PW-MPLS-DRAFT06-MIB
47 objects
This MIB module complements the PW MIB module for PW operation over MPLS. Copyright (C) The Internet Society (date). This version of this MIB module is part of RFC yyyy; see the RFC itself for full legal notices.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10 | IdentitypwVcMplsMIB | This MIB module complements the PW MIB module for PW operation over MPLS. Copyright (C) The Internet Society (date). This version of this MIB module is part of… | ||
| 1.3.6.1.2.1.10.1 | NodepwVcMplsObjects | |||
| 1.3.6.1.2.1.10.1.1 | TablepwVcMplsTable | not-accessible | current | This table controls MPLS specific parameters when the PW is going to be carried over MPLS PSN. |
| 1.3.6.1.2.1.10.1.1.1 | RowpwVcMplsEntry | not-accessible | current | A row in this table represents parameters specific to MPLS PSN for a pseudo wire (PW). The row is created automatically by the local agent if the pwVcPsnType i… |
| 1.3.6.1.2.1.10.1.1.1.1 | ColumnpwVcMplsMplsType | read-write | current | Set by the operator to indicate the outer tunnel types, if exists. mplsTe(0) is used if the outer tunnel was set-up by MPLS-TE, and mplsNonTe(1) is used the ou… |
| 1.3.6.1.2.1.10.1.1.1.2 | ColumnpwVcMplsExpBitsMode | read-write | current | Set by the operator to indicate the way the PW shim label EXP bits are to be determined. The value of outerTunnel(1) is used where there is an outer tunnel - p… |
| 1.3.6.1.2.1.10.1.1.1.3 | ColumnpwVcMplsExpBits | read-write | current | Set by the operator to indicate the MPLS EXP bits to be used on the PW shim label if pwVcMplsExpBitsMode is specifiedValue(2), zero otherwise. |
| 1.3.6.1.2.1.10.1.1.1.4 | ColumnpwVcMplsTtl | read-write | current | Set by the operator to indicate the PW TTL value to be used on the PW shim label. |
| 1.3.6.1.2.1.10.1.1.1.5 | ColumnpwVcMplsLocalLdpID | read-write | current | The local LDP identifier of the LDP entity creating this PW in the local node. As the PW labels are always set from the per platform label space, the last two … |
| 1.3.6.1.2.1.10.1.1.1.6 | ColumnpwVcMplsLocalLdpEntityID | read-write | current | The local node LDP Entity ID of the LDP entity creating this PW. Should return the value of all zeros if not used. |
| 1.3.6.1.2.1.10.1.1.1.7 | ColumnpwVcMplsPeerLdpID | read-only | current | The peer LDP identifier as identified from the LDP session. Should return the value of zero if not applicable or not known yet. |
| 1.3.6.1.2.1.10.1.1.1.8 | ColumnpwVcMplsStorageType | read-write | current | This variable indicates the storage type for this row. |
| 1.3.6.1.2.1.10.1.2 | TablepwVcMplsOutboundTable | not-accessible | current | This table reports and configure the current outbound MPLS tunnels (i.e. toward the PSN) or the physical interface in case of PW label only that carry the PW t… |
| 1.3.6.1.2.1.10.1.2.1 | RowpwVcMplsOutboundEntry | not-accessible | current | A row in this table configured the outer tunnel used for carrying the PW traffic toward the PSN. In the case of PW label only, it configures the interface that… |
| 1.3.6.1.2.1.10.1.2.1.1 | ColumnpwVcMplsOutboundLsrXcIndex | read-write | current | This object is applicable if pwVcMplsMplsType mplsNonTe(1) bit is set, and MUST return a value of zero otherwise. If the outer tunnel is signaled, the object i… |
| 1.3.6.1.2.1.10.1.2.1.2 | ColumnpwVcMplsOutboundTunnelIndex | read-write | current | This object is applicable if pwVcMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It is Part of set of indexes for outbound tunnel… |
| 1.3.6.1.2.1.10.1.2.1.3 | ColumnpwVcMplsOutboundTunnelInstance | read-only | current | This object is applicable if pwVcMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It indicates the actual tunnel instance that is … |
| 1.3.6.1.2.1.10.1.2.1.4 | ColumnpwVcMplsOutboundTunnelLclLSR | read-write | current | This object is applicable if pwVcMplsMplsType mplsTe(0) bit is set, and MUST return a value of all zeros otherwise. It is part of set of indexes for outbound t… |
| 1.3.6.1.2.1.10.1.2.1.5 | ColumnpwVcMplsOutboundTunnelPeerLSR | read-write | current | This object is applicable if pwVcMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It is part of set of indexes for outbound tunnel… |
| 1.3.6.1.2.1.10.1.2.1.6 | ColumnpwVcMplsOutboundIfIndex | read-write | current | This object is applicable if pwVcMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. The operator configure the ifIndex of the outbou… |
| 1.3.6.1.2.1.10.1.2.1.7 | ColumnpwVcMplsOutboundTunnelTypeInUse | read-only | current | This object indicates the current tunnel that is carrying the PW traffic. The value of notYetKnown(1) should be used if the agent is currently unable to determ… |
