OMNI-gx2OSW10B-MIB
174 objects
No module-level DESCRIPTION found.
Imported Objects
| GX2HFC-MIB | gx2Osw10b |
| NLS-BBNIDENT-MIB | -- gi motproxies -- |
| NLSBBN-TRAPS-MIB | trapChangedObjectId trapChangedValueDisplayString trapChangedValueInteger trapIdentifier trapNETrapLastTrapTimeStamp trapNetworkElemAdminState trapNetworkElemAlarmStatus trapNetworkElemAvailStatus trapNetworkElemModelNumber trapNetworkElemOperState trapNetworkElemSerialNum trapPerceivedSeverity trapText |
| RFC-1212 | -- OBJECT-TYPE -- |
| RFC-1215 | -- TRAP-TYPE -- |
| RFC1155-SMI | -- IpAddress TimeTicks -- |
| RFC1213-MIB | -- sysUpTime DisplayString -- |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.15.1 | Nodegx2Osw10bDescriptor | |||
| 1.3.6.1.4.1.1166.6.1.2.15.1 | NodetrapOSW10BConfigChangeInteger | This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain curre… | ||
| 1.3.6.1.4.1.1166.6.1.2.15.2 | Tablegx2Osw10bAnalogTable | not-accessible | mandatory | This table contains gx2Osw10b specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.15.2 | NodetrapOSW10BConfigChangeDisplayString | This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may … | ||
| 1.3.6.1.4.1.1166.6.1.2.15.2.1 | Rowgx2Osw10bAnalogEntry | not-accessible | mandatory | This list contains the analog parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.1 | Columngx2Osw10bAnalogTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.2 | Columnosw10blabelPriOpticalInputLevel | read-only | optional | The value of this object provides the label of the Primary Optical Input Level Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.3 | Columnosw10buomPriOpticalInputLevel | read-only | optional | The value of this object provides the Unit of Measure of the Primary Optical Input Level Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.4 | Columnosw10bmajorHighPriOpticalInputLevel | read-only | mandatory | The value of this object provides the Major High alarm value of the Primary Optical Input Level Analog parameter. This value is a floating point number that is… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.5 | Columnosw10bmajorLowPriOpticalInputLevel | read-only | mandatory | The value of this object provides the Major Low alarm value of the Primary Optical Input Level Analog parameter. This value is a floating point number that is … |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.6 | Columnosw10bminorHighPriOpticalInputLevel | read-only | mandatory | The value of this object provides the Minor High alarm value of the Primary Optical Input Level Analog parameter. This value is a floating point number that is… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.7 | Columnosw10bminorLowPriOpticalInputLevel | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Primary Optical Input Level Analog parameter. This value is a floating point number that is … |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.8 | Columnosw10bcurrentValuePriOpticalInputLevel | read-only | mandatory | The value of this object provides the Current value of the Primary Optical Input Level Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.9 | Columnosw10bstateFlagPriOpticalInputLevel | read-only | mandatory | The value of this object provides the state of the Primary Optical Input Level Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.10 | Columnosw10bminValuePriOpticalInputLevel | read-only | mandatory | The value of this object provides the minimum value the Primary Optical Input Level Analog parameter can achive. This value is a floating point number that is … |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.11 | Columnosw10bmaxValuePriOpticalInputLevel | read-only | mandatory | The value of this object provides the maximum value the Primary Optical Input Level Analog parameter can achieve. This value is a floating point number that is… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.12 | Columnosw10balarmStatePriOpticalInputLevel | read-only | mandatory | The value of this object provides the current alarm state of the Primary Optical Input Level Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.13 | Columnosw10blabelSecOpticalInputLevel | read-only | optional | The value of this object provides the label of the Secondary Optical Input Level Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.14 | Columnosw10buomSecOpticalInputLevel | read-only | optional | The value of this object provides the Unit of Measure of the Secondary Optical Input Level Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.15 | Columnosw10bmajorHighSecOpticalInputLevel | read-only | mandatory | The value of this object provides the Major High alarm value of the Secondary Optical Input Level Analog parameter. This value is a floating point number that … |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.16 | Columnosw10bmajorLowSecOpticalInputLevel | read-only | mandatory | The value of this object provides the Major Low alarm value of the Secondary Optical Input Level Analog parameter. This value is a floating point number that i… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.17 | Columnosw10bminorHighSecOpticalInputLevel | read-only | mandatory | The value of this object provides the Minor High alarm value of the Secondary Optical Input Level Analog parameter. This value is a floating point number that … |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.18 | Columnosw10bminorLowSecOpticalInputLevel | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Secondary Optical Input Level Analog parameter. This value is a floating point number that i… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.19 | Columnosw10bcurrentValueSecOpticalInputLevel | read-only | mandatory | The value of this object provides the Current value of the Secondary Optical Input Level Analog parameter. This value is a