VERTICAL-ISDN-MIB
43 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2338.5 | NodevisdnMibObjects | |||
| 1.3.6.1.4.1.2338.5.2 | NodevisdnBearerGroup | |||
| 1.3.6.1.4.1.2338.5.2.1 | TablevisdnBearerTable | not-accessible | mandatory | This table defines port specific operational, statistics and active call data for ISDN B channels. Each entry in this table describes one B (bearer) channel. |
| 1.3.6.1.4.1.2338.5.2.1.1 | RowvisdnBearerEntry | not-accessible | mandatory | Operational and statistics information relating to one port. A port is a single B channel. |
| 1.3.6.1.4.1.2338.5.2.1.1.1 | ColumnvisdnBearerChannelType | read-only | mandatory | The B channel type. If the B channel is connected to a dialup line, this object has a value of dialup(1). In this case, it is controlled by an associated signa… |
| 1.3.6.1.4.1.2338.5.2.1.1.2 | ColumnvisdnBearerOperStatus | read-only | mandatory | The current call control state for this port. idle(1): The B channel is idle. No call or call attempt is going on. connecting(2): A connection attempt (outgoin… |
| 1.3.6.1.4.1.2338.5.2.1.1.3 | ColumnvisdnBearerChannelNumber | read-only | mandatory | The identifier being used by a signaling protocol to identify this B channel, also referred to as B channel number. If the Agent also supports the DS0 MIB, the… |
| 1.3.6.1.4.1.2338.5.2.1.1.4 | ColumnvisdnBearerPeerAddress | read-only | mandatory | The ISDN address the current or last call is or was connected to. In some cases, the format of this information can not be predicted, since it largely depends … |
| 1.3.6.1.4.1.2338.5.2.1.1.5 | ColumnvisdnBearerPeerSubAddress | read-only | mandatory | The ISDN subaddress the current or last call is or was connected to. The subaddress is an user supplied string of up to 20 IA5 characters and is transmitted tr… |
| 1.3.6.1.4.1.2338.5.2.1.1.6 | ColumnvisdnBearerCallOrigin | read-only | mandatory | The call origin for the current or last call. If since system startup there was no call on this interface, this object has a value of unknown(1). |
| 1.3.6.1.4.1.2338.5.2.1.1.7 | ColumnvisdnBearerInfoType | read-only | mandatory | The Information Transfer Capability for the current or last call. speech(2) refers to a non-data connection, whereas audio31(6) and audio7(7) refer to data mod… |
| 1.3.6.1.4.1.2338.5.2.1.1.8 | ColumnvisdnBearerMultirate | read-only | mandatory | This flag indicates if the current or last call used multirate. The actual information transfer rate, in detail specified in octet 4.1 (rate multiplier), is th… |
| 1.3.6.1.4.1.2338.5.2.1.1.9 | ColumnvisdnBearerCallSetupTime | read-only | mandatory | The value of sysUpTime when the ISDN setup message for the current or last call was sent or received. If since system startup there has been no call on this in… |
| 1.3.6.1.4.1.2338.5.2.1.1.10 | ColumnvisdnBearerCallConnectTime | read-only | mandatory | The value of sysUpTime when the ISDN connect message for the current or last call was sent or received. If since system startup there has been no call on this … |
| 1.3.6.1.4.1.2338.5.2.1.1.11 | ColumnvisdnBearerChargedUnits | read-only | mandatory | The number of charged units for the current or last connection. For incoming calls or if charging information is not supplied by the switch, the value of this … |
| 1.3.6.1.4.1.2338.5.3 | NodevisdnSignalingGroup | |||
| 1.3.6.1.4.1.2338.5.3.1 | ScalarvisdnSignalingGetIndex | read-only | mandatory | The recommended procedure for selecting a new index for visdnSignalingTable row creation is to GET the value of this object, and then to SET the object with th… |
| 1.3.6.1.4.1.2338.5.3.2 | TablevisdnSignalingTable | not-accessible | mandatory | ISDN signaling table containing configuration and operational parameters for all ISDN signaling channels on this managed device. |
| 1.3.6.1.4.1.2338.5.3.2.1 | RowvisdnSignalingEntry | not-accessible | mandatory | An entry in the ISDN Signaling Table. To create a new entry, only visdnSignalingProtocol needs to be specified before visdnSignalingStatus can become valid(1). |
| 1.3.6.1.4.1.2338.5.3.2.1.1 | ColumnvisdnSignalingIndex | not-accessible | mandatory | The index value which uniquely identifies an entry in the visdnSignalingTable. |
