PEA-VDSL-IPDSLAM
226 objects
The IP DSLAM software supports a number of standard and proprietary MIBs. This MIB module defines objects for the management of a pair of VDSL modems at each end of the VDSL line. For general DSL purposes the ADSL-LINE-MIB (RFC2662 and RFC3440) is used supplemented with the PEA-ADSL-IPDSLAM. The reason for this MIB module is that a new ADSL2/VDSL2 specific ADSL LINE MIB is yet not available from IETF.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.193.72.300.80 | IdentitypeaVdslIpDslam | The IP DSLAM software supports a number of standard and proprietary MIBs. This MIB module defines objects for the management of a pair of VDSL modems at each e… | ||
| 1.3.6.1.4.1.193.72.300.80.1 | NodevdslObjects | |||
| 1.3.6.1.4.1.193.72.300.80.1.1 | TablevdslLineConfPhysVdslLimitingMaskDnTable | not-accessible | current | This table contains information of LimitingMaskDn configuration |
| 1.3.6.1.4.1.193.72.300.80.1.1.1 | RowvdslLineConfPhysVdslLimitingMaskDnEntry | not-accessible | current | An entry in vdslLineConfPhysVdslLimitingMaskDnTable. |
| 1.3.6.1.4.1.193.72.300.80.1.1.1.1 | ColumnlimitingMaskDnNoOfBreakPoints | read-write | current | Number of breakpoints in downstream mask |
| 1.3.6.1.4.1.193.72.300.80.1.1.1.2 | ColumnlimitingMaskDnBpToneIndex | read-write | current | Toneindexes for 32 breakpoints. The octet string has the format: [Bp0_Hi, Bp0_Low....Bp31_Hi, Bp31_Low] Valid range is [0, 4096] |
| 1.3.6.1.4.1.193.72.300.80.1.1.1.3 | ColumnlimitingMaskDnBpPsd | read-write | current | PSD level in 0.1 dBm/Hz for 32 breakpoints. Valid range is [0,-96] dBm/Hz. The octet string has the format: [Bp0_Hi, Bp0_Low....Bp31_Hi, Bp31_Low] |
| 1.3.6.1.4.1.193.72.300.80.1.1.1.4 | ColumnlimitingMaskDnBypassOutbandPsdFilter | read-write | current | If set, the extra filter will be bypassed at the expense of more OOB above 17.5MHz. |
| 1.3.6.1.4.1.193.72.300.80.1.2 | TablevdslLineConfPhysVdslLimitingMaskUpTable | not-accessible | current | This table contains information of LimitingMaskUp configuration |
| 1.3.6.1.4.1.193.72.300.80.1.2.1 | RowvdslLineConfPhysVdslLimitingMaskUpEntry | not-accessible | current | An entry in vdslLineConfPhysVdslLimitingMaskUpTable. |
| 1.3.6.1.4.1.193.72.300.80.1.2.1.1 | ColumnlimitingMaskUpNoOfBreakPoints | read-write | current | Number of breakpoints in upstream mask |
| 1.3.6.1.4.1.193.72.300.80.1.2.1.2 | ColumnlimitingMaskUpBpToneIndex | read-write | current | Toneindexes for 16 breakpoints. The octet string has the format: [Bp0_Hi, Bp0_Low....Bp31_Hi, Bp31_Low] Valid range is [0, 4096] |
| 1.3.6.1.4.1.193.72.300.80.1.2.1.3 | ColumnlimitingMaskUpBpPsd | read-write | current | PSD level in 0.1 dBm/Hz for 16 breakpoints. Valid range is [0,-96] dBm/Hz. The octet string has the format: [Bp0_Hi, Bp0_Low....Bp31_Hi, Bp31_Low] |
| 1.3.6.1.4.1.193.72.300.80.1.2.1.4 | ColumnlimitingMaskUpUseIsdnTypeUS0 | read-write | current | If set it indicates that an ISDN type US0 has to be negociated, else POTS type is used (default). |
| 1.3.6.1.4.1.193.72.300.80.1.3 | TablevdslLineConfPhysVdslBandPlanDnTable | not-accessible | current | This table contains information of BandPlanDn configuration |
| 1.3.6.1.4.1.193.72.300.80.1.3.1 | RowvdslLineConfPhysVdslBandPlanDnEntry | not-accessible | current | An entry in vdslLineConfPhysVdslBandPlanDnTable. |
| 1.3.6.1.4.1.193.72.300.80.1.3.1.1 | ColumnbandPlanDnNoOfToneGroups | read-write | current | Number of bands downstream |
| 1.3.6.1.4.1.193.72.300.80.1.3.1.2 | ColumnbandPlanDnToneGroups0StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.3.1.3 | ColumnbandPlanDnToneGroups0EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.3.1.4 | ColumnbandPlanDnToneGroups1StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.3.1.5 | ColumnbandPlanDnToneGroups1EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.3.1.6 | ColumnbandPlanDnToneGroups2StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.3.1.7 | ColumnbandPlanDnToneGroups2EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.4 | TablevdslLineConfPhysVdslBandPlanUpTable | not-accessible | current | This table contains information of BandPlanUp configuration |
