VERTICAL-SNMP-REPEATER-MIB
79 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge TimeTicks |
| RFC1213-MIB | DisplayString |
| RFC1271-MIB | OwnerString |
| VERTICALT1-E1-MIB | vertical |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2338.4 | NodevsnmpDot3RptrMgt | |||
| 1.3.6.1.4.1.2338.4.1 | NodevrptrBasicPackage | |||
| 1.3.6.1.4.1.2338.4.1.2 | NodevrptrGroupInfo | |||
| 1.3.6.1.4.1.2338.4.1.2.1 | TablevrptrGroupTable | not-accessible | mandatory | Table of descriptive and status information about the groups of ports. |
| 1.3.6.1.4.1.2338.4.1.2.1.1 | RowvrptrGroupEntry | not-accessible | mandatory | An entry in the table, containing information about a single group of ports. |
| 1.3.6.1.4.1.2338.4.1.2.1.1.1 | ColumnvrptrGroupIndex | read-only | mandatory | This object identifies the group within the system for which this entry contains information. |
| 1.3.6.1.4.1.2338.4.1.2.1.1.3 | ColumnvrptrGroupObjectID | read-only | mandatory | The vendor's authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-fo… |
| 1.3.6.1.4.1.2338.4.1.2.1.1.4 | ColumnvrptrGroupOperStatus | read-only | mandatory | An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/o… |
| 1.3.6.1.4.1.2338.4.1.2.1.1.6 | ColumnvrptrGroupPortCapacity | read-only | mandatory | The rptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-2147483647. Within each group, the ports are uniquely… |
| 1.3.6.1.4.1.2338.4.1.2.1.1.7 | ColumnvrptrGroupSlotNumber | read-only | mandatory | The physical slot number in the Vertical's InstantOffice box that this repeater group resides. |
| 1.3.6.1.4.1.2338.4.1.2.1.1.8 | ColumnvrptrGroupBroadcastDomainNumber | read-only | mandatory | This object indicates the repeater's broadcast domain. A broadcast domain is an Ethernet segment or set of segments throughout which a broadcast frame will be … |
| 1.3.6.1.4.1.2338.4.1.2.1.1.9 | ColumnvrptrGroupNetworkAdapterNumber | read-only | mandatory | This object indicates the identification number of the InstantOffice network adapter associated with the repeater, if any. This value will be 0 if the repeated… |
| 1.3.6.1.4.1.2338.4.1.2.1.1.10 | ColumnvrptrGroupLedStatus | read-only | mandatory | This object indicates the status of the card LEDs. The LED status is shown for any card that has an Ethernet interface. Valid values are unknown (1), none(2), … |
| 1.3.6.1.4.1.2338.4.1.2.1.1.11 | ColumnvrptrGroupExternalPortCapacity | read-only | mandatory | The rptrGroupExternalPortCapacity is similar to, and typical equal to, rptrGroupPortCapacity. External ports are those which extrude from the front faceplate. … |
| 1.3.6.1.4.1.2338.4.1.3 | NodevrptrPortInfo | |||
| 1.3.6.1.4.1.2338.4.1.3.1 | TablevrptrPortTable | not-accessible | mandatory | Table of descriptive and status information about the repeater ports in the system. The number of entries is independent of the number of repeaters in the mana… |
| 1.3.6.1.4.1.2338.4.1.3.1.1 | RowvrptrPortEntry | not-accessible | mandatory | An entry in the table, containing information about a single port. |
| 1.3.6.1.4.1.2338.4.1.3.1.1.1 | ColumnvrptrPortGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.4.1.2338.4.1.3.1.1.2 | ColumnvrptrPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. This identifies the port independently from the repeater it may be … |
| 1.3.6.1.4.1.2338.4.1.3.1.1.3 | ColumnvrptrPortAdminStatus | read-write | mandatory | Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to resto… |
| 1.3.6.1.4.1.2338.4.1.3.1.1.4 | ColumnvrptrPortAutoPartitionState | read-only | mandatory | The autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The conditions that cause port par… |
| 1.3.6.1.4.1.2338.4.1.3.1.1.5 | ColumnvrptrPortOperStatus | read-only | mandatory | This object indicates the port's operational status. The notPresent(3) status indicates the port is physically removed (note this may or may not be possible de… |
