OMNI-gx2EDFA-MIB
271 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.11.1 | Nodegx2EDFADescriptor | |||
| 1.3.6.1.4.1.1166.6.1.2.11.1 | NodetrapEDFAConfigChangeInteger | This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain curre… | ||
| 1.3.6.1.4.1.1166.6.1.2.11.2 | Tablegx2EDFAAnalogTable | not-accessible | mandatory | This table contains gx2EDFA specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.11.2 | NodetrapEDFAConfigChangeDisplayString | This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may … | ||
| 1.3.6.1.4.1.1166.6.1.2.11.2.1 | Rowgx2EDFAAnalogEntry | not-accessible | mandatory | This list contains digital product class and the associated RF channel parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.1 | Columnedfagx2EDFAAnalogTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.2 | ColumnedfalabelModTemp | read-only | optional | The value of this object provides the label of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.3 | ColumnedfauomModTemp | read-only | optional | The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.4 | ColumnedfamajorHighModTemp | read-only | mandatory | The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.5 | ColumnedfamajorLowModTemp | read-only | mandatory | The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.6 | ColumnedfaminorHighModTemp | read-only | mandatory | The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.7 | ColumnedfaminorLowModTemp | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.8 | ColumnedfacurrentValueModTemp | read-only | mandatory | The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.9 | ColumnedfastateFlagModTemp | read-only | mandatory | The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.10 | ColumnedfaminValueModTemp | read-only | mandatory | The value of this object provides the minimum value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.11 | ColumnedfamaxValueModTemp | read-only | mandatory | The value of this object provides the maximum value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.12 | ColumnedfaalarmStateModTemp | read-only | mandatory | The value of this object provides the curent alarm state of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.13 | ColumnedfalabelOptInPower | read-only | optional | The value of this object provides the label of the Optical Input Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.14 | ColumnedfauomOptInPower | read-only | optional | The value of this object provides the Unit of Measure of the Optical Input Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.15 | ColumnedfamajorHighOptInPower | read-only | mandatory | The value of this object provides the Major High alarm value of the Optical Input Power Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.16 | ColumnedfamajorLowOptInPower | read-only | mandatory | The value of this object provides the Major Low alarm value of the Optical Input Power Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.17 | ColumnedfaminorHighOptInPower | read-only | mandatory | The value of this object provides the Minor High alarm value of the Optical Input Power Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.18 | ColumnedfaminorLowOptInPower | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Optical Input Power Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.19 | ColumnedfacurrentValueOptInPower | read-only | mandatory | The value of this object provides the Current value of the Optical Input Power Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.20 | ColumnedfastateFlagOptInPower | read-only | mandatory | The value of this object provides the state of the Optical Input Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.21 | ColumnedfaminValueOptInPower | read-only | mandatory | The value of this object provides the minimum value of the Optical Input Power Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.22 | ColumnedfamaxValueOptInPower | read-only | mandatory | The value of this object provides the maximum value of the Optical Input Power Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.23 | ColumnedfaalarmStateOptInPower | read-only | mandatory | The value of this object provides the curent alarm state of the Optical Input Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.24 | ColumnedfalabelOptOutPower | read-only | optional | The value of this object provides the label of the Optical Output Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.25 | ColumnedfauomOptOutPower | read-only | optional | The value of this object provides the Unit of Measure of the Optical Output Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.26 | ColumnedfamajorHighOptOutPower | read-only | mandatory | The value of this object provides the Major High alarm value of the Optical Output Power Analog parameter. This value is a floating point number that is repres… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.27 | ColumnedfamajorLowOptOutPower | read-only | mandatory | The value of this object provides the Major Low alarm value of the Optical Output Power Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.28 | ColumnedfaminorHighOptOutPower | read-only | mandatory | The value of this object provides the Minor High alarm value of the Optical Output Power Analog parameter. This value is a floating point number that is repres… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.29 | ColumnedfaminorLowOptOutPower | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Optical Output Power Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.30 | ColumnedfacurrentValueOptOutPower | read-only | mandatory | The value of this object provides the Current value of the Optical Output