ZTE-AN-GPON-ONUPRF-MIB
212 objects
The MIB module for the management of GPON ONU profile.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| ZTE-AN-PON-REMOTE-ONU-MIB | zxAnPonRmOnuIfIndex |
| ZTE-AN-PON-TC-MIB | ZxAnGponOnuGemPortIndex ZxAnGponOnuTcontIndex ZxAnGponOnuVportIndex |
| ZTE-AN-SMI | zxAnPon |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.500.21 | IdentityzxAnGponOnuPrfMib | The MIB module for the management of GPON ONU profile. | ||
| 1.3.6.1.4.1.3902.1082.500.21.2 | NodezxAnGponOnuPrfObjects | |||
| 1.3.6.1.4.1.3902.1082.500.21.2.1 | NodezxAnGponOnuLinePrfObjects | |||
| 1.3.6.1.4.1.3902.1082.500.21.2.1.2 | TablezxAnGponOPTcontTable | not-accessible | current | The ONU profile T-CONT table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1 | RowzxAnGponOPTcontEntry | not-accessible | current | The ONU profile T-CONT entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.1 | ColumnzxAnGponOPName | not-accessible | current | Name of ONU profile. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.2 | ColumnzxAnGponOPTcontIndex | not-accessible | current | An arbitrary (unique) integer for identifying an entry in the table, from 1 to upper limit supported T-CONT count of ONU type. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.3 | ColumnzxAnGponOPTcontName | read-create | current | Name of the T-CONT. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.4 | ColumnzxAnGponOPTcontBwPrfName | read-create | current | The name of profile used by T-CONT bandwidth configuration. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.5 | ColumnzxAnGponOPTcontDbaGapMode | read-create | current | The DBA gap mode. For GPON ONU, the explanations of these modes are as follows: mode0 is one frame, mode1 is two frames, mode2 is four frames, mode3 is eight f… |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.50 | ColumnzxAnGponOPTcontRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.3 | TablezxAnGponOPGemPortTable | not-accessible | current | The ONU profile GEM port table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1 | RowzxAnGponOPGemPortEntry | not-accessible | current | The ONU profile GEM port entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.1 | ColumnzxAnGponOPGemPortIndex | not-accessible | current | An arbitrary (unique) integer for identifying an entry in the table, from 1 to upper limit supported GEM port count of ONU type. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.2 | ColumnzxAnGponOPGemPortName | read-create | current | Name of the GEM port. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.3 | ColumnzxAnGponOPGemPortTcontIndex | read-create | current | It is equal to the 'zxAnGponOPTcontIndex' of 'zxAnGponOPTcontTable'. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.4 | ColumnzxAnGponOPGemPortQueueOfTcont | read-create | current | The queue (index from 0 to 7) of T-CONT for this GEM port. Queue 7 is the highest priority queue. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.5 | ColumnzxAnGponOPGemPortEncrypt | read-create | current | The encrypt state of this GEM port. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.50 | ColumnzxAnGponOPGemPortRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.4 | TablezxAnGponOPMappingTable | not-accessible | current | The ONU profile mapping table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1 | RowzxAnGponOPMappingEntry | not-accessible | current | The ONU profile mapping entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.1 | ColumnzxAnGponOPMappingName | not-accessible | current | Name of service. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.2 | ColumnzxAnGponOPMappingGemPort | read-create | current | GEM port index of service. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.3 | ColumnzxAnGponOPMappingIfId | read-create | current | 4bytes value contains:type (MSB 2bytes)/ifId (LSB 2bytes). type means 0 bridge 1 ethuni 2 iphost 3 wifiuni 4 veip 5 wan If type is 'bridge', then the 2-byte if… |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.4 | ColumnzxAnGponOPMappingType | read-create | current | Map type of service. - cos: mapping to GEM port by CoS value - vlan: mapping to GEM port by VLAN value - cosAndVlan: mapping to GEM port by both cos and VLAN v… |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.5 | ColumnzxAnGponOPMappingCos | read-create | current | A bitfield defines the frames with the priority related with this service. MSB stands for priority 7, LSB stands for priority 0. A bit value of 0 specifies tha… |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.6 | ColumnzxAnGponOPMappingVid | read-create | current | Each 2 bytes stand for the VLAN ID related with this service. The first N*2 bytes are valid, until VLAN ID=0. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.50 | ColumnzxAnGponOPMappingRowStatus | read-create | current | The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'crea… |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.5 | TablezxAnGponOPOnuConfTable | not-accessible | current | The ONU profile ONU configuration table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.5.1 | RowzxAnGponOPOnuConfEntry | not-accessible | current | The ONU profile ONU configuration entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.5.1.1 | ColumnzxAnGponOPOnuConfVportMode | read-write | current | The VPort mode. gemport(1): a related VPort will be created automatically when a GEM port is created. manual(3): VPort will be created manually. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.5.1.2 | ColumnzxAnGponOPOnuConfUsFecEnable | read-write | current | Enables or disables the ONU upstream FEC function. enabled(1): enable the ONU upstream FEC function. disabled(2): disable the ONU upstream FEC function. auto(3… |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.6 | TablezxAnGponOPBpConfTable | not-accessible | current | The ONU profile VPort table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.6.1 | RowzxAnGponOPBpConfEntry | not-accessible | current | The ONU profile VPort entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.1 | ColumnzxAnGponOPBpVportId | not-accessible | current | VPort ID. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.2 | ColumnzxAnGponOPBpName | read-create | current | Name of the VPort. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.3 | ColumnzxAnGponOPBpMapType | read-create | current | Map type of GEM port and VPort. cos(1): mapping by CoS value. vlan(2): mapping by VLAN value. cosPlusVlan(3): mapping by CoS and VLAN value. oneToOne(4): mappi… |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.50 | ColumnzxAnGponOPBpRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: To create a row in this table, a manager must set this object to … |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.7 | TablezxAnGponOPBpMapConfTable | not-accessible | current | The ONU profile VPort mapping table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.7.1 | RowzxAnGponOPBpMapConfEntry | not-accessible | current | The ONU profile VPort mapping entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.7.1.1 | ColumnzxAnGponOPBpMapConfCos | not-accessible | current | A CoS value (0..7) referenced by a GEM port mapped to a VPort. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.7.1.2 | ColumnzxAnGponOPBpMapConfVid | not-accessible | current | A VLAN ID referenced by a GEM port mapped to a VPort. The value 65535 indicates the untagged frames. When VPort mapping type is oneToOne(4) or cos(1), this val… |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.7.1.50 | ColumnzxAnGponOPBpMapConfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: To create a row in this table, a manager must set this object to … |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.8 | TablezxAnGponOPTcontQueueSchedTable | not-accessible | current | The ONU profile T-CONT queue schedule table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.8.1 | RowzxAnGponOPTcontQueueSchedEntry | not-accessible | current | The ONU profile T-CONT queue schedule entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.8.1.1 | ColumnzxAnGponOPTcontQueueSchedPrfName | read-write | current | The T-CONT queue schedule profile name, this profile is defined in zxAnGponRmTrafficSchedPrfTable. The empty string indicates that no profile is bound to this … |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.9 | TablezxAnGponOPGemPortCurrPerfTable | not-accessible | current | The ONU profile GPON GEM port current performance table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.9.1 | RowzxAnGponOPGemPortCurrPerfEntry | not-accessible | current | The ONU profile GPON GEM port current performance entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.1.9.1.50 | ColumnzxAnGponOPGemPortCurrRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2 | NodezxAnGponOnuServicePrfObjects | |||
| 1.3.6.1.4.1.3902.1082.500.21.2.2.2 | TablezxAnGponOPVlanPortTable | not-accessible | current | The ONU profile port VLAN table. A table containing VLAN port information for VLANs configured into the bridge by (local or network) management, specifying the… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.2.1 | RowzxAnGponOPVlanPortEntry | not-accessible | current | The ONU profile port VLAN entry. Supporting Ethernet UNI, WiFi UNI, VEIP, GEM port, multicast GEM port, WAN and xDSL UNI. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.3 | ColumnzxAnGponOPVlanPortMode | read-write | current | The access mode of the port. There are five types: - access: access mode of port access - trunk: trunk mode of port access - hybrid: hybrid mode of port access… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.4 | ColumnzxAnGponOPVlanPortDefaultVid | read-write | current | The PVID of the port. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.5 | ColumnzxAnGponOPVlanPortDefaultCos | read-write | current | The default priority of the port. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.6 | ColumnzxAnGponOPVlanPortVlanList | read-only | current | The VLAN sequence of the port. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.3 | TablezxAnGponOPVlanPortCmdTable | not-accessible | current | The port VLAN operation command table. This table is used for ONU profile. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1 | RowzxAnGponOPVlanPortCmdEntry | not-accessible | current | The port VLAN operation command entry. Supporting Ethernet UNI, WiFi UNI, VEIP, GEM port, multicast GEM port, WAN and xDSL UNI. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1.1 | ColumnzxAnGponOPVlanPortCmd | read-write | current | The command to operate VLAN list of 'zxAnGponOPVlanPortTable'. The multi-variables binding rule should be complied with when a manager configures port VLAN cmd… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.3.1.2 | ColumnzxAnGponOPVlanPortVid | read-write | current | The port VLAN ID. This variable must comply with the multi-variables binding rule described in 'zxAnGponOPVlanPortCmd'. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.4 | TablezxAnGponOPVlanTransTable | not-accessible | current | The ONU profile port VLAN translation table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1 | RowzxAnGponOPVlanTransEntry | not-accessible | current | The ONU profile port VLAN translation entry. Supporting Ethernet UNI, WiFi UNI, VEIP, GEM port, multicast GEM port, WAN and xDSL UNI. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.1 | ColumnzxAnGponOPVlanTransUserVid | not-accessible | current | User VLAN ID for translation. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.2 | ColumnzxAnGponOPVlanTransUserCos | not-accessible | current | User priority for translation, the range of priority is from 0 to 8, and '8' indicates no configuration. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.3 | ColumnzxAnGponOPVlanTransCVid | read-create | current | Inner VLAN for VLAN translate, '0' indicates no translation. The multi-variables binding rule should be complied with when a manager configures port VLAN trans… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.4 | ColumnzxAnGponOPVlanTransCtagCos | read-create | current | Inner VLAN priority for VLAN translate, '8' indicates no translation. This variable must comply with the multi-variables binding rule described in 'zxAnGponOPV… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.5 | ColumnzxAnGponOPVlanTransSVid | read-create | current | Outer VLAN for VLAN translate, '0' indicates no SVLAN. This variable must comply with the multi-variables binding rule described in 'zxAnGponOPVlanTransCVid'. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.6 | ColumnzxAnGponOPVlanTransStagCos | read-create | current | Outer VLAN priority for VLAN translate, '8' indicates copy priority from inner VLAN priority. This variable must comply with the multi-variables binding rule d… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.50 | ColumnzxAnGponOPVlanTransRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.5 | TablezxAnGponOPMVlanTable | not-accessible | current | The ONU profile multicast VLAN table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.5.1 | RowzxAnGponOPMVlanEntry | not-accessible | current | The ONU profile multicast VLAN entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.5.1.1 | ColumnzxAnGponOPMVid | not-accessible | current | This attribute represents the VLAN ID (1~4094). |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.5.1.50 | ColumnzxAnGponOPMVlanRowStatus | read-create | current | The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'crea… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.6 | TablezxAnGponOPIgmpConfTable | not-accessible | current | The ONU profile IGMP configuration table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1 | RowzxAnGponOPIgmpConfEntry | not-accessible | current | The ONU profile IGMP configuration entry. Supporting Ethernet UNI and VEIP. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.1 | ColumnzxAnGponOPIgmpUsedPrfName | read-create | current | This attribute points to an instance of the multicast operations profile. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.2 | ColumnzxAnGponOPIgmpMaxGroups | read-create | current | This attribute specifies the maximum number of dynamic multicast groups that may be replicated to the client port at any one time. The default value 0 specifie… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.3 | ColumnzxAnGponOPIgmpMaxBw | read-create | current | This attribute specifies the maximum imputed dynamic bandwidth, in kbps, that may be delivered to the client port at any one time. The default value 0 specifie… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.4 | ColumnzxAnGponOPIgmpBwEnforce | read-create | current | enabled: attempts to exceed the max multicast bandwidth be counted and denied. disabled: such attempts be counted but honored. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.50 | ColumnzxAnGponOPIgmpConfRowStatus | read-create | current | The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'crea… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.7 | TablezxAnGponOPTrafficSchedTable | not-accessible | current | The ONU profile traffic scheduler configuration table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.7.1 | RowzxAnGponOPTrafficSchedEntry | not-accessible | current | The ONU profile traffic scheduler configuration entry. Supporting Ethernet UNI. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.7.1.1 | ColumnzxAnGponOPTrafficSchedPrfName | read-write | current | The ONU UNI traffic scheduler profile name. The empty string indicates no profile is bounded. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.8 | TablezxAnGponOPExtVlanTable | not-accessible | current | The ONU profile extended VLAN configuration table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1 | RowzxAnGponOPExtVlanEntry | not-accessible | current | The ONU profile extended VLAN configuration entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.1 | ColumnzxAnGponOPExtVlanInputTpid | read-create | current | This attribute gives the special TPID value for operations on the input (filtering) side of the table. Typical values include 0x8a88 and 0x9100. Default value … |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.2 | ColumnzxAnGponOPExtVlanOutputTpid | read-create | current | This attribute gives the special TPID value for operations on the output (tagging) side of the table. Typical values include 0x8a88 and 0x9100. Default