OMNI-gx2RX1000-MIB
146 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.9.1 | Nodegx2Rx1000Descriptor | |||
| 1.3.6.1.4.1.1166.6.1.2.9.1 | NodetrapRX1000ConfigChangeInteger | This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain curre… | ||
| 1.3.6.1.4.1.1166.6.1.2.9.2 | Tablegx2Rx1000AnalogTable | not-accessible | mandatory | This table contains gx2Rx1000 specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.9.2 | NodetrapRX1000ConfigChangeDisplayString | This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may … | ||
| 1.3.6.1.4.1.1166.6.1.2.9.2.1 | Rowgx2Rx1000AnalogEntry | not-accessible | mandatory | This list contains digital product class and the associated RF channel parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.1 | Columnfprgx2Rx1000AnalogTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.2 | ColumnfprlabelOptPower | read-only | optional | The value of this object provides the label of the Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.3 | ColumnfpruomOptPower | read-only | optional | The value of this object provides the Unit of Measure of the Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.4 | ColumnfprmajorHighOptPower | read-only | mandatory | The value of this object provides the Major High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented a… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.5 | ColumnfprmajorLowOptPower | read-only | mandatory | The value of this object provides the Major Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.6 | ColumnfprminorHighOptPower | read-only | mandatory | The value of this object provides the Minor High alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented a… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.7 | ColumnfprminorLowOptPower | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Optical Power Analog parameter. This value is a floating point number that is represented as… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.8 | ColumnfprcurrentValueOptPower | read-only | mandatory | The value of this object provides the Current value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.9 | ColumnfprstateFlagOptPower | read-only | mandatory | The value of this object provides the state of the Optical Power Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.10 | ColumnfprminValueOptPower | read-only | mandatory | The value of this object provides the minimum value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.11 | ColumnfprmaxValueOptPower | read-only | mandatory | The value of this object provides the maximum value of the Optical Power Analog parameter. This value is a floating point number that is represented as an IEEE… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.12 | ColumnfpralarmStateOptPower | read-only | mandatory | The value of this object provides the curent alarm state of the Optical Power Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.13 | ColumnfprlabelModTemp | read-only | optional | The value of this object provides the label of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.14 | ColumnfpruomModTemp | read-only | optional | The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.15 | ColumnfprmajorHighModTemp | read-only | mandatory | The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.16 | ColumnfprmajorLowModTemp | read-only | mandatory | The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.17 | ColumnfprminorHighModTemp | read-only | mandatory | The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.18 | ColumnfprminorLowModTemp | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.19 | ColumnfprcurrentValueModTemp | read-only | mandatory | The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.20 | ColumnfprstateFlagModTemp | read-only | mandatory | The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.21 | ColumnfprminValueModTemp | read-only | mandatory | The value of this object provides the minimum value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.22 | ColumnfprmaxValueModTemp | read-only | mandatory | The value of this object provides the maximum value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.23 | ColumnfpralarmStateModTemp | read-only | mandatory | The value of this object provides the curent alarm state of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.24 | ColumnfprlabelSinkTemp | read-only | optional | The value of this object provides the label of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.25 | ColumnfpruomSinkTemp | read-only | optional | The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.26 | ColumnfprmajorHighSinkTemp | read-only | mandatory | The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.27 | ColumnfprmajorLowSinkTemp | read-only | mandatory | The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.28 | ColumnfprminorHighSinkTemp | read-only | mandatory | The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represen… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.29 | ColumnfprminorLowSinkTemp | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represent… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.30 | ColumnfprcurrentValueSinkTemp | read-only | mandatory | The value of this object provides the Current value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.31 | ColumnfprstateFlagSinkTemp | read-only | mandatory | The value of this object provides the state of the Module Temperature Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.32 | ColumnfprminValueSinkTemp | read-only | mandatory | The value of this object provides the minimum value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.33 | ColumnfprmaxValueSinkTemp | read-only | mandatory | The value of this object provides the maximum value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.34 | ColumnfpralarmStateSinkTemp | read-only | mandatory | The value of this object provides the curent alarm state of the Module Temperature Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.35 | ColumnfprlabelFanCurrent | read-only | optional | The value of this object provides the label of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.36 | ColumnfpruomFanCurrent | read-only | optional | The value of this object provides the Unit of Measure of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.37 | ColumnfprmajorHighFanCurrent | read-only | mandatory | The value of this object provides the Major High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.38 | ColumnfprmajorLowFanCurrent | read-only | mandatory | The value of this object provides the Major Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.39 | ColumnfprminorHighFanCurrent | read-only | mandatory | The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as … |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.40 | ColumnfprminorLowFanCurrent | read-only | mandatory | The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This value is a floating point number that is represented as a… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.41 | ColumnfprcurrentValueFanCurrent | read-only | mandatory | The value of this object provides the Current value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.42 | ColumnfprstateFlagFanCurrent | read-only | mandatory | The value of this object provides the state of the Fan Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.43 | ColumnfprminValueFanCurrent | read-only | mandatory | The value of this object provides the minimum value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.44 | ColumnfprmaxValueFanCurrent | read-only | mandatory | The value of this object provides the maximum value of the Fan Current Analog parameter. This value is a floating point number that is represented as an IEEE 3… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.45 | ColumnfpralarmStateFanCurrent | read-only | mandatory | The value of this object provides the curent alarm state of the Fan Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.46 | Columnfprlabel12Volt | read-only | optional | The value of this object provides the label of the 12v Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.47 | Columnfpruom12Volt | read-only | optional | The value of this object provides the Unit of Measure of the 12v Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.48 | ColumnfprmajorHigh12Volt | read-only | mandatory | The value of this object provides the Major High alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.49 | ColumnfprmajorLow12Volt | read-only | mandatory | The value of this object provides the Major Low alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.50 | ColumnfprminorHigh12Volt | read-only | mandatory | The value of this object provides the Minor High alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.51 | ColumnfprminorLow12Volt | read-only | mandatory | The value of this object provides the Minor Low alarm value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented … |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.52 | ColumnfprcurrentValue12Volt | read-only | mandatory | The value of this object provides the Current value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IE… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.53 | ColumnfprstateFlag12Volt | read-only | mandatory | The value of this object provides the state of the 12v Current Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.54 | ColumnfprminValue12Volt | read-only | mandatory | The value of this object provides the minimum value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IE… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.55 | ColumnfprmaxValue12Volt | read-only | mandatory | The value of this object provides the maximum value of the 12 Volt Current Analog parameter. This value is a floating point number that is represented as an IE… |
| 1.3.6.1.4.1.1166.6.1.2.9.2.1.56 | ColumnfpralarmState12Volt | read-only | mandatory | The value of this object provides the curent alarm state of the 12v Current Analog parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.3 | Tablegx2Rx1000DigitalTable | not-accessible | mandatory | This table contains gx2Rx1000 specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.9.3 | NodetrapRX1000OpticalPowerAlarm | This trap is issued when the input Optical Power parameter goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.3.2 | Rowgx2Rx1000DigitalEntry | not-accessible | mandatory | This list contains digital product class and the associated RF channel parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.1 | Columnfprgx2Rx1000DigitalTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.2 | ColumnfprlabelSlopeSetting | read-only | optional | The value of this object provides the label of the RX1000's AttnSetting Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.3 | ColumnfprenumSlopeSetting | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.4 | ColumnfprvalueSlopeSetting | read-write | mandatory | The value of this object is the current value of the parameter. It is an integer value from 0 to 6. Each increment represents 1/2 dB of slope from 0 to 3 dB. W… |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.5 | ColumnfprstateFlagSlopeSetting | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.6 | ColumnfprlabelAttnSetting | read-only | optional | The value of this object provides the label of the