| 1.3.6.1.4.1.2338.4.1.3.1.1.6 | ColumnvrptrPortRptrId | read-only | mandatory | This object identifies the repeater to which this port belongs. The repeater identified by a particular value of this object is the same as that identified by … |
| 1.3.6.1.4.1.2338.4.1.3.1.1.7 | ColumnvrptrPortLinkState | read-only | mandatory | Describes whether there is link on this port or not: link = 1 noLink = 2 |
| 1.3.6.1.4.1.2338.4.1.3.1.1.8 | ColumnvrptrPortSpeed | read-only | mandatory | Specifies the ethernet speed of this particular port. Valid values are : unknown = 1, 10-MBPS =2 (10MB per second), 100-MBPS = 3 (100 MB per second) |
| 1.3.6.1.4.1.2338.4.1.3.1.1.9 | ColumnvrptrPortSpeedSelect | read-only | mandatory | This object indicates the selection used by the port for negotiating the Ethernet speed. If automatic is selected, the highest supported speed will be negotiat… |
| 1.3.6.1.4.1.2338.4.1.3.1.1.10 | ColumnvrptrPortDuplex | read-only | mandatory | This object indicates the duplex of the Ethernet port. Valid values are : unknown = 1, half = 2, full = 3 |
| 1.3.6.1.4.1.2338.4.1.3.1.1.11 | ColumnvrptrPortDuplexSelect | read-only | mandatory | This object indicates the selection used by the port for negotiating the Ethernet duplex. If automatic is selected, the best supported duplex will be negotiate… |
| 1.3.6.1.4.1.2338.4.1.3.1.1.12 | ColumnvrptrPortPolarity | read-only | mandatory | This object indicates the polarity of the Ethernet cable. If the polarity is crossed, the repeater may compensate for it, but it indicates a wiring problem wit… |
| 1.3.6.1.4.1.2338.4.1.4 | NodevrptrAllRptrInfo | |||
| 1.3.6.1.4.1.2338.4.1.4.1 | TablevrptrInfoTable | not-accessible | mandatory | A table of information about each non-trivial repeater. The number of entries depends on the physical configuration of the managed system. |
| 1.3.6.1.4.1.2338.4.1.4.1.1 | RowvrptrInfoEntry | not-accessible | mandatory | An entry in the table, containing information about a single non-trivial repeater. |
| 1.3.6.1.4.1.2338.4.1.4.1.1.1 | ColumnvrptrInfoId | read-only | mandatory | This object identifies the repeater for which this entry contains information. |
| 1.3.6.1.4.1.2338.4.1.4.1.1.2 | ColumnvrptrInfoRptrType | read-only | mandatory | The rptrInfoRptrType returns a value that identifies the CSMA/CD repeater type. The value 5 (tenMbOrOnehundredMb) is a Vertical Network extension specifying 10… |
| 1.3.6.1.4.1.2338.4.1.4.1.1.3 | ColumnvrptrInfoOperStatus | read-only | mandatory | The rptrInfoOperStatus object indicates the operational state of the repeater. |
| 1.3.6.1.4.1.2338.4.1.4.1.1.4 | ColumnvrptrInfoReset | read-write | mandatory | Setting this object to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std] for a 10Mb/s repeater, and to the START state o… |
| 1.3.6.1.4.1.2338.4.1.4.1.1.5 | ColumnvrptrInfoPartitionedPorts | read-only | mandatory | This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rptrPortOperStatus does not have t… |
| 1.3.6.1.4.1.2338.4.1.4.1.1.6 | ColumnvrptrInfoLastChange | read-only | mandatory | The value of sysUpTime when any of the following conditions occurred: 1) agent cold- or warm-started; 2) this instance of repeater was created (such as when a … |
| 1.3.6.1.4.1.2338.4.2 | NodevrptrMonitorPackage | |||
| 1.3.6.1.4.1.2338.4.2.3 | NodevrptrMonitorPortInfo | |||
| 1.3.6.1.4.1.2338.4.2.3.1 | TablevrptrMonitorPortTable | not-accessible | mandatory | Table of performance and error statistics for the ports. The number of entries is the same as that in the rptrPortTable. The columnar object rptrMonitorPortLas… |
| 1.3.6.1.4.1.2338.4.2.3.1.1 | RowvrptrMonitorPortEntry | not-accessible | mandatory | An entry in the table, containing performance and error statistics for a single port. |