value i… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.3 | ColumnzxAnGponOPExtVlanDsMode | read-create | current | Regardless of its association, the extended VLAN tagging operation configuration data ME pertains to upstream traffic. This attribute specifies the mode for do… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.4 | ColumnzxAnGponOPExtVlanDscp2CosPrf | read-create | current | This attribute refers to 'zxAnGponRmDscp2CosPrfName', specifies mapping from DSCP to P-bits. The attribute can be considered a bit string sequence of 64 3-bit … |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.50 | ColumnzxAnGponOPExtVlanRowStatus | read-create | current | The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'crea… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.9 | TablezxAnGponOPExtVlanRuleConfTable | not-accessible | current | The ONU profile extended VLAN rule configuration table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.9.1 | RowzxAnGponOPExtVlanRuleConfEntry | not-accessible | current | The ONU profile extended VLAN rule configuration entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.9.1.1 | ColumnzxAnGponOPExtVlanConfFiltRule | not-accessible | current | This attribute refers to 'zxAnGponRmFiltRuleName' provides a unique profile of filter for this extended VLAN table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.9.1.2 | ColumnzxAnGponOPExtVlanConfTreatRule | read-create | current | This attribute refers to 'zxAnGponRmTrtRuleName' provides a unique profile of treatment for this extended VLAN table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.9.1.50 | ColumnzxAnGponOPExtVlanConfRowStatus | read-create | current | The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'crea… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10 | TablezxAnGponOPBrgConfTable | not-accessible | current | The ONU profile bridge configuration table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1 | RowzxAnGponOPBrgConfEntry | not-accessible | current | The ONU profile bridge configuration entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.1 | ColumnzxAnGponOPBrgIndex | not-accessible | current | This attribute indicates the index of MAC bridge in ONU, from 1 to 65535. The first byte specifies the slot ID associated with this MAC bridge, the second byte… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.2 | ColumnzxAnGponOPBrgStpEnable | read-write | current | This attribute indicates whether or not a spanning tree algorithm is enabled. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.3 | ColumnzxAnGponOPBrgLearningEnable | read-write | current | This attribute indicates whether or not the learning function of the bridge is enabled. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.4 | ColumnzxAnGponOPBrgLocalBridgeEnable | read-write | current | This attribute indicates whether or not the bridging between UNI ports is enabled. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.5 | ColumnzxAnGponOPBrgPri | read-write | current | This attribute specifies the bridge priority in the range 0..65535. The value of this attribute is copied to the bridge priority attribute of the associated MA… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.6 | ColumnzxAnGponOPBrgMaxAge | read-write | current | This attribute indicates the maximum age for an entry in the spanning tree listing. It indicates the maximum age in seconds for received protocol information b… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.7 | ColumnzxAnGponOPBrgHelloTime | read-write | current | This attribute provides the time interval between hello packets. It is the time interval, in seconds, that a bridge advertises its presence while as a root or … |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.8 | ColumnzxAnGponOPBrgForwardDelay | read-write | current | This attribute gives the time that the bridge on the Ethernet card in the ONU retains a packet before forwarding it. (It indicates the value in seconds that th… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.9 | ColumnzxAnGponOPBrgUnknownMacDiscard | read-write | current | This attribute indicates the treatment of MAC frames with unknown destination addresses. enabled: frames with unknown destination addresses will be discarded. … |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.10 | ColumnzxAnGponOPBrgMacLearningDepth | read-write | current | This attribute specifies the maximum number of UNI MAC addresses to be learned by the bridge. The default value 0 specifies that there is no administratively-i… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.11 | ColumnzxAnGponOPBrgAgingTime | read-write | current | This attribute specifies the age of dynamic filtering entries in the bridge database, after which unrefreshed entries are discarded. In accordance with [IEEE 8… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11 | TablezxAnGponOPWanIpConfTable | not-accessible | current | The ONU profile WAN IP configuration table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1 | RowzxAnGponOPWanIpConfEntry | not-accessible | current | The ONU profile WAN IP configuration entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.1 | ColumnzxAnGponOPWanIpIndex | not-accessible | current | The ID of WAN IP. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.2 | ColumnzxAnGponOPWanIpMode | read-create | current | IP address configuration mode. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.3 | ColumnzxAnGponOPWanVlanPrf | read-create | current | The name of table 'zxAnGponOPVlanPrfTable'. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.4 | ColumnzxAnGponOPWanHostId | read-create | current | The ONU IP host ID. The value 0 indicates this attribute is not configured. The following IP host ID format is defined: MSB : Most Significant Byte LSB : Least… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.5 | ColumnzxAnGponOPWanOnuIdentifier | read-create | current | A unique ONU identifier string. This string, if set is provided as part of the DHCP request to allow an alternative to MAC Address in retrieving the DHCP param… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.6 | ColumnzxAnGponOPWanPppoeAuthMode | read-create | current | This attribute is related to 'zxAnGponOPWanIpMode', and it is valid only when 'zxAnGponOPWanIpMode' is PPPoE. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.7 | ColumnzxAnGponOPWanPppoeUsername | read-create | current | This attribute is related to 'zxAnGponOPWanIpMode', and it is valid only when 'zxAnGponOPWanIpMode' is PPPoE. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.8 | ColumnzxAnGponOPWanPppoePassword | read-create | current | This attribute is related to 'zxAnGponOPWanIpMode', and it is valid only when 'zxAnGponOPWanIpMode' is PPPoE. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.9 | ColumnzxAnGponOPWanRspPing | read-create | current | This attribute indicates whether respond to pings enabled. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.10 | ColumnzxAnGponOPWanRspTraceRoute | read-create | current | This attribute indicates whether respond to trace route enabled. This attribute is only valid for IPv4 and this value is disabled(2) for IPv6. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.11 | ColumnzxAnGponOPWanRsEnable | read-create | current | This attribute indicates whether respond to router solicitation (RS) messages enabled. This attribute is only valid for IPv6 and this value is disabled(2) for … |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.12 | ColumnzxAnGponOPWanOnLinkPrefix | read-create | current | It is the manually provisioned on-link prefix used for destination IPv6 addresses of IPv6 host services. The attribute is structured as follows: Prefix length,… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.13 | ColumnzxAnGponOPWanPppoeServiceName | read-create | current | The PPPoE service name. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.50 | ColumnzxAnGponOPWanIpConfRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12 | TablezxAnGponOPVoipConfTable | not-accessible | current | The ONU profile VoIP configuration table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1 | RowzxAnGponOPVoipConfEntry | not-accessible | current | The ONU profile VoIP configuration entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.1 | ColumnzxAnGponOPVoipSignalProtoUsed | read-write | current | This attribute indicates the type of VoIP signaling protocol used for ONU. Only one type of protocol is allowed. Valid values are: 0x01 = None 0x02 = SIP 0x03 … |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.2 | ColumnzxAnGponOPVoipConfMethodUsed | read-write | current | This attribute indicates the ONU configuration method. 0x01 the ONU default - do not configure. 0x02 indicate use of OMCI for VoIP service configuration of the… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.3 | ColumnzxAnGponOPVoipDomainName | read-write | current | This attribute indicates the ONU domain name that is used to locate ONU by SS when the mode of MG registered to SS is using domain name. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.4 | ColumnzxAnGponOPVoipH248EquipName | read-write | current | This attribute indicates the ONU equipment name that is used to locate ONU by SS when the mode of MG registered to SS is using equipment name. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.5 | ColumnzxAnGponOPVoipH248RegMode | read-write | current | This attribute indicates the MID flag. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.6 | ColumnzxAnGponOPVoipMgcRegMode | read-write | current | This attribute indicates the register mode. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.7 | ColumnzxAnGponOPVoipLineName | read-write | current | This attribute indicates the line name sequence number. The default value is the empty string. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.8 | ColumnzxAnGponOPVoipIpAllocMode | read-write | current | This attribute indicates the VoIP allocate mode. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.9 | ColumnzxAnGponOPVoipSvrAddr | read-write | current | This attribute indicates the address of the server to contact using the method indicated in the VoIP configuration method used attribute. This attribute is onl… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.10 | ColumnzxAnGponOPVoipSvrValidation | read-write | current | This attribute indicates the user validation scheme. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.11 | ColumnzxAnGponOPVoipSvrUsername | read-write | current | This attribute indicates the user name for validation. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.12 | ColumnzxAnGponOPVoipSvrPassword | read-write | current | This attribute indicates the password for validation. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.13 | ColumnzxAnGponOPVoipSvrRealm | read-write | current | This attribute indicates a string to be displayed to users so they know which user name and password to use. This string should contain at least the name of th… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.14 | ColumnzxAnGponOPVoipSvrRetrieveFile | read-write | current | This attribute indicates an action. It will be set independently to notify ONU to retrieve file again. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13 | TablezxAnGponOPVoipIpConfTable | not-accessible | current | The ONU profile VoIP IP configuration table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1 | RowzxAnGponOPVoipIpConfEntry | not-accessible | current | The ONU profile VoIP IP configuration entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.1 | ColumnzxAnGponOPVoipIpSlotId | not-accessible | current | This attribute indicates the index of slot in ONU. If slot ID is zero, it means the ONU is box-type, which can not plug card. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.2 | ColumnzxAnGponOPVoipIpMediaIndex | not-accessible | current | This attribute indicates the whether the separation of media and signaling. If 'media' is configured,The media will use a separation IP address, otherwise medi… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.3 | ColumnzxAnGponOPVoipIpMode | read-create | current | This attribute indicates the IP address configuration mode. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.4 | ColumnzxAnGponOPVoipIpPrf | read-create | current | This attribute indicates the VoIP IP profile Name, it refers to 'zxAnGponRmIpPrfName'. If no profile name is indicated, this attribute is set to a empty string. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.5 | ColumnzxAnGponOPVoipIpVlanPrf | read-create | current | This attribute indicates the VoIP IP VLAN profile Name, it refers to 'zxAnGponRmVlanPrfName'. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.6 | ColumnzxAnGponOPVoipIpHostId | read-create | current | This attribute indicates the ONU VoIP host ID. The value 0 indicates this attribute is not configured. The following VoIP host ID format is defined: MSB : Most… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.7 | ColumnzxAnGponOPVoipIpOnuIdentifier | read-create | current | This attribute indicates the ONU identifier string. This attribute is relation to 'zxAnGponOPVoipIpMode'. This attribute is valid only when 'zxAnGponOPVoipIpMo… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.8 | ColumnzxAnGponOPVoipIpAddrType | read-create | current | This attribute indicates the type of IP address denoted in zxAnGponOPVoipIpAddr object. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.9 | ColumnzxAnGponOPVoipIpAddr | read-create | current | This attribute indicates the VoIP IP address. This attribute is relation to 'zxAnGponOPVoipIpMode'. This attribute is valid only when 'zxAnGponOPVoipIpMode' is… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.10 | ColumnzxAnGponOPVoipIpAddrPfxLen | read-create | current | This attribute indicates the VoIP IP address prefix length. This attribute is only valid for IPv4 and this value is 0 for IPv6. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.11 | ColumnzxAnGponOPVoipIpPppoeMode | read-create | current | This attribute indicates the VoIP IP PPPoE mode. This attribute is relation to 'zxAnGponOPVoipIpMode'. This attribute is valid only when 'zxAnGponOPVoipIpMode'… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.12 | ColumnzxAnGponOPVoipIpPppoeUsername | read-create | current | This attribute indicates the VoIP IP PPPoE user name. This attribute is relation to 'zxAnGponOPVoipIpMode'. This attribute is valid only when 'zxAnGponOPVoipIp… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.13 | ColumnzxAnGponOPVoipIpPppoePassword | read-create | current | This attribute indicates the VoIP IP PPPoE password. This attribute is relation to 'zxAnGponOPVoipIpMode'. This attribute is valid only when 'zxAnGponOPVoipIpM… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.14 | ColumnzxAnGponOPVoipIpRspPing | read-create | current | This attribute indicates whether respond to pings enabled. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.15 | ColumnzxAnGponOPVoipIpRspTraceRoute | read-create | current | This attribute indicates whether respond to trace route enabled. This attribute is only valid for IPv4 and this value is disabled(2) for IPv6. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.16 | ColumnzxAnGponOPVoipIpRsEnable | read-create | current | This attribute indicates enabling or disabling response to router solicitation (RS) messages function. This attribute is only valid for IPv6 and this value is … |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.17 | ColumnzxAnGponOPVoipIpOnLinkPrefix | read-create | current | This attribute indicates the manually provisioned on-link prefix used for destination IPv6 addresses of IPv6 host services. The attribute is structured as foll… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.18 | ColumnzxAnGponOPVoipIpPppoeServiceName | read-create | current | This attribute indicates the PPPoE service name. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.50 | ColumnzxAnGponOPVoipIpConfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: To create a row in this table, a manager must set this object to … |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.14 | TablezxAnGponOPUniDhcpIpRetrieveTable | not-accessible | current | The ONU profile Ethernet UNI's DHCP controlling configuration table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.14.1 | RowzxAnGponOPUniDhcpIpRetrieveEntry | not-accessible | current | The ONU profile Ethernet UNI's DHCP controlling configuration entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.14.1.1 | ColumnzxAnGponOPUniDhcpIpRetrieveMode | read-write | current | This attribute indicates the Ethernet UNI how to obtain its IP address (from ONU or network), when ONU enables the DHCP server function. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.15 | TablezxAnGponOPIpStaticRouteTable | not-accessible | current | This table contains information of ONU IP static routes configuration. This managed entity stores IP static routes. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1 | RowzxAnGponOPIpStaticRouteEntry | not-accessible | current | It is entry in the zxAnGponOPIpStaticRouteTable. The index 'zxAnGponOPName' represents the normal ONU index. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.1 | ColumnzxAnGponOPIpRouteDestType | not-accessible | current | The type of the 'zxAnGponOPIpRouteDest' address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are all… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.2 | ColumnzxAnGponOPIpRouteDest | not-accessible | current | The destination IP address of this route. The type of this address is determined by the value of the 'zxAnGponOPIpRouteDestType' object. The values for the ind… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.3 | ColumnzxAnGponOPIpRoutePfxLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the zxAnGpon… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.4 | ColumnzxAnGponOPIpRouteNextHopType | read-create | current | The type of the 'zxAnGponOPIpRouteNextHopType' address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those … |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.5 | ColumnzxAnGponOPIpRouteNextHop | read-create | current | On remote routes, the address of the next system route. For non-remote routes, a zero length string. The type of this address is determined by the value of the… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.6 | ColumnzxAnGponOPIpRouteOutPort | read-create | current | The number of the IP port through which the next hop should be reached. This field is used when the next hop is reached through an unnumbered link and when a s… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.50 | ColumnzxAnGponOPIpRouteRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.16 | TablezxAnGponOPVeipTable | not-accessible | current | zxAnGponOPVeipTable table. This managed entity represents the data plane hand-off point in an ONU to a separate (non-OMCI) management domain. The virtual Ether… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1 | RowzxAnGponOPVeipEntry | not-accessible | current | GPON VEIP configuration entry. The index 'zxAnGponOPName' represents the normal ONU index or the virtual ONU index for profile. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.1 | ColumnzxAnGponOPVeipIndex | not-accessible | current | This attribute uniquely identifies each instance of this managed entity. To facilitate easy discovery, the ONU should assign IDs in the sequence 1, 2, .... The… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.2 | ColumnzxAnGponOPVeipAdminState | read-write | current | This attribute locks and unlocks the functions performed by this managed entity. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.3 | ColumnzxAnGponOPVeipInterdomainName | read-write | current | This attribute is a character string that provides an optional way to identify the virtual Ethernet interface point to a non-OMCI management domain. The interf… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.4 | ColumnzxAnGponOPVeipIsPortAssigned | read-write | current | This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP conne… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.5 | ColumnzxAnGponOPVeipProtoType | read-write | current | This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP conne… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.6 | ColumnzxAnGponOPVeipAssignedPort | read-write | current | This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP conne… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.7 | ColumnzxAnGponOPVeipHostId | read-write | current | This attribute points to an instance of the TCP/UDP config data managed entity, which provides for OMCI management of the non-OMCI management domain's IP conne… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.17 | TablezxAnGponOPTr069AcsTable | not-accessible | current | zxAnGponOPTr069AcsTable table. If functions within the ONU are managed by [BBF TR-69], this ME allows OMCI configuration of the ACS URL and related authenticat… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1 | RowzxAnGponOPTr069AcsEntry | not-accessible | current | GPON Tr069 management server configuration entry. The index 'zxAnGponOPName' represents the normal ONU index or the virtual ONU index for profile. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.1 | ColumnzxAnGponOPTr069AcsAdminState | read-write | current | This attribute locks and unlocks the functions performed by this managed entity. When the administrative state is locked, the functions of this ME are disabled… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.2 | ColumnzxAnGponOPTr069AcsUri | read-write | current | This attribute points to the large string ME that contains the network address. It may contain a fully qualified domain name, URI or IP address. The URI may al… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.3 | ColumnzxAnGponOPTr069AcsValidation | read-write | current | This attribute specifies the validation scheme used when the ONU validates a challenge. Validation schemes are defined as follows: 1 Validation disabled. 