TIARA-FR-MIB
69 objects
This file contains Tiara Network Inc. specific MIB module for Frame Relay implementation.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.16 | IdentitytiaraFrMib | This file contains Tiara Network Inc. specific MIB module for Frame Relay implementation. | ||
| 1.3.6.1.4.1.3174.2.16.1 | TablefrTable | not-accessible | current | A list of a Frame Relay interface configuration parameters. The table contains parameters for both the uni and multi link frame-relay interface. |
| 1.3.6.1.4.1.3174.2.16.1.1 | RowfrTableEntry | not-accessible | current | An entry in the frTable. The bundle Id forms the index into the table. |
| 1.3.6.1.4.1.3174.2.16.1.1.1 | ColumnfrIfEnable | read-write | current | Enables or disables the frame-relay interface. By default frame- relay interface is enabled. Writing zero (0) disables frame-relay interface. |
| 1.3.6.1.4.1.3174.2.16.1.1.2 | ColumnfrEnablePvcAll | read-write | current | Enables all PVCs related to the interface. By default all PVCs related to an interface are disabled. Writing One (1) enables all PVCs at the same time for an i… |
| 1.3.6.1.4.1.3174.2.16.1.1.3 | ColumnfrFrameSize | read-write | current | Maximum Size of the frame that will be configured for this Frame Relay interface. The value for frame size ranges from 56 to 4096 bytes, with a default value o… |
| 1.3.6.1.4.1.3174.2.16.1.1.4 | ColumnfrIfType | read-write | current | Indicates the interface type for the frame-relay interface. |
| 1.3.6.1.4.1.3174.2.16.1.1.5 | ColumnfrLmiType | read-write | current | Local management Interface type for the frame-relay interface. It can take any of the following three values: ansi - ANSI T1.617 (Annex D), cisco - Cisco LMI, … |
| 1.3.6.1.4.1.3174.2.16.1.1.6 | ColumnfrLmiDceN392 | read-write | current | DCE/UNI error threshold value. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured. |
| 1.3.6.1.4.1.3174.2.16.1.1.7 | ColumnfrLmiDceN393 | read-write | current | DCE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured. |
| 1.3.6.1.4.1.3174.2.16.1.1.8 | ColumnfrLmiDteN392 | read-write | current | DTE/UNI error threshold. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured. |
| 1.3.6.1.4.1.3174.2.16.1.1.9 | ColumnfrLmiDteN393 | read-write | current | DTE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured. |
| 1.3.6.1.4.1.3174.2.16.1.1.10 | ColumnfrLmiDteN391 | read-write | current | DTE/UNI full status polling interval. Ranges from 1 to 255, with a default value of 6. To configure the value of this variable, LMI type should be configured. |
| 1.3.6.1.4.1.3174.2.16.1.1.11 | ColumnfrLmiKeepalive | read-write | current | Local management interface keepalive polling interval time in seconds. The value for this ranges from 5 seconds to 255 seconds with a default value of 10 secon… |
| 1.3.6.1.4.1.3174.2.16.1.1.12 | ColumnmfrAckMsgTimer | read-write | current | The time to wait for an ADD_LINK_ACK message before timing out. |
| 1.3.6.1.4.1.3174.2.16.1.1.13 | ColumnmfrAckMsgMaxRetry | read-write | current | Maximum number of Retries for the Ack Msg. This variable can be set on a multilink bundle. |
| 1.3.6.1.4.1.3174.2.16.1.1.14 | ColumnmfrClass | read-write | current | classA classB classC are UP. In the case of classC, mfrClassThreshold should be configured with mfrClass in an atomic set operation. This variable can be set o… |
| 1.3.6.1.4.1.3174.2.16.1.1.15 | ColumnmfrClassThreshold | read-write | current | Threshold - minimum number of links required to activate bundle, for a mfrClass, classC. This variable can be set on a multilink bundle but not on a uni link b… |
| 1.3.6.1.4.1.3174.2.16.1.1.16 | ColumnmfrFrameSize | read-write | current | The frame size for multi-link frame relay. This variable can be set on a multilink bundle but not on a uni link bundle. |
| 1.3.6.1.4.1.3174.2.16.1.1.17 | ColumnmfrHelloTimer | read-write | current | Hello timer in seconds. This variable can be set on a multilink bundle but not on a uni link bundle. |
