WESTERN-MULTIPLEX-RAD10006-MIB
77 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | ScalarmgmtNMULinkTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'nmuLinkTrap' trap whenever the link condition between Radio and the NMU has a tra… |
| 1.3.6.1.2.2 | ScalarmgmtNMULinkSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.3 | ScalarmgmtT1InputTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 't1InTrap' trap whenever the Radio has a transition of the T1 INPUT condition. The… |
| 1.3.6.1.2.4 | ScalarmgmtT1InputSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.5 | ScalarmgmtT1CodeViolationTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 't1CvTrap' trap whenever the Radio has a transition of the T1 Code Violation condi… |
| 1.3.6.1.2.6 | ScalarmgmtT1CodeViolationSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.7 | ScalarmgmtT1LineDriverTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 't1LoTrap' trap whenever the radio has a transition of the T1 line build out condi… |
| 1.3.6.1.2.8 | ScalarmgmtT1LineDriverSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.9 | ScalarmgmtT1AISTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 't1AisTrap' trap whenever the radio has a transition of its T1 AIS Output conditio… |
| 1.3.6.1.2.10 | ScalarmgmtT1AISSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.11 | ScalarmgmtRadioSyncTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'radioSyncTrap' trap whenever the Radio has a transition of the Frame Loss Alarm. … |
| 1.3.6.1.2.12 | ScalarmgmtRadioSyncSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.13 | ScalarmgmtBitErrorTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'berTrap' trap whenever the Radio has a transition of the Bit Error Rate 6 (or BER… |
| 1.3.6.1.2.14 | ScalarmgmtBitErrorSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.15 | ScalarmgmtFan1TrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'fan1Trap' trap whenever the FAN 1 Unit has a transition of its FAN alarm. The 'fa… |
| 1.3.6.1.2.16 | ScalarmgmtFan1Severity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.17 | ScalarmgmtFan2TrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'fan2Trap' trap whenever the FAN2 Unit has a transition of its FAN alarm. The 'fan… |
| 1.3.6.1.2.18 | ScalarmgmtFan2Severity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.19 | ScalarmgmtRxSynthTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'rxSynthTrap' trap whenever the Radio has a transition of its receiver-sythesizer … |
| 1.3.6.1.2.20 | ScalarmgmtRxSynthSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.21 | ScalarmgmtTxSynthTrapControl | read-write | mandatory | This persistent variable controls whether the Agent will attempt to send the 'txSynthTrap' trap whenever the Radio has a transition of its tansmitter-synthesiz… |
| 1.3.6.1.2.22 | ScalarmgmtTxSynthSeverity | read-write | mandatory | This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular e… |
| 1.3.6.1.2.61 | ScalarmgmtTrapHysteresis | read-write | mandatory | This persistent variable indicates the desired hysteresis time value that allows the trap management sub-system to generate any of the 16 SNMP Western Multiple… |
| 1.3.6.1.4.1.3727 | Nodewestern-multiplex | |||
| 1.3.6.1.4.1.3727.20 | Nodetsunami100-06 | |||
| 1.3.6.1.4.1.3727.20.20 | Noderadio | |||
| 1.3.6.1.4.1.3727.20.20.1 | Nodeconfig | |||
| 1.3.6.1.4.1.3727.20.20.1.1 | ScalarcnfgT1LineCode | read-write | mandatory | This persistent variable contains the current T1 line encoding/decoding method. 'B8ZS' selects the Bipolar With 8-bit Zero Substitution encoding/decoding. 'AMI… |
| 1.3.6.1.4.1.3727.20.20.1.2 | ScalarcnfgT1LineBuildOut | read-write | mandatory | This persistent variable contains the current T1 Line Build Out configuration for the radio. For DSX-1 applications, line lengths from 0 to 655 feet (as measur… |
| 1.3.6.1.4.1.3727.20.20.1.3 | ScalarcnfgT1NearEndRadioLoopback | read-write | mandatory | This non-persistent variable contains the current state of the loopback mode for the radio side of the T1 channel of the radio. 'enabled' reconfigures the T1 d… |
| 1.3.6.1.4.1.3727.20.20.1.4 | ScalarcnfgT1FarEndRadioLoopback | read-write | mandatory | This non-persistent variable contains the current state of the loopback mode for the radio side of the T1 channel of the remote radio. 'enabled' reconfigures t… |
