XF-RADIOLINK-PTP-RADIO-MIB
217 objects
This MIB defines objects for point-to-point Radio Link RAUs.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| XF-RADIOLINK-PTP-TERMINAL-MIB | xfTermRowIndex |
| XF-TOP-MIB | xfRadioLink |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.81.3.4.3 | IdentityxfRadioLinkPtpRadioMIB | This MIB defines objects for point-to-point Radio Link RAUs. | ||
| 1.3.6.1.4.1.193.81.3.4.3.1 | NodexfRadioLinkPtpRadioObjects | |||
| 1.3.6.1.4.1.193.81.3.4.3.1.1 | TablexfRAUTable | not-accessible | current | Table for Radiolink point-to-point radios managed objects. Table indexed with entPhysicalIndex. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1 | RowxfRAUEntry | not-accessible | current | An entry in xfRadioTable. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.1 | ColumnxfRAUAlarmStatus | read-only | current | This object shows the alarm status of the radio unit. atpcCability - The terminal is configured for ATPC, but the radio does not support ATPC. This alarm is ac… |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.2 | ColumnxfRAURfLoopAvailable | read-only | current | This object inidicates if RF loop is available in radio unit. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.3 | ColumnxfRAUAtpcCapability | read-only | current | This object indicates if the radio unit supports ATPC or not. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.4 | ColumnxfRAULocalCtrlCapability | read-only | current | This object indicates if the radio unit supports local transmit power control or not. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.5 | ColumnxfRAUModCapability | read-only | current | This object shows the modulation methods supported by the radio unit. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.6 | ColumnxfRAUFrequencyband | read-only | current | This object shows the frequency band for the radio unit. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.7 | ColumnxfRAUSubBand | read-write | current | This object shows the sub band (Index) for the radio unit. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.8 | ColumnxfRAUTemperature | read-only | current | This object shows the temperature, in degree Celsius, inside the radio unit. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.9 | ColumnxfRAUProtectionPath | read-only | current | This object indicates what radio path the radio belongs to. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.10 | ColumnxfRAURxCapability | read-only | current | This object indicates if the radio unit support RX configuration. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.11 | ColumnxfRAUNotes | read-write | current | You can add information in this description field, for example polarization, antenna type or logging a site visit. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.12 | ColumnxfRauAtpcVersion | read-only | current | This object represents the RAU ATPC version. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.13 | ColumnxfRauBoosterCapability | read-only | current | This object represents the Booster capability for a link. |
| 1.3.6.1.4.1.193.81.3.4.3.1.1.1.14 | ColumnxfRauBoosterSelectedIndex | read-write | current | This object represents the Booster selected index for a link. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2 | TablexfRFIFTable | not-accessible | current | Table for Radiolink point-to-point radios RF IF managed objects. Table indexed with ifIndex. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1 | RowxfRFIFEntry | not-accessible | current | An entry in the xfRFIFTable. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.1 | ColumnxfRFBaseTxFrequency | read-only | current | This object shows the Tx frequency in KHz when frequency step number is 0. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.2 | ColumnxfRFBaseRxFrequency | read-only | current | This object shows the Rx frequency in KHz when frequency. step number is 0 |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.3 | ColumnxfRFStepSize | read-only | current | This object shows the frequency step size in KHz. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.4 | ColumnxfRFStepLimitLow | read-only | current | This object shows the lowest allowed frequency step number. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.5 | ColumnxfRFStepLimitHigh | read-only | current | This object shows the highest allowed frequency step number. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.6 | ColumnxfRFCurrentStepNumber | read-write | current | This object sets/shows the frequency step number. 0 = frequency not yet defined. For Classic RAUs, TX and RX frequencies can not be set individually. The span … |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.7 | ColumnxfRFTxOperStatus | read-only | current | This object shows the operational status of the transmitter. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.8 | ColumnxfRFTxAdminStatus | read-write | current | This object sets the desired status of the transmitter. Value other(1) not settable. Especially for far end: txOff(2), requests far end transmitter to be turne… |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.9 | ColumnxfRFLoopEnable | read-write | current | This object manage RF loop. Default value: disable(3). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.10 | ColumnxfRFAlarms | read-only | current | This TC enumerates the alarms for RF interface. txFrequency - Transmitter frequency synthesizer loop is unlocked. rxFrequency - Receiver frequency synthesizer … |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.11 | ColumnxfRFStatus | read-only | current | This object shows the RAU status. rfLoop - Warns if RF-loop is enabled on RAU txOff - Warns if TX is manually set to off |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.12 | ColumnxfRFStepSizeRx | read-only | current | This object shows the Rx frequency step size in KHz. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.13 | ColumnxfRFStepLimitLowRx | read-only | current | This object shows the Rx lowest allowed frequency step number. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.14 | ColumnxfRFStepLimitHighRx | read-only | current | This object shows the Rx highest allowed frequency step number. |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.15 | ColumnxfRFCurrentStepNumberRx | read-write | current | This object sets/shows the RX frequency step number for Agile RAUs. 0 = frequency not yet defined. - To calculate step number for RX, use the following formula… |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.16 | ColumnxfRFDuplexType | read-only | current | This object tells the duplex frequency mode for the RAU: - fixed: Tx frequency only can be set by operator, Rx frequency is automatically set on the basis of (… |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.17 | ColumnxfRFDuplexConfig | read-write | current | This object enables setting of duplex frequency for the RAU. It is always disabled(3) and can not be overwritten if xfRFDuplexType = fixed(2). |
| 1.3.6.1.4.1.193.81.3.4.3.1.2.1.18 | ColumnxfRFDuplexDistance | read-write | current | This object is aimed to select the duplex distance for the RAU. It can only be set if xfRFDuplexConfig = enabled(2), so that: xfRFDuplexDistance = Tx Frequency… |
| 1.3.6.1.4.1.193.81.3.4.3.1.3 | TablexfRFPowerTable | not-accessible | current | Table for Radiolink point-to-point radios managed objects. Table indexed with ifIndex. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1 | RowxfRFPowerEntry | not-accessible | current | An entry in the xfRFPowerTable. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.1 | ColumnxfRFCurrentOutputPower | read-only | current | This object shows the output power in dBm including attenuator. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.2 | ColumnxfRFRtpcMinOutputPower | read-only | current | This object shows the minimum output power in dBm including attenuator. Value -100 indicate that RAU Tx on is not possible due to power supply limitations. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.3 | ColumnxfRFRtpcMaxOutputPower | read-only | current | This object shows the maximum output power in dBm including attenuator. Value -100 indicate that RAU Tx on is not possible due to power supply limitations. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.4 | ColumnxfRFRtpcSelectedOutputPower | read-write | current | This object set/shows the selected output power in dBm including attenuator. Value 254 indicates that the selected power is set to maximum. Default value: 254 |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.5 | ColumnxfRFAtpcMinOutputPower | read-only | current | This object shows the minimum output power in dBm in ATPC. mode for radio contained in the radio terminal. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.6 | ColumnxfRFAtpcMaxOutputPower | read-write | current | This object sets/shows the ATPC maximum output power in dBm for radio contained in the radio terminal. Value 254 indicates that the power is set to maximum. De… |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.7 | ColumnxfRFAtpcMinInputPowerFar | read-only | current | This object shows the ATPC minimum input target power level for far end radio. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.8 | ColumnxfRFAtpcSelectedInputPowerFar | read-write | current | This object sets/shows the ATPC selected input target level for far end radio. Default value: -30. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.9 | ColumnxfRFAttenuator | read-write | current | This object sets/shows the value in dBm for fixed attenuator mounted in antenna. Default value: 0. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.10 | ColumnxfRFCurrentInputPower | read-only | current | This object shows RF input level = value/10 dBm. Domain: [-20.0 .. -99.9 dBm]. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.11 | ColumnxfRFMaxInputPowerLast7Days | read-only | current | This object shows maximum RF input level last 7 days. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm]. 0 (zero) indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.12 | ColumnxfRFMinInputPowerLast7Days | read-only | current | This object shows minimum RF input level last 7 days. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm]. 0 (zero) indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.13 | ColumnxfRFMaxInputPowerSinceReset | read-only | current | This object shows maximum RF input level since reset. RF input level = value/10 dBm. Domain: [-20.0 .. -99.9 dBm]. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.14 | ColumnxfRFMinInputPowerSinceReset | read-only | current | This object shows minimum RF input level since reset. RF input level = value/10 dBm. Domain: [-20.0 .. -99.9 dBm]. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.15 | ColumnxfRFInputPowerReset | read-write | current | This object reset the registers for the RF input level and All Time High level this seven days period and counters for the next seven days period of time Note.… |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.16 | ColumnxfRFInputAlarmThreshold | read-write | current | This object shows RF input level threshold. Default value: -93. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.17 | ColumnxfRFOutputPower4QAM | read-only | current | Output power for 4QAM. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.18 | ColumnxfRFOutputPower8QAM | read-only | current | Output power for 8QAM. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.19 | ColumnxfRFOutputPower16QAM | read-only | current | Output power for 16QAM. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.20 | ColumnxfRFOutputPower32QAM | read-only | current | Output power for 32QAM. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.21 | ColumnxfRFOutputPower64QAM | read-only | current | Output power for 64QAM. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.22 | ColumnxfRFOutputPower128QAM | read-only | current | Output power for 128QAM. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.23 | ColumnxfRFOutputPower256QAM | read-only | current | Output power for 256QAM. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.24 | ColumnxfRFOutputPower512QAM | read-only | current | Output power for 512QAM. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.25 | ColumnxfRFAtpcFallbackOutputPower | read-write | current | This object sets maximum output power in dBm in ATPCFallback mode for radio contained in the radio terminal. Value = 254 indicates that the power is set to max… |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.26 | ColumnxfRFAtpcFallbackEnable | read-write | current | Enable/disable ATPCFallback. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.27 | ColumnxfRFAtpcFallbackTimer | read-write | current | ATPC Fallback Timer specifies how long the output power can be at PATPC, MAX before ATPC fallback is triggered Default value: 15 min |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.28 | ColumnxfRFOutputPower1024QAM | read-only | current | Output power for 1024QAM. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.29 | ColumnxfRFMaxOutputPowerNotLimited | read-only | current | Max output power in dBm including attenuator that the RAU can give if it is not power supply limited. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.30 | ColumnxfRFMaxOutputPowerNotPossible | read-only | current | unknown(0) isPossible(1) Max output power is possible due to power supply limitations isNotPossible(2) Max output power is not possible due to power supply lim… |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.31 | ColumnxfRFCurrentInputPowerSdcMain | read-only | current | This object shows RF input level for SDC Main path = value/10 dBm. Domain: [-20.0 .. -99.9 dBm]. 0 (zero) indicates invalid value (e.g. SDC not available). |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.32 | ColumnxfRFCurrentInputPowerSdcDiv | read-only | current | This object shows RF input level for SDC Diversity path = value/10 dBm. Domain: [-20.0 .. -99.9 dBm]. 0 (zero) indicates invalid value (e.g. SDC not available). |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.33 | ColumnxfRFMeanInputPower1m | read-only | current | This object shows RF input mean level for last minute. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.34 | ColumnxfRFMaxOutputPowerLast7Days | read-only | current | This object shows maximum RF output level last 7 days. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.35 | ColumnxfRFMinOutputPowerLast7Days | read-only | current | This object shows minimum RF output level last 7 days. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.36 | ColumnxfRFMaxOutputPowerSinceReset | read-only | current | This object shows maximum RF output level since reset RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.37 | ColumnxfRFMinOutputPowerSinceReset | read-only | current | This object shows minimum RF output level since reset RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.38 | ColumnxfRFMaxMSELast7Days | read-only | current | Indicate Max MSE level last 7 days. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.39 | ColumnxfRFMinMSELast7Days | read-only | current | Indicate Min MSE level last 7 days. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.40 | ColumnxfRFMaxXPILast7Days | read-only | current | Indicate Max Cross-Polar Interference (XPI) level last 7 days. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.41 | ColumnxfRFMinXPILast7Days | read-only | current | Indicate Min Cross-Polar Interference (XPI) level last 7 days. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.42 | ColumnxfRFOutputPowerReset | read-write | current | This object reset the registers for the RF output level and All Time High level this seven days period and counters for the next seven days period of time. |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.43 | ColumnxfRFBoosterGain | read-only | current | Value of the Gain of the Booster |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.44 | ColumnxfRFBoosterMaxInputPower | read-only | current | Value of the Max Input Power admitted towards the Booster |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.45 | ColumnxfRFBoosterCapability | read-only | current | Value of Booster capability according to the system |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.46 | ColumnxfRFBoosterProductNumber | read-write | current | Product Number of the Booster connected to the specific RF IF |
| 1.3.6.1.4.1.193.81.3.4.3.1.3.1.47 | ColumnxfRFBoosterHWRevision | read-write | current | HW Revision of the Booster connected to the specific RF IF |
| 1.3.6.1.4.1.193.81.3.4.3.1.4 | TablexfRAUCapabilityTable | not-accessible | current | Table for RAU capability information. Table indexed with entPhysicalIndex and xfTermRowIndex. |
| 1.3.6.1.4.1.193.81.3.4.3.1.4.1 | RowxfRAUCapabilityEntry | not-accessible | current | An entry in xfRAUCapabilityTable. |
| 1.3.6.1.4.1.193.81.3.4.3.1.4.1.1 | ColumnxfRAUChannelSpacing | read-only | current | Channel spacing. ETSI: 3.5, 7, 14, 28, 40, 56 MHz ANSI: 10, 20, 30, 40, 50 MHz |
| 1.3.6.1.4.1.193.81.3.4.3.1.4.1.2 | ColumnxfRAUChannelModulation | read-only | current | This object shows the modulation. Values: cqpsk(2) CQPSK qam16(3) 16-QAM qam128(4) 128-QAM qam32(5) 32-QAM qam64(6) 64-QAM qam4(7) 4-QAM qam8(8) 8-QAM qam256(9… |
| 1.3.6.1.4.1.193.81.3.4.3.1.4.1.3 | ColumnxfRAUSpectrumEfficiencyClass | read-only | current | Spectrum Efficiency Class: other(1), unknown sec2(2), Spectrum eff. Class 2 sec3(3), Spectrum eff. Class 3 sec4L(4), Spectrum eff. Class 4L sec4H(5), Specturm … |
| 1.3.6.1.4.1.193.81.3.4.3.1.4.1.4 | ColumnxfRAUCarrierMode | read-only | current | Radio carrier mode. |
| 1.3.6.1.4.1.193.81.3.4.3.1.5 | TablexfRAUSubBandTable | not-accessible | current | Table for RAU Sub-Band index capability. Table indexed with entPhysicalIndex and xfRAUSubBandIndex. |
| 1.3.6.1.4.1.193.81.3.4.3.1.5.1 | RowxfRAUSubBandEntry | not-accessible | current | An entry in xfRAUSubBandTable. |
| 1.3.6.1.4.1.193.81.3.4.3.1.5.1.1 | ColumnxfRAUSubBandIndex | read-only | current | An index for the specific RAU Sub-Band available index range. |
| 1.3.6.1.4.1.193.81.3.4.3.1.5.1.2 | ColumnxfRAUSubBandRange | read-only | current | This object shows the RAU Sub-Band available index range [0..255]. |
| 1.3.6.1.4.1.193.81.3.4.3.1.6 | TablexfRFSpectrumDiagTable | not-accessible | current | Table for RF Spectrum Diagnostics control and status |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1 | RowxfRFSpectrumDiagEntry | not-accessible | current | An entry in xfRFSpectrumDiagTable |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.1 | ColumnxfRFSpectrumDiagAdminStatus | read-write | current | RF Spectrum Diagnostics Admin Status |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.2 | ColumnxfRFSpectrumDiagOperStatus | read-only | current | RF Spectrum Diagnostics Oper Status |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.3 | ColumnxfRFSpectrumDiagChannelScanEstTime | read-only | current | Estimated time in seconds for scanning one Channel Spacing at current RX frequency |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.4 | ColumnxfRFSpectrumDiagSubBandScanEstTime | read-only | current | Estimated time in seconds for scanning full Sub Band of connected RAU |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.5 | ColumnxfRFSpectrumDiagScanDate | read-only | current | Date and time when scan (channel or sub-band) is completed, format: [YYYY]-[MM]-[DD]T[hh]:[mm]:[ss] |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.6 | ColumnxfRFSpectrumDiagChannelSpacing | read-only | current | Channel width measured by Spectrum Diagnostics |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.7 | ColumnxfRFSpectrumDiagCurrRxFrequency | read-only | current | Current value of Rx frequency |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.8 | ColumnxfRFSpectrumDiagMinRxFrequency | read-only | current | Minimum sub-band Rx frequency (RAU lower edge) |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.9 | ColumnxfRFSpectrumDiagMaxRxFrequency | read-only | current | Maximum sub-band Rx frequency (RAU upper edge) |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.10 | ColumnxfRFSpectrumDiagIdxCompanion1 | read-only | current | RF IF index for 1st companion carrier (0 if no companion) |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.11 | ColumnxfRFSpectrumDiagIdxCompanion2 | read-only | current | RF IF index for 2nd companion carrier (0 if no companion) |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.12 | ColumnxfRFSpectrumDiagIdxCompanion3 | read-only | current | RF IF index for 3rd companion carrier (0 if no companion) |
