S5-TOKENRING-COMMON-MIB
135 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.6.7.1.1 | Tables5TrPortTable | not-accessible | mandatory | A table containing information about each port on a board. The number of entries is determined by the number of manageable ports. Those boards that do not have… |
| 1.3.6.1.4.1.45.1.6.7.1.1.1 | Rows5TrPortEntry | not-accessible | mandatory | A row in Token Ring port table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.1 | Columns5TrPortBrdIndx | read-only | mandatory | The index of the board. This corresponds to the index of the slot containing the board. |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.2 | Columns5TrPortIndx | read-only | mandatory | The index of the port on the board. Its value ranges between 1 and the number of manageable ports on the board. |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.3 | Columns5TrPortWrapStatus | read-write | mandatory | The wrap status of the port. The following values can be written: wrap(2)........wrap the port connect(3).....unwrap the port timedWrap(4)...time wrap port (us… |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.4 | Columns5TrPortWrapTime | read-write | mandatory | The length of time to keep the port wrapped when a timed wrap is done to the board. This object can only be written in the same request that sets s5TrPortWrapS… |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.5 | Columns5TrPortInsrtStatus | read-only | mandatory | The port insertion status. The values are: other(1).........status unknown notInserted(2)...port is not inserted inserted(3)......port inserted into the ring |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.6 | Columns5TrPortPhanStatus | read-only | mandatory | The port phantom status. The values are: other(1).............status unknown noPhantom(2).........no phantom signal phantom(3)...........phantom signal is on s… |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.7 | Columns5TrPortPhanChngs | read-only | mandatory | A counter of changes of s5TrPortPhanStatus from noPhantom(2) to phantom(3). |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.8 | Columns5TrPortTrnkAccMthdStrap | read-only | mandatory | The strap (hardware jumper) setting for the RI/RO port trunk validation method. The values are: notSupported(1)...a fiber port, or not a RI/RO port synoptics(2… |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.9 | Columns5TrPortTrnkAccMthd | read-write | mandatory | The operational setting for the RI/RO port trunk validation method. The following values can be written: synoptics(2)...use SynOptics method none(3)........no … |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.10 | Columns5TrPortClass | read-only | mandatory | The port class. The values are: other(1)......unknown or some other type ri(2).........Ring In port ro(3).........Ring Out port lobe(4).......Lobe port interna… |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.11 | Columns5TrPortMedia | read-only | mandatory | The port media type. The values are: other(1)...........unknown or some other type synFiber(2)........SynOptics Fiber stdFiber(3)........Standard Fiber copperA… |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.12 | Columns5TrPortConnector | read-only | mandatory | The port connector type. The values are: other(1)......unknown or some other type internal(2)...no external connector db9(3)........DB9 rj45(4).......RJ-45 fib… |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.13 | Columns5TrPortSoftwareInsertion | read-write | mandatory | This object reflects the capability for a port to connect to the Ring-In (RI) or Ring-Out (RO) port of a MAU by software controlled phantom insertion. The foll… |
| 1.3.6.1.4.1.45.1.6.7.1.1.1.14 | Columns5TrPortAFD | read-write | mandatory | This object reflects the capability for a port to disable AFD, Automatic Frequency Detection. The following values can be read: notCapableOfAFDDisable(1)... Th… |
| 1.3.6.1.4.1.45.1.6.7.1.2 | Tables5TrFpuTable | not-accessible | mandatory | A table containing information about each FPU (Frame Processing Unit) on a board. |
| 1.3.6.1.4.1.45.1.6.7.1.2.1 | Rows5TrFpuEntry | not-accessible | mandatory | A row in the Token Ring FPU table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.1.2.1.1 | Columns5TrFpuBrdIndx | read-only | mandatory | The index of the board. This corresponds to the index of the slot containing the board. |
| 1.3.6.1.4.1.45.1.6.7.1.2.1.2 | Columns5TrFpuIndx | read-only | mandatory | The index of the FPU on the board. The value ranges between 1 and the number of FPUs on the board. |
| 1.3.6.1.4.1.45.1.6.7.1.2.1.3 | Columns5TrFpuType | read-only | mandatory | The type of FPU. The values are: other(1).....other or unknown cluster(2)...FPU is associated with a cluster port(3)......FPU is associated with a port roving(… |
