Nortel-Magellan-Passport-ImaMIB
131 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.22 | NodelpIma | |||
| 1.3.6.1.4.1.562.2.4.1.12.22.1 | TablelpImaRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpIma components. |
| 1.3.6.1.4.1.562.2.4.1.12.22.1.1 | RowlpImaRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpIma component. |
| 1.3.6.1.4.1.562.2.4.1.12.22.1.1.1 | ColumnlpImaRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpIma components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.22.1.1.2 | ColumnlpImaComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.22.1.1.4 | ColumnlpImaStorageType | read-only | mandatory | This variable represents the storage type value for the lpIma tables. |
| 1.3.6.1.4.1.562.2.4.1.12.22.1.1.10 | ColumnlpImaIndex | not-accessible | mandatory | This variable represents the index for the lpIma tables. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2 | NodelpImaTest | |||
| 1.3.6.1.4.1.562.2.4.1.12.22.2.1 | TablelpImaTestRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpImaTest components. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.1.1 | RowlpImaTestRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpImaTest component. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.1.1.1 | ColumnlpImaTestRowStatus | read-only | mandatory | This variable is used as the basis for SNMP naming of lpImaTest components. These components cannot be added nor deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.1.1.2 | ColumnlpImaTestComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.1.1.4 | ColumnlpImaTestStorageType | read-only | mandatory | This variable represents the storage type value for the lpImaTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.1.1.10 | ColumnlpImaTestIndex | not-accessible | mandatory | This variable represents the index for the lpImaTest tables. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.10 | TablelpImaTestStateTable | not-accessible | mandatory | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not … |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.10.1 | RowlpImaTestStateEntry | not-accessible | mandatory | An entry in the lpImaTestStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.10.1.1 | ColumnlpImaTestAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.10.1.2 | ColumnlpImaTestOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.10.1.3 | ColumnlpImaTestUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.11 | TablelpImaTestSetupTable | not-accessible | mandatory | This group contains all of the operational data for a Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.11.1 | RowlpImaTestSetupEntry | not-accessible | mandatory | An entry in the lpImaTestSetupTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.11.1.1 | ColumnlpImaTestPurpose | read-write | mandatory | This attribute records the purpose of the test so that the test results can be associated and properly analyzed. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.11.1.2 | ColumnlpImaTestType | read-write | mandatory | This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit er… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.11.1.3 | ColumnlpImaTestFrmSize | read-write | mandatory | This attribute defines the size of the test data frames in number of bytes. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.11.1.4 | ColumnlpImaTestFrmPatternType | read-write | mandatory | This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random seque… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.11.1.5 | ColumnlpImaTestCustomizedPattern | read-write | mandatory | This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is se… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.11.1.6 | ColumnlpImaTestDataStartDelay | read-write | mandatory | This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be tr… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.11.1.7 | ColumnlpImaTestDisplayInterval | read-write | mandatory | This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.11.1.8 | ColumnlpImaTestDuration | read-write | mandatory | This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. No… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12 | TablelpImaTestResultsTable | not-accessible | mandatory | This group contains all the statistics related attributes of the Test component. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1 | RowlpImaTestResultsEntry | not-accessible | mandatory | An entry in the lpImaTestResultsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1.1 | ColumnlpImaTestElapsedTime | read-only | mandatory | This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first tr… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1.2 | ColumnlpImaTestTimeRemaining | read-only | mandatory | This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1.3 | ColumnlpImaTestCauseOfTermination | read-only | mandatory | This attribute records the reason the test is terminated. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1.4 | ColumnlpImaTestBitsTx | read-only | mandatory | This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counte… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1.5 | ColumnlpImaTestBytesTx | read-only | mandatory | This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1.6 | ColumnlpImaTestFrmTx | read-only | mandatory | This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value. |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1.7 | ColumnlpImaTestBitsRx | read-only | mandatory | This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap arou… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1.8 | ColumnlpImaTestBytesRx | read-only | mandatory | This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap aro… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1.9 | ColumnlpImaTestFrmRx | read-only | mandatory | This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap ar… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1.10 | ColumnlpImaTestErroredFrmRx | read-only | mandatory | This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it… |