| 1.3.6.1.4.1.193.72.300.80.1.4.1 | RowvdslLineConfPhysVdslBandPlanUpEntry | not-accessible | current | An entry in vdslLineConfPhysVdslBandPlanUpTable. |
| 1.3.6.1.4.1.193.72.300.80.1.4.1.1 | ColumnbandPlanUpNoOfToneGroups | read-write | current | Number of bands downstream |
| 1.3.6.1.4.1.193.72.300.80.1.4.1.2 | ColumnbandPlanUpToneGroups0StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.4.1.3 | ColumnbandPlanUpToneGroups0EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.4.1.4 | ColumnbandPlanUpToneGroups1StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.4.1.5 | ColumnbandPlanUpToneGroups1EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.4.1.6 | ColumnbandPlanUpToneGroups2StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.4.1.7 | ColumnbandPlanUpToneGroups2EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5 | TablevdslLineConfPhysVdslInBandNotchesTable | not-accessible | current | This table contains information of InBandNotches configuration |
| 1.3.6.1.4.1.193.72.300.80.1.5.1 | RowvdslLineConfPhysVdslInBandNotchesEntry | not-accessible | current | An entry in vdslLineConfPhysVdslInBandNotchesTable. |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.1 | ColumninBandNotchesNoOfToneGroups | read-write | current | Number of InBand bands |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.2 | ColumninBandNotchesToneGroups0StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.3 | ColumninBandNotchesToneGroups0EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.4 | ColumninBandNotchesToneGroups1StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.5 | ColumninBandNotchesToneGroups1EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.6 | ColumninBandNotchesToneGroups2StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.7 | ColumninBandNotchesToneGroups2EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.8 | ColumninBandNotchesToneGroups3StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.9 | ColumninBandNotchesToneGroups3EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.10 | ColumninBandNotchesToneGroups4StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.11 | ColumninBandNotchesToneGroups4EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.12 | ColumninBandNotchesToneGroups5StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.13 | ColumninBandNotchesToneGroups5EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.14 | ColumninBandNotchesToneGroups6StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.15 | ColumninBandNotchesToneGroups6EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.16 | ColumninBandNotchesToneGroups7StartTone | read-write | current | Start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.5.1.17 | ColumninBandNotchesToneGroups7EndTone | read-write | current | End tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.6 | TablevdslLineConfPhysVdslRfiNotchesTable | not-accessible | current | This table contains information of RfiNotches configuration |
| 1.3.6.1.4.1.193.72.300.80.1.6.1 | RowvdslLineConfPhysVdslRfiNotchesEntry | not-accessible | current | An entry in vdslLineConfPhysVdslRfiNotchesTable. |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.1 | ColumnrfiNotchesNoOfToneGroups | read-write | current | Number of Rfi bands |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.2 | ColumnrfiNotchesToneGroups0StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.3 | ColumnrfiNotchesToneGroups0EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.4 | ColumnrfiNotchesToneGroups1StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.5 | ColumnrfiNotchesToneGroups1EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.6 | ColumnrfiNotchesToneGroups2StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.7 | ColumnrfiNotchesToneGroups2EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.8 | ColumnrfiNotchesToneGroups3StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.9 | ColumnrfiNotchesToneGroups3EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.10 | ColumnrfiNotchesToneGroups4StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.11 | ColumnrfiNotchesToneGroups4EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.12 | ColumnrfiNotchesToneGroups5StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.13 | ColumnrfiNotchesToneGroups5EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.14 | ColumnrfiNotchesToneGroups6StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.15 | ColumnrfiNotchesToneGroups6EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.16 | ColumnrfiNotchesToneGroups7StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.17 | ColumnrfiNotchesToneGroups7EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.18 | ColumnrfiNotchesToneGroups8StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.19 | ColumnrfiNotchesToneGroups8EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.20 | ColumnrfiNotchesToneGroups9StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.21 | ColumnrfiNotchesToneGroups9EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.22 | ColumnrfiNotchesToneGroups10StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.23 | ColumnrfiNotchesToneGroups10EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.24 | ColumnrfiNotchesToneGroups11StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.25 | ColumnrfiNotchesToneGroups11EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.26 | ColumnrfiNotchesToneGroups12StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.27 | ColumnrfiNotchesToneGroups12EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.28 | ColumnrfiNotchesToneGroups13StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.29 | ColumnrfiNotchesToneGroups13EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.30 | ColumnrfiNotchesToneGroups14StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.31 | ColumnrfiNotchesToneGroups14EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.32 | ColumnrfiNotchesToneGroups15StartTone | read-write | current | Start tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.6.1.33 | ColumnrfiNotchesToneGroups15EndTone | read-write | current | End tone for this Rfi band |
| 1.3.6.1.4.1.193.72.300.80.1.7 | TablevdslLineConfPhysVdslPboPsdUpTable | not-accessible | current | This table contains information of PboPsdUp configuration. Ai and Bi for three upstream bands, not counting US0. A and B are used by the upstream PBO algorithm… |
| 1.3.6.1.4.1.193.72.300.80.1.7.1 | RowvdslLineConfPhysVdslPboPsdUpEntry | not-accessible | current | An entry in vdslLineConfPhysVdslPboPsdUpTable. |
| 1.3.6.1.4.1.193.72.300.80.1.7.1.1 | ColumnvdslLineConfPhysVdslPboPsdUpNoOfToneGroups | read-write | current | Number of tone groups in the descriptor. Maximum is three. Must be equal to the number of upstream bands in the bandplan, not counting US0. |
| 1.3.6.1.4.1.193.72.300.80.1.7.1.2 | ColumnvdslLineConfPhysVdslPboPsdUpGroup0A | read-write | current | A value of US1. A/256 is the actual value and should be in [-40, -80.96]. G.997.1 name: UPBOPSD-pb (per band). |
| 1.3.6.1.4.1.193.72.300.80.1.7.1.3 | ColumnvdslLineConfPhysVdslPboPsdUpGroup1A | read-write | current | A value of US2. A/256 is the actual value and should be in [-40, -80.96]. G.997.1 name: UPBOPSD-pb (per band). |
| 1.3.6.1.4.1.193.72.300.80.1.7.1.4 | ColumnvdslLineConfPhysVdslPboPsdUpGroup2A | read-write | current | A value of US3. A/256 is the actual value and should be in [-40, -80.96]. Should be 0 if noOfToneGroups < 3. G.997.1 name: UPBOPSD-pb (per band). |
| 1.3.6.1.4.1.193.72.300.80.1.7.1.5 | ColumnvdslLineConfPhysVdslPboPsdUpGroup0B | read-write | current | A value of US1. B/256 is the actual value and should be in [-40, 0]. G.997.1 name: UPBOPSD-pb (per band). |
| 1.3.6.1.4.1.193.72.300.80.1.7.1.6 | ColumnvdslLineConfPhysVdslPboPsdUpGroup1B | read-write | current | A value of US2. B/256 is the actual value and should be in [-40, 0]. G.997.1 name: UPBOPSD-pb (per band). |