| 1.3.6.1.4.1.45.1.6.7.1.2.1.4 | Columns5TrFpuTypeIndx | read-only | mandatory | The index of the cluster or port that the FPU is associated with. The object s5TrFpuType type specifies the type. |
| 1.3.6.1.4.1.45.1.6.7.1.2.1.5 | Columns5TrFpuVer | read-only | obsolete | The version of the FPU. If not available, then the value is a zero length string. |
| 1.3.6.1.4.1.45.1.6.7.1.2.1.6 | Columns5TrFpuCapabilites | read-only | mandatory | The capabilities of the FPU. The values are: other (1)...............Other or unknown coreStatistics(2).......Core statistics FPU embeddedManagement(3)...FPU c… |
| 1.3.6.1.4.1.45.1.6.7.1.2.1.7 | Columns5TrFpuRunningMode | read-write | mandatory | The running mode of the FPU. These values are for both read and write with the exception of other(1) which is for read only. The values are: other(1)..........… |
| 1.3.6.1.4.1.45.1.6.7.1.3 | Tables5TrAttTable | not-accessible | mandatory | A table containing information about each Token Ring attachment point on a board. This table extends table s5ChasAttTable for Token Ring Boards. |
| 1.3.6.1.4.1.45.1.6.7.1.3.1 | Rows5TrAttEntry | not-accessible | mandatory | A row in Token Ring attachment table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.1.3.1.1 | Columns5TrAttBrdIndx | read-only | mandatory | The index of the board. This corresponds to the index of the slot containing the board. |
| 1.3.6.1.4.1.45.1.6.7.1.3.1.2 | Columns5TrAttIndx | read-only | mandatory | The index of the attachment point on the board. |
| 1.3.6.1.4.1.45.1.6.7.1.3.1.3 | Columns5TrAttDfltSpeed | read-only | mandatory | The default speed setting for the attachment point. The values are: other(1).....unknown or other speed s4Mbit(2)....4Mbit s16Mbit(3)...16Mbit |
| 1.3.6.1.4.1.45.1.6.7.1.3.1.4 | Columns5TrAttCurSpeed | read-write | mandatory | The current speed setting for the attachment point. The read-only value is: other(1).....unknown or other speed The read-write values are: s4Mbit(2)....4Mbit s… |
| 1.3.6.1.4.1.45.1.6.7.1.3.1.5 | Columns5TrAttFault | read-only | mandatory | A fault indicator for the attachment point. The values are: other(1).....not connected to a backplane network or value is unknown nofault(2)...no fault detecte… |
| 1.3.6.1.4.1.45.1.6.7.1.4 | Scalars5TrBkDiv | read-write | mandatory | Setting of the Token Ring backplane divider. The value that can only be read is: other(1)...unknown or other state Values that can be read and written are: spl… |
| 1.3.6.1.4.1.45.1.6.7.1.5 | Nodes5TrRingExt | |||
| 1.3.6.1.4.1.45.1.6.7.1.5.1 | Scalars5TrRingExtLastChange | read-only | mandatory | The value of sysUpTime when the last change of any Ring Extension table entry within the chassis was detected. |
| 1.3.6.1.4.1.45.1.6.7.1.5.2 | Scalars5TrRingExtCurNum | read-only | mandatory | The current number of entries in the Ring Extension Table. |
| 1.3.6.1.4.1.45.1.6.7.1.5.3 | Tables5TrRingExtTable | not-accessible | mandatory | A table containing information about each RI/RO (Ring In / Ring Out) pair on a board. The number of entries is determined by the number of existing RI/RO pairs… |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1 | Rows5TrRingExtEntry | not-accessible | mandatory | A row in the Ring Extension table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.1 | Columns5TrRingExtBoardIndx | read-only | mandatory | The index of the board which has RI/RO. This corresponds to the index of the slot containing the board. |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.2 | Columns5TrRingExtExtensionIndx | read-only | mandatory | The index of the RI/RO extension pair on the board. The value ranges between 1 and the number of RI/RO pairs on the board. |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.3 | Columns5TrRingExtRingNumber | read-only | mandatory | The logical ring number of the ring that RI/RO connects to. |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.4 | Columns5TrRingExtRingInUna | read-only | mandatory | The upstream neighbor address to the Ring In port. |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.5 | Columns5TrRingExtRingOutUna | read-only | mandatory | The upstream neighbor address to the Ring Out port. |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.6 | Columns5TrRingExtSecUna | read-only | mandatory | The (secondary) upstream neighbor address as read by the FPU that is located between RI and RO. |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.7 | Columns5TrRingExtRingInPhanStatus | read-only | mandatory | The phantom status of the Ring In port. The values are: other(1).........status unknown noPhantom(2).....no phantom signal phantom(3).......phantom signal is o… |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.8 | Columns5TrRingExtRingOutPhanStatus | read-only | mandatory | The phantom status of the Ring Out port. The values are: other(1).........status unknown noPhantom(2).....no phantom signal phantom(3).......phantom signal is … |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.9 | Columns5TrRingExtRingInWrapStatus | read-only | mandatory | The wrap status of the Ring-In port. The values are: other(1)............wrap status unknown wrap(2).............port is wrapped connect(3)..........port is un… |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.10 | Columns5TrRingExtRingOutWrapStatus | read-only | mandatory | The wrap status of the Ring-Out port. The values are: other(1)............wrap status unknown wrap(2).............port is wrapped connect(3)..........port is u… |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.11 | Columns5TrRingExtClusterNumber | read-only | mandatory | The cluster number where RI/RO pair is located on the board. |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.12 | Columns5TrRingExtRingInPortNumber | read-only | mandatory | The port number where RI is located on the board. |
| 1.3.6.1.4.1.45.1.6.7.1.5.3.1.13 | Columns5TrRingExtRingOutPortNumber | read-only | mandatory | The port number where RO is located on the board. |
| 1.3.6.1.4.1.45.1.6.7.1.5.4 | Scalars5TrRingExtEosSize | read-only | mandatory | The current size of a 'row' in the table s5TrRingExtEosTable. This allows applications to be able to break apart 'rows' in the table. |
| 1.3.6.1.4.1.45.1.6.7.1.5.5 | Tables5TrRingExtEosTable | not-accessible | mandatory | A table of encoded octet strings of entries in table s5TrRingExtTable. The number of entries is determined by the packing of 'rows' from s5TrRingExtTable. |
| 1.3.6.1.4.1.45.1.6.7.1.5.5.1 | Rows5TrRingExtEosEntry | not-accessible | mandatory | A row in the table of encoded octet strings for table s5TrRingExtTable. Instance returned in Response PDU: On GETs: instance specified is the instance returned… |
| 1.3.6.1.4.1.45.1.6.7.1.5.5.1.1 | Columns5TrRingExtEos | read-only | mandatory | An encoded octet string. On reads it contains an integral number of 'rows' from table s5TrRingExtTable. All 'rows' are the same size which is defined by object… |
| 1.3.6.1.4.1.45.1.6.7.1.6 | Tables5TrPortInfoTable | not-accessible | mandatory | A table containing information for each managed token ring connectivity port on a board, excluding ring in, ring out, and those used as cascade expansion. The … |
| 1.3.6.1.4.1.45.1.6.7.1.6.1 | Rows5TrPortInfoEntry | not-accessible | mandatory | A row in the port information table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.1 | Columns5TrPortInfoSrcIndx | read-only | mandatory | This index identifies the source of the information. Only those sources that provide these statistics are in this table. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.2 | Columns5TrPortInfoBrdIndx | read-only | mandatory | The index of the board. This corresponds to the index of the slot containing the board. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.3 | Columns5TrPortInfoPortIndx | read-only | mandatory | The index of the port on the board. Its value ranges between 1 and the number of manageable ports on the board. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.4 | Columns5TrPortInfoAddr | read-only | mandatory | The MAC address of the station currently/last attached to the port. If no station in the ring can be found attached to the port, the address should be 0 |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.5 | Columns5TrPortInfoLastNaun | read-only | mandatory | The MAC address of the last known NAUN (Next Active Upstream Neighbor) of the station currently/last attached to the port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.6 | Columns5TrPortInfoStationStatus | read-only | mandatory | The insertion status of the station currently/last attached to the port. The values are: active(1)..........Actively participating in ring poll from this port … |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.7 | Columns5TrPortInfoFirstEnterTime | read-only | mandatory | The value of sysUpTime when this port first time entered the ring. If the time is unknown, the value shall be zero. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.8 | Columns5TrPortInfoLastEnterTime | read-only | mandatory | The value of sysUpTime when this port last time entered the ring. If the time is unknown, the value shall be zero. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.9 | Columns5TrPortInfoLastExitTime | read-only | mandatory | The value of sysUpTime when this port last exited the ring. If the time is unknown, the value shall be zero. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.10 | Columns5TrPortInfoDupAddrErrs | read-only | mandatory | Total number of duplicate address error detected from this port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.11 | Columns5TrPortInfoLineErrs | read-only | mandatory | Total number of line errors detected from this port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.12 | Columns5TrPortInfoInternalErrs | read-only | mandatory | Total number of adapter internal errors detected from this port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.13 | Columns5TrPortInfoBurstErrs | read-only | mandatory | Total number of burst errors detected from this port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.14 | Columns5TrPortInfoACErrs | read-only | mandatory | Total number of AC (Address Copied) errors detected from this port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.15 | Columns5TrPortInfoAbortErrs | read-only | mandatory | Total number of abort delimiter transmitted errors detected from this port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.16 | Columns5TrPortInfoLostFrameErrs | read-only | mandatory | Total number of lost frame errors detected from this port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.17 | Columns5TrPortInfoCongestionErrs | read-only | mandatory | Total number of receive congestion errors detected from this port . |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.18 | Columns5TrPortInfoFrameCopiedErrs | read-only | mandatory | Total number of frame copied errors detected from this port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.19 | Columns5TrPortInfoFrequencyErrs | read-only | mandatory | Total number of frequency errors detected from this port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.20 | Columns5TrPortInfoTokenErrs | read-only | mandatory | Total number of token errors detected from this port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.21 | Columns5TrPortInfoBeaconErrs | read-only | mandatory | Total number of beacon frames detected from this port. |
| 1.3.6.1.4.1.45.1.6.7.1.6.1.22 | Columns5TrPortInfoInsertions | read-only | mandatory | Total number of times that the port was detected inserting into the ring. |
| 1.3.6.1.4.1.45.1.6.7.1.7 | Tables5TrPortFpuStatsTable | not-accessible | mandatory | A table containing FPU statistics information for each managed token ring connectivity port on a board. |
| 1.3.6.1.4.1.45.1.6.7.1.7.1 | Rows5TrPortFpuStatsEntry | not-accessible | mandatory | A row in the Port FPU statistics table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.1.7.1.1 | Columns5TrPortFpuStatsBrdIndx | read-only | mandatory | The index of the board. This corresponds to the index of the slot containing the board. |
| 1.3.6.1.4.1.45.1.6.7.1.7.1.2 | Columns5TrPortFpuStatsPortIndx | read-only | mandatory | The index of the port on the board. The value ranges between 1 and the number of manageable ports on the board. |
| 1.3.6.1.4.1.45.1.6.7.1.7.1.3 | Columns5TrPortFpuStatsAddr | read-only | mandatory | The MAC address of the station currently/last attached to the port. For ring in, ring out and cascade expansion ports, this MAC address is the UNA (Upstream Ne… |
| 1.3.6.1.4.1.45.1.6.7.1.7.1.4 | Columns5TrPortFpuStatsTxOctets | read-only | mandatory | Total number of octets transmitted at this port. If no station is connected to the port, the counter should return the last collected value. |
| 1.3.6.1.4.1.45.1.6.7.1.7.1.5 | Columns5TrPortFpuStatsTxPkts | read-only | mandatory | Total number of packets transmitted at this port. If no station is connected to the port, the counter should return the last collected value. |
| 1.3.6.1.4.1.45.1.6.7.1.7.1.6 | Columns5TrPortFpuStatsRxOctets | read-only | mandatory | Total number of octets received at this port. If no station is connected to the port, the counter should return the last collected value. |
| 1.3.6.1.4.1.45.1.6.7.1.7.1.7 | Columns5TrPortFpuStatsRxPkts | read-only | mandatory | The number of packets receive at this port. If no station is connected to the port, the counter should return the last collected value. |
| 1.3.6.1.4.1.45.1.6.7.2.1 | Tables5TrBStatTable | not-accessible | mandatory | A table containing Token Ring basic statistics. The entries in the table may come from several different data sources including FPUs (Frame Processing Units) a… |
| 1.3.6.1.4.1.45.1.6.7.2.1.1 | Rows5TrBStatEntry | not-accessible | mandatory | A row in Token Ring basic statistics table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.1 | Columns5TrBStatSrcIndx | read-only | mandatory | The index of the entry in the table. This index identifies the source of the information. Only those sources that provide these statistics are in this table. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.2 | Columns5TrBStatTtlOctets | read-only | mandatory | The total number of octets of data in LLC frames and MAC frames (including frames with errors) measured on the ring (excluding framing bits, but including FCS … |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.3 | Columns5TrBStatMacOctets | read-only | mandatory | The total number of octets of data in MAC frames (including frames with errors) measured on the ring (excluding framing bits, but including FCS octets). |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.4 | Columns5TrBStatLlcOctets | read-only | mandatory | The total number of octets of data in LLC frames (including frames with errors) measured on the ring (excluding framing bits, but including FCS octets). |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.5 | Columns5TrBStatTtlFrms | read-only | mandatory | The total number of LLC frames and MAC frames (including frames with errors) detected on the ring. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.6 | Columns5TrBStatTtlGoodFrms | read-only | mandatory | The total number of LLC frames and MAC frames (excluding frames with errors) detected on the ring. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.7 | Columns5TrBStatTtlBadFrms | read-only | mandatory | The total number of LLC frames and MAC frames with errors detected on the ring. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.8 | Columns5TrBStatMacFrms | read-only | mandatory | The total number of MAC frames (including frames with errors) detected on the ring. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.9 | Columns5TrBStatLlcFrms | read-only | mandatory | The total number of LLC frames (including frames with errors) detected on the ring. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.10 | Columns5TrBStatLlcNonUcastFrms | read-only | mandatory | The total number of LLC frames (including frames with errors) detected on the ring that were directed to a LLC broadcast address (i.e., 0xFFFFFFFFFFFF or 0xC00… |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.11 | Columns5TrBStatLlcUcastFrms | read-only | mandatory | The total number of LLC frames (including frames with errors) detected on the ring that were directed to a LLC unicast address. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.12 | Columns5TrBStatGoodErrReportFrms | read-only | mandatory | The total number of Soft error Report frames (excluding frames with errors) detected on the ring. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.13 | Columns5TrBStatBeaconFrms | read-only | mandatory | The total number of Beacon frames (including frames with errors) detected on the ring. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.14 | Columns5TrBStatRingPurgeFrms | read-only | mandatory | The total number of Ring Purge frames (including frames with errors) detected on the ring. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.15 | Columns5TrBStatClaimTokenFrms | read-only | mandatory | The total number of Claim Token frames (including frames with errors) detected on the ring. |
| 1.3.6.1.4.1.45.1.6.7.2.1.1.16 | Columns5TrBStatUna | read-only | mandatory | The MAC address of the next active upstream neighbor (NAUN) (or upstream neighbor address (UNA)) of the ring monitoring source. If it is unknown or at power re… |
| 1.3.6.1.4.1.45.1.6.7.2.2 | Tables5TrFStatTable | not-accessible | obsolete | A table containing Token Ring frame size distribution statistics. These statistics are for LLC frames. Counters for frames and octets can be found in the basic… |
| 1.3.6.1.4.1.45.1.6.7.2.2.1 | Rows5TrFStatEntry | not-accessible | obsolete | A row in Token Ring frame size distribution statistics table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.1 | Columns5TrFStatSrcIndx | read-only | obsolete | The index of the entry in the table. This index identifies the source of the information. Only those sources that provide these statistics are in this table. |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.2 | Columns5TrFStatDropEvents | read-only | obsolete | The total number of events in which frames were dropped by the data source due to lack of resources. Note that this number is not necessarily the number of fra… |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.3 | Columns5TrFStatLlcFrms18to63Octets | read-only | obsolete | The total number of LLC frames (excluding frames with errors) measured on the ring that were between 18 and 63 octets in length inclusive, excluding framing bi… |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.4 | Columns5TrFStatLlcFrms64to127Octets | read-only | obsolete | The total number of LLC frames (excluding frames with errors) measured on the ring that were between 64 and 127 octets in length inclusive, excluding framing b… |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.5 | Columns5TrFStatLlcFrms128to255Octets | read-only | obsolete | The total number of LLC frames (excluding frames with errors) measured on the ring that were between 128 and 255 octets in length inclusive, excluding framing … |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.6 | Columns5TrFStatLlcFrms256to511Octets | read-only | obsolete | The total number of LLC frames (excluding frames with errors) measured on the ring that were between 256 and 511 octets in length inclusive, excluding framing … |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.7 | Columns5TrFStatLlcFrms512to1023Octets | read-only | obsolete | The total number of LLC frames (excluding frames with errors) measured on the ring that were between 512 and 1023 octets in length inclusive, excluding