| 1.3.6.1.4.1.562.2.4.1.12.22.2.12.1.11 | ColumnlpImaTestBitErrorRate | read-only | mandatory | This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3 | NodelpImaLk | |||
| 1.3.6.1.4.1.562.2.4.1.12.22.3.1 | TablelpImaLkRowStatusTable | not-accessible | mandatory | This entry controls the addition and deletion of lpImaLk components. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.1.1 | RowlpImaLkRowStatusEntry | not-accessible | mandatory | A single entry in the table represents a single lpImaLk component. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.1.1.1 | ColumnlpImaLkRowStatus | read-write | mandatory | This variable is used as the basis for SNMP naming of lpImaLk components. These components can be added and deleted. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.1.1.2 | ColumnlpImaLkComponentName | read-only | mandatory | This variable provides the component's string name for use with the ASCII Console Interface |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.1.1.4 | ColumnlpImaLkStorageType | read-only | mandatory | This variable represents the storage type value for the lpImaLk tables. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.1.1.10 | ColumnlpImaLkIndex | not-accessible | mandatory | This variable represents the index for the lpImaLk tables. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.10 | TablelpImaLkProvTable | not-accessible | mandatory | This group contains the provisionable attributes for the Link subcomponent. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.10.1 | RowlpImaLkProvEntry | not-accessible | mandatory | An entry in the lpImaLkProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.10.1.1 | ColumnlpImaLkInterfaceName | read-write | mandatory | This attribute associates the Link subcomponent with a specific interface on a function processor, for example Lp/5 E1/3 Chan/0. If IMA groups and independent … |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.11 | TablelpImaLkOperTable | not-accessible | mandatory | This group contains the operational attributes for the Link subcomponent. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.11.1 | RowlpImaLkOperEntry | not-accessible | mandatory | An entry in the lpImaLkOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.11.1.1 | ColumnlpImaLkFailureCause | read-only | mandatory | This attribute indicates the failure cause on this link. Possible values are: noFailure: there is no failure on this link. interfaceDown: the physical port use… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.11.1.2 | ColumnlpImaLkRemoteDefect | read-only | mandatory | This attribute indicates the IMA remote defect indicator (RDI) currently being received on this link. Possible values are: noDefect: no defect. physicalLayerDe… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.11.1.3 | ColumnlpImaLkRemoteLid | read-only | mandatory | This attribute indicates the link identifier (LID) used by the remote IMA group on the physical link. A value of 0 will be displayed if the link is not receivi… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.11.1.4 | ColumnlpImaLkRelativeDelay | read-only | mandatory | This attribute indicates the latest measured differential delay (rounded up in milliseconds) between this link and the link, in the same IMA group, having the … |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.11.1.5 | ColumnlpImaLkLastOifCause | read-only | mandatory | This attribute indicates the cause of the last out of IMA frame (OIF) anomaly on the link. It will always have a value of noOif if the protocol for the IMA gro… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12 | TablelpImaLkStatsTable | not-accessible | mandatory | This group contains the statistics data for the Link subcomponent. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1 | RowlpImaLkStatsEntry | not-accessible | mandatory | An entry in the lpImaLkStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.1 | ColumnlpImaLkRunningTime | read-only | mandatory | This attribute counts the length of time (in seconds) for which the Link component has been running. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.2 | ColumnlpImaLkUnavailSecs | read-only | mandatory | For an IMA group whose protocol is atmForum10, this attribute counts the number of unavailable seconds. Unavailability begins at the start of 10 contiguous sev… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.3 | ColumnlpImaLkFailures | read-only | mandatory | This attribute counts the number of failures, during link addition or normal operation, that the link has experienced. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.4 | ColumnlpImaLkUnusableSec | read-only | mandatory | This attribute counts the number of one second intervals during which the near end has been in an unusable state. This attribute will always have a value of 0 … |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.5 | ColumnlpImaLkSevErroredSec | read-only | mandatory | This attribute counts the number of one second intervals in which at least 30 percent of the IMA Control Protocol (ICP) cells were counted as ICP violations or… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.6 | ColumnlpImaLkFarEndUnusableSec | read-only | mandatory | This attribute counts the number of one second intervals during which the 'Tx/Rx Unusable' condition has been received from the far end. This attribute will al… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.7 | ColumnlpImaLkFarEndSevErroredSec | read-only | mandatory | This attribute counts the number of one second intervals containing one or more RDI defects. This attribute will not increment during FEUAS (Far-End Unavailabl… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.8 | ColumnlpImaLkFarEndUnavailSec | read-only | mandatory | This attribute counts the number of unavailable seconds at the far end. Unavailability begins at the start of 10 contiguous severely errored seconds (SES) at t… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.9 | ColumnlpImaLkIcpViolations | read-only | mandatory | This attribute counts the number of errored, invalid or missing IMA Control Protocol (ICP) cells during non-SES (Severely Errored Second) and non-UAS (Unavaila… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.10 | ColumnlpImaLkTxStuffEvents | read-only | mandatory | This attribute counts the number of Stuff events transmitted during non-SES (Severely Errored Second) and non-UAS (Unavailable Seconds) conditions. This attrib… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.11 | ColumnlpImaLkRxStuffEvents | read-only | mandatory | This attribute counts the number of Stuff events received during non-SES (Severely Errored Second) and non-UAS (Unavailable Seconds) conditions. This attribute… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.12.1.12 | ColumnlpImaLkIdleCellSec | read-only | mandatory | This attributes counts the number of one second intervals during which one or more idle cells was received. The reception of idle cells is an abnormal conditio… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.13 | TablelpImaLkStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.13.1 | RowlpImaLkStateEntry | not-accessible | mandatory | An entry in the lpImaLkStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.13.1.1 | ColumnlpImaLkAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.13.1.2 | ColumnlpImaLkOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.13.1.3 | ColumnlpImaLkUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.13.1.4 | ColumnlpImaLkAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.13.1.5 | ColumnlpImaLkProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.13.1.6 | ColumnlpImaLkControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.13.1.7 | ColumnlpImaLkAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.13.1.8 | ColumnlpImaLkStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.22.3.13.1.9 | ColumnlpImaLkUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.1.12.22.10 | TablelpImaProvTable | not-accessible | mandatory | This group contains the provisionable attributes for the Ima component. |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1 | RowlpImaProvEntry | not-accessible | mandatory | An entry in the lpImaProvTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.1 | ColumnlpImaLinkSelectionCriterion | read-write | mandatory | This attribute specifies the method to be used by the IMA group when selecting links to be activated. This comes into effect only when the configured links do … |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.2 | ColumnlpImaMaxDiffDelay | read-write | mandatory | This attribute specifies the maximum differential delay (in milliseconds) between links acceptable in the IMA group. If a link violates that maximum differenti… |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.3 | ColumnlpImaLinkRetryTimeout | read-write | mandatory | This attribute specifies the amount of time (in seconds) before reactivation of a link is attempted after it recovers from a failure condition. |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.4 | ColumnlpImaApplicationFramerName | read-write | mandatory | This attribute defines the link to the AtmIf component using the Ima. An example is AtmIf/31. |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.5 | ColumnlpImaTransmitClockMode | read-write | mandatory | This attribute specifies the transmit clocking mode. If itc (Independent Transmit Clock) is chosen, the physical ports used by the IMA group may have different… |
| 1.3.6.1.4.1.562.2.4.1.12.22.10.1.6 | ColumnlpImaProtocol | read-write | mandatory | This attribute specifies what protocol the component should run. If atmForum10 is chosen, the ATM Forum's IMA protocol (version 1.0) will be used and signalled… |
| 1.3.6.1.4.1.562.2.4.1.12.22.11 | TablelpImaOperTable | not-accessible | mandatory | This group contains the operational attributes for the Ima component. |
| 1.3.6.1.4.1.562.2.4.1.12.22.11.1 | RowlpImaOperEntry | not-accessible | mandatory | An entry in the lpImaOperTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.11.1.1 | ColumnlpImaFailureCause | read-only | mandatory | This attribute indicates the cause of the current local end failure experienced by the IMA group. The failure may have occurred during a start-up procedure or … |