floating point number that is repres… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.20 | Columnosw10bstateFlagSecOpticalInputLevel | read-only | mandatory | The value of this object provides the state of the Secondary Optical Input Level Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.21 | Columnosw10bminValueSecOpticalInputLevel | read-only | mandatory | The value of this object provides the minimum value the Secondary Optical Input Level Analog parameter can achive. This value is a floating point number that i… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.22 | Columnosw10bmaxValueSecOpticalInputLevel | read-only | mandatory | The value of this object provides the maximum value the Secondary Optical Input Level Analog parameter can achive. This value is a floating point number that i… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.23 | Columnosw10balarmStateSecOpticalInputLevel | read-only | mandatory | The value of this object provides the curent alarm state of the Secondary Optical Input Level Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.24 | Columnosw10blabelPriOpticalThreshold | read-only | optional | The value of this object provides the label of the Primary Optical Input Threshold Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.25 | Columnosw10buomPriOpticalThreshold | read-only | optional | The value of this object provides the Unit of Measure of the Primary Optical Input Threshold Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.26 | Columnosw10bmajorHighPriOpticalThreshold | read-only | mandatory | The value of this object provides the Major High alarm value of the Primary Optical Input Threshold Analog parameter. This value is a floating point number tha… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.27 | Columnosw10bmajorLowPriOpticalThreshold | read-only | mandatory | The value of this object provides the Major Low alarm value of the Primary Optical Input Threshold Analog parameter. This value is a floating point number that… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.28 | Columnosw10bminorHighPriOpticalThreshold | read-only | mandatory | The value of this object provides the Minor High alarm value of the Primary Optical Input Threshold Analog parameter. This value is a floating point number tha… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.29 | Columnosw10bminorLowPriOpticalThreshold | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Primary Optical Input Threshold Analog parameter. This value is a floating point number that… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.30 | Columnosw10bcurrentValuePriOpticalThreshold | read-write | mandatory | The value of this object provides the Current value of the Primary Optical Input Threshold Analog parameter. This value is a floating point number that is repr… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.31 | Columnosw10bstateFlagPriOpticalThreshold | read-only | mandatory | The value of this object provides the state of the Primary Optical Input Threshold Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.32 | Columnosw10bminValuePriOpticalThreshold | read-write | mandatory | The value of this object provides the minimum value the Primary Optical Input Threshold Analog parameter can achive. This value is a floating point number that… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.33 | Columnosw10bmaxValuePriOpticalThreshold | read-only | mandatory | The value of this object provides the maximum value the Primary Optical Input Threshold Analog parameter can achive. This value is a floating point number that… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.34 | Columnosw10balarmStatePriOpticalThreshold | read-only | mandatory | The value of this object provides the curent alarm state of the Primary Optical Threshold Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.35 | Columnosw10blabelSecOpticalThreshold | read-only | optional | The value of this object provides the label of the Secondary Optical Input Threshold Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.36 | Columnosw10buomSecOpticalThreshold | read-only | optional | The value of this object provides the Unit of Measure of the Secondary Optical Input Threshold Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.37 | Columnosw10bmajorHighSecOpticalThreshold | read-only | mandatory | The value of this object provides the Major High alarm value of the Secondary Optical Input Threshold Analog parameter. This value is a floating point number t… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.38 | Columnosw10bmajorLowSecOpticalThreshold | read-only | mandatory | The value of this object provides the Major Low alarm value of the Secondary Optical Input Threshold Analog parameter. This value is a floating point number th… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.39 | Columnosw10bminorHighSecOpticalThreshold | read-only | mandatory | The value of this object provides the Minor High alarm value of the Secondary Optical Input Threshold Analog parameter. This value is a floating point number t… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.40 | Columnosw10bminorLowSecOpticalThreshold | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Secondary Optical Input Threshold Analog parameter. This value is a floating point number th… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.41 | Columnosw10bcurrentValueSecOpticalThreshold | read-write | mandatory | The value of this object provides the Current value of the Secondary Optical Input Threshold Analog parameter. This value is a floating point number that is re… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.42 | Columnosw10bstateFlagSecOpticalThreshold | read-only | mandatory | The value of this object provides the state of the Secondary Optical Input