| 1.3.6.1.4.1.2338.4.2.3.1.1.1 | ColumnvrptrMonitorPortGroupIndex | read-only | mandatory | This object identifies the group containing the port for which this entry contains information. |
| 1.3.6.1.4.1.2338.4.2.3.1.1.2 | ColumnvrptrMonitorPortIndex | read-only | mandatory | This object identifies the port within the group for which this entry contains information. |
| 1.3.6.1.4.1.2338.4.2.3.1.1.3 | ColumnvrptrMonitorPortReadableFrames | read-only | mandatory | This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on t… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.4 | ColumnvrptrMonitorPortReadableOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame re… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.5 | ColumnvrptrMonitorPortFCSErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deass… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.6 | ColumnvrptrMonitorPortAlignmentErrors | read-only | mandatory | This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserte… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.7 | ColumnvrptrMonitorPortFrameTooLongs | read-only | mandatory | This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If rptrMo… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.8 | ColumnvrptrMonitorPortShortEvents | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 b… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.9 | ColumnvrptrMonitorPortRunts | read-only | mandatory | This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The Activi… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.10 | ColumnvrptrMonitorPortCollisions | read-only | mandatory | For a clause 9 repeater, this counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is asserte… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.11 | ColumnvrptrMonitorPortLateEvents | read-only | mandatory | For a clause 9 repeater port, this counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQ… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.12 | ColumnvrptrMonitorPortVeryLongEvents | read-only | mandatory | For a clause 9 repeater port, this counter is incremented by one for each CarrierEvent whose ActivityDuration is greater than the MAU Jabber Lockup Protection … |
| 1.3.6.1.4.1.2338.4.2.3.1.1.13 | ColumnvrptrMonitorPortDataRateMismatches | read-only | mandatory | This counter is incremented by one for each frame received by this port that meets all of the conditions required by only one of the following two measurement … |
| 1.3.6.1.4.1.2338.4.2.3.1.1.14 | ColumnvrptrMonitorPortAutoPartitions | read-only | mandatory | This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause a clause 9 repeater port to pa… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.15 | ColumnvrptrMonitorPortTotalErrors | read-only | mandatory | The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: v… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.16 | ColumnvrptrMonitorPortLastChange | read-only | mandatory | The value of sysUpTime when the last of the following occurred: 1) the agent cold- or warm-started; 2) the row for the port was created (such as when a device … |
| 1.3.6.1.4.1.2338.4.2.3.1.1.17 | ColumnvrptrMonitorPortSentFrames | read-only | mandatory | This object is the number of frames of valid frame length that have been sent on this port. This counter is incremented by one for each frame sent on this port… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.18 | ColumnvrptrMonitorPortSentOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been sent on this port. This counter is incremented by OctetCount for each frame sent o… |
| 1.3.6.1.4.1.2338.4.2.3.1.1.19 | ColumnvrptrMonitorPortDroppedFrames | read-only | mandatory | This counter is incremented by one for each time the switch had dropped a frame due a buffer full event. A discontinuity may occur in the value when the value … |