| 1.3.6.1.4.1.193.81.3.4.3.1.6.1.13 | ColumnxfRFSpectrumDiagProgress | read-only | current | Completed percentage of Spectrum Diagnostics scan |
| 1.3.6.1.4.1.193.81.3.4.3.1.7 | TablexfRFSpectrumDiagResultTable | not-accessible | current | Table of Spectrum Diagnostics scan results |
| 1.3.6.1.4.1.193.81.3.4.3.1.7.1 | RowxfRFSpectrumDiagResultEntry | not-accessible | current | An entry in xfRFSpectrumDiagResultTable |
| 1.3.6.1.4.1.193.81.3.4.3.1.7.1.1 | ColumnxfRFSpectrumDiagResultIndex | read-only | current | Spectrum Diagnostics Scan Result Index |
| 1.3.6.1.4.1.193.81.3.4.3.1.7.1.2 | ColumnxfRFSpectrumDiagResultRxFrequency | read-only | current | Spectrum Diagnostics Scan Result Rx frequency in kHz |
| 1.3.6.1.4.1.193.81.3.4.3.1.7.1.3 | ColumnxfRFSpectrumDiagResultRxPower | read-only | current | Spectrum Diagnostics Scan Result Rx Power value/10 dBm Domain: [-99.9 .. -20.0 dBm] |
| 1.3.6.1.4.1.193.81.3.4.3.1.8 | TablexfRfIfPowerTable | not-accessible | current | Table for Radio Link RAU managed objects. Table indexed with ifIndex. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1 | RowxfRfIfPowerEntry | not-accessible | current | An entry in the xfRfIfPowerTable. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.1 | ColumnxfRfSelectedMinOutputPower | read-write | current | Minimum output power in dBm (selected by operator). Default value: 10 dBm. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.2 | ColumnxfRfSelectedMaxOutputPower | read-write | current | Maximum output power in dBm (selected by operator). Default value: 10 dBm. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.3 | ColumnxfRfCurrentOutputPower | read-only | current | Current output power in dBm. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.4 | ColumnxfRfMinOutputPower | read-only | current | Minimum output power in dBm (provided by RAU). 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.5 | ColumnxfRfMaxOutputPower | read-only | current | Maximum output power in dBm (provided by RAU). 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.6 | ColumnxfRfAtpcTargetInputPowerFE | read-write | current | ATPC target input power on Far End side. Default value: -30. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.7 | ColumnxfRfCurrentInputPower | read-only | current | RF input level. Value is in 1/10 dBm. Domain: [-20.0 .. -99.9 dBm]. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.8 | ColumnxfRfMaxInputPowerLast7Days | read-only | current | Maximum RF input level in the last 7 days. Value is in 1/10 dBm. Domain: [-99.9 ... -20.0 dBm]. 0 (zero) indicates an invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.9 | ColumnxfRfMinInputPowerLast7Days | read-only | current | Minimum RF input level in the last 7 days. Value is in 1/10 dBm. Domain: [-99.9 ... -20.0 dBm]. 0 (zero) indicates an invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.10 | ColumnxfRfMaxInputPowerSinceReset | read-only | current | Maximum RF input level since reset. Value is in 1/10 dBm. Domain: [-99.9 ... -20.0 dBm]. 0 (zero) indicates an invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.11 | ColumnxfRfMinInputPowerSinceReset | read-only | current | Minimum RF input level since reset. Value is in 1/10 dBm. Domain: [-99.9 ... -20.0 dBm]. 0 (zero) indicates an invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.12 | ColumnxfRfInputPowerReset | read-write | current | This object resets the registers for: - RF input power levels - input levels (i.e. RF power, MSE and XPI) in the next 7 days period of time. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.13 | ColumnxfRfInputAlarmThreshold | read-write | current | RF input level threshold. Default value: -93. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.14 | ColumnxfRfOutputPower4QAM | read-only | current | Output power for 4QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.15 | ColumnxfRfOutputPower16QAM | read-only | current | Output power for 16QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.16 | ColumnxfRfOutputPower32QAM | read-only | current | Output power for 32QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.17 | ColumnxfRfOutputPower64QAM | read-only | current | Output power for 64QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.18 | ColumnxfRfOutputPower128QAM | read-only | current | Output power for 128QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.19 | ColumnxfRfOutputPower256QAM | read-only | current | Output power for 256QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.20 | ColumnxfRfOutputPower512QAM | read-only | current | Output power for 512QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.21 | ColumnxfRfOutputPower1024QAM | read-only | current | Output power for 1024QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.22 | ColumnxfRfOutputPower2048QAM | read-only | current | Output power for 2048QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.23 | ColumnxfRfOutputPower4096QAM | read-only | current | Output power for 4096QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.24 | ColumnxfRfMaxOutputPowerNotLimited | read-only | current | Max output power in dBm that the RAU can give if it is not power supply limited. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.25 | ColumnxfRfMaxOutputPowerPossible | read-only | current | possible(2): max output power is possible. notPossible(3): max output power is not possible, due to power supply limitations. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.26 | ColumnxfRfMeanInputPower1m | read-only | current | This object shows RF input mean level for last minute. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.27 | ColumnxfRfMaxOutputPowerLast7Days | read-only | current | This object shows maximum RF output level last 7 days. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.28 | ColumnxfRfMinOutputPowerLast7Days | read-only | current | This object shows minimum RF output level last 7 days. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.29 | ColumnxfRfMaxOutputPowerSinceReset | read-only | current | This object shows maximum RF output level since reset RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.30 | ColumnxfRfMinOutputPowerSinceReset | read-only | current | This object shows minimum RF output level since reset RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.31 | ColumnxfRfOutputPowerReset | read-write | current | This object reset the registers for the RF output level and All Time High level this seven days period and counters for the next seven days period of time. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.32 | ColumnxfRfAvailableOutputPowerType | read-only | current | This object reports the output power capability of the RAU: - standardPower - highPower |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.33 | ColumnxfRfSelectedOutputPowerType | read-write | current | This object allows setting the output power type: - standardPower - highPower default: standardPower(2) When the type is set to highPower(3) a HP license key i… |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.34 | ColumnxfRfTaps | read-write | current | This object allows setting the Traffic Aware Power Saving. Default: disabled(3) |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.35 | ColumnxfRfCurrentInputPowerSdcMain | read-only | current | This object shows RF input level for SDC Main path = value/10 dBm. Domain: [-20.0 .. -99.9 dBm]. 0 (zero) indicates invalid value (e.g. SDC not available). |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.36 | ColumnxfRfCurrentInputPowerSdcDiv | read-only | current | This object shows RF input level for SDC Diversity path = value/10 dBm. Domain: [-20.0 .. -99.9 dBm]. 0 (zero) indicates invalid value (e.g. SDC not available). |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.37 | ColumnxfRfOutputPower8192QAM | read-only | current | Output power for 8192QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.38 | ColumnxfRfOutputPower16384QAM | read-only | current | Output power for 16384QAM. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.39 | ColumnxfRfAtpcFallbackOutputPower | read-write | current | This object sets output power (in dBm) in ATPCFallback mode, for radio contained in the Carrier Termination. 255 indicates invalid value. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.40 | ColumnxfRfAtpcFallbackEnable | read-write | current | Enable/disable ATPCFallback. |
| 1.3.6.1.4.1.193.81.3.4.3.1.8.1.41 | ColumnxfRfAtpcFallbackTimer | read-write | current | This object specifies how long the output power can be at (ATPC, MAX) before ATPC fallback is triggered. Default value: ETSI 15 min, ANSI 5 min. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9 | TablexfRFIFCableMonitoringTable | not-accessible | current | Table for Radiolink point-to-point radios RF IF Cable Monitoring managed objects. Table indexed with ifIndex. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1 | RowxfRFIFCableMonitoringEntry | not-accessible | current | An entry in the xfRFIFCableMonitoringTable. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.1 | ColumnxfRFIFCMStatus | read-write | current | This object manage IfCable Monitoring Status. Default value: disable(2). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.2 | ColumnxfRFOutlierAgc | read-write | current | This object manage IfCable Outlier Alarm. Default value: disable(2). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.3 | ColumnxfRFOutlierSetTh | read-write | current | This object handles Set Threshold for Outlier Alarm. 3 = Default value (0.3). - To calculate threshold use the following formula: SetTh/10. Default value: 3 Ne… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.4 | ColumnxfRFOutlierCeaseTh | read-write | current | This object handles Cease Threshold for Outlier Alarm. 2 = Default value (0.2). - To calculate threshold use the following formula: SetTh/10. Default value: 2 … |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.5 | ColumnxfRFRangeAgc | read-write | current | This object manage IfCable Range Alarm. Default value: disable(2). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.6 | ColumnxfRFRangeSetTh | read-write | current | This object handles Set Threshold for Range Alarm. 30 = Default value (3). - To calculate threshold use the following formula: SetTh/10. Default value: 30 (dB/… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.7 | ColumnxfRFRangeCeaseTh | read-write | current | This object handles Cease Threshold for Range Alarm. 20 = Default value (2). - To calculate threshold use the following formula: SetTh/10. Default value: 20 (d… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.8 | ColumnxfRFStddevAgc | read-write | current | This object manage IfCable Stddev Alarm. Default value: disable(2). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.9 | ColumnxfRFStddevSetTh | read-write | current | This object handles Set Threshold for Stddev Alarm. 50 = Default value (5). - To calculate threshold use the following formula: SetTh/10. Default value: 50 (dB… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.10 | ColumnxfRFStddevCeaseTh | read-write | current | This object handles Cease Threshold for Stddev Alarm. 20 = Default value (2). - To calculate threshold use the following formula: SetTh/10. Default value: 20 (… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.11 | ColumnxfRFDegradationAgc | read-write | current | This object manage IfCable Degradation Alarm. Default value: disable(2). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.12 | ColumnxfRFDegradationSetTh | read-write | current | This object handles Set Threshold for Degradation Alarm. 2 = Default value (0.2). - To calculate threshold use the following formula: SetTh/10. Default value: … |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.13 | ColumnxfRFDegradationCeaseTh | read-write | current | This object handles Cease Threshold for Degradation Alarm. 1 = Default value (0.1). - To calculate threshold use the following formula: SetTh/10. Default value… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.14 | ColumnxfRFMarginAgc | read-write | current | This object manage IfCable Margin Alarm. Default value: disable(2). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.15 | ColumnxfRFMarginSetTh | read-write | current | This object handles Set Threshold for Margin Alarm. 30 = Default value (3). - To calculate threshold use the following formula: SetTh/10. Default value: 30 (dB… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.16 | ColumnxfRFMarginCeaseTh | read-write | current | This object handles Cease Threshold for Margin Alarm. 60 = Default value (6). - To calculate threshold use the following formula: SetTh/10. Default value: 60 (… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.17 | ColumnxfRFOutlierValue | read-only | current | This object handles the value calculated on 24h for Outlier Alarm. 0 = Default value (0). - To calculate value use the following formula: Value/100. Default va… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.18 | ColumnxfRFRangeValue | read-only | current | This object handles the value calculated on 24h for Range Alarm. 0 = Default value (0). - To calculate value use the following formula: Value/100. Default valu… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.19 | ColumnxfRFStddevValue | read-only | current | This object handles the value calculated on 24h for Stddev Alarm. 0 = Default value (0). - To calculate value use the following formula: Value/100. Default val… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.20 | ColumnxfRFDegradationValue | read-only | current | This object handles the value calculated on 24h for Degradation Alarm. 0 = Default value (0). - To calculate value use the following formula: Value/100. Defaul… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.21 | ColumnxfRFMarginValue | read-only | current | This object handles the value calculated on 24h for Margin Alarm. 0 = Default value (0). - To calculate value use the following formula: Value/100. Default val… |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.22 | ColumnxfRFOutlierTrigger | read-only | current | This object manage IfCable Outlier Trigger. Default value: noSetThreshold(2). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.23 | ColumnxfRFRangeTrigger | read-only | current | This object manage IfCable Range Trigger. Default value: noSetThreshold(2). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.24 | ColumnxfRFStddevTrigger | read-only | current | This object manage IfCable Stddev Trigger. Default value: noSetThreshold(2). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.25 | ColumnxfRFDegradationTrigger | read-only | current | This object manage IfCable Degradation Trigger. Default value: noSetThreshold(2). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.9.1.26 | ColumnxfRFMarginTrigger | read-only | current | This object manage IfCable Margin Trigger. Default value: noSetThreshold(2). Near end access: read-write. Far end access: no access. |
| 1.3.6.1.4.1.193.81.3.4.3.1.10 | TablexfSdcTable | not-accessible | current | Table for SDC capabilities, setting and status. |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1 | RowxfSdcEntry | not-accessible | current | An entry in the xfSdcTable. |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1.1 | ColumnxfSdcCapability | read-only | current | SDC capability, including both MMU and ODU. |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1.2 | ColumnxfSdcAdminStatus | read-write | current | SDC Admin Status. |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1.3 | ColumnxfSdcOperStatus | read-only | current | SDC Oper Status. |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1.4 | ColumnxfSdcDadeControl | read-write | current | SDC DADE procedure control. |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1.5 | ColumnxfSdcDadeStatus | read-only | current | SDC DADE procedure status. |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1.6 | ColumnxfSdcPath | read-write | current | SDC selected path (desired value). |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1.7 | ColumnxfSdcOduDateTimeCalibration | read-only | current | Date and time of the SDC DADE calibration for the ODU with serial number in xfSdcOduSerialNumber. Format: [YYYY]-[MM]-[DD]T[hh]:[mm]:[ss] (ISO 8601). |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1.8 | ColumnxfSdcOduSerialNumber | read-only | current | Serial number of the ODU the current value of xfSdcOduDateTimeCalibration is referred to. |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1.9 | ColumnxfSdcGain | read-only | current | SDC gain in dB/10. Domain: [0.0 .. 3.0 dB]. |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1.10 | ColumnxfSdcActualPath | read-only | current | SDC actual path (current value). |
| 1.3.6.1.4.1.193.81.3.4.3.1.10.1.11 | ColumnxfSdcDadeDelay | read-only | current | DADE delay in nsec. |
| 1.3.6.1.4.1.193.81.3.4.3.2 | NodexfRadioLinkPtpRadioConformance | |||
| 1.3.6.1.4.1.193.81.3.4.3.2.1 | NodexfRadioLinkPtpRadioCompliances | |||
| 1.3.6.1.4.1.193.81.3.4.3.2.1.1 | CompliancexfRADIOLINKPTPRADIOFullCompliance | current | The compliance statement for SNMP entities which implement everything. | |
| 1.3.6.1.4.1.193.81.3.4.3.2.2 | NodexfRadioLinkPtpRadioGroups | |||
| 1.3.6.1.4.1.193.81.3.4.3.2.2.1 | GroupxfRadioLinkPtpRadioCompleteGroup | current | A collection of all current objects in this MIB module. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ATPCFallbackEnable | INTEGER { other(1), disable(2), enable(3) } | current | ATPC fallback enable status. |
| BoosterCapability | INTEGER { other(1), noBoosterSupport(2), boosterSupport(3) } | current | Booster capabilities values codes. |
| RAUAtpcCapability | INTEGER { other(1), noAtpcSupport(2), doesNotExist(3), atpcCapabilityUnknown(4), supportsAtpc(5) } | current | This TC enumerates the ATPC capability. |
| RAUChannelSpacingCapability | INTEGER { chspUnknown(0), chsp7MHz(1), chsp14MHz(2), chsp20MHz(3), chsp28MHz(4), chsp30MHz(5), chsp40MHz(6), chsp50MHz(7), chsp56MHz(8), chsp10MHz(9), chsp3500KHz(10), chsp60MHz(11) } | current | Channel spacing capability. |
| RAUModCapability | BITS { cqpsk(0), qam16(1), qam128(2), qam32(3), qam64(4) } | current | This TC enumerates the modulation capabilities. Modulation capabilities is indicated by 5 bits: bits 01234 00000 undetermined 00001 C-QPSK 00010 16-QAM 00011 C-QPSK & 16-QAM 00100 128-QAM 01000 32-QAM 10000 64-QAM ... 1… |
| RAUModulation | INTEGER { other(1), cqpsk(2), qam16(3), qam128(4), qam32(5), qam64(6), qam4(7), qam8(8), qam256(9), qam512(10), qam1024(11) } | current | Type of modulation. |
| RAURfLoopAvailable | INTEGER { other(1), rfLoopAvailable(2), rfLoopNotAvailable(3) } | current | This TC enumerates the RF loop. |
| RauSec | INTEGER { other(1), sec2(2), sec3(3), sec4L(4), sec4H(5), sec5A(6), sec5B(7), sec6A(8), sec6B(9) } | current | Spectrum Effeciency Class. |
| RfInputPower | Integer32 (-999..-200|0) | current | RF Input power in dBm/10. |
| RfOutputPower | Integer32 (-100..45|255) | current | RF output power in dBm. |
| RFTxOperStatus | INTEGER { other(1), txOff(2), txOn(3), txStandby(4) } | current | This TC enumerates the Tx operational status. |