| 1.3.6.1.4.1.193.72.300.80.1.7.1.7 | ColumnvdslLineConfPhysVdslPboPsdUpGroup2B | read-write | current | A value of US3. B/256 is the actual value and should be in [-40, 0]. Should be 0 if noOfToneGroups < 3. G.997.1 name: UPBOPSD-pb (per band). |
| 1.3.6.1.4.1.193.72.300.80.1.7.1.10 | ColumnvdslLineConfPhysVdslPboPsdUpForceElectricalLength | read-write | current | If set, this electrical length (unit in 0.1 dB) will be enforced by the CO on the CPE, resulting in a predefined US PBO. If !=0, enforce US PBO corresponding t… |
| 1.3.6.1.4.1.193.72.300.80.1.7.1.15 | ColumnvdslLineConfPhysVdslPboPsdUpAdvanced | read-write | current | Enables an alternative UPBOMASK calculation, which differs from the standard G.997.1 PBO mask calculation. |
| 1.3.6.1.4.1.193.72.300.80.1.7.1.20 | ColumnvdslLineConfPhysVdslPboPsdUpDisable | read-write | current | Disable VDSL US power back off, forcing the CPE to use the max US PSD as template. Default not disabled. |
| 1.3.6.1.4.1.193.72.300.80.1.8 | TablevdslLineConfPhysVdslMiscVdslConfTable | not-accessible | current | This table contains information of MiscVdslConf configuration |
| 1.3.6.1.4.1.193.72.300.80.1.8.1 | RowvdslLineConfPhysVdslMiscVdslConfEntry | not-accessible | current | An entry in vdslLineConfPhysVdslMiscVdslConfTable. |
| 1.3.6.1.4.1.193.72.300.80.1.8.1.1 | ColumnmiscVdslConfForceElectricalLength | read-write | obsolete | If set, this electrical length (unit in 0.1 dB) will be enforced by the CO on the CPE, resulting in a predefined US PBO. If !=0, enforce US PBO corresponding t… |
| 1.3.6.1.4.1.193.72.300.80.1.8.1.2 | ColumnmiscVdslConfMaxTxPowerDn | read-write | current | Maximum allowed downstream transmit power. Unit is 0.1 dBm. Valid range [-25.6, 25.6] dBm. |
| 1.3.6.1.4.1.193.72.300.80.1.8.1.3 | ColumnmiscVdslConfDisableBitRateLimitation | read-write | current | Disables the rate limitation. Only to be used for test purposes. Note that disabling the limitation on more lines may lead to a crash. |
| 1.3.6.1.4.1.193.72.300.80.1.8.1.4 | ColumnmiscVdslConfDisableVdslUsPbo | read-write | obsolete | Disable VDSL US power back off, forcing the CPE to use the max US PSD as template. Default not disabled. Substituted by: vdslLineConfPhysVdslPboPsdUpDisable. O… |
| 1.3.6.1.4.1.193.72.300.80.1.8.1.5 | ColumnmiscVdslConfDynamicInterleaverUs | read-write | current | Enable support of dynamic change of interleaver depth in the upstream direction. Note: This field is specific to VDSL2 mode. |
| 1.3.6.1.4.1.193.72.300.80.1.8.1.6 | ColumnmiscVdslConfDynamicInterleaverDs | read-write | current | Enable support of dynamic change of interleaver depth in the downstream direction. Note: This field is specific to VDSL2 mode. |
| 1.3.6.1.4.1.193.72.300.80.1.8.1.7 | ColumnmiscVdslConfDisableProfileBitmap | read-write | obsolete | Bitmap of VDSL2 profiles to be masked The bits are ordered as in G994.1: bit0 = 8a bit6 = 17a Set the respective bit to disable the profile. Note: This field i… |
| 1.3.6.1.4.1.193.72.300.80.1.8.1.10 | ColumnmiscVdslConfEnableProfileBitmap | read-write | current | VDSL2 profiles to be allowed by the near-end xTU on this line. It is coded in a bit map representation (0 if not allowed, 1 if allowed) as defined in G.997.1 (… |
| 1.3.6.1.4.1.193.72.300.80.1.8.1.15 | ColumnmiscVdslConfigStandardLimitMask | read-write | current | Proprietary interface for selecting a predefined standard compliant Bandplan & LimitMask. NOTE that selecting a predefined BandPlan & LimitMask overrides the v… |
| 1.3.6.1.4.1.193.72.300.80.1.9 | TablevdslVtucProprietaryChanXTable | not-accessible | current | VDSL VTU-C Proprietary Channel Extension Table. |
| 1.3.6.1.4.1.193.72.300.80.1.9.1 | RowvdslVtucProprietaryChanXEntry | not-accessible | current | An entry in the vdslVtucProprietaryChanXEntry. |
| 1.3.6.1.4.1.193.72.300.80.1.9.1.1 | ColumnvdslVtucProprietaryChanXI | read-only | current | I is the interleaver block length. Note: This parameter applies to VDSL2 protocols only. |