| 1.3.6.1.2.1.10.1.3 | TablepwVcMplsInboundTable | not-accessible | current | This table indicates the PW LDP XC entry in the MPLS-LSR-STD-MIB for signaled PWs. |
| 1.3.6.1.2.1.10.1.3.1 | RowpwVcMplsInboundEntry | not-accessible | current | A row in this table is created by the agent for each signaled PW, and shows the XC index related to the PW signaling in the inbound direction in the MPLS-LSR-S… |
| 1.3.6.1.2.1.10.1.3.1.1 | ColumnpwVcMplsInboundXcIndex | read-only | current | The XC index representing this PW in the inbound direction. Should return the value of zero if the information is not yet known. |
| 1.3.6.1.2.1.10.1.4 | TablepwVcMplsNonTeMappingTable | not-accessible | current | This table indicates outbound Tunnel to a PW in non-TE applications, maps the PW to it's (inbound) XC entry, and indicates the PW to physical interface mapping… |
| 1.3.6.1.2.1.10.1.4.1 | RowpwVcMplsNonTeMappingEntry | not-accessible | current | A row in this table displays the association between the PW and Pseudo Wire (PW) Over MPLS June 2004 Management Information Base - it's non-TE MPLS outbound ou… |
| 1.3.6.1.2.1.10.1.4.1.1 | ColumnpwVcMplsNonTeMappingDirection | not-accessible | current | Index for the conceptual XC row identifying Tunnel to PW mappings, indicating the direction of packet flow the entry is related too. psnBound(1) indicates that… |
| 1.3.6.1.2.1.10.1.4.1.2 | ColumnpwVcMplsNonTeMappingXcIndex | not-accessible | current | See the description clause of pwVcMplsNonTeMappingEntry for the usage guidelines of this object. |
| 1.3.6.1.2.1.10.1.4.1.3 | ColumnpwVcMplsNonTeMappingIfIndex | not-accessible | current | See the description clause of pwVcMplsNonTeMappingEntry for the usage guidelines of this object. |
| 1.3.6.1.2.1.10.1.4.1.4 | ColumnpwVcMplsNonTeMappingVcIndex | read-only | current | The value that represent the PW in the pwVcTable. |
| 1.3.6.1.2.1.10.1.5 | TablepwVcMplsTeMappingTable | not-accessible | current | This table enable the retrieval of a PW association to the outbound MPLS tunnel for MPLS-TE applications. |
| 1.3.6.1.2.1.10.1.5.1 | RowpwVcMplsTeMappingEntry | not-accessible | current | A row in this table represents the association between a PW and it's MPLS-TE outer (head-end) Tunnel. An application can use this table to quickly retrieve the… |
| 1.3.6.1.2.1.10.1.5.1.1 | ColumnpwVcMplsTeMappingTunnelIndex | not-accessible | current | Primary index for the conceptual row identifying the MPLS-TE tunnel that is carrying the PW traffic. |
| 1.3.6.1.2.1.10.1.5.1.2 | ColumnpwVcMplsTeMappingTunnelInstance | not-accessible | current | This object identify the MPLS-TE LSP that is carrying the PW traffic. Should return the value of zero if the information of the specific LSP is not yet known. … |
| 1.3.6.1.2.1.10.1.5.1.3 | ColumnpwVcMplsTeMappingTunnelPeerLsrID | not-accessible | current | Identifies the Peer LSR when the outer tunnel is MPLS-TE based. |
| 1.3.6.1.2.1.10.1.5.1.4 | ColumnpwVcMplsTeMappingTunnelLocalLsrID | not-accessible | current | Identifies the local LSR. |
| 1.3.6.1.2.1.10.1.5.1.5 | ColumnpwVcMplsTeMappingVcIndex | read-only | current | The value that represent the PW in the pwVcTable. |
| 1.3.6.1.2.1.10.2 | NodepwVcMplsConformance | |||
| 1.3.6.1.2.1.10.2.1 | NodepwVcMplsGroups | |||
| 1.3.6.1.2.1.10.2.1.1 | GrouppwVcMplsGroup | current | Collection of objects needed for PW over MPLS PSN configuration. | |
| 1.3.6.1.2.1.10.2.1.2 | GrouppwVcMplsOutboundMainGroup | current | Collection of objects needed for outbound association of PW and MPLS tunnel. | |
| 1.3.6.1.2.1.10.2.1.3 | GrouppwVcMplsOutboundTeGroup | current | Collection of objects needed for outbound association of PW and MPLS TE tunnel. | |
| 1.3.6.1.2.1.10.2.1.4 | GrouppwVcMplsInboundGroup | current | Collection of objects needed for inbound PW presentation. This group MUST be supported if PW signaling through LDP is used. | |
| 1.3.6.1.2.1.10.2.1.5 | GrouppwVcMplsMappingGroup | current | Collection of objects needed for mapping association of PW and MPLS tunnel. | |
| 1.3.6.1.2.1.10.2.2 | NodepwVcMplsCompliances | |||
| 1.3.6.1.2.1.10.2.2.1 | CompliancepwMplsModuleFullCompliance | read-only | current | The compliance statement for agents that provide full support for PW-MPLS MIB Module. Such devices can Pseudo Wire (PW) Over MPLS June 2004 Management Informat… |
| 1.3.6.1.2.1.10.2.2.2 | CompliancepwMplsModuleReadOnlyCompliance | read-only | current | The compliance statement for agents that provide read only support for PW-MPLS MIB Module. Such devices can then be monitored but cannot be configured using th… |