| 1.3.6.1.4.1.562.2.4.1.12.22.11.1.2 | ColumnlpImaRemoteDefect | read-only | mandatory | This attribute indicates the cause of the current far end defect experienced by the IMA group. For the ATM Forum IMA protocol, possible values are: noDefect: n… |
| 1.3.6.1.4.1.562.2.4.1.12.22.11.1.3 | ColumnlpImaRemoteLidsConfig | read-only | mandatory | This attribute indicates all the links which have been configured in the remote IMA group. For example, if links 1, 3 and 5 have been configured in the remote … |
| 1.3.6.1.4.1.562.2.4.1.12.22.11.1.4 | ColumnlpImaRemoteLidsActive | read-only | mandatory | This attribute indicates all the links which are active in the remote IMA group. For example, if links 1 and 5 are active in the remote IMA, this attribute wou… |
| 1.3.6.1.4.1.562.2.4.1.12.22.11.1.5 | ColumnlpImaCellCapacity | read-only | mandatory | This attribute indicates the total cell capacity (in cells per second) which is provided to the ATM layer. This cell capacity takes into account the physical a… |
| 1.3.6.1.4.1.562.2.4.1.12.22.11.1.6 | ColumnlpImaRemoteGid | read-only | mandatory | This attribute indicates the IMA group identifier (GID) used by the remote IMA. A value of 0 will be displayed if the group is not receiving IMA Control Protoc… |
| 1.3.6.1.4.1.562.2.4.1.12.22.11.1.7 | ColumnlpImaClockingModeMismatch | read-only | mandatory | This attribute indicates whether or not both ends of the IMA group are using the same transmit clocking mode (itc/ctc). Its value will be yes if both ends are … |
| 1.3.6.1.4.1.562.2.4.1.12.22.12 | TablelpImaStatsTable | not-accessible | mandatory | This group contains the statistics data for the Ima component. |
| 1.3.6.1.4.1.562.2.4.1.12.22.12.1 | RowlpImaStatsEntry | not-accessible | mandatory | An entry in the lpImaStatsTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.12.1.1 | ColumnlpImaRunningTime | read-only | mandatory | This attribute indicates the length of time (in seconds) for which the Ima component has been in the unlocked state or has been used for operational testing. |
| 1.3.6.1.4.1.562.2.4.1.12.22.12.1.2 | ColumnlpImaUnavailSecs | read-only | mandatory | This attribute indicates the number of one second intervals during which the Ima component has been unlocked and out of service. |
| 1.3.6.1.4.1.562.2.4.1.12.22.12.1.3 | ColumnlpImaFailures | read-only | mandatory | This attribute indicates the number of complete failures, during start-up or normal operation, that the Ima component has experienced since being added. It mus… |
| 1.3.6.1.4.1.562.2.4.1.12.22.12.1.4 | ColumnlpImaReceiveCellUtilization | read-only | mandatory | This attribute indicates the ratio of the number of valid, assigned user cells received on the IMA group to the IMA cell capacity (based on the number of activ… |
| 1.3.6.1.4.1.562.2.4.1.12.22.12.1.5 | ColumnlpImaTransmitCellUtilization | read-only | mandatory | This attribute indicates the ratio of the number of user cells transmitted on the IMA group to the IMA cell capacity (based on the number of active links). The… |
| 1.3.6.1.4.1.562.2.4.1.12.22.13 | TablelpImaCidDataTable | not-accessible | mandatory | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. |
| 1.3.6.1.4.1.562.2.4.1.12.22.13.1 | RowlpImaCidDataEntry | not-accessible | mandatory | An entry in the lpImaCidDataTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.13.1.1 | ColumnlpImaCustomerIdentifier | read-write | mandatory | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value… |
| 1.3.6.1.4.1.562.2.4.1.12.22.14 | TablelpImaStateTable | not-accessible | mandatory | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about t… |
| 1.3.6.1.4.1.562.2.4.1.12.22.14.1 | RowlpImaStateEntry | not-accessible | mandatory | An entry in the lpImaStateTable. |
| 1.3.6.1.4.1.562.2.4.1.12.22.14.1.1 | ColumnlpImaAdminState | read-only | mandatory | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from provi… |
| 1.3.6.1.4.1.562.2.4.1.12.22.14.1.2 | ColumnlpImaOperationalState | read-only | mandatory | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if ad… |
| 1.3.6.1.4.1.562.2.4.1.12.22.14.1.3 | ColumnlpImaUsageState | read-only | mandatory | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates … |
| 1.3.6.1.4.1.562.2.4.1.12.22.14.1.4 | ColumnlpImaAvailabilityStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued se… |
| 1.3.6.1.4.1.562.2.4.1.12.22.14.1.5 | ColumnlpImaProceduralStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set,… |
| 1.3.6.1.4.1.562.2.4.1.12.22.14.1.6 | ColumnlpImaControlStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at… |
| 1.3.6.1.4.1.562.2.4.1.12.22.14.1.7 | ColumnlpImaAlarmStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at m… |
| 1.3.6.1.4.1.562.2.4.1.12.22.14.1.8 | ColumnlpImaStandbyStatus | read-only | mandatory | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not su… |
| 1.3.6.1.4.1.562.2.4.1.12.22.14.1.9 | ColumnlpImaUnknownStatus | read-only | mandatory | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be … |
| 1.3.6.1.4.1.562.2.4.2.115 | NodeimaMIB | |||
| 1.3.6.1.4.1.562.2.4.2.115.1 | NodeimaGroup | |||
| 1.3.6.1.4.1.562.2.4.2.115.1.5 | NodeimaGroupBE | |||
| 1.3.6.1.4.1.562.2.4.2.115.1.5.1 | NodeimaGroupBE00 | |||
| 1.3.6.1.4.1.562.2.4.2.115.1.5.1.2 | NodeimaGroupBE00A | |||
| 1.3.6.1.4.1.562.2.4.2.115.3 | NodeimaCapabilities | |||
| 1.3.6.1.4.1.562.2.4.2.115.3.5 | NodeimaCapabilitiesBE | |||
| 1.3.6.1.4.1.562.2.4.2.115.3.5.1 | NodeimaCapabilitiesBE00 | |||
| 1.3.6.1.4.1.562.2.4.2.115.3.5.1.2 | NodeimaCapabilitiesBE00A |