Threshold Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.43 | Columnosw10bminValueSecOpticalThreshold | read-only | mandatory | The value of this object provides the minimum value the Secondary Optical Input Threshold Analog parameter can achive. This value is a floating point number th… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.44 | Columnosw10bmaxValueSecOpticalThreshold | read-only | mandatory | The value of this object provides the maximum value the Secondary Optical Input Threshold Analog parameter can achive. This value is a floating point number th… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.45 | Columnosw10balarmStateSecOpticalThreshold | read-only | mandatory | The value of this object provides the curent alarm state of the Secondary Optical Threshold Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.46 | Columnosw10blabelModTemp | read-only | optional | The value of this object provides the label of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.47 | Columnosw10buomModTemp | read-only | optional | The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.48 | Columnosw10bmajorHighModTemp | read-only | mandatory | The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.49 | Columnosw10bmajorLowModTemp | read-only | mandatory | The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.50 | Columnosw10bminorHighModTemp | read-only | mandatory | The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.51 | Columnosw10bminorLowModTemp | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.52 | Columnosw10bcurrentValueModTemp | read-only | mandatory | The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.53 | Columnosw10bstateFlagModTemp | read-only | mandatory | The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.54 | Columnosw10bminValueModTemp | read-only | mandatory | The value of this object provides the minimum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.55 | Columnosw10bmaxValueModTemp | read-only | mandatory | The value of this object provides the maximum value the Module Temperature Analog parameter can achive. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.56 | Columnosw10balarmStateModTemp | read-only | mandatory | The value of this object provides the curent alarm state of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.57 | Columnosw10blabelFanCurrent | read-only | optional | The value of this object provides the label of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.58 | Columnosw10buomFanCurrent | read-only | optional | The value of this object provides the Unit of Measure of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.59 | Columnosw10bmajorHighFanCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.60 | Columnosw10bmajorLowFanCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.61 | Columnosw10bminorHighFanCurrent | read-only | mandatory | The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.62 | Columnosw10bminorLowFanCurrent | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.63 | Columnosw10bcurrentValueFanCurrent | read-only | mandatory | The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.64 | Columnosw10bstateFlagFanCurrent | read-only | mandatory | The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.65 | Columnosw10bminValueFanCurrent | read-only | mandatory | The value of this object provides the minimum value the Fan Current Analog parameter can achieve. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.66 | Columnosw10bmaxValueFanCurrent | read-only | mandatory | The value of this object provides the maximum value the Fan Current Analog parameter can achieve. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.15.2.1.67 | Columnosw10balarmStateFanCurrent | read-only | mandatory | The value of this object provides the current alarm state of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3 | Tablegx2Osw10bDigitalTable | not-accessible | mandatory | This table contains gx2Osw10b specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.15.3 | NodetrapOSW10BOpticalInputAlarm | This trap is issued when the Switch Control signals go out of range. trapAdditionalInfoInteger variable contains current reading of this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.15.3.2 | Rowgx2Osw10bDigitalEntry | not-accessible | mandatory | This list contains digital parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.1 | Columngx2Osw10bDigitalTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.2 | Columnosw10blabelSwitchControl | read-only | optional | The value of this object provides the label of the Switch Control Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.3 | Columnosw10benumSwitchControl | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.4 | Columnosw10bvalueSwitchControl | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.5 | Columnosw10bstateflagSwitchControl | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.6 | Columnosw10blabelSwitchMode | read-only | optional | The value of this object provides the label of the Switch Control Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.7 | Columnosw10benumSwitchMode | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.8 | Columnosw10bvalueSwitchMode | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.9 | Columnosw10bstateflagSwitchMode | read-only | mandatory | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.10 | Columnosw10blabelRevertMode | read-only | optional | The value of this object provides the label of the Revert Mode Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.11 | Columnosw10benumRevertMode | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.12 | Columnosw10bvalueRevertMode | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.13 | Columnosw10bstateflagRevertMode | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.14 | Columnosw10blabelRevertTime | read-only | optional | The value of this object provides the label of the Revert Time Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.15 | Columnosw10benumRevertTime | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.16 | Columnosw10bvalueRevertTime | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.17 | Columnosw10bstateflagRevertTime | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.18 | Columnosw10blabelWavelength | read-only | optional | The value of this object provides the label of the Wavelength Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.19 | Columnosw10benumWavelength | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.20 | Columnosw10bvalueWavelength | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.21 | Columnosw10bstateflagWavelength | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hiden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.22 | Columnosw10blabelSwitchMonitor | read-only | optional | The value of this object provides the label of the Switch State Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.23 | Columnosw10benumSwitchMonitor | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.24 | Columnosw10bvalueSwitchMonitor | read-only | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.25 | Columnosw10bstateflagSwitchMonitor | read-only | mandatory | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.26 | Columnosw10blabelOperationMode | read-only | optional | The value of this object provides the label of the Switch State Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.27 | Columnosw10benumOperationMode | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.28 | Columnosw10bvalueOperationMode | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.29 | Columnosw10bstateflagOperationMode | read-only | mandatory | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.30 | Columnosw10blabelFactoryDefault | read-only | optional | The value of this object provides the label of the Factory Default Reset Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.31 | Columnosw10benumFactoryDefault | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.32 | Columnosw10bvalueFactoryDefault | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.3.2.33 | Columnosw10bstateflagFactoryDefault | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.4 | Tablegx2Osw10bStatusTable | not-accessible | mandatory | This table contains gx2Osw10b specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.15.4 | NodetrapOSW10BFanCurrentAlarm | This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.15.4.3 | Rowgx2Osw10bStatusEntry | not-accessible | mandatory | This list contains Status parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.1 | Columngx2Osw10bStatusTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.2 | Columnosw10blabelBoot | read-only | optional | The value of this object provides the label of the Boot Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.3 | Columnosw10bvalueBoot | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.4 | Columnosw10bstateflagBoot | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.5 | Columnosw10blabelFlash | read-only | optional | The value of this object provides the label of the Flash Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.6 | Columnosw10bvalueFlash | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.7 | Columnosw10bstateflagFlash | read-only | mandatory | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.8 | Columnosw10blabelFactoryDataCRC | read-only | optional | The value of this object provides the label of the Factory Data CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.9 | Columnosw10bvalueFactoryDataCRC | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.10 | Columnosw10bstateflagFactoryDataCRC | read-only | mandatory | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.11 | Columnosw10blabelCalibrateTableStatus | read-only | optional | The value of this object provides the label of optical input calibration table status description |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.12 | Columnosw10bvalueCalibrateTableStatus | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.13 | Columnosw10bstateflagCalibrateTableStatus | read-only | mandatory | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.14 | Columnosw10blabelAlarmDataCrc | read-only | optional | The value of this object provides the label of the Alarm Data Crc parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.15 | Columnosw10bvalueAlarmDataCrc | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.16 | Columnosw10bstateflagAlarmDataCrc | read-only | mandatory | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.17 | Columnosw10blabelInputStatus | read-only | obsolete | The value of this object provides the label of the Input Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.18 | Columnosw10bvalueInputStatus | read-only | obsolete | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.19 | Columnosw10bstateflagInputStatus | read-only | obsolete | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.20 | Columnosw10blabelPriActiveStatus | read-only | optional | The value of this object provides the label of the Primary Active Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.21 | Columnosw10bvaluePriActiveStatus | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.22 | Columnosw10bstateflagPriActiveStatus | read-only | mandatory | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.23 | Columnosw10blabelHardwareErr | read-only | optional | The value of this object provides the label of the Primary Active Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.24 | Columnosw10bvalueHardwareErr | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.25 | Columnosw10bstateflagHardwareErr | read-only | mandatory | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.26 | Columnosw10blabelPriThresholdStatus | read-only | optional | The value of this object provides the label of the Primary Input Below The Threshold Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.27 | Columnosw10bvaluePriThresholdStatus | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.28 | Columnosw10bstateflagPriThresholdStatus | read-only | mandatory | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.29 | Columnosw10blabelSecThresholdStatus | read-only | optional | The value of this object provides the label of the Primary Input Below The Threshold Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.30 | Columnosw10bvalueSecThresholdStatus | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.15.4.3.31 | Columnosw10bstateflagSecThresholdStatus | read-only | mandatory | The value of this object provides the state of the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.15.5 | Tablegx2Osw10bFactoryTable | not-accessible | mandatory | This table contains gx2Osw10b specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.15.5 | NodetrapOSW10BModuleTempAlarm | This trap is issued when the Temperature goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter. | ||
| 1.3.6.1.4.1.1166.6.1.2.15.5.4 | Rowgx2Osw10bFactoryEntry | not-accessible | mandatory | This list contains Factory parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.1 | Columngx2Osw10bFactoryTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.2 | Columnosw10bbootControlByte | read-only | mandatory | The value of this object indicates which bank the firmware is currently being boot from. |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.3 | Columnosw10bbootStatusByte | read-only | mandatory | This object indicates the status of the last boot |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.4 | Columnosw10bbank1CRC | read-only | mandatory | This object provides the CRC code of bank 0. |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.5 | Columnosw10bbank2CRC | read-only | mandatory | This object provides the CRC code of bank 1. |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.6 | Columnosw10bprgEEPROMByte | read-only | mandatory | This object indicates if the EEPROM has been programmed |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.7 | Columnosw10bfactoryCRC | read-only | mandatory | This object provides the CRC code for the Factory data. |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.8 | Columnosw10bcalculateCRC | read-only | mandatory | This object indicates which of the Enums will have the CRC calculated. |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.9 | Columnosw10bhourMeter | read-only | mandatory | This object provides the hour meter reading of the module. |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.10 | Columnosw10bflashPrgCntA | read-only | mandatory | This object provides the number of times Bank 1 flash has been programmed. |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.11 | Columnosw10bflashPrgCntB | read-only | mandatory | This object provides the number of times Bank 1 flash has been programmed. |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.12 | Columnosw10bflashBankARev | read-only | mandatory | This object provides the revision of flash bank 0. |
| 1.3.6.1.4.1.1166.6.1.2.15.5.4.13 | Columnosw10bflashBankBRev | read-only | mandatory | This object provides the revision of flash bank 1. |
| 1.3.6.1.4.1.1166.6.1.2.15.6 | Tablegx2Osw10bHoldTimeTable | not-accessible | mandatory | This table contains gx2Osw10b specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.15.6 | NodetrapOSW10BFlashAlarm | This trap is issued when the detects an error during Flash memory operations. | ||
| 1.3.6.1.4.1.1166.6.1.2.15.6.5 | Rowgx2Osw10bHoldTimeEntry | not-accessible | mandatory | This list contains digital product class and the associated RF channel parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.15.6.5.1 | Columnrxgx2Osw10bHoldTimeTableIndex | read-only | mandatory | The value of this object is the index of the data object. |
| 1.3.6.1.4.1.1166.6.1.2.15.6.5.2 | Columnrxgx2Osw10bHoldTimeSpecIndex | read-only | mandatory | The value of this object identifies the index of the alarm object to be modified. |
| 1.3.6.1.4.1.1166.6.1.2.15.6.5.3 | Columnrxgx2Osw10bHoldTimeData | read-write | mandatory | The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered… |
| 1.3.6.1.4.1.1166.6.1.2.15.7 | NodetrapOSW10BBankBootAlarm | This trap is issued when the detects an error while booting from bank 0 or bank 1. | ||
| 1.3.6.1.4.1.1166.6.1.2.15.8 | NodetrapOSW10BCaliDataCRCAlarm | This trap is issued when the optical calibration table corrupted. | ||
| 1.3.6.1.4.1.1166.6.1.2.15.9 | NodetrapOSW10BFactoryDataCRCAlarm | This trap is issued when the Factory Data CRC is incorrect. | ||
| 1.3.6.1.4.1.1166.6.1.2.15.10 | NodetrapOSW10BAlarmDataCRCAlarm | This trap is issued when the Alarm Data CRC is incorrect. | ||
| 1.3.6.1.4.1.1166.6.1.2.15.11 | NodetrapOSW10BInputSwitchedAlarm | This trap is issued when the Optical input switched. This is info only alarm, unit nothing wrong | ||
| 1.3.6.1.4.1.1166.6.1.2.15.12 | NodetrapOSW10BResetFactoryDefaultAlarm | This trap is issued when the Factory Default Reset occurs. This is info only | ||
| 1.3.6.1.4.1.1166.6.1.2.15.13 | NodetrapOSW10BSecondaryInputActiveAlarm | This trap is issued when the secondary input becomes active. | ||
| 1.3.6.1.4.1.1166.6.1.2.15.14 | NodetrapOSW10BPriOpticInputAlarm | This trap is issued when primary optical input out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.15.15 | NodetrapOSW10BSecOpticInputAlarm | This trap is issued when Sec optical input out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.15.16 | NodetrapOSW10BHardwareErrorAlarm | This trap is issued when hardware error happens. |