| 1.3.6.1.4.1.193.72.300.80.1.9.1.2 | ColumnvdslVtucProprietaryChanXG | read-only | current | G is the total number of overhead octets in an overhead superframe. Note: This parameter applies to VDSL2 protocols |
| 1.3.6.1.4.1.193.72.300.80.1.9.1.3 | ColumnvdslVtucProprietaryChanXU | read-only | current | U is the total number of overhead subframes per overhead superframe. Note: This parameter applies to VDSL2 protocols only. |
| 1.3.6.1.4.1.193.72.300.80.1.9.1.4 | ColumnvdslVtucProprietaryChanXF | read-only | current | F is the number of overhead frames in the overhead superframe. Note: This parameter applies to VDSL2 protocols only. |
| 1.3.6.1.4.1.193.72.300.80.1.9.1.10 | ColumnvdslVtucProprietaryChanXTpsTcTypeB0 | read-write | current | The TPC-TC currently used for bearer channel B0. The two channels must use the same TPS-TC configuration, if enabled. |
| 1.3.6.1.4.1.193.72.300.80.1.9.1.15 | ColumnvdslVtucProprietaryChanXTpsTcTypeB1 | read-write | current | The TPC-TC currently used for bearer channel B1. The two channels must use the same TPS-TC configuration, if enabled. |
| 1.3.6.1.4.1.193.72.300.80.1.10 | TablevdslVturProprietaryChanXTable | not-accessible | current | VDSL VTU-R Proprietary Channel Extension Table. |
| 1.3.6.1.4.1.193.72.300.80.1.10.1 | RowvdslVturProprietaryChanXEntry | not-accessible | current | An entry in the vdslVturProprietaryChanXTable. |
| 1.3.6.1.4.1.193.72.300.80.1.10.1.1 | ColumnvdslVturProprietaryChanXI | read-only | current | I is the interleaver block length. Note: This parameter applies to VDSL2 protocols only. |
| 1.3.6.1.4.1.193.72.300.80.1.10.1.2 | ColumnvdslVturProprietaryChanXG | read-only | current | G is the total number of overhead octets in an overhead superframe. Note: This parameter applies to VDSL2 protocols |
| 1.3.6.1.4.1.193.72.300.80.1.10.1.3 | ColumnvdslVturProprietaryChanXU | read-only | current | U is the total number of overhead subframes per overhead superframe. Note: This parameter applies to VDSL2 protocols only. |
| 1.3.6.1.4.1.193.72.300.80.1.10.1.4 | ColumnvdslVturProprietaryChanXF | read-only | current | F is the number of overhead frames in the overhead superframe. Note: This parameter applies to VDSL2 protocols only. |
| 1.3.6.1.4.1.193.72.300.80.1.11 | TablevdslLineStatusPhysVdslBandPlanDnTable | not-accessible | current | This table contains status information of the actual BandPlanDn |
| 1.3.6.1.4.1.193.72.300.80.1.11.1 | RowvdslLineStatusPhysVdslBandPlanDnEntry | not-accessible | current | An entry in vdslLineStatusPhysVdslBandPlanDnTable. |
| 1.3.6.1.4.1.193.72.300.80.1.11.1.1 | ColumnstatusBandPlanDnNoOfToneGroups | read-only | current | Actual number of bands downstream |
| 1.3.6.1.4.1.193.72.300.80.1.11.1.2 | ColumnstatusBandPlanDnToneGroups0StartTone | read-only | current | Actual start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.11.1.3 | ColumnstatusBandPlanDnToneGroups0EndTone | read-only | current | Actual end tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.11.1.4 | ColumnstatusBandPlanDnToneGroups1StartTone | read-only | current | Actual start tone for this statusBand |
| 1.3.6.1.4.1.193.72.300.80.1.11.1.5 | ColumnstatusBandPlanDnToneGroups1EndTone | read-only | current | Actual end tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.11.1.6 | ColumnstatusBandPlanDnToneGroups2StartTone | read-only | current | Actual start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.11.1.7 | ColumnstatusBandPlanDnToneGroups2EndTone | read-only | current | Actual end tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.12 | TablevdslLineStatusPhysVdslBandPlanUpTable | not-accessible | current | This table contains status information of the actual BandPlanUp |
| 1.3.6.1.4.1.193.72.300.80.1.12.1 | RowvdslLineStatusPhysVdslBandPlanUpEntry | not-accessible | current | An entry in vdslLineStatusPhysVdslBandPlanUpTable. |
| 1.3.6.1.4.1.193.72.300.80.1.12.1.1 | ColumnstatusBandPlanUpNoOfToneGroups | read-only | current | Actual number of bands downstream |