| 1.3.6.1.4.1.2338.4.2.3.1.1.20 | ColumnvrptrMonitorPortOtherErrors | read-only | mandatory | This counter is incremented by one for each time the repeater has detected an error which is not reported in any other error counter. The frame may or may not … |
| 1.3.6.1.4.1.2338.4.2.3.2 | TablevrptrMonitor100PortTable | not-accessible | mandatory | Table of additional performance and error statistics for 100Mb/s ports, above and beyond those parameters that apply to both 10 and 100Mbps ports. Entries exis… |
| 1.3.6.1.4.1.2338.4.2.3.2.1 | RowvrptrMonitor100PortEntry | not-accessible | mandatory | An entry in the table, containing performance and error statistics for a single 100Mb/s port. |
| 1.3.6.1.4.1.2338.4.2.3.2.1.1 | ColumnvrptrMonitorPortIsolates | read-only | mandatory | This counter is incremented by one each time that the repeater port automatically isolates as a consequence of false carrier events. The conditions which cause… |
| 1.3.6.1.4.1.2338.4.2.3.2.1.2 | ColumnvrptrMonitorPortSymbolErrors | read-only | mandatory | This counter is incremented by one each time when valid length packet was received at the port and there was at least one occurrence of an invalid data symbol.… |
| 1.3.6.1.4.1.2338.4.2.3.2.1.3 | ColumnvrptrMonitorPortUpper32Octets | read-only | mandatory | This object is the number of octets contained in valid frames that have been received on this port, modulo 2**32. That is, it contains the upper 32 bits of a 6… |
| 1.3.6.1.4.1.2338.4.2.3.2.1.4 | ColumnvrptrMonitorPortUpper32SentOctets | read-only | mandatory | This object is the number of octets contained in valid frames that have been sent on this port, modulo 2**32. That is, it contains the upper 32 bits of a 64-bi… |
| 1.3.6.1.4.1.2338.4.2.4 | NodevrptrMonitorAllRptrInfo | |||
| 1.3.6.1.4.1.2338.4.2.4.1 | TablevrptrMonTable | not-accessible | mandatory | A table of information about each non-trivial repeater. The number of entries in this table is the same as the number of entries in the rptrInfoTable. The colu… |
| 1.3.6.1.4.1.2338.4.2.4.1.1 | RowvrptrMonEntry | not-accessible | mandatory | An entry in the table, containing information about a single non-trivial repeater. |
| 1.3.6.1.4.1.2338.4.2.4.1.1.1 | ColumnvrptrMonTxCollisions | read-only | mandatory | For a clause 9 (10Mb/s) repeater, this counter is incremented every time the repeater state machine enters the TRANSMIT COLLISION state from any state other th… |
| 1.3.6.1.4.1.2338.4.2.4.1.1.3 | ColumnvrptrMonTotalFrames | read-only | mandatory | The number of frames of valid frame length that have been received on the ports in this repeater and for which the FCSError and CollisionEvent signals were not… |
| 1.3.6.1.4.1.2338.4.2.4.1.1.4 | ColumnvrptrMonTotalErrors | read-only | mandatory | The total number of errors which have occurred on all of the ports in this repeater. The errors included in this count are the same as those listed for the rpt… |
| 1.3.6.1.4.1.2338.4.2.4.1.1.5 | ColumnvrptrMonTotalOctets | read-only | mandatory | The total number of octets contained in the valid frames that have been received on the ports in this group. If an implementation can not obtain a count of oct… |
| 1.3.6.1.4.1.2338.4.2.4.2 | TablevrptrMon100Table | not-accessible | mandatory | A table of additional information about each 100Mb/s repeater, augmenting the entries in the rptrMonTable. Entries exist in this table only for 100Mb/s repeate… |
| 1.3.6.1.4.1.2338.4.2.4.2.1 | RowvrptrMon100Entry | not-accessible | mandatory | An entry in the table, containing information about a single 100Mbps repeater. |
| 1.3.6.1.4.1.2338.4.2.4.2.1.1 | ColumnvrptrMonUpper32TotalOctets | read-only | mandatory | The total number of octets contained in the valid frames that have been received on the ports in this repeater, modulo 2**32. That is, it contains the upper 32… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING (SIZE (6)) |