RX1000's AttnSetting Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.7 | ColumnfprenumAttnSetting | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.8 | ColumnfprvalueAttnSetting | read-write | mandatory | The value of this object is the current value of the parameter. It is an integer value from 0 to 40. Each increment represents 1/4 dB of attenuation from 0 to … |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.9 | ColumnfprstateFlagAttnSetting | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.10 | ColumnfprlabelWavelength | read-only | optional | The value of this object provides the label of the RX1000's Wavelength Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.11 | ColumnfprenumWavelength | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a comma. The first value … |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.12 | ColumnfprvalueWavelength | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.13 | ColumnfprstateFlagWavelength | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.14 | ColumnfprlabelFactoryDefault | read-only | optional | The value of this object provides the label of the Factory Default Reset Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.15 | ColumnfprenumFactoryDefault | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.16 | ColumnfprvalueFactoryDefault | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.17 | ColumnfprstateFlagFactoryDefault | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.18 | ColumnfprlabelSwModeThreshold | read-only | optional | The value of this object provides the label of the RX1000's Switch Mode Threshold Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.19 | ColumnfprenumSwModeThreshold | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a comma. The first value … |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.20 | ColumnfprvalueSwModeThreshold | read-write | mandatory | The value of this object reflects the setting of the threshold at which the Optical Input Failed signal is sent. It is in 0.5 dB increments ranging from -9 to … |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.21 | ColumnfprstateFlagSwModeThreshold | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.22 | ColumnfprlabelSwModeSetting | read-only | optional | The value of this object provides the label of the RX1000's Switch Mode Setting Digital parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.23 | ColumnfprenumSwModeSetting | read-only | optional | The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value… |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.24 | ColumnfprvalueSwModeSetting | read-write | mandatory | The value of this object is the current value of the parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.3.2.25 | ColumnfprstateFlagSwModeSetting | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.4 | Tablegx2Rx1000StatusTable | not-accessible | mandatory | This table contains gx2Rx1000 specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.9.4 | NodetrapRX1000ModuleTemperatureAlarm | This trap is issued when the RX1000 Module's Temperature goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.4.3 | Rowgx2Rx1000StatusEntry | not-accessible | mandatory | This list contains digital product class and the associated RF channel parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.1 | Columnfprgx2Rx1000StatusTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.2 | ColumnfprlabelBoot | read-only | optional | The value of this object provides the label of the Boot Status Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.3 | ColumnfprvalueBoot | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.4 | ColumnfprstateflagBoot | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.5 | ColumnfprlabelFlash | read-only | optional | The value of this object provides the label of the Flash Status Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.6 | ColumnfprvalueFlash | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.7 | ColumnfprstateflagFlash | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.8 | ColumnfprlabelFactoryDataCRC | read-only | optional | The value of this object provides the label of the Factory Data CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.9 | ColumnfprvalueFactoryDataCRC | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.10 | ColumnfprstateflagFactoryDataCRC | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.11 | ColumnfprlabelAlarmDataCRC | read-only | optional | The value of this object provides the label of the Alarm Data CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.12 | ColumnfprvalueAlarmDataCRC | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.13 | ColumnfprstateflagAlarmDataCRC | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.14 | ColumnfprlabelCalibrationDataCRC | read-only | optional | The value of this object provides the label of the Calibration Data CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.15 | ColumnfprvalueCalibrationDataCRC | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.16 | ColumnfprstateflagCalibrationDataCRC | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.17 | ColumnfprlabelFacCalSettingCRC | read-only | optional | The value of this object provides the label of the Factor Cal Setting CRC Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.18 | ColumnfprvalueFacCalSettingCRC | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.19 | ColumnfprstateflagFacCalSettingCRC | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.20 | ColumnfprlabelInputSig | read-only | optional | The value of this object provides the label of the Input Sig Status parameter. |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.21 | ColumnfprvalueInputSig | read-only | mandatory | The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical). |