| 1.3.6.1.4.1.193.72.300.80.1.12.1.2 | ColumnstatusBandPlanUpToneGroups0StartTone | read-only | current | Actual start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.12.1.3 | ColumnstatusBandPlanUpToneGroups0EndTone | read-only | current | Actual end tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.12.1.4 | ColumnstatusBandPlanUpToneGroups1StartTone | read-only | current | Actual start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.12.1.5 | ColumnstatusBandPlanUpToneGroups1EndTone | read-only | current | Actual end tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.12.1.6 | ColumnstatusBandPlanUpToneGroups2StartTone | read-only | current | Actual start tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.12.1.7 | ColumnstatusBandPlanUpToneGroups2EndTone | read-only | current | Actual end tone for this band |
| 1.3.6.1.4.1.193.72.300.80.1.20 | TablevdslLineConfPhysVdslPboPsdDnTable | not-accessible | current | This table provides a set of line configuration parameters to generate a modified downstream PSD mask for Downstream Power Back-Off - Shaped (DPBOSHAPED). The … |
| 1.3.6.1.4.1.193.72.300.80.1.20.1 | RowvdslLineConfPhysVdslPboPsdDnEntry | not-accessible | current | An entry in vdslLineConfPhysVdslPboPsdDnTable. |
| 1.3.6.1.4.1.193.72.300.80.1.20.1.5 | ColumnvdslLineConfPhysVdslPboPsdDnEsel | read-write | current | This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi… |
| 1.3.6.1.4.1.193.72.300.80.1.20.1.10 | ColumnvdslLineConfPhysVdslPboPsdDnEscmA | read-write | current | This configuration parameter is used to define a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the fr… |
| 1.3.6.1.4.1.193.72.300.80.1.20.1.15 | ColumnvdslLineConfPhysVdslPboPsdDnEscmB | read-write | current | This configuration parameter is used to define a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the fr… |
| 1.3.6.1.4.1.193.72.300.80.1.20.1.20 | ColumnvdslLineConfPhysVdslPboPsdDnEscmC | read-write | current | This configuration parameter is used to define a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the fr… |
| 1.3.6.1.4.1.193.72.300.80.1.20.1.25 | ColumnvdslLineConfPhysVdslPboPsdDnFmin | read-write | current | Defines the minimum frequency from which the DPBO shall be applied. It ranges from 0 kHz to 8832 kHz in steps of 4.3125 kHz. G.997.1 name: DPBOFMIN. Valid from… |
| 1.3.6.1.4.1.193.72.300.80.1.20.1.30 | ColumnvdslLineConfPhysVdslPboPsdDnFmax | read-write | current | Defines the maximum frequency at which DPBO may be applied. It ranges from 138 kHz to 29997.75 kHz in steps of 4.3125 kHz. G.997.1 name: DPBOFMAX. Valid from: … |
| 1.3.6.1.4.1.193.72.300.80.1.20.1.35 | ColumnvdslLineConfPhysVdslPboPsdDnMus | read-write | current | Defines the assumed Minimum Usable receive PSD mask (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX. It shall be coded as an integer… |
| 1.3.6.1.4.1.193.72.300.80.1.20.1.40 | ColumnvdslLineConfPhysVdslPboPsdDnAdvanced | read-write | current | Enables an alternative downstream Power Back-Off, which differs from the standard G.997.1 PBO calculation. |
| 1.3.6.1.4.1.193.72.300.80.1.20.1.45 | ColumnvdslLineConfPhysVdslPboPsdDnEselMin | read-write | current | This configuration parameter defines the minimum value of all trunk line losses of the cable distributors served (including the KVz at the DSLAM site). This pa… |
| 1.3.6.1.4.1.193.72.300.80.1.25 | TablevdslLineConfPhysVdslMibMaskDsTable | not-accessible | current | This table contains information of MibMaskDs configuration in accordance with to G.997.1 section 7.3.1.2.9 |
| 1.3.6.1.4.1.193.72.300.80.1.25.1 | RowvdslLineConfPhysVdslMibMaskDsEntry | not-accessible | current | An entry in vdslLineConfPhysVdslMibMaskDsTable. |
| 1.3.6.1.4.1.193.72.300.80.1.25.1.5 | ColumnmibMaskDsNoOfBreakPoints | read-write | current | Number of breakpoints in downstream mask. Each breakpoint is defined by a subcarrier index (mibMaskDsBpToneIndex) and a PSD level (mibMaskDsBpPsd). G.997.1 nam… |