| 1.3.6.1.4.1.3727.20.20.1.5 | ScalarcnfgT1InputAlarm | read-write | mandatory | This non-persistent variable contains the configuration setting of the T1 channel input. It allows the SNMP user to control T1 channel input. 'enabled' enables… |
| 1.3.6.1.4.1.3727.20.20.1.6 | ScalarcnfgAIS | read-write | mandatory | This non-persistent variable contains the configuration setting of the AIS output. It allows the SNMP user to control AIS output. 'enabled' enables the AIS out… |
| 1.3.6.1.4.1.3727.20.20.1.7 | ScalarcnfgOrderwireAddr | read-write | mandatory | This persistent variable contains the current number of the two-digit engineering orderwire (EOW) phone number of the handset connected to the radio. The phone… |
| 1.3.6.1.4.1.3727.20.20.1.8 | ScalarcnfgLinkSecurityCode | read-write | mandatory | This persistent variable contains the current number of the 12-byte security code. It allows the SNMP user to read and set the link security code. The link sec… |
| 1.3.6.1.4.1.3727.20.20.1.9 | ScalarcnfgLearningFilter | read-write | mandatory | This persistent variable configures the learning filter. 'disabled' turns off the learning filter. 'enabled' turns on the learning filter. There is no default … |
| 1.3.6.1.4.1.3727.20.20.1.10 | ScalarcnfgFiberOpticInterface | read-write | mandatory | This persistent variable configures the fiber interface. 'disabled' turns off the fiber interface. 'enabled' turns on the fiber interface. There is no default … |
| 1.3.6.1.4.1.3727.20.20.1.11 | ScalarcnfgEthernetDuplex | read-write | mandatory | This persistent variable contains the current configuration of the ethernet communication mode. 'full-duplex' indicates ethernet communicates in full duplex mo… |
| 1.3.6.1.4.1.3727.20.20.1.12 | ScalarcnfgDataRate | read-only | mandatory | This persistent variable contains the current configuration of the data rate. 'full-duplex-45-MB' indicates 45 MB data rate with full duplex operation. datarat… |
| 1.3.6.1.4.1.3727.20.20.1.13 | ScalarcnfgInterfaceType | read-only | mandatory | This persistent variable contains the current configuration of interface type. 't1-100BaseT' indicates 100BaseT and a T1 channel. 't1-10BaseT' indicates 10Base… |
| 1.3.6.1.4.1.3727.20.20.1.14 | ScalarcnfgIDUSWVersion | read-only | mandatory | This persistent variable contains the current number of the 4-byte IDU software Version. There is no default value for this variable. |
| 1.3.6.1.4.1.3727.20.20.1.15 | ScalarcnfgNMUSWVersion | read-only | mandatory | This persistent variable contains the current number of the 4-byte NMU software Version. There is no default value for this variable. |
| 1.3.6.1.4.1.3727.20.20.2 | Nodestatus | |||
| 1.3.6.1.4.1.3727.20.20.2.1 | NodenmuLinkTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in the link condition between the Radio and the NMU.. This trap may be filter… | ||
| 1.3.6.1.4.1.3727.20.20.2.1 | ScalarstatRadioLogHealth | read-only | mandatory | This non-persistent variable indicates the current health status of the radio, determined by the Network Management Unit, or NMU's system event log. This MIB v… |
| 1.3.6.1.4.1.3727.20.20.2.2 | ScalarstatNMULink | read-only | mandatory | This non-persistent variable contains the current status of the radio to nmu link . This MIB variable can be polled to provide a high-level status of the radio… |
| 1.3.6.1.4.1.3727.20.20.2.2 | Nodet1InTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in Radio, T1 Input condition. This trap may be filtered by 'mgmtT1InputTrapCo… | ||
| 1.3.6.1.4.1.3727.20.20.2.3 | ScalarstatAlarmSummary | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.3 | Nodet1CvTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition Radio's, Code Violation condition. This trap may be filtered by 'mgmtT1CodeVi… | ||
| 1.3.6.1.4.1.3727.20.20.2.4 | Nodet1LoTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in Radio, T1 line build out condition. This trap may be filtered by 'mgmtT1Li… | ||
| 1.3.6.1.4.1.3727.20.20.2.5 | Nodet1AisTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in the Radio's,T1 AIS Output condition. This trap may be filtered by 'mgmtT1A… | ||
| 1.3.6.1.4.1.3727.20.20.2.6 | NoderadioSyncTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in the Radio's, Frame Loss alarm. This trap may be filtered by 'mgmtRadioSync… | ||
| 1.3.6.1.4.1.3727.20.20.2.7 | NodeberTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in the Radio's, Bit Error Rate 6 (or BER6) Alarm. The 6 refers to a bit error… | ||