| 1.3.6.1.4.1.2338.5.3.2.1.2 | ColumnvisdnSignalingIfIndex | read-only | mandatory | The ifIndex value of the interface associated with this signaling channel. |
| 1.3.6.1.4.1.2338.5.3.2.1.3 | ColumnvisdnSignalingProtocol | read-only | mandatory | The particular protocol type supported by the switch providing access to the ISDN network to which this signaling channel is connected. |
| 1.3.6.1.4.1.2338.5.3.2.1.4 | ColumnvisdnSignalingCallingAddress | read-only | mandatory | The ISDN Address to be assigned to this signaling channel. More specifically, this is the 'Calling Address information element' as being passed to the switch i… |
| 1.3.6.1.4.1.2338.5.3.2.1.5 | ColumnvisdnSignalingSubAddress | read-only | mandatory | Supplementary information to the ISDN address assigned to this signaling channel. Usually, this is the subaddress as defined in Q.931. If there is no such numb… |
| 1.3.6.1.4.1.2338.5.3.2.1.6 | ColumnvisdnSignalingBchannelCount | read-only | mandatory | The total number of B channels (bearer channels) managed by this signaling channel. The default value of this object depends on the physical interface type and… |
| 1.3.6.1.4.1.2338.5.3.2.1.7 | ColumnvisdnSignalingInfoTrapEnable | read-only | mandatory | Indicates whether visdnMibCallInformation traps should be generated for calls on this signaling channel. |
| 1.3.6.1.4.1.2338.5.3.2.1.8 | ColumnvisdnSignalingStatus | read-only | mandatory | This object is used to create and delete rows in the visdnSignalingTable. |
| 1.3.6.1.4.1.2338.5.3.3 | TablevisdnSignalingStatsTable | not-accessible | mandatory | ISDN signaling table containing statistics information for all ISDN signaling channels on this managed device. Only statistical information which is not alread… |
| 1.3.6.1.4.1.2338.5.3.3.1 | RowvisdnSignalingStatsEntry | not-accessible | mandatory | An entry in the ISDN Signaling statistics Table. |
| 1.3.6.1.4.1.2338.5.3.3.1.1 | ColumnvisdnSigStatsInCalls | read-only | mandatory | The number of incoming calls on this interface. |
| 1.3.6.1.4.1.2338.5.3.3.1.2 | ColumnvisdnSigStatsInConnected | read-only | mandatory | The number of incoming calls on this interface which were actually connected. |
| 1.3.6.1.4.1.2338.5.3.3.1.3 | ColumnvisdnSigStatsOutCalls | read-only | mandatory | The number of outgoing calls on this interface. |
| 1.3.6.1.4.1.2338.5.3.3.1.4 | ColumnvisdnSigStatsOutConnected | read-only | mandatory | The number of outgoing calls on this interface which were actually connected. |
| 1.3.6.1.4.1.2338.5.3.3.1.5 | ColumnvisdnSigStatsChargedUnits | read-only | mandatory | The number of charging units on this interface since system startup. Only the charging units applying to the local interface, i.e. for originated calls or for … |
| 1.3.6.1.4.1.2338.5.3.4 | TablevisdnLapdTable | not-accessible | mandatory | Table containing configuration and statistics information for all LAPD (D channel Data Link) interfaces on this managed device. Only statistical information wh… |
| 1.3.6.1.4.1.2338.5.3.4.1 | RowvisdnLapdEntry | not-accessible | mandatory | An entry in the LAPD Table. |
| 1.3.6.1.4.1.2338.5.3.4.1.1 | ColumnvisdnLapdPrimaryChannel | read-only | mandatory | If set to true(1), this D channel is the designated primary D channel if D channel backup is active. There must be exactly one primary D channel configured. If… |
| 1.3.6.1.4.1.2338.5.3.4.1.2 | ColumnvisdnLapdOperStatus | read-only | mandatory | The operational status of this interface: inactive all layers are inactive l1Active layer 1 is activated, layer 2 datalink not established l2Active layer 1 is … |
| 1.3.6.1.4.1.2338.5.3.4.1.3 | ColumnvisdnLapdPeerSabme | read-only | mandatory | The number of peer SABME frames received on this interface. This is the number of peer-initiated new connections on this interface. |
| 1.3.6.1.4.1.2338.5.3.4.1.4 | ColumnvisdnLapdRecvdFrmr | read-only | mandatory | The number of LAPD FRMR response frames received. This is the number of framing errors on this interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IsdnSignalingProtocol | INTEGER { other(1), ess4(5), ess5(6), dms100(7), ni2(10), dms100s100 (263) } | ||
| TestAndIncr | INTEGER (0..2147483647) | ||
| TruthValue | INTEGER { true(1), false(2) } |