framing… |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.8 | Columns5TrFStatLlcFrms1024to2047Octets | read-only | obsolete | The total number of LLC frames (excluding frames with errors) measured on the ring that were between 1024 and 2047 octets in length inclusive, excluding framin… |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.9 | Columns5TrFStatLlcFrms2048to4095Octets | read-only | obsolete | The total number of LLC frames (excluding frames with errors) measured on the ring that were between 2048 and 4095 octets in length inclusive, excluding framin… |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.10 | Columns5TrFStatLlcFrms4096to8191Octets | read-only | obsolete | The total number of LLC frames (excluding frames with errors) measured on the ring that were between 4096 and 8191 octets in length inclusive, excluding framin… |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.11 | Columns5TrFStatLlcFrms8192to18000Octets | read-only | obsolete | The total number of LLC frames (excluding frames with errors) measured on the ring that were between 8192 and 18000 octets in length inclusive, excluding frami… |
| 1.3.6.1.4.1.45.1.6.7.2.2.1.12 | Columns5TrFStatLlcFrmsGreaterThan18000Octets | read-only | obsolete | The total number of LLC frames (excluding frames with errors) measured on the ring that were greater than 18000 octets in length, excluding framing bits but in… |
| 1.3.6.1.4.1.45.1.6.7.2.3 | Tables5TrEStatTable | not-accessible | mandatory | A table containing Token Ring error statistics. The entries in the table may come from several different data sources. The number of entries is determined by t… |
| 1.3.6.1.4.1.45.1.6.7.2.3.1 | Rows5TrEStatEntry | not-accessible | mandatory | A row in Token Ring error statistics table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.1 | Columns5TrEStatSrcIndx | read-only | mandatory | The index of the entry in the table. This index identifies the source of the information. Only those sources that provide these statistics are in this table. |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.2 | Columns5TrEStatDropEvents | read-only | obsolete | Total number of events in which frames were dropped by the data source due to lack of resources. Note that this number is not necessarily the number of frames … |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.3 | Columns5TrEStatLineErrs | read-only | mandatory | Total number of line errors reported by all stations in error report frames and detected on the ring. Section 3.8.1 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.4 | Columns5TrEStatInternalErrs | read-only | mandatory | Total number of adapter internal errors reported by all stations in error report frames and detected on the ring. Section 3.8.2 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.5 | Columns5TrEStatBurstErrs | read-only | mandatory | Total number of burst errors reported by all stations in error report frames and detected on the ring. Section 3.8.3 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.6 | Columns5TrEStatACErrs | read-only | mandatory | Total number of AC (Address Copied) errors reported by all stations in error report frames and detected on the ring. Section 3.8.4 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.7 | Columns5TrEStatAbortErrs | read-only | mandatory | Total number of abort delimiter transmitted errors reported by all stations in error report frames and detected on the ring. Section 3.8.5 of IEEE 802.5 specif… |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.8 | Columns5TrEStatLostFrameErrs | read-only | mandatory | Total number of frames lost errors reported by all stations in error report frames and detected on the ring. Section 3.8.6 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.9 | Columns5TrEStatCongestionErrs | read-only | mandatory | Total number of receive congestion errors reported by all stations in error report frames and detected on the ring. Section 3.8.7 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.10 | Columns5TrEStatFrameCopiedErrs | read-only | mandatory | Total number of frame copied errors reported by all stations in error report frames and detected on the ring. Section 3.8.8 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.11 | Columns5TrEStatFrequencyErrs | read-only | mandatory | Total number of frequency errors reported by all stations in error report frames and detected on the ring. Section 3.8.9 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.12 | Columns5TrEStatTokenErrs | read-only | mandatory | Total number of token errors reported by all stations in error report frames and detected on the ring. Section 3.8.10 of IEEE 802.5 specification. |
| 1.3.6.1.4.1.45.1.6.7.2.3.1.13 | Columns5TrEStatSoftErrFrms | read-only | mandatory | Total number of error report frames detected on the ring. (Note: this has the same count as object s5TrBStatGoodErrReportFrms.) |