OMNI-gx2Dm1000-MIB
182 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.28.1 | Nodegx2Dm1000Descriptor | |||
| 1.3.6.1.4.1.1166.6.1.2.28.1 | NodetrapDM1000ConfigChangeInteger | This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain curre… | ||
| 1.3.6.1.4.1.1166.6.1.2.28.2 | Tablegx2Dm1000AnalogTable | not-accessible | mandatory | This table contains gx2Dm1000 specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.28.2 | NodetrapDM1000ConfigChangeDisplayString | This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may … | ||
| 1.3.6.1.4.1.1166.6.1.2.28.2.1 | Rowgx2Dm1000AnalogEntry | not-accessible | mandatory | This list contains the analog parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.1 | Columngx2Dm1000AnalogTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.2 | Columndm1000labelOffsetNomMonitor | read-only | optional | The value of this object provides the label of the Offset Monitor Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.3 | Columndm1000uomOffsetNomMonitor | read-only | optional | The value of this object provides the Unit of Measure of the Offset Monitor Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.4 | Columndm1000majorHighOffsetNomMonitor | read-only | mandatory | The value of this object provides the Major High alarm value of the Offset Monitor Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.5 | Columndm1000majorLowOffsetNomMonitor | read-only | mandatory | The value of this object provides the Major Low alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.6 | Columndm1000minorHighOffsetNomMonitor | read-only | mandatory | The value of this object provides the Minor High alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is repres… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.7 | Columndm1000minorLowOffsetNomMonitor | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.8 | Columndm1000currentValueOffsetNomMonitor | read-only | mandatory | The value of this object provides the Current value of the Offset Monitor Power Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.9 | Columndm1000stateFlagOffsetNomMonitor | read-only | mandatory | The value of this object provides the state of the Offset Monitor Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.10 | Columndm1000minValueOffsetNomMonitor | read-only | mandatory | The value of this object provides the minimum value the Offset Monitor Power Analog parameter can achive. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.11 | Columndm1000maxValueOffsetNomMonitor | read-only | mandatory | The value of this object provides the maximum value the Offset Monitor Power Analog parameter can achive. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.12 | Columndm1000alarmStateOffsetNomMonitor | read-only | mandatory | The value of this object provides the curent alarm state of the Offset Monitor Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.13 | Columndm1000labelOffsetNomCnt | read-only | optional | The value of this object provides the label of the Offset Control Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.14 | Columndm1000uomOffsetNomCnt | read-only | optional | The value of this object provides the Unit of Measure of the Offset Control Analog parameter.. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.15 | Columndm1000majorHighOffsetNomCnt | read-only | obsolete | The value of this object provides the Major High alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.16 | Columndm1000majorLowOffsetNomCnt | read-only | obsolete | The value of this object provides the Major Low alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.17 | Columndm1000minorHighOffsetNomCnt | read-only | obsolete | The value of this object provides the Minor High alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.18 | Columndm1000minorLowOffsetNomCnt | read-only | obsolete | The value of this object provides the Minor Low alarm value of the Offset Control Analog parameter. This value is a floating point number that is represented a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.19 | Columndm1000currentValueOffsetNomCnt | read-write | mandatory | The value of this object provides the Current value of the Offset Control Analog parameter. This value is a floating point number that is represented as an IEE… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.20 | Columndm1000stateFlagOffsetNomCnt | read-only | mandatory | The value of this object provides the state of the Offset Control Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.21 | Columndm1000minValueOffsetNomCnt | read-only | mandatory | The value of this object provides the minimum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.22 | Columndm1000maxValueOffsetNomCnt | read-only | mandatory | The value of this object provides the maximum value the Offset Control Analog parameter can achive. This value is a floating point number that is represented a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.23 | Columndm1000alarmStateOffsetNomCnt | read-only | obsolete | The value of this object provides the curent alarm state of the Offset Control Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.24 | Columndm1000labelAttenSetting | read-only | optional | The value of this object provides the label of the Attenuator Setting Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.25 | Columndm1000uomAttenSetting | read-only | optional | The value of this object provides the Unit of Measure of the Attenuator Setting Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.26 | Columndm1000majorHighAttenSetting | read-only | obsolete | The value of this object provides the Major High alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.27 | Columndm1000majorLowAttenSetting | read-only | obsolete | The value of this object provides the Major Low alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.28 | Columndm1000minorHighAttenSetting | read-only | obsolete | The value of this object provides the Minor High alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.29 | Columndm1000minorLowAttenSetting | read-only | obsolete | The value of this object provides the Minor Low alarm value of the Attenuator Setting Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.30 | Columndm1000currentValueAttenSetting | read-write | mandatory | The value of this object provides the Current value of the Attenuator Setting Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.31 | Columndm1000stateFlagAttenSetting | read-only | mandatory | The value of this object provides the state of the Attenuator Setting Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.32 | Columndm1000minValueAttenSetting | read-only | mandatory | The value of this object provides the minimum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.33 | Columndm1000maxValueAttenSetting | read-only | mandatory | The value of this object provides the maximum value the Attenuator Setting Analog parameter can achive. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.34 | Columndm1000alarmStateAttenSetting | read-only | mandatory | The value of this object provides the curent alarm state of the Attenuator Setting Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.35 | Columndm1000labelLaserPower | read-only | optional | The value of this object provides the label of the Laser Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.36 | Columndm1000uomLaserPower | read-only | optional | The value of this object provides the Unit of Measure of the Laser Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.37 | Columndm1000majorHighLaserPower | read-only | mandatory | The value of this object provides the Major High alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.38 | Columndm1000majorLowLaserPower | read-only | mandatory | The value of this object provides the Major Low alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.39 | Columndm1000minorHighLaserPower | read-only | obsolete | The value of this object provides the Minor High alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.40 | Columndm1000minorLowLaserPower | read-only | obsolete | The value of this object provides the Minor Low alarm value of the Laser Optical Power Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.41 | Columndm1000currentValueLaserPower | read-only | mandatory | The value of this object provides the Current value of the Laser Optical Power Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.42 | Columndm1000stateFlagLaserPower | read-only | mandatory | The value of this object provides the state of the Laser Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.43 | Columndm1000minValueLaserPower | read-only | mandatory | The value of this object provides the minimum value the Laser Optical Power Analog parameter can achive. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.44 | Columndm1000maxValueLaserPower | read-only | mandatory | The value of this object provides the maximum value the Laser Optical Power Analog parameter can achive. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.45 | Columndm1000alarmStateLaserPower | read-only | mandatory | The value of this object provides the curent alarm state of the Laser Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.46 | Columndm1000labelLaserTemp | read-only | optional | The value of this object provides the label of the Laser Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.47 | Columndm1000uomLaserTemp | read-only | optional | The value of this object provides the Unit of Measure of the Laser Temperature Analog parameter.. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.48 | Columndm1000majorHighLaserTemp | read-only | mandatory | The value of this object provides the Major High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.49 | Columndm1000majorLowLaserTemp | read-only | mandatory | The value of this object provides the Major Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represente… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.50 | Columndm1000minorHighLaserTemp | read-only | obsolete | The value of this object provides the Minor High alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.51 | Columndm1000minorLowLaserTemp | read-only | obsolete | The value of this object provides the Minor Low alarm value of the Laser Temperature Analog parameter. This value is a floating point number that is represente… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.52 | Columndm1000currentValueLaserTemp | read-only | mandatory | The value of this object provides the Current value of the Laser Temperature Analog parameter. This value is a floating point number that is represented as an … |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.53 | Columndm1000stateFlagLaserTemp | read-only | mandatory | The value of this object provides the state of the Laser Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.54 | Columndm1000minValueLaserTemp | read-only | mandatory | The value of this object provides the minimum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represente… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.55 | Columndm1000maxValueLaserTemp | read-only | mandatory | The value of this object provides the maximum value the Laser Temperature Analog parameter can achive. This value is a floating point number that is represente… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.56 | Columndm1000alarmStateLaserTemp | read-only | mandatory | The value of this object provides the curent alarm state of the Laser Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.57 | Columndm1000labelLaserCurrent | read-only | optional | The value of this object provides the label of the Laser Bias Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.58 | Columndm1000uomLaserCurrent | read-only | optional | The value of this object provides the Unit of Measure of the Laser Bias Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.59 | Columndm1000majorHighLaserCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.60 | Columndm1000majorLowLaserCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.61 | Columndm1000minorHighLaserCurrent | read-only | obsolete | The value of this object provides the Minor High alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.62 | Columndm1000minorLowLaserCurrent | read-only | obsolete | The value of this object provides the Minor Low alarm value of the Laser Bias Current Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.63 | Columndm1000currentValueLaserCurrent | read-only | mandatory | The value of this object provides the Current value of the Laser Bias Current Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.64 | Columndm1000stateFlagLaserCurrent | read-only | mandatory | The value of this object provides the state of the Laser Bias Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.65 | Columndm1000minValueLaserCurrent | read-only | mandatory | The value of this object provides the minimum value the Laser Bias Current Analog parameter can achive. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.66 | Columndm1000maxValueLaserCurrent | read-only | mandatory | The value of this object provides the maximum value the Laser Bias Current Analog parameter can achive. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.67 | Columndm1000alarmStateLaserCurrent | read-only | mandatory | The value of this object provides the curent alarm state of the Laser Bias Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.68 | Columndm1000labelTecCurrent | read-only | optional | The value of this object provides the label of the TEC Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.69 | Columndm1000uomTecCurrent | read-only | optional | The value of this object provides the Unit of Measure of the TEC Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.70 | Columndm1000majorHighTecCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.71 | Columndm1000majorLowTecCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.72 | Columndm1000minorHighTecCurrent | read-only | obsolete | The value of this object provides the Minor High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.73 | Columndm1000minorLowTecCurrent | read-only | obsolete | The value of this object provides the Minor Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.74 | Columndm1000currentValueTecCurrent | read-only | mandatory | The value of this object provides the Current value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.75 | Columndm1000stateFlagTecCurrent | read-only | mandatory | The value of this object provides the state of the TEC Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.76 | Columndm1000minValueTecCurrent | read-only | mandatory | The value of this object provides the minimum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.77 | Columndm1000maxValueTecCurrent | read-only | mandatory | The value of this object provides the maximum value the TEC Current Analog parameter can achive. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.78 | Columndm1000alarmStateTecCurrent | read-only | mandatory | The value of this object provides the curent alarm state of the TEC Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.79 | Columndm1000labelModTemp | read-only | optional | The value of this object provides the label of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.80 | Columndm1000uomModTemp | read-only | optional | The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.81 | Columndm1000majorHighModTemp | read-only | mandatory | The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.82 | Columndm1000majorLowModTemp | read-only | mandatory | The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.83 | Columndm1000minorHighModTemp | read-only | mandatory | The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.84 | Columndm1000minorLowModTemp | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.85 | Columndm1000currentValueModTemp | read-only | mandatory | The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.86 | Columndm1000stateFlagModTemp | read-only | mandatory | The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.87 | Columndm1000minValueModTemp | read-only | mandatory | The value of this object provides the minimum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.88 | Columndm1000maxValueModTemp | read-only | mandatory | The value of this object provides the maximum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.89 | Columndm1000alarmStateModTemp | read-only | mandatory | The value of this object provides the curent alarm state of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.90 | Columndm1000labelFanCurrent | read-only | optional | The value of this object provides the label of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.91 | Columndm1000uomFanCurrent | read-only | optional | The value of this object provides the Unit of Measure of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.92 | Columndm1000majorHighFanCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.93 | Columndm1000majorLowFanCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.94 | Columndm1000minorHighFanCurrent | read-only | obsolete | The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.95 | Columndm1000minorLowFanCurrent | read-only | obsolete | The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.96 | Columndm1000currentValueFanCurrent | read-only | mandatory | The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.97 | Columndm1000stateFlagFanCurrent | read-only | mandatory | The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.98 | Columndm1000minValueFanCurrent | read-only | mandatory | The value of this object provides the minimum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.99 | Columndm1000maxValueFanCurrent | read-only | mandatory | The value of this object provides the maximum value the Fan Current Analog parameter can achive. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.28.2.1.100 | Columndm1000alarmStateFanCurrent | read-only | mandatory | The value of this object provides the curent alarm state of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.3 | Tablegx2Dm1000DigitalTable | not-accessible | mandatory | This table contains gx2Dm1000m specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.28.3 | NodetrapDM1000fanCurrentAlarm | This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.3.2 | Rowgx2Dm1000DigitalEntry | not-accessible | mandatory | This list contains digital parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.1 | Columngx2Dm1000DigitalTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.2 | Columndm1000labelRfInput | read-only | optional | The value of this object provides the label of the RF Input Control Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.3 | Columndm1000enumRfInput | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.4 | Columndm1000valueRfInput | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.5 | Columndm1000stateflagRfInput | read-only | mandatory | The value of this object provides the state of the RF Input Control Digital parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.6 | Columndm1000labelOptOutput | read-only | optional | The value of this object provides the label of the Optical Output Control Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.7 | Columndm1000enumOptOutput | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.8 | Columndm1000valueOptOutput | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.9 | Columndm1000stateflagOptOutput | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.10 | Columndm1000labelSbsControl | read-only | optional | The value of this object provides the label of the SBS Control Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.11 | Columndm1000enumSbsControl | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.12 | Columndm1000valueSbsControl | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.13 | Columndm1000stateflagSbsControl | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.14 | Columndm1000labelLaserMode | read-only | optional | The value of this object provides the label of the Laser Mode Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.15 | Columndm1000enumLaserMode | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.16 | Columndm1000valueLaserMode | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.17 | Columndm1000stateflagLaserMode | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.18 | Columndm1000labelFactoryDefault | read-only | optional | The value of this object provides the label of the Factory Default Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.19 | Columndm1000enumFactoryDefault | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.20 | Columndm1000valueFactoryDefault | read-write | mandatory | The value of this object is the current value of the parameter. Return value is meaningless |
| 1.3.6.1.4.1.1166.6.1.2.28.3.2.21 | Columndm1000stateflagFactoryDefault | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.4 | Tablegx2Dm1000StatusTable | not-accessible | mandatory | This table contains gx2Dm1000 specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.28.4 | NodetrapDM1000ModuleTempAlarm | This trap is issued when the Module Temperature parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.4.3 | Rowgx2Dm1000StatusEntry | not-accessible | mandatory | This list contains Status parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.1 | Columngx2Dm1000StatusTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.2 | Columndm1000labelBoot | read-only | optional | The value of this object provides the label of the Boot Status Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.3 | Columndm1000valueBoot | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.4 | Columndm1000stateflagBoot | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.5 | Columndm1000labelFlash | read-only | optional | The value of this object provides the label of the Flash Status Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.6 | Columndm1000valueFlash | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.7 | Columndm1000stateflagFlash | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.8 | Columndm1000labelFactoryDataCRC | read-only | optional | The value of this object provides the label of the Factory Data CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.9 | Columndm1000valueFactoryDataCRC | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.10 | Columndm1000stateflagFactoryDataCRC | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.11 | Columndm1000labelLaserDataCRC | read-only | optional | The value of this object provides the label of the Laser Data CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.12 | Columndm1000valueLaserDataCRC | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.13 | Columndm1000stateflagLaserDataCRC | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.14 | Columndm1000labelAlarmDataCrc | read-only | optional | The value of this object provides the label of the Alarm Data Crc parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.15 | Columndm1000valueAlarmDataCrc | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.16 | Columndm1000stateflagAlarmDataCrc | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.17 | Columndm1000labelRFInputStatus | read-only | optional | The value of this object provides the label of the Alarm Data Crc parameter. |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.18 | Columndm1000valueRFInputStatus | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.28.4.3.19 | Columndm1000stateflagRFInputStatus | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.28.5 | Tablegx2Dm1000FactoryTable | not-accessible | mandatory | This table contains gx2Dm1000 specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.28.5 | NodetrapDM1000omiOffsetAlarm | This trap is issued when the OMI Offset goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.5.4 | Rowgx2Dm1000FactoryEntry | not-accessible | mandatory | This list contains Factory parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.1 | Columngx2Dm1000FactoryTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.2 | Columndm1000bootControlByte | read-only | mandatory | The value of this object indicates which bank the firmware is currently being boot from. |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.3 | Columndm1000bootStatusByte | read-only | mandatory | This object indicates the status of the last boot. Bit 2 = Bank 0/1 Active (0 = Bank 0, 1 = Bank 1), Bit 1 = Bank 1 Fail and Bit 0 = Bank 0 Fail (0 = Pass, 1 =… |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.4 | Columndm1000bank1CRC | read-only | mandatory | This object provides the CRC code of bank 0. The display formate for the data is Hex. |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.5 | Columndm1000bank2CRC | read-only | mandatory | This object provides the CRC code of bank 1.The display formate for the data is Hex. |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.6 | Columndm1000prgEEPROMByte | read-only | mandatory | This object indicates if the EEPROM has been programmed |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.7 | Columndm1000factoryCRC | read-only | mandatory | This object provides the CRC code for the Factory data. |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.8 | Columndm1000calculateCRC | read-only | obsolete | This object indicates which of the Enums will have the CRC calculated. |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.9 | Columndm1000hourMeter | read-only | mandatory | This object provides the hour meter reading of the module. |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.10 | Columndm1000flashPrgCntA | read-only | mandatory | This object provides the number of times Bank 1 flash has been programmed. |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.11 | Columndm1000flashPrgCntB | read-only | mandatory | This object provides the number of times Bank 1 flash has been programmed. |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.12 | Columndm1000flashBankARev | read-only | mandatory | This object provides the revision of flash bank 0. The rev is 2 characters. |
| 1.3.6.1.4.1.1166.6.1.2.28.5.4.13 | Columndm1000flashBankBRev | read-only | mandatory | This object provides the revision of flash bank 1. The rev is 2 characters. |
| 1.3.6.1.4.1.1166.6.1.2.28.6 | NodetrapDM1000tecCurrentAlarm | This trap is issued when the TEC Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.7 | NodetrapDM1000LaserCurrentAlarm | This trap is issued when the Laser Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.8 | NodetrapDM1000LaserTempAlarm | This trap is issued when the Laser Temp parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.9 | NodetrapDM1000LaserPowerAlarm | This trap is issued when the Laser Power parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.10 | NodetrapDM1000FlashAlarm | This trap is issued when the Laser Modules detects an error during Flash memory operations. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.11 | NodetrapDM1000BankBootAlarm | This trap is issued when the Laser Modules detects an error while booting from bank 0 or bank 1. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.12 | NodetrapDM1000AlarmDataCRCAlarm | This trap is issued when the Alarm Data CRC is incorrect. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.13 | NodetrapDM1000FactoryDataCRCAlarm | This trap is issued when the Factory Data CRC is incorrect. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.14 | NodetrapDM1000CalDataCRCAlarm | This trap is issued when the Cal Data CRC is incorrect. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.15 | NodetrapDM1000ResetFacDefault | This trap is issued when the DM1000 resets to factory defaults | ||
| 1.3.6.1.4.1.1166.6.1.2.28.16 | NodetrapDM1000UserRFOffAlarm | This trap is issued when the the User RF is turned off. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.17 | NodetrapDM1000UserOpticalOffAlarm | This trap is issued when the User Optical Power is turned off. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.18 | NodetrapDM1000UserSBSOffAlarm | This trap is issued when the User SBS is turned off. | ||
| 1.3.6.1.4.1.1166.6.1.2.28.19 | NodetrapDM1000RFInputAlarm | This trap is issued when the Laser Modules RF input parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parame… | ||
| 1.3.6.1.4.1.1166.6.1.2.28.20 | NodetrapDM1000RFOverloadAlarm | This trap is issued when the Laser Modules RF overload parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this par… |