Power Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.31 | ColumnedfastateFlagOptOutPower | read-only | mandatory | The value of this object provides the state of the Optical Output Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.32 | ColumnedfaminValueOptOutPower | read-only | mandatory | The value of this object provides the minimum value of the Optical Output Power Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.33 | ColumnedfamaxValueOptOutPower | read-only | mandatory | The value of this object provides the maximum value of the Optical Output Power Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.34 | ColumnedfaalarmStateOptOutPower | read-only | mandatory | The value of this object provides the curent alarm state of the Optical Output Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.35 | ColumnedfalabelTECTemp | read-only | optional | The value of this object provides the label of the TEC Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.36 | ColumnedfauomTECTemp | read-only | optional | The value of this object provides the Unit of Measure of the TEC Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.37 | ColumnedfamajorHighTECTemp | read-only | mandatory | The value of this object provides the Major High alarm value of the TEC Temperature Analog parameter. This value is a floating point number that is represented… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.38 | ColumnedfamajorLowTECTemp | read-only | mandatory | The value of this object provides the Major Low alarm value of the TEC Temperature Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.39 | ColumnedfaminorHighTECTemp | read-only | mandatory | The value of this object provides the Minor High alarm value of the TEC Temperature Analog parameter. This value is a floating point number that is represented… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.40 | ColumnedfaminorLowTECTemp | read-only | mandatory | The value of this object provides the Minor Low alarm value of the TEC Temperature Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.41 | ColumnedfacurrentValueTECTemp | read-only | mandatory | The value of this object provides the Current value of the TEC Temperature Analog parameter. This value is a floating point number that is represented as an IE… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.42 | ColumnedfastateFlagTECTemp | read-only | mandatory | The value of this object provides the state of the TEC Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.43 | ColumnedfaminValueTECTemp | read-only | mandatory | The value of this object provides the minimum value of the TEC Temperature Analog parameter. This value is a floating point number that is represented as an IE… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.44 | ColumnedfamaxValueTECTemp | read-only | mandatory | The value of this object provides the maximum value of the TEC Temperature Analog parameter. This value is a floating point number that is represented as an IE… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.45 | ColumnedfaalarmStateTECTemp | read-only | mandatory | The value of this object provides the curent alarm state of the TEC Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.46 | ColumnedfalabelTECCurrent | read-only | optional | The value of this object provides the label of the TEC Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.47 | ColumnedfauomTECCurrent | read-only | optional | The value of this object provides the Unit of Measure of the TEC Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.48 | ColumnedfamajorHighTECCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.49 | ColumnedfamajorLowTECCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.50 | ColumnedfaminorHighTECCurrent | read-only | mandatory | The value of this object provides the Minor High alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.51 | ColumnedfaminorLowTECCurrent | read-only | mandatory | The value of this object provides the Minor Low alarm value of the TEC Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.52 | ColumnedfacurrentValueTECCurrent | read-only | mandatory | The value of this object provides the Current value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.53 | ColumnedfastateFlagTECCurrent | read-only | mandatory | The value of this object provides the state of the TEC Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.54 | ColumnedfaminValueTECCurrent | read-only | mandatory | The value of this object provides the minimum value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.55 | ColumnedfamaxValueTECCurrent | read-only | mandatory | The value of this object provides the maximum value of the TEC Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.56 | ColumnedfaalarmStateTECCurrent | read-only | mandatory | The value of this object provides the curent alarm state of the TEC Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.57 | ColumnedfalabelLaserCurrent | read-only | optional | The value of this object provides the label of the Laser Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.58 | ColumnedfauomLaserCurrent | read-only | optional | The value of this object provides the Unit of Measure of the Laser Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.59 | ColumnedfamajorHighLaserCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the Laser Current Analog parameter. This value is a floating point number that is represented a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.60 | ColumnedfamajorLowLaserCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the Laser Current Analog parameter. This value is a floating point number that is represented as… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.61 | ColumnedfaminorHighLaserCurrent | read-only | mandatory | The value of this object provides the Minor High alarm value of the Laser Current Analog parameter. This value is a floating point number that is represented a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.62 | ColumnedfaminorLowLaserCurrent | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Laser Current Analog parameter. This value is a floating point number that is represented as… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.63 | ColumnedfacurrentValueLaserCurrent | read-only | mandatory | The value of this object provides the Current value of the Laser Current Analog parameter. This value is a floating point number that is represented as an IEEE… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.64 | ColumnedfastateFlagLaserCurrent | read-only | mandatory | The value of this object provides the state of the Laser Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.65 | ColumnedfaminValueLaserCurrent | read-only | mandatory | The value of this object provides the minimum value of the Laser Current Analog parameter. This value is a floating point number that is represented as an IEEE… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.66 | ColumnedfamaxValueLaserCurrent | read-only | mandatory | The value of this object provides the maximum value of the Laser Current Analog parameter. This value is a floating point number that is represented as an IEEE… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.67 | ColumnedfaalarmStateLaserCurrent | read-only | mandatory | The value of this object provides the curent alarm state of the Laser Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.68 | ColumnedfalabelLaserPower | read-only | optional | The value of this object provides the label of the Laser Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.69 | ColumnedfauomLaserPower | read-only | optional | The value of this object provides the Unit of Measure of the Laser Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.70 | ColumnedfamajorHighLaserPower | read-only | mandatory | The value of this object provides the Major High alarm value of the Laser Power Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.71 | ColumnedfamajorLowLaserPower | read-only | mandatory | The value of this object provides the Major Low alarm value of the Laser Power Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.72 | ColumnedfaminorHighLaserPower | read-only | mandatory | The value of this object provides the Minor High alarm value of the Laser Power Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.73 | ColumnedfaminorLowLaserPower | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Laser Power Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.74 | ColumnedfacurrentValueLaserPower | read-only | mandatory | The value of this object provides the Current value of the Laser Power Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.75 | ColumnedfastateFlagLaserPower | read-only | mandatory | The value of this object provides the state of the Laser Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.76 | ColumnedfaminValueLaserPower | read-only | mandatory | The value of this object provides the minimum value of the Laser Power Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.77 | ColumnedfamaxValueLaserPower | read-only | mandatory | The value of this object provides the maximum value of the Laser Power Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.78 | ColumnedfaalarmStateLaserPower | read-only | mandatory | The value of this object provides the curent alarm state of the Laser Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.79 | Columnedfalabel12Volt | read-only | optional | The value of this object provides the label of the 12v Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.80 | Columnedfauom12Volt | read-only | optional | The value of this object provides the Unit of Measure of the 12v Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.81 | ColumnedfamajorHigh12Volt | read-only | mandatory | The value of this object provides the Major High alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.82 | ColumnedfamajorLow12Volt | read-only | mandatory | The value of this object provides the Major Low alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.83 | ColumnedfaminorHigh12Volt | read-only | mandatory | The value of this object provides the Minor High alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.84 | ColumnedfaminorLow12Volt | read-only | mandatory | The value of this object provides the Minor Low alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.85 | ColumnedfacurrentValue12Volt | read-only | mandatory | The value of this object provides the Current value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IE… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.86 | ColumnedfastateFlag12Volt | read-only | mandatory | The value of this object provides the state of the 12v Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.87 | ColumnedfaminValue12Volt | read-only | mandatory | The value of this object provides the minimum value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IE… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.88 | ColumnedfamaxValue12Volt | read-only | mandatory | The value of this object provides the maximum value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IE… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.89 | ColumnedfaalarmState12Volt | read-only | mandatory | The value of this object provides the curent alarm state of the 12v Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.90 | Columnedfalabel37Volt | read-only | optional | The value of this object provides the label of the 