ZTE-AN-PON-REMOTE-ONU-MIB
142 objects
The MIB module for the management of PON remote ONU service.
Imported Objects
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| ZTE-AN-PON-BASE-MIB | zxAnPonOnuIndex |
| ZTE-AN-PON-TC-MIB | ZxAnPonRmOnuIfIndex ZxAnPonRmOnuUniIndex |
| ZTE-AN-SMI | zxAnPon |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.500.3 | IdentityzxAnPonRemoteOnuMib | The MIB module for the management of PON remote ONU service. | ||
| 1.3.6.1.4.1.3902.1082.500.3.2 | NodezxAnPonRmOnuObjects | |||
| 1.3.6.1.4.1.3902.1082.500.3.2.1 | NodezxAnPonRmOnuProtocolObjects | |||
| 1.3.6.1.4.1.3902.1082.500.3.2.1.5 | TablezxAnPonRmOnuIfProtoConfTable | not-accessible | current | This table includes protocol configuration information of ONU's Ethernet UNI port. |
| 1.3.6.1.4.1.3902.1082.500.3.2.1.5.1 | RowzxAnPonRmOnuIfProtoConfEntry | not-accessible | current | An entry in zxAnPonRmOnuIfProtoConfTable. |
| 1.3.6.1.4.1.3902.1082.500.3.2.1.5.1.1 | ColumnzxAnPonRmOnuIfIndex | not-accessible | current | This attribute specifies the index of ONU's interface. |
| 1.3.6.1.4.1.3902.1082.500.3.2.1.5.1.2 | ColumnzxAnPonRmOnuIfProtoPktsLimitPrf | read-write | current | Refers to 'zxAnPonRmProtoPktsLimitPrfName'. |
| 1.3.6.1.4.1.3902.1082.500.3.2.1.5.1.3 | ColumnzxAnPonRmOnuIfProtoEnablePrf | read-write | current | Refers to 'zxAnPonRmProtoEnablePrfName'. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2 | NodezxAnPonRmOnuVoipObjects | |||
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2 | TablezxAnPonRmPotsCallDataRecordTable | not-accessible | current | PON ONU POTS calling data record table. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1 | RowzxAnPonRmPotsCallDataRecordEntry | not-accessible | current | An entry in zxAnPonRmPotsCallDataRecordTable. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.1 | ColumnzxAnPonRmOnuUniIndex | not-accessible | current | This attribute indicates the index of UNI in ONU. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.2 | ColumnzxAnPonRmPotsCdrIndex | not-accessible | current | VoIP calling record index. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.3 | ColumnzxAnPonRmPotsCdrTotalNum | read-only | current | The total number of the call records. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.4 | ColumnzxAnPonRmPotsCdrSequenceNum | read-only | current | Sequence number of call record. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.5 | ColumnzxAnPonRmPotsCdrTime | read-only | current | The time of one call, format is yyyy-mm-dd,HH:MM:SS. For example,2010-12-30,13:06:30. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.6 | ColumnzxAnPonRmPotsCdrDuration | read-only | current | The duration of one call. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.7 | ColumnzxAnPonRmPotsCdrCalleeNumber | read-only | current | Callee number. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.8 | ColumnzxAnPonRmPotsCdrCallerNumber | read-only | current | Caller number. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.9 | ColumnzxAnPonRmPotsCdrTxRtpPkts | read-only | current | The total number of RTP packets transmitted during the call. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.10 | ColumnzxAnPonRmPotsCdrRxRtpPkts | read-only | current | The total number of RTP packets received during the call. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.11 | ColumnzxAnPonRmPotsCdrLostRtpPkts | read-only | current | The total number of RTP packets lost during the call. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.12 | ColumnzxAnPonRmPotsCdrDiscardRtpPkts | read-only | current | The total number of RTP packets discarded due to error. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.13 | ColumnzxAnPonRmPotsCdrBufOverCount | read-only | current | Buffer overflow count. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.14 | ColumnzxAnPonRmPotsCdrBufEmptyCount | read-only | current | Buffer empty count. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.15 | ColumnzxAnPonRmPotsCdrRxAvgJitter | read-only | current | The average jitter for received packets. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.16 | ColumnzxAnPonRmPotsCdrFarEndRtcp | read-only | current | Whether or not the far end participated in RTCP. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.17 | ColumnzxAnPonRmPotsCdrRxPeakJitter | read-only | current | The peak jitter for received packets. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.18 | ColumnzxAnPonRmPotsCdrRxAvgJtrBufDep | read-only | current | The average jitter buffer depth for received packets. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.19 | ColumnzxAnPonRmPotsCdrFarEndRtcpXr | read-only | current | Whether or not the far end participated in RTCP-XR. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.20 | ColumnzxAnPonRmPotsCdrPeakRtDelay | read-only | current | The peak round-trip delay for a call. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.21 | ColumnzxAnPonRmPotsCdrAvgRtDelay | read-only | current | The average round-trip delay for the call. |