| 1.3.6.1.4.1.3174.2.16.1.1.18 | ColumnmfrSegThreshold | read-write | current | Segment threshold packet size in bytes. This variable can be set on a multilink bundle but not on a uni link bundle. |
| 1.3.6.1.4.1.3174.2.16.1.1.19 | ColumnmfrDiffDelay | read-write | current | Differential delay in milli seconds. This variable can be set on a multilink bundle but not on a uni link bundle. |
| 1.3.6.1.4.1.3174.2.16.2 | TablefrPvcTable | not-accessible | current | A list of Frame Relay PVC parameters. |
| 1.3.6.1.4.1.3174.2.16.2.1 | RowfrPvcTableEntry | not-accessible | current | An entry in the frPvcTable |
| 1.3.6.1.4.1.3174.2.16.2.1.1 | ColumnfrPvcDlci | not-accessible | current | Data Link Connection Identifier of the PVC. The value ranges from 16 to 991. The Dlci is unique for a bundle but Dlci numbers can be reused across bundles. |
| 1.3.6.1.4.1.3174.2.16.2.1.2 | ColumnfrPvcEnable | read-create | current | Enables PVC for given interface name and DLCI number. By default PVC is disabled. Writing one(1) on this enables PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.3 | ColumnfrPvcDescr | read-create | current | Description for the configured PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.4 | ColumnfrPvcIpAddr | read-create | current | IP address to be configured for the PVC. PVC IP subnet Mask variable should also be configured alongwith this variable. A set on this variable will be successf… |
| 1.3.6.1.4.1.3174.2.16.2.1.5 | ColumnfrPvcIpSubnetMask | read-create | current | Subnet mask to be configured alongwith PVC IP address. This variable should be configured alongwith PVC IP address. |
| 1.3.6.1.4.1.3174.2.16.2.1.6 | ColumnfrPvcSrcForwardingPrimary | read-create | current | Source forwarding IP address to be configured for PVC. To unconfigure the source forwarding address, a set is issued with the value of the address as 0.0.0.0. … |
| 1.3.6.1.4.1.3174.2.16.2.1.7 | ColumnfrPvcSrcForwardingSecondary | read-create | current | Optional secondary source forwarding address configured for PVC, using alternate ethernet as backup. This variable should be configured along with the PVC prim… |
| 1.3.6.1.4.1.3174.2.16.2.1.8 | ColumnfrPvcRemoteIpAddr | read-create | current | Remote IP address to be mapped for PVC |
| 1.3.6.1.4.1.3174.2.16.2.1.9 | ColumnfrPvcPolicingEnable | read-create | current | This variable is to disable/enable policing for PVC. Writing zero (0) on this disables policing for the PVC. By default policing is enabled. |
| 1.3.6.1.4.1.3174.2.16.2.1.10 | ColumnfrPvcPolicingDe | read-create | current | If enabled, received frames that exceed policing threshold, will be tagged with DE bit. This variable can be configured only if policing is enabled. |
| 1.3.6.1.4.1.3174.2.16.2.1.11 | ColumnfrPvcPolicingCir | read-create | current | Committed Information Rate( bits per second ) in receive direction for PVC. This variable can be configured only if policing is enabled. |
| 1.3.6.1.4.1.3174.2.16.2.1.12 | ColumnfrPvcPolicingBc | read-create | current | Committed Burst ( bits ) in receive direction for PVC. This variable can be configured only if policing is enabled. |
| 1.3.6.1.4.1.3174.2.16.2.1.13 | ColumnfrPvcPolicingBe | read-create | current | Excess burst ( bits ) in receive direction for PVC. This variable can be configured only if policing enabled. |
| 1.3.6.1.4.1.3174.2.16.2.1.14 | ColumnfrPvcShapingCir | read-create | current | The committed information rate (in bits per second) to be configured for the PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.15 | ColumnfrPvcShapingBcMax | read-create | current | The maximum committed burst (bits) to be configured for the PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.16 | ColumnfrPvcShapingBcMin | read-create | current | The minimum committed burst (bits) to be configured for the PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.17 | ColumnfrPvcShapingBe | read-create | current | The excess burst (bits) to be configured for the PVC. |
