PANDATEL-INAX-MODEM-MIB
74 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.760.1.1.2.1.10.701 | Nodeinax | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.701.1 | TableinaxModemTable | not-accessible | mandatory | This table contains information about all INAX units in all racks. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.1.1 | RowinaxTableEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.1 | ColumnmdmRack | read-only | mandatory | The index of the rack where the unit is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.2 | ColumnmdmModem | read-only | mandatory | This entry displays the slot number where the corresponding unit is installed in the rack. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.3 | ColumnmdmPosition | read-only | mandatory | This entry displays the location of the corresponding unit: 'local' or 'remote'. The unit which is plugged into a managed rack is 'local', the counterpart is '… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.5 | ColumnmdmModemName | read-only | mandatory | The verbal name of this unit. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.7 | ColumnmdmModemProperty | read-only | mandatory | The speed class of the unit: 'e1' or 't1'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.12 | ColumnmdmActiveLink | read-only | mandatory | This entry displays the line port that is receiving data. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.1.1.64 | ColumnmdmRemoteAccessMode | read-write | mandatory | This entry defines the time slot assigned for remote management. Remote management is realized via port 5 always. For T1 units 24 time slots are available only… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.2 | TableinaxIFPortTable | not-accessible | mandatory | This table contains information about all I/F ports of the INAX units in all racks. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.2.1 | RowinaxIFPortEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.1 | ColumniportRack | read-only | mandatory | The index of the rack where the unit is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.2 | ColumniportModem | read-only | mandatory | The index of the INAX unit the port belongs to. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.3 | ColumniportPosition | read-only | mandatory | This entry displays the location of the corresponding port: 'local' or 'remote'. The port which is plugged into a managed rack is 'local', the counterpart is '… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.4 | ColumniportPort | read-only | mandatory | The index of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.6 | ColumniportDataEmulationMode | read-only | mandatory | Interface mode of the port: 'dte', 'dce', 'te', or 'nt'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.25 | ColumniportDataRate | read-only | mandatory | The data rate at the interface port in bits per seconds. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.2.1.27 | ColumniportTimeslotSize | read-write | mandatory | This entry determines the size of the time slots: 'nx64k' or 'nx56k'. 'nx56k' is valid for T1 units only. The remote unit's configuration changes simultaneousl… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3 | TableinaxLinePortTable | not-accessible | mandatory | This table contains information about all line ports of the INAX units in all racks. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1 | RowinaxLinePortEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.1 | ColumnlportRack | read-only | mandatory | The index of the rack where the unit is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.2 | ColumnlportModem | read-only | mandatory | The index of the INAX unit the port belongs to. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.3 | ColumnlportPosition | read-only | mandatory | This entry displays the location of the corresponding port: 'local' or 'remote'. The port which is plugged into a managed rack is 'local', the counterpart is '… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.4 | ColumnlportPort | read-only | mandatory | The index of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.6 | ColumnlportDataEmulationMode | read-only | mandatory | Interface mode of the port: 'te' or 'nt'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.24 | ColumnlportClockSource | read-write | mandatory | The clock source: 'internal' or 'remote'. Port 4 can only be set to 'internal'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.25 | ColumnlportDataRate | read-only | mandatory | The data rate at the line port in bits per seconds. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.41 | ColumnlportCRC4Generation | read-write | mandatory | This entry enables or disables the generation of a CRC4 check sum. The remote unit's configuration changes simultaneously. Valid for E1 units only. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.50 | ColumnlportFramingMode | read-write | mandatory | The T1 framing mode: 'd4' or 'esf'. The remote unit's configuration changes simultaneously. Valid for T1 units only. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.51 | ColumnlportCodingMode | read-write | mandatory | The T1 coding mode at port 4: 'ami' or 'b8zs'. The remote unit's configuration changes simultaneously. Valid for T1 units only. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.68 | ColumnlportLineBuiltOut | read-write | mandatory | The G.703 transmission mode of the unit. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.69 | ColumnlportPortMode | read-write | mandatory | The operation mode at port 4: 'interface-mode', 'backup-mode', or 'link-mode'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.100 | ColumnlportCRC6Test | read-write | mandatory | This entry enables the execution of a CRC6 test. Write requests with values other than 'start' or 'stop' will be rejected. Valid for T1 units only. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.101 | ColumnlportCRC6Status | read-only | mandatory | This entry indicates the status of the CRC6 test. Valid for T1 units only. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.3.1.102 | ColumnlportCRC6Error | read-only | mandatory | This entry indicates the number of errors detected during the last 60 seconds. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4 | TableinaxTimeslotTable | not-accessible | mandatory | This table contains information about all line ports of the INAX units in all racks. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1 | RowinaxTimeslotEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.1 | ColumntsRack | read-only | mandatory | The index of the rack where the unit is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.2 | ColumntsModem | read-only | mandatory | The index of the INAX unit the port belongs to. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.3 | ColumntsPosition | read-only | mandatory | This entry displays the location of the corresponding port: 'local' or 'remote'. The port which is plugged into a managed rack is 'local', the counterpart is '… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.4 | ColumntsPort | read-only | mandatory | The index of the port. |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.301 | ColumntsTimeslot1 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 1. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the tim… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.302 | ColumntsTimeslot2 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 2. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the tim… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.303 | ColumntsTimeslot3 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 3. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the tim… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.304 | ColumntsTimeslot4 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 4. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the tim… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.305 | ColumntsTimeslot5 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 5. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the tim… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.306 | ColumntsTimeslot6 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 6. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the tim… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.307 | ColumntsTimeslot7 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 7. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the tim… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.308 | ColumntsTimeslot8 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 8. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the tim… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.309 | ColumntsTimeslot9 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 9. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the tim… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.310 | ColumntsTimeslot10 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 10. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.311 | ColumntsTimeslot11 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 11. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.312 | ColumntsTimeslot12 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 12. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.313 | ColumntsTimeslot13 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 13. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.314 | ColumntsTimeslot14 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 14. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.315 | ColumntsTimeslot15 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 15. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.316 | ColumntsTimeslot16 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 16. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.317 | ColumntsTimeslot17 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 17. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.318 | ColumntsTimeslot18 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 18. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.319 | ColumntsTimeslot19 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 19. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.320 | ColumntsTimeslot20 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 20. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.321 | ColumntsTimeslot21 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 21. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.322 | ColumntsTimeslot22 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 22. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.323 | ColumntsTimeslot23 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 23. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.324 | ColumntsTimeslot24 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 24. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.325 | ColumntsTimeslot25 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 25. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.326 | ColumntsTimeslot26 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 26. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.327 | ColumntsTimeslot27 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 27. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.328 | ColumntsTimeslot28 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 28. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.329 | ColumntsTimeslot29 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 29. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.330 | ColumntsTimeslot30 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 30. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.701.4.1.331 | ColumntsTimeslot31 | read-write | mandatory | This entry defines the port number used for the transmission of time slot 31. 'port-4' is available only if IportPortmode is set to 'interface-mode'. If the ti… |
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.701 | Nodeinax-modem |