PANDATEL-ETC-MODEM-MIB
20 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.760.1.1.2.1.10.901 | Nodeetc | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1 | TableetcModemTable | not-accessible | mandatory | The table of all ETC modems in this housing. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1 | RowetcTableEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.1 | ColumnmdmRack | read-only | mandatory | The index of the rack where the modem is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.2 | ColumnmdmModem | read-only | mandatory | This variable displays the slot number where the corresponding modem is installed in the rack. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.3 | ColumnmdmPosition | read-only | mandatory | This variable displays the location of the corresponding modem: 'local' or 'remote'. The modem which is plugged into a managed rack is 'local', the counterpart… |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.5 | ColumnmdmModemName | read-only | mandatory | A verbal name of this modem. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.6 | ColumnmdmDataEquipmentEmulation | read-only | mandatory | Interface mode of the unit: 'dte' or 'dce', 'te' or 'nt'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.7 | ColumnmdmModemProperty | read-write | mandatory | The speed class of the unit: 'eth100base-tx-full-duplex' or 'eth100base-tx-half-duplex'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.15 | ColumnmdmAlarm | read-only | mandatory | The status of local alarm: 'off' or 'on'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.64 | ColumnmdmRemoteAccessMode | read-write | mandatory | The possibility of remote management: 'enabled', 'disabled local' or 'disable local and remote'. Once disabled management at local and remote unit, it is not p… |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.65 | ColumnmdmForcedRemoteAccess | read-write | mandatory | Activation of remote management: 'on' or 'off'. Status 'on' enables management of remote unit. During this process the link is restricted to management data. T… |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.66 | ColumnmdmOperationMode | read-write | mandatory | The possibility of operation mode: 'normal', 'remote-fault-detection mode' or 'link-pass-through'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.71 | ColumnmdmFoPower | read-only | mandatory | The status of transmitter power: 'low' or 'high'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.74 | ColumnmdmAutoDetectModemProperty | read-write | mandatory | The status of auto detect of modem property: 'off' or 'on'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.98 | ColumnmdmInterfaceAlarmCondition | read-write | mandatory | The alarm trigger mode at interface port: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.99 | ColumnmdmLineAlarmCondition | read-write | mandatory | The alarm trigger mode at line port: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down, 'laser-fail', i.e… |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.140 | ColumnmdmStatusInterfacePort | read-write | mandatory | The status 'disable': port is not active. The status 'enable': port is active. |
| 1.3.6.1.4.1.760.1.1.2.1.10.901.1.1.141 | ColumnmdmStatusLinePort | read-write | mandatory | The status 'disable': port is not active. The status 'enable': port is active. |
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.901 | Nodeetc-modem |