MIB Viewer

QB-VT15-MIB

60 objects
This module defines additional objects for the provisioning of VT1.5/VC12 links in Quantum Bridge devices.
OIDNameAccessStatusDescription
1.3.6.1.4.1.4323.2.9IdentityqbVTVCMIBThis module defines additional objects for the provisioning of VT1.5/VC12 links in Quantum Bridge devices.
1.3.6.1.4.1.4323.2.9.1NodeqbVTVCTables
1.3.6.1.4.1.4323.2.9.1.1TableqbVTVCConnTablenot-accessiblecurrentThe Quantum Bridge VT connection table contains a list of VT1.5 connections that are provisioned at OAS SONET(STS-3) and SDH(STM-1) interfaces between IOT(DS1/…
1.3.6.1.4.1.4323.2.9.1.1.1RowqbVTVCConnEntrynot-accessiblecurrentAn entry in the Quantum Bridge qbVTVCConnTable table.
1.3.6.1.4.1.4323.2.9.1.1.1.1ColumnqbVTVCIfIndexnot-accessiblecurrentThe STS-3/SDH-1 signal interface.
1.3.6.1.4.1.4323.2.9.1.1.1.2ColumnqbVTVCConnIdnot-accessiblecurrentThe identifier of the specified VT (virtual tributary) or VC signal. The VT identifier is determined by using the following formula: (sts-1) * 28 + (vtgrp-1) *…
1.3.6.1.4.1.4323.2.9.1.1.1.3ColumnqbVTVCConnIotAtmIfIndexread-createcurrentAn IOT interface index of the atm layer interface or DS1/E1 interface of the connection between an ATM/IOT and a VT1.5/VC12 or VT1.5/VC12 and VT1.5/VC12. The c…
1.3.6.1.4.1.4323.2.9.1.1.1.4ColumnqbVTVCConnNameread-createcurrentThe textual name of the VT1.5/VC12 connection as specified by a user. It provides a non-volatile handle for this PVC.The supplied name in the qbVTVCConnName is…
1.3.6.1.4.1.4323.2.9.1.1.1.5ColumnqbVTVCConnAdminStatusread-createcurrentThe desired administrative status of the connection The up and down states indicate that the traffic flow is enabled or disabled respectively across the specif…
1.3.6.1.4.1.4323.2.9.1.1.1.6ColumnqbVTVCConnOperStatusread-onlycurrentThe current operational status of the connection.
1.3.6.1.4.1.4323.2.9.1.1.1.7ColumnqbVTVCConnLastChangeread-onlycurrentThe value of sysUpTime at the time this connection entered its current operational state.
1.3.6.1.4.1.4323.2.9.1.1.1.8ColumnqbVTVCConnAtmVpiread-createcurrentThe value of this object is equal to the VPI used by the ATM VCL mapped through this connection to a VT. The value is irrelevant for a non-ATM connection. (i.e…
1.3.6.1.4.1.4323.2.9.1.1.1.9ColumnqbVTVCConnAtmVciread-createcurrentThe value of this object is equal to the VCI used by the ATM VCL mapped through this connection to a VT. The value is irrelevant if a non-ATM connection. (i.e.…
1.3.6.1.4.1.4323.2.9.1.1.1.10ColumnqbVTVCConnKindread-createcurrentThe VT connection type. Two types of connection can be provisioned on the VT/sonet port (IOT-VT and VT-ATM)
1.3.6.1.4.1.4323.2.9.1.1.1.11ColumnqbVTVCCrossConnIdread-onlycurrentThis object is instantiated only for a VT/VC which is cross-connected to another VT/VC. Two entries that have the same value belong to a single entry of qbVTVC…
1.3.6.1.4.1.4323.2.9.1.1.1.12ColumnqbVTVCConnRowStatusread-createcurrentThe status column for this IOT ENET interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) This object may…
1.3.6.1.4.1.4323.2.9.1.1.1.13ColumnqbVTVCConnLoopbackread-createcurrentActivate a connection loopback for a PVC that has an endpoint on this VT. This object, when read, returns one of the following results: enable(1): Loopback is …
1.3.6.1.4.1.4323.2.9.1.1.1.14ColumnqbVTVCConnLoopbackEndptread-createcurrentDefine an endpoint on which loopback is activated or disabled. The object works in conjunction with the qbVTVCConnLoopback.