3.7v Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.91 | Columnedfauom37Volt | read-only | optional | The value of this object provides the Unit of Measure of the 3.7v Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.92 | ColumnedfamajorHigh37Volt | read-only | mandatory | The value of this object provides the Major High alarm value of the 3.7 Volt Current Analog parameter. This value is a floating point number that is represente… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.93 | ColumnedfamajorLow37Volt | read-only | mandatory | The value of this object provides the Major Low alarm value of the 3.7 Volt Current Analog parameter. This value is a floating point number that is represented… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.94 | ColumnedfaminorHigh37Volt | read-only | mandatory | The value of this object provides the Minor High alarm value of the 3.7 Volt Current Analog parameter. This value is a floating point number that is represente… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.95 | ColumnedfaminorLow37Volt | read-only | mandatory | The value of this object provides the Minor Low alarm value of the 3.7 Volt Current Analog parameter. This value is a floating point number that is represented… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.96 | ColumnedfacurrentValue37Volt | read-only | mandatory | The value of this object provides the Current value of the 3.7 Volt Current Analog parameter. This value is a floating point number that is represented as an I… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.97 | ColumnedfastateFlag37Volt | read-only | mandatory | The value of this object provides the state of the 3.7v Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.98 | ColumnedfaminValue37Volt | read-only | mandatory | The value of this object provides the minimum value of the 3.7 Volt Current Analog parameter. This value is a floating point number that is represented as an I… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.99 | ColumnedfamaxValue37Volt | read-only | mandatory | The value of this object provides the maximum value of the 3.7 Volt Current Analog parameter. This value is a floating point number that is represented as an I… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.100 | ColumnedfaalarmState37Volt | read-only | mandatory | The value of this object provides the curent alarm state of the 3.7v Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.101 | ColumnedfalabelFanCurrent | read-only | optional | The value of this object provides the label of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.102 | ColumnedfauomFanCurrent | read-only | optional | The value of this object provides the Unit of Measure of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.103 | ColumnedfamajorHighFanCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.104 | ColumnedfamajorLowFanCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.105 | ColumnedfaminorHighFanCurrent | read-only | mandatory | The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.106 | ColumnedfaminorLowFanCurrent | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.107 | ColumnedfacurrentValueFanCurrent | read-only | mandatory | The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.108 | ColumnedfastateFlagFanCurrent | read-only | mandatory | The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.109 | ColumnedfaminValueFanCurrent | read-only | mandatory | The value of this object provides the minimum value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.110 | ColumnedfamaxValueFanCurrent | read-only | mandatory | The value of this object provides the maximum value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.111 | ColumnedfaalarmStateFanCurrent | read-only | mandatory | The value of this object provides the curent alarm state of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.112 | ColumnedfalabelOPSetting | read-only | optional | The value of this object provides the label of the Output Power Setting Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.113 | ColumnedfauomOPSetting | read-only | optional | The value of this object provides the Unit of Measure of the 12v Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.114 | ColumnedfamajorHighOPSetting | read-only | mandatory | The value of this object provides the Major High alarm value of the Output Power Setting Analog parameter. This value is a floating point number that is repres… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.115 | ColumnedfamajorLowOPSetting | read-only | mandatory | The value of this object provides the Major Low alarm value of the Output Power Setting Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.116 | ColumnedfaminorHighOPSetting | read-only | mandatory | The value of this object provides the Minor High alarm value of the Output Power Setting Analog parameter. This value is a floating point number that is repres… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.117 | ColumnedfaminorLowOPSetting | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Output Power Setting Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.118 | ColumnedfacurrentValueOPSetting | read-write | mandatory | The value of this object provides the Current value of the Output Power Setting Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.119 | ColumnedfastateFlagOPSetting | read-only | mandatory | The value of this object provides the state of the Output Power Setting Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.120 | ColumnedfaminValueOPSetting | read-only | mandatory | The value of this object provides the minimum value of the Output Power Setting Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.121 | ColumnedfamaxValueOPSetting | read-only | mandatory | The value of this object provides the maximum value of the Output Power Setting Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.122 | ColumnedfaalarmStateOPSetting | read-only | mandatory | The value of this object provides the curent alarm state of the Output Power Setting Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.123 | ColumnedfalabelLPSetting | read-only | optional | The value of this object provides the label of the Laser Power Setting Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.124 | ColumnedfauomLPSetting | read-only | optional | The value of this object provides the Unit of Measure of the Laser Power Setting Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.125 | ColumnedfamajorHighLPSetting | read-only | mandatory | The value of this object provides the Major High alarm value of the Laser Power Setting Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.126 | ColumnedfamajorLowLPSetting | read-only | mandatory | The value of this object provides the Major Low alarm value of the Laser Power Setting Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.127 | ColumnedfaminorHighLPSetting | read-only | mandatory | The value of this object provides the Minor High alarm value of the Laser Power Setting Analog parameter. This value is a floating point number that is represe… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.128 | ColumnedfaminorLowLPSetting | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Laser Power Setting Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.129 | ColumnedfacurrentValueLPSetting | read-write | mandatory | The value of this object provides the Current value of the Laser Power Setting Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.130 | ColumnedfastateFlagLPSetting | read-only | mandatory | The value of this object provides the state of the Laser Power Setting Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.131 | ColumnedfaminValueLPSetting | read-only | mandatory | The value of this object provides the minimum value of the Laser Power Setting Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.132 | ColumnedfamaxValueLPSetting | read-only | mandatory | The value of this object provides the maximum value of the Laser Power Setting Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.133 | ColumnedfaalarmStateLPSetting | read-only | mandatory | The value of this object provides the curent alarm state of the Laser Power Setting Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.134 | ColumnedfalabelCGSetting | read-only | optional | The value of this object provides the label of the Constant Gain Setting Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.135 | ColumnedfauomCGSetting | read-only | optional | The value of this object provides the Unit of Measure of the Constant Gain Setting Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.136 | ColumnedfamajorHighCGSetting | read-only | mandatory | The value of this object provides the Major High alarm value of the Constant Gain Setting Analog parameter. This value is a floating point number that is repre… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.137 | ColumnedfamajorLowCGSetting | read-only | mandatory | The value of this object provides the Major Low alarm value of the Constant Gain Setting Analog parameter. This value is a floating point number that is repres… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.138 | ColumnedfaminorHighCGSetting | read-only | mandatory | The value of this object provides the Minor High alarm value of the Constant Gain Setting Analog parameter. This value is a floating point number that is repre… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.139 | ColumnedfaminorLowCGSetting | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Constant Gain Setting Analog parameter. This value is a floating point number that is repres… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.140 | ColumnedfacurrentValueCGSetting | read-write | mandatory | The value of this object provides the Current value of the Constant Gain Setting Analog parameter. This value is a floating point number that is represented as… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.141 | ColumnedfastateFlagCGSetting | read-only | mandatory | The value of this object provides the state of the Constant Gain Setting Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.142 | ColumnedfaminValueCGSetting | read-only | mandatory | The value of this object provides the minimum value of the Constant Gain Setting Analog parameter. This value is a floating point number that is represented as… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.143 | ColumnedfamaxValueCGSetting | read-only | mandatory | The value of this object provides the maximum value of the Constant Gain Setting Analog parameter. This value is a floating point number that is represented as… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.144 | ColumnedfaalarmStateCGSetting | read-only | mandatory | The value of this object provides the curent alarm state of the Constant Gain Setting Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.145 | ColumnedfalabelOptThreshold | read-only | optional | The value of this object provides the label of the Optical Input Threshold Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.146 | ColumnedfauomOptThreshold | read-only | optional | The value of this object provides the Unit of Measure of the Optical Input Threshold Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.147 | ColumnedfamajorHighOptThreshold | read-only | mandatory | The value of this object provides the Major High alarm value of the Optical Input Threshold Analog