QB-ETHERNET-MIB
18 objects
This module defines proprietary objects that extend those in IETF's the Ethernet-Like Interface MIB.
Imported Objects
| BRIDGE-MIB | MacAddress |
| EtherLike-MIB | dot3StatsEntry |
| QB-DWS-MIB | QbAtmAal5EncapsType |
| QUANTUMBRIDGE-REG | qbMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4323.2.5 | IdentityqbEthernetMIB | This module defines proprietary objects that extend those in IETF's the Ethernet-Like Interface MIB. | ||
| 1.3.6.1.4.1.4323.2.5.1 | NodeqbDot3Objects | |||
| 1.3.6.1.4.1.4323.2.5.1.2 | TableqbDot3ConfigTable | not-accessible | current | Quantum Bridge proprietary configuration parameters for ethernet-like interfaces. |
| 1.3.6.1.4.1.4323.2.5.1.2.1 | RowqbDot3ConfigEntry | not-accessible | current | Quantum Bridge proprietary configuration parameters for single ethernet-like interface. |
| 1.3.6.1.4.1.4323.2.5.1.2.1.1 | ColumnqbDot3ConfigSpeed | read-write | deprecated | The configured speed of the interface. This may be set by the administrator or may be the result of auto-negotiation. |
| 1.3.6.1.4.1.4323.2.5.1.2.1.2 | ColumnqbDot3ConfigDuplexMode | read-write | deprecated | The configured mode of the interface. |
| 1.3.6.1.4.1.4323.2.5.1.2.1.3 | ColumnqbDot3ConfigEncapsType | read-write | current | The type of data encapsulation used over the AAL5 SSCS layer. The definitions reference RFC 1483 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum… |
| 1.3.6.1.4.1.4323.2.5.1.2.1.4 | ColumnqbDot3ConfigRouterAddress | read-write | current | The MAC address of the router that connects to the IOT Ethnernet port. Note that this object is relevant for IOT ports only |
| 1.3.6.1.4.1.4323.2.5.1.2.1.5 | ColumnqbDot3ConfigLoopback | read-write | current | The loopback configuration of this interface. If used in a set it will cause the agent to place the interface in the desired loopback mode. When read, it will … |
| 1.3.6.1.4.1.4323.2.5.1.2.1.6 | ColumnqbDot3ConfigEnetAdminMode | read-write | current | This object identifies the default administrative baseband MAU type, to be used in conjunction with the operational MAU type denoted by ifMauType. For a detail… |
| 1.3.6.1.4.1.4323.2.5.1.2.1.7 | ColumnqbDot3ConfigEnetType | read-only | current | This object identifies the MAU type. For a detailed description see ifMauType in RFC2668. |
| 1.3.6.1.4.1.4323.2.5.1.2.1.8 | ColumnqbDot3ConfigEnetNegMode | read-write | current | This object is used to enable and disable auto-negotiation on a given port. |
| 1.3.6.1.4.1.4323.2.5.2 | NodeqbDot3Conformance | |||
| 1.3.6.1.4.1.4323.2.5.2.1 | NodeqbDot3Compliances | |||
| 1.3.6.1.4.1.4323.2.5.2.1.1 | ComplianceqbDot3Compliance | current | The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. | |
| 1.3.6.1.4.1.4323.2.5.2.2 | NodeqbDot3Groups | |||
| 1.3.6.1.4.1.4323.2.5.2.2.1 | GroupqbDot3Group | current | The set of all accessible objects in this MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| QbDot3LoopbackType | INTEGER { qbDot3LoopbackNoLoop(1), qbDot3LoopbackLineLoop(2), qbDot3LoopbackPayloadLoop(3) } | current | The type of loopback available on Quantum Bridge 802.3 (ethernet) interfaces. |