1.3.6.1.4.1.4323.2.9.1.2TableqbVTVCCrossConnTablenot-accessiblecurrentThe Quantum Bridge VT cross-connection (VT to VT) table contains all point-to-point cross-connections between various VTs that are provisoned at OAS STS-3 Sone…
1.3.6.1.4.1.4323.2.9.1.2.1RowqbVTVCCrossConnEntrynot-accessiblecurrentAn entry in the Quantum Bridge QbVTVCCrossConnTable.
1.3.6.1.4.1.4323.2.9.1.2.1.1ColumnqbVTVCCrossConnIfIndexEndpt1not-accessiblecurrentThe STS-3/SDH-1 Sonet low interface index of the specified cross-connection.
1.3.6.1.4.1.4323.2.9.1.2.1.2ColumnqbVTVCCrossConnVTIdEndpt1not-accessiblecurrentThe low VT/VC identifier of the specified VT/VC group of the first cross-connect endpoint.
1.3.6.1.4.1.4323.2.9.1.2.1.3ColumnqbVTVCCrossConnIfIndexEndpt2not-accessiblecurrentThe high STS-3 Sonet interface of the specified cross-connection of the second cross-connect endpoint.
1.3.6.1.4.1.4323.2.9.1.2.1.4ColumnqbVTVCCrossConnVTIdEndpt2not-accessiblecurrentThe high VT/VC identifier of the specified VT group of the second cross-connect endpoint.
1.3.6.1.4.1.4323.2.9.1.2.1.5ColumnqbVTVCCrossConnIndexread-createcurrentA unique value to identify this VT to VT cross-connect. For each qbVTVCConnEntry associated with this cross-connect, the agent reports this cross-connect index…
1.3.6.1.4.1.4323.2.9.1.2.1.6ColumnqbVTVCCrossConnNameread-createcurrentThe textual name of the VT1.5 cross-connection as specified by a user. It provides a non-volatile handle for this cross-connection. The supplied name in the qb…
1.3.6.1.4.1.4323.2.9.1.2.1.7ColumnqbVTVCCrossConnAdminStatusread-createcurrentThe desired administrative status of the specified cross-connection. The up and down states indicate that the traffic flow is enabled or disabled across this c…
1.3.6.1.4.1.4323.2.9.1.2.1.8ColumnqbVTVCCrossConnOperStatusread-onlycurrentThe current operational status of the connection.
1.3.6.1.4.1.4323.2.9.1.2.1.9ColumnqbVTVCCrossConnKindread-createcurrentThe VT connection type. Two types of connection can be provisioned on the VT-VT and VC-VC.
1.3.6.1.4.1.4323.2.9.1.2.1.10ColumnqbVTVCCrossConnRowStatusread-createcurrentThe status column for this IOT ENET interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) This object may…
1.3.6.1.4.1.4323.2.9.1.3TableqbVTConfTablenot-accessiblecurrentThe Quantum Bridge VT configuration table contains configuration parameters of tributaries at OAS VT155 interfaces. The STS-3 interfaces of D155VT cards that a…
1.3.6.1.4.1.4323.2.9.1.3.1RowqbVTConfEntrynot-accessiblecurrentAn entry in the Quantum Bridge qbVTConfEntry. Every entry containes settings of the tributary
1.3.6.1.4.1.4323.2.9.1.3.1.1ColumnqbVTConfIfIndexnot-accessiblecurrentThe STS-3/SDH-1 Sonet interface of the specified tributary.
1.3.6.1.4.1.4323.2.9.1.3.1.2ColumnqbVTConfVTIdnot-accessiblecurrentThe identifier of the specified tributary.
1.3.6.1.4.1.4323.2.9.1.3.1.3ColumnqbVTConfClockModeread-writecurrentThe object defines whether VT155 service clocking mode used for AAL1 recovery. Applies only to D155VT interfaces that are configured for SONET format.