parameter. This value is a floating point number that is rep… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.148 | ColumnedfamajorLowOptThreshold | read-only | mandatory | The value of this object provides the Major Low alarm value of the Optical Input Threshold Analog parameter. This value is a floating point number that is repr… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.149 | ColumnedfaminorHighOptThreshold | read-only | mandatory | The value of this object provides the Minor High alarm value of the Optical Input Threshold Analog parameter. This value is a floating point number that is rep… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.150 | ColumnedfaminorLowOptThreshold | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Optical Input Threshold Analog parameter. This value is a floating point number that is repr… |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.151 | ColumnedfacurrentValueOptThreshold | read-write | mandatory | The value of this object provides the Current value of the Optical Input Threshold Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.152 | ColumnedfastateFlagOptThreshold | read-only | mandatory | The value of this object provides the state of the Optical Input Threshold Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.153 | ColumnedfaminValueOptThreshold | read-only | mandatory | The value of this object provides the minimum value of the Optical Input Threshold Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.154 | ColumnedfamaxValueOptThreshold | read-only | mandatory | The value of this object provides the maximum value of the Optical Input Threshold Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.11.2.1.155 | ColumnedfaalarmStateOptThreshold | read-only | mandatory | The value of this object provides the curent alarm state of the Optical Input Threshold Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.3 | Tablegx2EDFADigitalTable | not-accessible | mandatory | This table contains gx2EDFA specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.11.3 | NodetrapEDFAModuleTemperatureAlarm | This trap is issued when the EDFA Module's Temperature goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.3.2 | Rowgx2EDFADigitalEntry | not-accessible | mandatory | This list contains digital product class and the associated RF channel parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.1 | Columnedfagx2EDFADigitalTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.2 | ColumnedfalabelModeSetting | read-only | optional | The value of this object provides the label of the EDFA's Mode Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.3 | ColumnedfaenumModeSetting | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.4 | ColumnedfavalueModeSetting | read-write | mandatory | The value of this object is the current value of the parameter. It is an integer value from 0 to 5 representing the operation mode of the module. |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.5 | ColumnedfastateFlagModeSetting | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.6 | ColumnedfalabelModuleState | read-only | optional | The value of this object provides the label of the Module State Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.7 | ColumnedfaenumModuleState | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.8 | ColumnedfavalueModuleState | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.9 | ColumnedfastateFlagModuleState | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.10 | ColumnedfalabelFactoryDefault | read-only | optional | The value of this object provides the label of the Factory Default Reset Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.11 | ColumnedfaenumFactoryDefault | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.12 | ColumnedfavalueFactoryDefault | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.3.2.13 | ColumnedfastateFlagFactoryDefault | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4 | Tablegx2EDFAStatusTable | not-accessible | mandatory | This table contains gx2EDFA specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.11.4 | NodetrapEDFAOpticalInPowerAlarm | This trap is issued when the input Optical Input Power parameter goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.4.3 | Rowgx2EDFAStatusEntry | not-accessible | mandatory | This list contains digital product class and the associated RF channel parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.1 | Columnedfagx2EDFAStatusTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.2 | ColumnedfalabelBoot | read-only | optional | The value of this object provides the label of the Boot Status Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.3 | ColumnedfavalueBoot | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.4 | ColumnedfastateflagBoot | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.5 | ColumnedfalabelFlash | read-only | optional | The value of this object provides the label of the Flash Status Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.6 | ColumnedfavalueFlash | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.7 | ColumnedfastateflagFlash | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.8 | ColumnedfalabelFactoryDataCRC | read-only | optional | The value of this object provides the label of the Factory Data CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.9 | ColumnedfavalueFactoryDataCRC | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.10 | ColumnedfastateflagFactoryDataCRC | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.11 | ColumnedfalabelAlarmDataCRC | read-only | optional | The value of this object provides the label of the Alarm Data CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.12 | ColumnedfavalueAlarmDataCRC | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.13 | ColumnedfastateflagAlarmDataCRC | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.14 | ColumnedfalabelCalibrationDataCRC | read-only | optional | The value of this object provides the label of the Calibration Data CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.15 | ColumnedfavalueCalibrationDataCRC | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.16 | ColumnedfastateflagCalibrationDataCRC | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.17 | ColumnedfalabelOptInShutdown | read-only | optional | The value of this object provides the label of the Optical Input Power Shutdown Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.18 | ColumnedfavalueOptInShutdown | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.19 | ColumnedfastateflagOptInShutdown | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.20 | ColumnedfalabelTECTempShutdown | read-only | optional | The value of this object provides the label of the TEC Temperature Shutdown Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.21 | ColumnedfavalueTECTempShutdown | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.22 | ColumnedfastateflagTECTempShutdown | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.23 | ColumnedfalabelTECShutOverride | read-only | optional | The value of this object provides the label of the TEC Shutdown Override Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.24 | ColumnedfavalueTECShutOverride | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.25 | ColumnedfastateflagTECShutOverride | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.26 | ColumnedfalabelPowerFail | read-only | optional | The value of this object provides the label of the Power Supply Fail Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.27 | ColumnedfavaluePowerFail | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.28 | ColumnedfastateflagPowerFail | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.29 | ColumnedfalabelKeySwitch | read-only | optional | The value of this object provides the label of the Key Switch Setting Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.30 | ColumnedfavalueKeySwitch | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.31 | ColumnedfastateflagKeySwitch | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.32 | ColumnedfalabelLaserCurrShutdown | read-only | optional | The value of this object provides the label of the Laser Current Shutdown Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.33 | ColumnedfavalueLaserCurrShutdown | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.34 | ColumnedfastateflagLaserCurrShutdown | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.35 | ColumnedfalabelLaserPowShutdown | read-only | optional | The value of this object provides the label of the Laser Power Shutdown Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.36 | ColumnedfavalueLaserPowShutdown | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.37 | ColumnedfastateflagLaserPowShutdown | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.38 | ColumnedfalabelADCStatus | read-only | optional | The value of this object provides the label of the ADC Operation Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.39 | ColumnedfavalueADCStatus | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.40 | ColumnedfastateflagADCStatus | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.41 | ColumnedfalabelConstGainStatus | read-only | optional | The value of this object provides the label of the Constant Gain Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.42 | ColumnedfavalueConstGainStatus | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.43 | ColumnedfastateflagConstGainStatus | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.44 | ColumnedfalabelStandbyStatus | read-only | optional | The value of this object provides the label of the Standby Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.45 | ColumnedfavalueStandbyStatus | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.11.4.3.46 | ColumnedfastateflagStandbyStatus | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.11.5 | Tablegx2EDFAFactoryTable | not-accessible | mandatory | This table contains gx2EDFA specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.11.5 | NodetrapEDFAOpticalOutPowerAlarm | This trap is issued when the input Optical Output Power parameter goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.5.4 | Rowgx2EDFAFactoryEntry | not-accessible | mandatory | This list contains digital product class and the associated RF channel parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.1 | Columnedfagx2EDFAFactoryTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.2 | ColumnedfabootControlByte | read-only | mandatory | The value of this object indicates which bank the firmware is currently being boot from. |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.3 | ColumnedfabootStatusByte | read-only | mandatory | This object indicates the status of the last boot |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.4 | Columnedfabank0CRC | read-only | mandatory | This object provides the CRC code of bank 0. |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.5 | Columnedfabank1CRC | read-only | mandatory | This object provides the CRC code of bank 1. |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.6 | ColumnedfaprgEEPROMByte | read-only | mandatory | This object indicates if the EEPROM has been programmed |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.7 | ColumnedfafactoryCRC | read-only | mandatory | This object provides the CRC code for the Factory data. |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.8 | ColumnedfacalculateCRC | read-only | mandatory | This object indicates which of the Emnums will have the CRC calculated. |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.9 | ColumnedfahourMeter | read-only | mandatory | This object provides the hour meter reading of the module. |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.10 | ColumnedfaflashPrgCntA | read-only | mandatory | This object provides the number of times the flash has been programmed on side A. |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.11 | ColumnedfaflashPrgCntB | read-only | mandatory | This object provides the number of times the flash has been programmed on side B. |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.12 | ColumnedfafwRev0 | read-only | mandatory | This object provides the Revision of the firmware stores in bank 0. |
| 1.3.6.1.4.1.1166.6.1.2.11.5.4.13 | ColumnedfafwRev1 | read-only | mandatory | This object provides the Revision of the firmware stores in bank 1. |
| 1.3.6.1.4.1.1166.6.1.2.11.6 | Tablegx2EDFAHoldTimeTable | not-accessible | mandatory | This table contains gx2EDFA specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.11.6 | NodetrapEDFATECTemperatureAlarm | This trap is issued when the EDFA TEC Temperature goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.6.5 | Rowgx2EDFAHoldTimeEntry | not-accessible | mandatory | This list contains digital product class and the associated RF channel parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.11.6.5.1 | Columngx2EDFAHoldTimeTableIndex | read-only | mandatory | The value of this object is the index of the data object. |
| 1.3.6.1.4.1.1166.6.1.2.11.6.5.2 | Columngx2EDFAHoldTimeSpecIndex | read-only | mandatory | The value of this object identifies the index of the alarm object to be modified. |
| 1.3.6.1.4.1.1166.6.1.2.11.6.5.3 | Columngx2EDFAHoldTimeData | read-write | mandatory | The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered… |
| 1.3.6.1.4.1.1166.6.1.2.11.7 | NodetrapEDFATECCurrentAlarm | This trap is issued when the EDFA TEC Current goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.8 | NodetrapEDFALaserCurrentAlarm | This trap is issued when the EDFA Laser Current goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.9 | NodetrapEDFALaserPowerAlarm | This trap is issued when the EDFA Laser Power goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.10 | NodetrapEDFAPlus12CurrentAlarm | This trap is issued when the EDFA 12 volt current parameter goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.11 | NodetrapEDFAPlus37CurrentAlarm | This trap is issued when the EDFA 3.7 volt current parameter goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.12 | NodetrapEDFAFanCurrentAlarm | This trap is issued when the EDFA Module's Fan Currrent parameter goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.13 | NodetrapEDFAResetFacDefault | This trap is issued when the EDFA resets to factory defaults | ||
| 1.3.6.1.4.1.1166.6.1.2.11.14 | NodetrapEDFAStandbyMode | This trap is issued when the EDFA is in Standby Mode. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.15 | NodetrapEDFAOptInShutdown | This trap is issued when the EDFA is in Optical Input Shutdown. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.16 | NodetrapEDFATECTempShutdown | This trap is issued when the EDFA is in TEC Temperature Shutdown. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.17 | NodetrapEDFAKeySwitch | This trap is issued when the Key Switch disables the EDFA. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.18 | NodetrapEDFAPowerFail | This trap is issued when there is an EDFA Power Supply Failure. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.19 | NodetrapEDFALasCurrShutdown | This trap is issued when the EDFA is in Laser Current Shutdown. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.20 | NodetrapEDFALasPowerShutdown | This trap is issued when the EDFA is in Laser Power Shutdown. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.21 | NodetrapEDFAInvalidMode | This trap is issued when the EDFA is in an invalid mode. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.22 | NodetrapEDFAFlashAlarm | This trap is issued when the EDFA Module's boot or flash programming sequence has detected a Flash error. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.23 | NodetrapEDFABoot0Alarm | This trap is issued when the EDFA Module's Bank 0 Boot sequence has detected an error. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.24 | NodetrapEDFABoot1Alarm | This trap is issued when the EDFA Module's Bank 1 Boot sequence has detected an error. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.25 | NodetrapEDFAAlarmDataCRCAlarm | This trap is issued when the EDFA Module detects an error calculating the alarm limit CRC. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.26 | NodetrapEDFAFactoryDataCRCAlarm | This trap is issued when the EDFA Module detects an error calculating the Factory data CRC. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.27 | NodetrapEDFACalDataCRCAlarm | This trap is issued when the EDFA Module detects an error calculating the Calibration data CRC. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.28 | NodetrapEDFAFacCalFloatAlarm | This trap is issued when the EDFA Module detects factory calibration float data alarm. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.29 | NodetrapEDFAOptInThreshAlarm | This trap is issued when the EDFA Module Optical Input drops below the user set threshold. | ||
| 1.3.6.1.4.1.1166.6.1.2.11.30 | NodetrapEDFAGainErrorAlarm | This trap is issued when the EDFA Module cannot produce the desired user set gain in Constant Gain Set Mode. |