| 1.3.6.1.4.1.193.72.300.80.1.25.1.10 | ColumnmibMaskDsBpToneIndex | read-write | current | Toneindexes for 32 breakpoints. Each ToneIndex is 2 octets. The octet string has the format: [Bp0_Hi, Bp0_Low....Bp31_Hi, Bp31_Low] Valid range is [0, 4096]. G… |
| 1.3.6.1.4.1.193.72.300.80.1.25.1.15 | ColumnmibMaskDsBpPsd | read-write | current | PSD level in 0.1 dBm/Hz for 32 breakpoints. Each BpPsd has to octets. The octet string has the format: [Bp0_Hi, Bp0_Low....Bp31_Hi, Bp31_Low] Valid range is [0… |
| 1.3.6.1.4.1.193.72.300.80.1.30 | TablevdslLineConfPhysVdslMibMaskUsTable | not-accessible | current | This table contains information of MibMaskUs configuration in accordance with to G.997.1 section 7.3.1.2.12 |
| 1.3.6.1.4.1.193.72.300.80.1.30.1 | RowvdslLineConfPhysVdslMibMaskUsEntry | not-accessible | current | An entry in vdslLineConfPhysVdslMibMaskUsTable. |
| 1.3.6.1.4.1.193.72.300.80.1.30.1.5 | ColumnmibMaskUsNoOfBreakPoints | read-write | current | Number of breakpoints in upstream mask. Each breakpoint is defined by a subcarrier index (mibMaskUsBpToneIndex) and a PSD level (mibMaskUsBpPsd). G.997.1 name:… |
| 1.3.6.1.4.1.193.72.300.80.1.30.1.10 | ColumnmibMaskUsBpToneIndex | read-write | current | Toneindexes for 16 breakpoints. Each ToneIndex is 2 octets. The octet string has the format: [Bp0_Hi, Bp0_Low....Bp15_Hi, Bp15_Low] Valid range is [0, 4096]. G… |
| 1.3.6.1.4.1.193.72.300.80.1.30.1.15 | ColumnmibMaskUsBpPsd | read-write | current | PSD level in 0.1 dBm/Hz for 16 breakpoints. Each BpPsd has to octets. The octet string has the format: [Bp0_Hi, Bp0_Low....Bp15_Hi, Bp15_Low] Valid range is [0… |
| 1.3.6.1.4.1.193.72.300.80.1.35 | TablevdslProprietaryLineConfProfileXTable | not-accessible | current | VDSL Proprietary Line Configuration Profile Extention Table. |
| 1.3.6.1.4.1.193.72.300.80.1.35.1 | RowvdslProprietaryLineConfProfileXEntry | not-accessible | current | An entry in the vdslLineConfProfileXTable. |
| 1.3.6.1.4.1.193.72.300.80.1.35.1.5 | ColumnvdslVtucProprietaryConfXTpsTcType | read-write | current | Configure allowed traffic type: ATM, PTM or both. |
| 1.3.6.1.4.1.193.72.300.80.1.35.1.10 | ColumnvdslVtucProprietaryConfXPreemtionAllowedB0 | read-write | current | If True the subscriber is allowed to send preemptive traffic frames on bearer channel B0. The value can be either True(1) or False(2). |
| 1.3.6.1.4.1.193.72.300.80.1.35.1.15 | ColumnvdslVtucProprietaryConfXPreemtionAllowedB1 | read-write | current | If True the subscriber is allowed to send preemptive traffic frames on bearer channel B1. The value can be either True(1) or False(2). |
| 1.3.6.1.4.1.193.72.300.80.1.40 | TablevdslVtucChanIntervalXTable | not-accessible | current | This table provides extra information in relation to the xdslXtucChanIntervalTable for each VTU-C channel's performance collection interval. XDSL channel inter… |
| 1.3.6.1.4.1.193.72.300.80.1.40.1 | RowvdslVtucChanIntervalXEntry | not-accessible | current | An entry in the vdslVtucChanIntervalXTable. |
| 1.3.6.1.4.1.193.72.300.80.1.40.1.5 | ColumnvdslVtucChanIntervalXPtmCrcErrors | read-only | current | Count of all PTM CRC errors on PTM non-preemtive traffic received on this channel during this interval. |
| 1.3.6.1.4.1.193.72.300.80.1.40.1.10 | ColumnvdslVtucChanIntervalXPtmCrcErrorsP | read-only | current | Count of all PTM CRC errors on PTM preemtive traffic received on this channel during this interval. |
| 1.3.6.1.4.1.193.72.300.80.1.40.1.15 | ColumnvdslVtucChanIntervalXPtmCv | read-only | current | Count of all PTM Coding violations on PTM non-preemtive traffic received on this channel during this interval. |
| 1.3.6.1.4.1.193.72.300.80.1.40.1.20 | ColumnvdslVtucChanIntervalXPtmCvP | read-only | current | Count of all PTM Coding violations on PTM preemtive traffic received on this channel during this interval. |
| 1.3.6.1.4.1.193.72.300.80.1.45 | TablevdslVturChanIntervalXTable | not-accessible | current | This table provides extra information in relation to the xdslXturChanIntervalTable for each VTU-R channel's performance collection interval. XDSL channel inter… |