| 1.3.6.1.4.1.3174.2.16.2.1.18 | ColumnfrPvcDlciForSwitching | read-create | current | Data Link Connection Identifier of the PVC. The value for this variable ranges from 16 to 991. frPvcBundleNameForSwitching should be set with frPvcDlciForSwitc… |
| 1.3.6.1.4.1.3174.2.16.2.1.19 | ColumnfrPvcBundleNameForSwitching | read-create | current | The name of the bundle configured for Switching. |
| 1.3.6.1.4.1.3174.2.16.2.1.20 | ColumnfrPvcRowStatus | read-create | current | To create a row set row status to a value CreateAndGo(4), indexed by bundle Id and the desired dlci number. |
| 1.3.6.1.4.1.3174.2.16.3 | TablefrStatsTable | not-accessible | current | The statistics objects for a frame-relay interface. |
| 1.3.6.1.4.1.3174.2.16.3.1 | RowfrStatsTableEntry | not-accessible | current | An entry in the frStatsTable. |
| 1.3.6.1.4.1.3174.2.16.3.1.1 | ColumnfrStatsFramesRx | read-only | current | Numbers of frames received. |
| 1.3.6.1.4.1.3174.2.16.3.1.2 | ColumnfrStatsInvFramesRx | read-only | current | Number of invalid frames received |
| 1.3.6.1.4.1.3174.2.16.3.1.3 | ColumnfrStatsFECNsRx | read-only | current | Number of frames received with FECN bit on |
| 1.3.6.1.4.1.3174.2.16.3.1.4 | ColumnfrStatsBECNsRx | read-only | current | Number of frames received with BECN bit on. |
| 1.3.6.1.4.1.3174.2.16.3.1.5 | ColumnfrStatsShortFramesRx | read-only | current | Number of short frames received. |
| 1.3.6.1.4.1.3174.2.16.3.1.6 | ColumnfrStatsLongFramesRx | read-only | current | Number of long frames received. |
| 1.3.6.1.4.1.3174.2.16.3.1.7 | ColumnfrStatsInvDLCIsRx | read-only | current | Number of frames with invalid dlci received |
| 1.3.6.1.4.1.3174.2.16.3.1.8 | ColumnfrStatsUnknownDLCIsRx | read-only | current | Number of frames with unknown dlci received |
| 1.3.6.1.4.1.3174.2.16.3.1.9 | ColumnfrStatsFramesTx | read-only | current | Number of frames transmitted. |
| 1.3.6.1.4.1.3174.2.16.4 | TablefrPvcStatsTable | not-accessible | current | FR PVC Statistics Table |
| 1.3.6.1.4.1.3174.2.16.4.1 | RowfrPvcStatsTableEntry | not-accessible | current | An entry in the FrPvcStats Table |
| 1.3.6.1.4.1.3174.2.16.4.1.1 | ColumnfrPvcStatsBytesRxLastBootOrClear | read-only | current | Number of bytes received on a pvc since boot or last statistics clear. |
| 1.3.6.1.4.1.3174.2.16.4.1.2 | ColumnfrPvcStatsBytesTxLastBootOrClear | read-only | current | Number of bytes transmitted on a pvc since boot or last statistics clear. |
| 1.3.6.1.4.1.3174.2.16.4.1.3 | ColumnfrPvcStatsPktsRxLastBootOrClear | read-only | current | Number of packets received since boot or last statistics clear. |
| 1.3.6.1.4.1.3174.2.16.4.1.4 | ColumnfrPvcStatsPktsTxLastBootOrClear | read-only | current | Number of packets transmitted since boot or last statistics clear. |
| 1.3.6.1.4.1.3174.2.16.4.1.5 | ColumnfrPvcStatsErrPktsRxLastBootOrClear | read-only | current | Number of errored packets received since boot or last statistics clear. |
| 1.3.6.1.4.1.3174.2.16.4.1.6 | ColumnfrPvcStatsUpDownStatesLastBootOrClear | read-only | current | Number of times state(up or down) of the pvc changed in since boot or last statistics clear. |
| 1.3.6.1.4.1.3174.2.16.4.1.7 | ColumnfrPvcStatsBytesRxLastFiveMins | read-only | current | Number of bytes received in the last five minutes. |
| 1.3.6.1.4.1.3174.2.16.4.1.8 | ColumnfrPvcStatsBytesTxLastFiveMins | read-only | current | Number of bytes transmitted in the last five minutes. |
| 1.3.6.1.4.1.3174.2.16.4.1.9 | ColumnfrPvcStatsPktsRxLastFiveMins | read-only | current | Number of packets received in the last five minutes. |
| 1.3.6.1.4.1.3174.2.16.4.1.10 | ColumnfrPvcStatsPktsTxLastFiveMins | read-only | current | Number of packets transmitted in the last five minutes. |
| 1.3.6.1.4.1.3174.2.16.4.1.11 | ColumnfrPvcStatsErrPktsRxLastFiveMins | read-only | current | Number of errored packets received in the last five minutes. |
| 1.3.6.1.4.1.3174.2.16.4.1.12 | ColumnfrPvcStatsUpDownStatesLastFiveMins | read-only | current | Number of times state(up or down) of the pvc changed in the last five minutes. |