PANDATEL-BMP-MODEM-MIB
16 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.760.1.1.2.1.10.301 | Nodebmp | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1 | TablebmpModemTable | not-accessible | mandatory | This table contains information about all BM-P modems in all racks. |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1 | RowbmpTableEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.1 | ColumnmdmRack | read-only | mandatory | The index of the rack where the modem is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.2 | ColumnmdmModem | read-only | mandatory | This variable displays the slot number where the corresponding modem is installed in the rack. |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.3 | ColumnmdmPosition | read-only | mandatory | This variable displays the location of the corresponding modem: 'local' or 'remote'. The modem which is plugged into a managed rack is 'local', the counterpart… |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.5 | ColumnmdmModemName | read-only | mandatory | The verbal name of this modem. |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.6 | ColumnmdmDataEquipmentEmulation | read-only | mandatory | Interface mode of the unit: 'dte' or 'dce', 'te' or 'nt'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.20 | ColumnmdmClockMode | read-write | mandatory | The clock mode of the unit: 'master' or 'slave'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.21 | ColumnmdmDistance | read-write | mandatory | The transmission distance of the unit: 'long' or 'short'. 'Long' is valid for link data rates of up to 64 Kbps. For data rates higher than 64 Kbps this entry m… |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.22 | ColumnmdmDataRateAdaptation | read-write | mandatory | This entry enables or disables data rate adaptation, i.e. one unit operates at line speed and the other one at lower speeds (1.2, 2.4, 4.8 or 9.6 Kbps at 64 Kb… |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.24 | ColumnmdmClockSource | read-write | mandatory | The clock source of the link: 'internal', 'external', or 'async'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.25 | ColumnmdmDataRate | read-write | mandatory | The data rate at the interface in bits per seconds. If dataRateAdaptation is disabled, the data rate at the remote counterpart changes simultaneously. Otherwis… |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.60 | ColumnmdmLocalCarrierDetect1 | read-write | mandatory | The data carrier detect mode at the interface: if set to 'fo-link-and-remote-handshake' the DCD signal (resp. I for X.21, etc.) follows link status and remote … |
| 1.3.6.1.4.1.760.1.1.2.1.10.301.1.1.61 | ColumnmdmLocalCarrierDetect2 | read-write | mandatory | The data carrier detect mode 2 at the interface: if set to 'fo-link-and-remote-handshake' the DSR signal follows link status and remote RTS (resp. C for X.21, … |
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.301 | Nodebmp-modem |