1.3.6.1.4.1.4323.2.9.1.3.1.4ColumnqbVTConfActionread-writecurrentIndicates whether the clock mode is set for a single tributary or group of tributaries. When set to 'singleVTAction(1)' a single selected tributary is set to a…
1.3.6.1.4.1.4323.2.9.1.4TableqbVtVcStatsTablenot-accessiblecurrentThis table contains the stats for each VT/VC with a connection established. One row in this table should exist for each VT/VC connection.
1.3.6.1.4.1.4323.2.9.1.4.1RowqbVtVcStatsEntrynot-accessiblecurrentAn entry in the Quantum Bridge qbVtVcStatsTable table.
1.3.6.1.4.1.4323.2.9.1.4.1.1ColumnqbVtVcStatsIfIndexnot-accessiblecurrentThe STS-3/SDH-1 signal interface.
1.3.6.1.4.1.4323.2.9.1.4.1.2ColumnqbVtVcStatsConnIdnot-accessiblecurrentThe identifier of the specified VT (virtual tributary) or VC signal. The VT identifier is determined by using the following formula: (sts-1) * 28 + (vtgrp-1) *…
1.3.6.1.4.1.4323.2.9.1.4.1.3ColumnqbVtVcStatsRxCellsread-onlycurrentThe number of received cells.
1.3.6.1.4.1.4323.2.9.1.4.1.4ColumnqbVtVcStatsTxCellsread-onlycurrentThe number of transmitted cells.
1.3.6.1.4.1.4323.2.9.1.4.1.5ColumnqbVtVcStatsRxDroppedCellsread-onlycurrentThe number of received cells that were dropped.
1.3.6.1.4.1.4323.2.9.1.4.1.6ColumnqbVtVcStatsTxConditionalCellsread-onlycurrentThe number of transmitted conditional cells.
1.3.6.1.4.1.4323.2.9.1.4.1.7ColumnqbVtVcStatsTxSuppressedCellsread-onlycurrentThe number of transmitted supressed cells.
1.3.6.1.4.1.4323.2.9.2NodeqbVTVCNotifications
1.3.6.1.4.1.4323.2.9.2.0NodeqbVTVCNotificationPrefix
1.3.6.1.4.1.4323.2.9.2.0.1NotificationqbVTVCConnOperStatusChangecurrentA notification indicates that a VT15 connection has chaged the operations status. The notification is originated for every connection which is listed in the qb…
1.3.6.1.4.1.4323.2.9.2.0.2NotificationqbVTVCCrossConnOperStatusChangecurrentA notification indicates that a VT15 cross-connection has chaged the operations status. The notification is originated for every connection which is listed in …
1.3.6.1.4.1.4323.2.9.3NodeqbVTVCConformance
1.3.6.1.4.1.4323.2.9.3.1NodeqbVTVCCompliances
1.3.6.1.4.1.4323.2.9.3.1.1ComplianceqbVTVCCompliancecurrentThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB.
1.3.6.1.4.1.4323.2.9.3.2NodeqbVTVCGroups
1.3.6.1.4.1.4323.2.9.3.2.1GroupqbVTVCConnInfocurrentThe set of all accessible objects in this MIB.
1.3.6.1.4.1.4323.2.9.3.2.2GroupqbVTVCCrossConnInfocurrentThe set of all accessible objects in this MIB.
Type Definitions
NameSyntaxStatusDescription
QbVC12IdUnsigned32 (1..63)currentThe VC Identifier number.
QbVT15Sts1Unsigned32 (1..3)currentThe STS-1 number.
QbVT15VTGroupUnsigned32 (1..7)currentThe VT1.5 group number.
QbVT15VTGroupIdUnsigned32 (1..4)currentThe VT1.5 group number.
QbVT15VTIdUnsigned32 (1..84)currentThe VT Identifier number. The qbVT15VTId is determined by using the following formula: (sts-1) * 28 + (vtgrp-1) * 4 + vtnum. sts-sonet path, vtgrp - sonet path group, vt - VT number.