| 1.3.6.1.4.1.3727.20.20.2.8 | Nodefan1Trap | This trap is generated by the SNMP Agent when the Agent has detected a transition in the fan1 Unit's, alarm. This trap may be filtered by 'mgmtFan1TrapControl'… | ||
| 1.3.6.1.4.1.3727.20.20.2.9 | Nodefan2Trap | This trap is generated by the SNMP Agent when the Agent has detected a transition in the fan2 Unit's, alarm. This trap may be filtered by 'mgmtFan2TrapControl'… | ||
| 1.3.6.1.4.1.3727.20.20.2.10 | NoderxSynthTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in Radio's, receiver-synthesizer alarm condition. This trap may be filtered b… | ||
| 1.3.6.1.4.1.3727.20.20.2.11 | NodetxSynthTrap | This trap is generated by the SNMP Agent when the Agent has detected a transition in Radio's, transmitter-synthesizer alarm condition. This trap may be filtere… | ||
| 1.3.6.1.4.1.3727.20.20.2.21 | ScalarstatT1Input | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.22 | ScalarstatT1CodeViolation | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.23 | ScalarstatT1LineDriver | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.24 | ScalarstatT1AIS | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.25 | ScalarstatRadioSync | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.26 | ScalarstatBitError | read-only | mandatory | This non-persistent variable contains the current status of the radio. This MIB variable can be polled to provide a high-level status of the radio. 'alarm_unkn… |
| 1.3.6.1.4.1.3727.20.20.2.27 | ScalarstatFan1 | read-only | mandatory | This non-persistent variable contains the current status of the radio's . This MIB variable can be polled to provide a high-level status of the radio. 'alarm_u… |
| 1.3.6.1.4.1.3727.20.20.2.28 | ScalarstatFan2 | read-only | mandatory | This non-persistent variable contains the current status of the radio's . This MIB variable can be polled to provide a high-level status of the radio. 'alarm_u… |
| 1.3.6.1.4.1.3727.20.20.2.29 | ScalarstatRxSynth | read-only | mandatory | This non-persistent variable contains the current status of the radio's . This MIB variable can be polled to provide a high-level status of the radio. 'alarm_u… |
| 1.3.6.1.4.1.3727.20.20.2.30 | ScalarstatTxSynth | read-only | mandatory | This non-persistent variable contains the current status of the radio's . This MIB variable can be polled to provide a high-level status of the radio. 'alarm_u… |
| 1.3.6.1.4.1.3727.20.20.3 | Nodemgmt | |||
| 1.3.6.1.4.1.3727.20.20.4 | Nodeperf | |||
| 1.3.6.1.4.1.3727.20.20.4.1 | ScalarperfCurrentBER | read-only | mandatory | This variable. 'perfCurrentBER' contains a calculation of the estimated bit error rate of the aggregate data channel, after FEC decoding. |
| 1.3.6.1.4.1.3727.20.20.4.2 | ScalarperfCurrentRSL | read-only | mandatory | This variable, 'perfCurrentRSL' contains the current received signal level, measured in dBm. The received signal level, or RSL, is measured in the Receiver Uni… |
| 1.3.6.1.4.1.3727.20.20.4.3 | ScalarperfErrorSeconds | read-only | mandatory | This variable. 'perfErrorSeconds' contains a count of the number of one second periods with one or more bit errors. |
| 1.3.6.1.4.1.3727.20.20.4.4 | ScalarperfSeverelyErroredSeconds | read-only | mandatory | This variable. 'perfSeverelyErroredSeconds' contains a count of the number of one second periods with an error rate greater than 10^-6 for the entire one secon… |
| 1.3.6.1.4.1.3727.20.20.4.5 | ScalarperfMinRSL | read-only | mandatory | This variable,'perfMinRSL' contains the lowest received signal level within the measuring period. The received signal level, or RSL, is measured in dBm, in the… |
| 1.3.6.1.4.1.3727.20.20.4.6 | ScalarperfMaxRSL | read-only | mandatory | This variable, 'perfMaxRSL' contains the highest received signal level within the measuring period. The received signal level, or RSL, is measured in dBm, in t… |
| 1.3.6.1.4.1.3727.20.20.4.7 | ScalarperfElapsedSecondsSinceReset | read-only | mandatory | This variable, 'perfElapsedSecondsSinceReset' contains a value which corresponds to the total number of seconds has elapsed since the start of the performance … |
| 1.3.6.1.4.1.3727.20.20.4.8 | ScalarperfHistoryReset | read-write | mandatory | This variable, 'perfHistoryReset' is a command to clear all the counters in the performance table. Setting this variable to 'history-reset' will cause all the … |