RFC1406Ext-MIB
20 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | -- Proprietary Imports cxDSX1Ext |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.53.1 | Scalardsx1ExtMibLevel | read-only | mandatory | Used to determine current MIB module release supported by the agent. Object is in decimal. |
| 1.3.6.1.4.1.495.2.1.6.53.10 | Tabledsx1ExtCfgTable | not-accessible | mandatory | The T1/E1 extensions configuration table. |
| 1.3.6.1.4.1.495.2.1.6.53.10.1 | Rowdsx1ExtCfgEntry | not-accessible | mandatory | An entry in the T1/E1 extensions configuration table. |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.1 | Columndsx1ExtCfgLinkIndex | read-only | mandatory | Identifies the physical port with the T1/E1 (dsx1Ext) interface. Range of Values: 1 - 2 Default Value: None Configuration Changed: administrative |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.10 | Columndsx1ExtCfgPortStatus | read-write | mandatory | Indicates whether this T1/E1 (dsx1Ext) port is enabled or disabled. Options: disabled (1): The port is physically present but will be disabled (deactivated) af… |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.11 | Columndsx1ExtCfgTraps | read-write | mandatory | Determines whether the software will produce a T1/E1 (dsx1...) trap. Options: disabled (1): The trap will not be produced. enabled (2): The trap will be genera… |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.12 | Columndsx1ExtCfgLineBuildOut | read-write | mandatory | Specifies the attenuation or Line Build Out to be used on the transmitter side of the line. Options: For T1 1: 0 to 133 feet / 0 dB 2: 133 to 266 feet 3: 266 t… |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.50 | Columndsx1ExtCfgCardType | read-only | mandatory | Indicates the type of card connected to this CPU board. Options: dsx1ExtNoCard (1): Indicates that there is not a T1 or E1 card connected to the line interface… |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.51 | Columndsx1ExtCfgLossTxClock | read-only | mandatory | Indicates the total time at which the transmit clock was lost on this line interface. If no such event has occurred since system startup, then the value will b… |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.52 | Columndsx1ExtCfgLossSync | read-only | mandatory | Indicates the total time at which the synchronization was lost on this line interface. If no such event has occurred since system startup, then the value will … |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.53 | Columndsx1ExtCfgLossCarrier | read-only | mandatory | Indicates the total time at which the carrier was lost on this line interface. If no such event has occurred since system startup, then the value will be zero. |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.54 | Columndsx1ExtCfgT18ZeroDetect | read-only | mandatory | Indicates the total time that 8 consecutive zeros were received on this line interface. If no such event has occurred since system startup, then the value will… |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.55 | Columndsx1ExtCfgT116ZeroDetect | read-only | mandatory | Indicates the total time that 16 consecutive zeros were received on this line interface. If no such event has occurred since system startup, then the value wil… |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.56 | Columndsx1ExtCfgT1RxB8ZSCode | read-only | mandatory | Indicates the total time that a B8ZS code word was detected during reception on this line interface. If no such event has occurred since system startup, then t… |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.57 | Columndsx1ExtCfgT1RxBlueAlarm | read-only | mandatory | Indicates the total time that a 'blue alarm' was received on this line interface. A blue alarm is an unframed signal comprised of all ones (1s). If no such eve… |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.58 | Columndsx1ExtCfgT1RxYellowAlarm | read-only | mandatory | Indicates the total time that a 'yellow alarm' was received on this line interface. A yellow alarm occurs when bit 2 of 256 consecutive channels is set to zero… |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.59 | Columndsx1ExtCfgIoRegTest | read-only | mandatory | Indicates the test results for the T1/E1 I/O card registers. |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.60 | Columndsx1ExtCfgSctRegTest | read-only | mandatory | Indicates the test results for the T1 transceiver registers, specifically the 12 Transmit Signaling Registers. |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.61 | Columndsx1ExtCfgSctLatchRegTest | read-only | mandatory | Indicates the test results for the T1 transceiver latch register, specifically the second Status Register. |
| 1.3.6.1.4.1.495.2.1.6.53.10.1.81 | Columndsx1ExtCfgReinit | write-only | mandatory | When this object is set to any value, it reinitializes the corresponding port. |