| 1.3.6.1.4.1.3902.1082.500.3.2.2.2.1.22 | ColumnzxAnPonRmPotsCdrAvgMos | read-only | current | The average mean opinion score. |
| 1.3.6.1.4.1.3902.1082.500.3.2.5 | NodezxAnPonRmOnuCliOverSnmpObjects | |||
| 1.3.6.1.4.1.3902.1082.500.3.2.5.3 | TablezxAnPonRmOnuRetrieveCmdTable | not-accessible | current | EMS can send zxAnPonRmOnuRetrieveCmd to retrieve ONU monitoring metrics which are not defined by ME of OMCI or OAM. Otherwise, EMS can retrieve error messages … |
| 1.3.6.1.4.1.3902.1082.500.3.2.5.3.1 | RowzxAnPonRmOnuRetrieveCmdEntry | not-accessible | current | An entry in zxAnPonRmOnuRetrieveCmdTable. |
| 1.3.6.1.4.1.3902.1082.500.3.2.5.3.1.1 | ColumnzxAnPonRmOnuRetrieveCmdSessionId | not-accessible | current | This attribute identifies the session ID. The session ID is generated by EMS and is unique in EMS. Session ID can ensure that reply result does not conflicting. |
| 1.3.6.1.4.1.3902.1082.500.3.2.5.3.1.2 | ColumnzxAnPonRmOnuRetrieveCmd | read-write | current | This attribute identifies commands which declared the information which EMS needs. |
| 1.3.6.1.4.1.3902.1082.500.3.2.5.3.1.3 | ColumnzxAnPonRmOnuRetrieveCmdReply | read-only | current | This attribute identifies the reply result. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8 | NodezxAnPonRmOnuCfmObjects | |||
| 1.3.6.1.4.1.3902.1082.500.3.2.8.2 | TablezxAnPonRmOnuCfmMdTable | not-accessible | current | The Maintenance Domain table. Each row in the table represents a different Maintenance Domain. A Maintenance Domain is described in 802.1ag (3.22) as the netwo… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.2.1 | RowzxAnPonRmOnuCfmMdEntry | not-accessible | current | The Maintenance Domain table entry. The index 'zxAnPonOnuIndex' represents the normal ONU index. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.2.1.1 | ColumnzxAnPonRmOnuCfmMdId | not-accessible | current | The index to the Maintenance Domain table. Referential integrity is required, i.e., the index needs to be persistent upon a reboot or restart of a device. The … |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.2.1.2 | ColumnzxAnPonRmOnuCfmMdFormat | read-create | current | The type (and thereby format) of the Maintenance Domain Name. A value that represents a type (and thereby the format) of a zxAnPonRmOnuCfmMdName. The value can… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.2.1.3 | ColumnzxAnPonRmOnuCfmMdName | read-create | current | The Maintenance Domain name. The type/format of this object is determined by the value of the zxAnPonRmOnuCfmMdFormat object. Each Maintenance Domain has uniqu… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.2.1.4 | ColumnzxAnPonRmOnuCfmMdMdLevel | read-create | current | The Maintenance Domain Level. Integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with … |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.2.1.5 | ColumnzxAnPonRmOnuCfmMdMhfCreation | read-create | current | Indicates if the Management Entity can create MHFs. Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this Main… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.2.1.6 | ColumnzxAnPonRmOnuCfmSendIdPermission | read-create | current | Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this Maintenance Domain. Since,… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.2.1.50 | ColumnzxAnPonRmOnuCfmMdRowStatus | read-create | current | The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.3 | TablezxAnPonRmOnuCfmMaTable | not-accessible | current | This managed entity models an IEEE 802.1 service defined on a bridge port. A maintenance association (MA) is a set of endpoints on opposite sides of a network,… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.3.1 | RowzxAnPonRmOnuCfmMaEntry | not-accessible | current | It is entry in the zxAnPonRmOnuCfmMaTable. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.3.1.1 | ColumnzxAnPonOnuCfmMaId | not-accessible | current | This attribute uniquely identifies an instance of MA. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.3.1.2 | ColumnzxAnPonOnuCfmMaNameFormat | read-create | current | A value that represents a type (and thereby the format) of a zxAnPonOnuCfmMaName. The value can be one of the following: primaryVid(1) Primary VLAN ID. 12 bits… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.3.1.3 | ColumnzxAnPonOnuCfmMaName | read-create | current | Denotes a generic Maintenance Association Name. It is the part of the Maintenance Association Identifier which is unique within the Maintenance Domain Name and… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.3.1.4 | ColumnzxAnPonOnuCfmMaCcmInterval | read-create | current | Indicates the interval at which CCMs are sent by a MEP. The possible values are: intervalInvalid(1) No CCMs are sent (disabled). interval300Hz(2) CCMs are sent… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.3.1.5 | ColumnzxAnPonOnuCfmMaVlans | read-create | current | This attribute is a list of up to 12 VLAN IDs with which this MA is associated. The first entry is understood to be the primary VLAN. eg: 100,15-16 means that … |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.3.1.6 | ColumnzxAnPonOnuCfmMaMhfCreation | read-create | current | This attribute determines whether the bridge creates a MHF or not, under circumstances defined in IEEE 802.1ag clause 22.2.3. defMHFnone(1), No MHFs can be cre… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.3.1.7 | ColumnzxAnPonOnuCfmMaIdPermission | read-create | current | This attribute determines the content of the sender ID TLV included in CFM messages transmitted by MP controlled by this MA. sendIdNone(1), The Sender ID TLV i… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.3.1.50 | ColumnzxAnPonOnuCfmMaRowStatus | read-create | current | This attribute indicates the operation of the entry. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4 | TablezxAnPonRmOnuCfmMepTable | not-accessible | current | This managed entity models a maintenance association end point (MEP) as defined primarily in IEEE 802.1ag and secondarily in ITU-T Y.1731. This table only used… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1 | RowzxAnPonRmOnuCfmMepEntry | not-accessible | current | It is entry in the zxAnPonRmOnuCfmMepTable. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.1 | ColumnzxAnPonOnuCfmMepId | not-accessible | current | This attribute specifies the MEP's own identity in the MA. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.2 | ColumnzxAnPonOnuCfmMepEthUniId | read-create | current | This attribute specifies the associated Ethernet port. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.3 | ColumnzxAnPonOnuCfmMepCcmEnabled | read-create | current | If set to true, the MEP will generate CCM messages. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.4 | ColumnzxAnPonOnuCfmMepServerEnable | read-create | current | This attribute specifies that wether to enable Y.1731 server MEP function. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.5 | ColumnzxAnPonOnuCfmMepDirection | read-create | current | The direction in which the MEP faces on the Bridge port. Indicates the direction in which the Maintenance association (MEP or MIP) faces on the bridge port: do… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.6 | ColumnzxAnPonOnuCfmMepPrimaryVid | read-create | current | An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.7 | ColumnzxAnPonOnuCfmMepAdminState | read-create | current | Administrative state of the MEP, unlock indicates that the MEP is to function normally, and lock indicates that it is to cease functioning. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.8 | ColumnzxAnPonOnuCfmMepPri | read-create | current | The priority value for CCMs and LTMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the bridge port for any of thi… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.9 | ColumnzxAnPonOnuCfmMepEgressId | read-create | current | This attribute comprises 8 bytes to be included in LTMs. They allow received LTRs to be directed to the correct originator. The attribute includes the originat… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.10 | ColumnzxAnPonOnuCfmMepRmepIds | read-create | current | This attribute lists up to 12 expected peer MEPs for CCMs, [IEEE 802.1ag] allows for multipoint networks, and therefore a list of peer MEPs. This attribute all… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.11 | ColumnzxAnPonOnuCfmMepAisEnable | read-create | current | This attribute enable generation of Ethernet AIS. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.12 | ColumnzxAnPonOnuCfmMepAisPeriod | read-create | current | This attribute specifies ethernet AIS transmission period. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.13 | ColumnzxAnPonOnuCfmMepAisPriority | read-create | current | This attribute specifies priority of transmitted ETH AIS frames. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.14 | ColumnzxAnPonOnuCfmMepAisLevel | read-create | current | This attribute specifies the maintenance level at which the client MEP exists. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.15 | ColumnzxAnPonOnuCfmMepAlarmThreshold | read-create | current | This attribute specifies the lowest priority alarm that is allowed to generate a fault alarm. mode1, All defects generate alarms after suitable soaking, includ… |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.16 | ColumnzxAnPonOnuCfmMepAlarmDeSoakTime | read-create | current | This attribute defines the defect soak time that must elapse before the MEP declares an alarm. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.17 | ColumnzxAnPonOnuCfmMepAlarmCSoakTime | read-create | current | This attribute defines the defect-free soak time that must elapse before the MEP clears an alarm. |
| 1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.50 | ColumnzxAnPonOnuCfmMepRowStatus | read-create | current | This attribute indicates the operation of the entry. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9 | NodezxAnPonRmOnuOamObjects | |||
| 1.3.6.1.4.1.3902.1082.500.3.2.9.2 | TablezxAnPonRmOnuPppoeTestTable | not-accessible | current | The table lists PPPoE test entry. the entry indicates the test. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.2.1 | RowzxAnPonRmOnuPppoeTestEntry | not-accessible | current | An entry in the zxAnPonRmOnuPppoeTestTable. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.2.1.1 | ColumnzxAnPonRmPppoeTestVid | read-write | current | The VLAN of interface which will be used in testing datagram. 0 means that test will use the PVID of interface. Non-zero value must be within the tagged VLAN l… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.2.1.2 | ColumnzxAnPonRmPppoeTestUsername | read-write | current | The user name.max size is 64 for epon, 25 for gpon |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.2.1.3 | ColumnzxAnPonRmPppoeTestPassword | read-write | current | The password.max size is 32 for EPON, 25 for GPON |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.2.1.4 | ColumnzxAnPonRmPppoeTestAuthMode | read-write | current | The protocol that is used to anthenticate user. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.2.1.5 | ColumnzxAnPonRmPppoeTestAction | read-write | current | The object is used to start or stop test. start(1) - Start the test. stop(2) - Stop the test. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.2.1.6 | ColumnzxAnPonRmPppoeTestStatus | read-only | current | The status of test. Agent need keep this parameter updated so that manager can get the latest status of test by polling. notStarted(1) - test is not started in… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.2.1.7 | ColumnzxAnPonRmPppoeTestFailReason | read-only | current | The failed reason of test. none(1) - no error unknownError(2) - unknown error hardwareNotSupport(3) - Hardware does not support the test. notFindVlan(4) - Spec… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3 | TablezxAnPonRmOnuIpoeTestTable | not-accessible | current | The table lists IPoE test entry. the entry indicates the test. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1 | RowzxAnPonRmOnuIpoeTestEntry | not-accessible | current | An entry in the zxAnPonRmOnuIpoeTestTable. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.1 | ColumnzxAnPonRmIpoeTestAuthMode | read-write | current | IPoE test authentication mode. option60String(1) - authenticate using zxAnPonRmIpoeTestOption60String. usernameAndPassword(2) - authenticate using zxAnPonRmIpo… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.2 | ColumnzxAnPonRmIpoeTestUsername | read-write | current | The user name. This object is valid when zxAnPonRmIpoeTestAuthMode is usernameAndPassword(2). |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.3 | ColumnzxAnPonRmIpoeTestPassword | read-write | current | The password. Max size is 16 for epon and gpon. This object is valid when zxAnPonRmIpoeTestAuthMode is usernameAndPassword(2). |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.4 | ColumnzxAnPonRmIpoeTestClientMac | read-write | current | The IPoE test client MAC address. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.5 | ColumnzxAnPonRmIpoeTestOption60 | read-write | current | The option60 for IPoE test. This object is valid when zxAnPonRmIpoeTestAuthMode is option60String(1). |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.6 | ColumnzxAnPonRmIpoeTestVid | read-write | current | The VLAN id of interface which will be used in testing datagram. 0 means that test will use the PVID of interface. Non-zero value must be within the tagged VLA… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.7 | ColumnzxAnPonRmIpoeTestTimeout | read-write | current | The IPoE test timed out. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.8 | ColumnzxAnPonRmIpoeTestClientIpType | read-only | current | Client IP address type. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.9 | ColumnzxAnPonRmIpoeTestClientIpAddr | read-only | current | The IP address that is distributed by BAS when IPoE test is completed successfully. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.10 | ColumnzxAnPonRmIpoeTestGatewayIpType | read-only | current | The gateway IP address type. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.11 | ColumnzxAnPonRmIpoeTestGatewayIpAddr | read-only | current | The gateway IP address. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.12 | ColumnzxAnPonRmIpoeTestPingTimes | read-only | current | The all times for IPoE test ping gateway. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.13 | ColumnzxAnPonRmIpoeTestPingSucTimes | read-only | current | The successful times for IPoE test ping gateway. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.14 | ColumnzxAnPonRmIpoeTestPingMaxDelay | read-only | current | The maximum delay for IPoE test ping gateway. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.15 | ColumnzxAnPonRmIpoeTestPingMinDelay | read-only | current | The minimum delay for IPoE test ping gateway. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.16 | ColumnzxAnPonRmIpoeTestPingAvgDelay | read-only | current | The average delay for IPoE test ping gateway . |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.17 | ColumnzxAnPonRmIpoeTestAction | read-write | current | The object is used to start or stop test. start(1) - Start the test. stop(2) - Stop the test. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.18 | ColumnzxAnPonRmIpoeTestStatus | read-only | current | The status of test. Agent need keep this parameter updated so that manager can get the latest status of test by polling. notStarted(1) - test is not started in… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.3.1.19 | ColumnzxAnPonRmIpoeTestFailReason | read-only | current | The failed reason of test. none(1) - no error ipoeDiscoverTimeOut(2) - IPoE discover timed out. ipoeRequestTimeOut(3) - IPoE request timed out. ipoeAuthFailed(… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.5 | TablezxAnPonRmOnuVoipCalleeTestTable | not-accessible | current | The table lists callee test entry. The entry indicates a test. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.5.1 | RowzxAnPonRmOnuVoipCalleeTestEntry | not-accessible | current | An entry in the zxAnPonRmOnuVoipCalleeTestTable. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.5.1.1 | ColumnzxAnPonRmCalleeTestDuration | read-write | current | The duration of test. Agent should stop test following regular on-hook procedure, if the test hasn't completed after duration yet. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.5.1.2 | ColumnzxAnPonRmCalleeTestMaxRingTime | read-write | current | The max ring time of test. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.5.1.3 | ColumnzxAnPonRmCalleeTestPortStatus | read-only | current | This object indicates the current status of port. idle(1) - The state of port is idle. ringing(2) - The state of port is ringing. offHook(3) - The state of por… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.5.1.4 | ColumnzxAnPonRmCalleeTestAction | read-write | current | The object is used to start or stop test. start(1) - Start the test. stop(2) - Stop the test. Agent should stop test following regular on-hook procedure. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.5.1.5 | ColumnzxAnPonRmCalleeTestStatus | read-only | current | The status of test. Agent need keep this parameter updated so that manager can get the latest status of test by polling. notStarted(1) - Test is not started. i… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.5.1.6 | ColumnzxAnPonRmCalleeTestFailReason | read-only | current | The failed reason of test. other(1) - Other reason. noRing(2) - No ringing. noUpstreamVoice(3) - No upstream voice. noDownstreamVoice(4) - No downstream voice.… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.5.1.7 | ColumnzxAnPonRmCalleeTestFailDetail | read-only | current | The failed detail. This field should be filled when the value of zxAnPonRmCalleeTestFailReason is 'other'. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6 | TablezxAnPonRmOnuVoipCallerTestTable | not-accessible | current | The table lists caller test entry. The entry indicates a test. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1 | RowzxAnPonRmOnuVoipCallerTestEntry | not-accessible | current | An entry in the zxAnPonRmOnuVoipCallerTestTable. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.1 | ColumnzxAnPonRmCallerTestTimeout | read-write | current | The time-out of test. Agent should stop test following regular on-hook procedure, if the test hasn't completed after time-out yet. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.2 | ColumnzxAnPonRmCallerTestDialedNumber | read-write | current | The number that user dials. The max size is 64 for EPON ,20 for GPON. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.3 | ColumnzxAnPonRmCallerTestPortStatus | read-only | current | This object indicates the current status of port. idle(1) - The state of port is idle. offHook(2) - The state of port is off-hook. dialTone(3) - The port is pl… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.4 | ColumnzxAnPonRmCallerTestDelay | read-only | current | Specifies how long it takes to set up bearer traffic RTP packets for the POTS line being tested in tenths of a second.The delay measure timer starts when the I… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.5 | ColumnzxAnPonRmCallerTestSipFailReason | read-only | current | The failed reason of SIP test. This field should be filled when the value of zxAnPonRmCallerTestFailReason is 'sipTestFailed'. dialToneTestFailure(1) - Dial to… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.6 | ColumnzxAnPonRmCallerTestSipErrorCode | read-only | current | The error code of SIP test. This field should be filled when the value of zxAnPonRmCallerTestSipFailReason is 'errorCodeAndReasonPhrase'. unauthorized(1) - 401… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.7 | ColumnzxAnPonRmCallerTestAction | read-write | current | The object is used to start or stop test. start(1) - Start the test. stop(2) - Stop the test. Agent should stop test following regular on-hook procedure. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.8 | ColumnzxAnPonRmCallerTestStatus | read-only | current | The status of test. Agent need keep this parameter updated so that manager can get the latest status of test by polling. notStarted(1) - Test is not started. i… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.9 | ColumnzxAnPonRmCallerTestFailReason | read-only | current | The failed reason of test. other(1) - Other reason. noDialTone(2) - No dial tone. noRingBack(3) - No ring back tone. noAnswer(4) - No answer. noUpstreamVoice(5… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.6.1.10 | ColumnzxAnPonRmCallerTestFailDetail | read-only | current | The failed detail. This field should be filled when the value of zxAnOnuVoipCallerTestFailReason is 'other'. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.7 | TablezxAnPonRmOnuOTransceiversTable | not-accessible | current | ONU optical transceivers table. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.7.1 | RowzxAnPonRmOnuOTransceiversEntry | not-accessible | current | ONU optical transceivers entry. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.7.1.1 | ColumnzxAnPonRmOnuOTSpeedMode | read-only | current | ONU optical transceivers speed mode. The following values are valid for GPON: gpon(1): GPON, xgpon(2): XG-PON, xgspon(3): XGS-PON, unknown(255): unknown. The f… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.7.1.2 | ColumnzxAnPonRmOnuOTOdnType | read-only | current | ONU optical transceivers ODN type. The following values are valid for GPON: classBplusAndCplus(1): Class B+/C+, n1AndN2aAndE1AndE2a(2): N1/N2a/E1/E2a, n2bAndE2… |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.7.1.3 | ColumnzxAnPonRmOnuOTApplicableDevType | read-only | current | ONU optical transceivers applicable device type. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.7.1.4 | ColumnzxAnPonRmOnuOTEncapsulationType | read-only | current | ONU optical transceivers encapsulation type. sfpAndsfpplus(1): SFP/SFP+, xfp(2): XFP, unknown(255): unknown. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.7.1.5 | ColumnzxAnPonRmOnuOTTxWavelength | read-only | current | ONU optical transceivers transmitted wavelength. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.7.1.6 | ColumnzxAnPonRmOnuOTRxWavelength | read-only | current | ONU optical transceivers received wavelength. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.7.1.7 | ColumnzxAnPonRmOnuOTVendorName | read-only | current | ONU optical transceivers vendor name. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.7.1.8 | ColumnzxAnPonRmOnuOTVendorPn | read-only | current | ONU optical transceivers vendor part number. |
| 1.3.6.1.4.1.3902.1082.500.3.2.9.7.1.9 | ColumnzxAnPonRmOnuOTVendorSn | read-only | current | ONU optical transceivers vendor serial number. |