receive frame memory is used for sto… |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.446.1 | RowlpEngFcrcRxFrThreshEntry | not-accessible | mandatory | An entry in the lpEngFcrcRxFrThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.446.1.1 | ColumnlpEngFcrcRxFrThreshIndex | not-accessible | mandatory | This variable represents the lpEngFcrcRxFrThreshTable specific index for the lpEngFcrcRxFrThreshTable. |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.446.1.2 | ColumnlpEngFcrcRxFrThreshValue | read-only | mandatory | This variable represents an individual value for the lpEngFcrcRxFrThreshTable. |
| 1.3.6.1.4.1.562.2.4.2.63 | NodeatmBaseMIB | |||
| 1.3.6.1.4.1.562.2.4.2.63.1 | NodeatmBaseGroup | |||
| 1.3.6.1.4.1.562.2.4.2.63.1.5 | NodeatmBaseGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.63.1.5.1 | NodeatmBaseGroupBE00 | |||
| 1.3.6.1.4.1.562.2.4.2.63.1.5.1.2 | NodeatmBaseGroupBE00A | |||
| 1.3.6.1.4.1.562.2.4.2.63.3 | NodeatmBaseCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.63.3.5 | NodeatmBaseCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.63.3.5.1 | NodeatmBaseCapabilitiesBE00 | |||
| 1.3.6.1.4.1.562.2.4.2.63.3.5.1.2 | NodeatmBaseCapabilitiesBE00A |