2 Val… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.4 | ColumnzxAnGponOPTr069AcsUsername | read-write | current | This string attribute is the user name. If the string is shorter than 25 bytes, it must be null terminated. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.5 | ColumnzxAnGponOPTr069AcsPassword | read-write | current | This string attribute is the password. If the string is shorter than 25 bytes, it must be null terminated. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.6 | ColumnzxAnGponOPTr069AcsRealm | read-write | current | This string attribute specifies the realm used in md5 digest authentication. If the string is shorter than 25 bytes, it must be null terminated. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.7 | ColumnzxAnGponOPTr069AssociatedTag | read-write | current | This attribute is a TCI value for TR-69 management traffic passing through the virtual ethernet interface point. A TCI, comprising user priority, CFI and VID, … |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18 | TablezxAnGponOPEthUniTable | not-accessible | current | The ONU profile Ethernet UNI configuration table. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1 | RowzxAnGponOPEthUniEntry | not-accessible | current | The ONU profile Ethernet UNI configuration entry. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.1 | ColumnzxAnGponOPEthUniExpectedType | read-write | current | The following coding is used for this attribute: 0x00 = by autosensing, 0x01 to 0xFE (1 to 254) = one of the values from table 3 that is compatible with the ty… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.2 | ColumnzxAnGponOPEthUniIfSpeedConf | read-write | current | For 10/100 Base-Tx Ethernet interfaces, this attribute is used to set the configuration options: auto(1): Auto-sensing; half10(2): 10BaseT (half duplex); full1… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.3 | ColumnzxAnGponOPEthUniLoopbackConf | read-write | current | This attribute is used to set the Ethernet loopback configuration: No loopback (value 0x01), loop3 (value 0x04, Loopback of downstream traffic after PHY transc… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.4 | ColumnzxAnGponOPEthUniAdminState | read-write | current | This attribute is used to activate (unlock: value 0x01) and deactivate(lock: value 0x02) the functions performed by instances of this managed entity. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.5 | ColumnzxAnGponOPEthUniMaxFrameSize | read-write | current | This attribute denotes the maximum allowed frame size to be transmitted across this interface. |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.6 | ColumnzxAnGponOPEthUniDteOrDceInd | read-write | current | This attribute specifies the Ethernet interface wiring: 1 DCE or MDI-X (default). 2 DTE or MDI. 3 Automatic selection |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.7 | ColumnzxAnGponOPEthUniPauseTime | read-write | current | This attribute allows the ONU line card to request that the customer terminal temporarily suspend sending data. Units are in pause quanta(1 pause_quantum equal… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.8 | ColumnzxAnGponOPEthUniBridgeOrIpInd | read-write | current | This attribute specifies whether the Ethernet interface is bridged or derived from an IP router function. 1 Bridged 2 IP router 3 Depends on the parent circuit… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.9 | ColumnzxAnGponOPEthUniArcEnable | read-write | current | This attribute allows the activation of alarm reporting control (ARC) for this PPTP or cardholder. The attribute works in concert with the ARC interval attribu… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.10 | ColumnzxAnGponOPEthUniArcInterval | read-write | current | This attribute defines the interval to be used with the ARC function for this PPTP or cardholder. The values 0 through 254 give the duration in minutes for the… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.11 | ColumnzxAnGponOPEthUniPppoeFilter | read-write | current | This attribute may be used to control filtering of PPPoE packets on this Ethernet port. The value 2 is used to disable filtering. The value 1 is used to enable… |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.12 | ColumnzxAnGponOPEthUniPowerFeed | read-write | current | This attribute controls whether power is provided to an external equipment over the Ethernet PPTP. Value 1 enables power over Ethernet port. The default value … |
| 1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.13 | ColumnzxAnGponOPEthUniLoopDetect | read-write | current | This attribute enable or disable the loopback detection. |
| 1.3.6.1.4.1.3902.1082.500.21.4 | NodezxAnGponOnuPrfConformance | |||
| 1.3.6.1.4.1.3902.1082.500.21.4.1 | NodezxAnGponOnuPrfCompliances | |||
| 1.3.6.1.4.1.3902.1082.500.21.4.1.1 | CompliancezxAnGponOnuPrfCompliance | current | The compliance statement for entities which implements the ZTE-AN-GPON-ONUPRF-MIB. | |
| 1.3.6.1.4.1.3902.1082.500.21.4.2 | NodezxAnGponOnuPrfGroups | |||
| 1.3.6.1.4.1.3902.1082.500.21.4.2.1 | GroupzxAnGponOnuPrfLineGroup | current | A collection of objects for ONU line profile group configuration. | |
| 1.3.6.1.4.1.3902.1082.500.21.4.2.2 | GroupzxAnGponOnuPrfServiceGroup | current | A collection of objects for ONU service profile group configuration. |