| 1.3.6.1.4.1.1166.6.1.2.9.4.3.22 | ColumnfprstateflagInputSig | read-only | mandatory | The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable). |
| 1.3.6.1.4.1.1166.6.1.2.9.5 | Tablegx2Rx1000FactoryTable | not-accessible | mandatory | This table contains gx2Rx1000 specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.9.5 | NodetrapRX1000HeatSinkTemperatureAlarm | This trap is issued when the RX1000 Heat Sink Temperature goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.5.4 | Rowgx2Rx1000FactoryEntry | not-accessible | mandatory | This list contains digital product class and the associated RF channel parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.1 | Columnfprgx2Rx1000FactoryTableIndex | read-only | mandatory | The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element. |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.2 | ColumnfprbootControlByte | read-only | mandatory | The value of this object indicates which bank the firmware is currently being boot from. |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.3 | ColumnfprbootStatusByte | read-only | mandatory | This object indicates the status of the last boot |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.4 | Columnfprbank0CRC | read-only | mandatory | This object provides the CRC code of bank 0. |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.5 | Columnfprbank1CRC | read-only | mandatory | This object provides the CRC code of bank 1. |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.6 | ColumnfprprgEEPROMByte | read-only | mandatory | This object indicates if the EEPROM has been programmed |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.7 | ColumnfprfactoryCRC | read-only | mandatory | This object provides the CRC code for the Factory data. |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.8 | ColumnfprcalculateCRC | read-only | mandatory | This object indicates which of the Emnums will have the CRC calculated. |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.9 | ColumnfprhourMeter | read-only | mandatory | This object provides the hour meter reading of the module. |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.10 | ColumnfprflashPrgCntA | read-only | mandatory | This object provides the number of times the flash has been programmed on side A. |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.11 | ColumnfprflashPrgCntB | read-only | mandatory | This object provides the number of times the flash has been programmed on side B. |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.12 | ColumnfprfwRev0 | read-only | mandatory | This object provides the Revision of the firmware stores in bank 0. |
| 1.3.6.1.4.1.1166.6.1.2.9.5.4.13 | ColumnfprfwRev1 | read-only | mandatory | This object provides the Revision of the firmware stores in bank 1. |
| 1.3.6.1.4.1.1166.6.1.2.9.6 | Tablegx2Rx1000HoldTimeTable | not-accessible | mandatory | This table contains gx2Rx1000 specific parameters with nominal and current values. |
| 1.3.6.1.4.1.1166.6.1.2.9.6 | NodetrapRX1000FanCurrentAlarm | This trap is issued when the RX1000 Module's Fan Currrent parameter goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.6.5 | Rowgx2Rx1000HoldTimeEntry | not-accessible | mandatory | This list contains digital product class and the associated RF channel parameters and descriptions. |
| 1.3.6.1.4.1.1166.6.1.2.9.6.5.1 | Columngx2Rx1000HoldTimeTableIndex | read-only | mandatory | The value of this object is the index of the data object. |
| 1.3.6.1.4.1.1166.6.1.2.9.6.5.2 | Columngx2Rx1000HoldTimeSpecIndex | read-only | mandatory | The value of this object identifies the index of the alarm object to be modified. |
| 1.3.6.1.4.1.1166.6.1.2.9.6.5.3 | Columngx2Rx1000HoldTimeData | read-write | mandatory | The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered… |
| 1.3.6.1.4.1.1166.6.1.2.9.7 | NodetrapRX1000Plus12CurrentAlarm | This trap is issued when the RX1000 Module's positive 12 volt current parameter goes out of range. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.8 | NodetrapRX1000OpticalSwitchAlarm | This trap is issued when the RX1000 Redundancy signal indicates a low input signal. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.9 | NodetrapRX1000Boot0Alarm | This trap is issued when the RX1000 Module's Bank 0 Boot sequence has detected an error. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.10 | NodetrapRX1000Boot1Alarm | This trap is issued when the RX1000 Module's Bank 1 Boot sequence has detected an error. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.11 | NodetrapRX1000FlashAlarm | This trap is issued when the RX1000 Module's boot or flash programming sequence has detected a Flash error. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.12 | NodetrapRX1000AlarmDataCRCAlarm | This trap is issued when the RX1000 Module detects an error calculating the alarm limit CRC. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.13 | NodetrapRX1000FactoryDataCRCAlarm | This trap is issued when the RX1000 Module detects an error calculating the Factory data CRC. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.14 | NodetrapRX1000CalDataCRCAlarm | This trap is issued when the RX1000 Module detects an error calculating the Calibration data CRC. | ||
| 1.3.6.1.4.1.1166.6.1.2.9.15 | NodetrapRX1000ResetFacDefault | This trap is issued when the RX1000 resets to factory defaults | ||
| 1.3.6.1.4.1.1166.6.1.2.9.16 | NodetrapRX1000FacCalSettingCRCAlarm | This trap is issued when the RX1000 Module detects factory calibration setting CRC alarm. |