| 1.3.6.1.4.1.193.72.300.80.1.45.1 | RowvdslVturChanIntervalXEntry | not-accessible | current | An entry in the vdslVturChanIntervalXTable. |
| 1.3.6.1.4.1.193.72.300.80.1.45.1.5 | ColumnvdslVturChanIntervalXPtmCrcErrors | read-only | current | Count of all PTM CRC errors on PTM non-preemtive traffic received on this channel during this interval. |
| 1.3.6.1.4.1.193.72.300.80.1.45.1.10 | ColumnvdslVturChanIntervalXPtmCrcErrorsP | read-only | current | Count of all PTM CRC errors on PTM preemtive traffic received on this channel during this interval. |
| 1.3.6.1.4.1.193.72.300.80.1.45.1.15 | ColumnvdslVturChanIntervalXPtmCv | read-only | current | Count of all PTM Coding violations on PTM non-preemtive traffic received on this channel during this interval. |
| 1.3.6.1.4.1.193.72.300.80.1.45.1.20 | ColumnvdslVturChanIntervalXPtmCvP | read-only | current | Count of all PTM Coding violations on PTM preemtive traffic received on this channel during this interval. |
| 1.3.6.1.4.1.193.72.300.80.1.50 | TablevdslVtucChanPerfDataXTable | not-accessible | current | This table provides extra VTU-C channel information in relation to the adslAtucChanPerfDataTable. VDSL2 channel interfaces are those ifEntries where ifType is … |
| 1.3.6.1.4.1.193.72.300.80.1.50.1 | RowvdslVtucChanPerfDataXEntry | not-accessible | current | An entry in the vdslVtucChanPerfDataXTable. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.5 | ColumnvdslVtucChanIntervalXCurr15MinPtmCrcErrors | read-only | current | Count of all PTM CRC errors on PTM non-preemtive traffic received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.10 | ColumnvdslVtucChanIntervalXCurr1DayPtmCrcErrors | read-only | current | Count of all PTM CRC errors on PTM non-preemtive traffic received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.15 | ColumnvdslVtucChanIntervalXPrev1DayPtmCrcErrors | read-only | current | Count of all PTM CRC errors on PTM non-preemtive traffic blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.20 | ColumnvdslVtucChanIntervalXCurr15MinPtmCrcErrorsP | read-only | current | Count of all PTM CRC errors on PTM preemtive traffic received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.25 | ColumnvdslVtucChanIntervalXCurr1DayPtmCrcErrorsP | read-only | current | Count of all PTM CRC errors on PTM preemtive traffic received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.30 | ColumnvdslVtucChanIntervalXPrev1DayPtmCrcErrorsP | read-only | current | Count of all PTM CRC errors on PTM preemtive traffic blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.35 | ColumnvdslVtucChanIntervalXCurr15MinPtmCv | read-only | current | Count of all PTM Coding violations on PTM non-preemtive received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.40 | ColumnvdslVtucChanIntervalXCurr1DayPtmCv | read-only | current | Count of all PTM Coding violations on PTM non-preemtive received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.45 | ColumnvdslVtucChanIntervalXPrev1DayPtmCv | read-only | current | Count of all PTM Coding violations on PTM non-preemtive blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.50 | ColumnvdslVtucChanIntervalXCurr15MinPtmCvP | read-only | current | Count of all PTM Coding violations on PTM preemtive received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.55 | ColumnvdslVtucChanIntervalXCurr1DayPtmCvP | read-only | current | Count of all PTM Coding violations on PTM preemtive received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.193.72.300.80.1.50.1.60 | ColumnvdslVtucChanIntervalXPrev1DayPtmCvP | read-only | current | Count of all PTM Coding violations on PTM preemtive blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.193.72.300.80.1.55 | TablevdslVturChanPerfDataXTable | not-accessible | current | This table provides extra VTU-R channel information in relation to the adslAtucChanPerfDataTable. VDSL2 channel interfaces are those ifEntries where ifType is … |
| 1.3.6.1.4.1.193.72.300.80.1.55.1 | RowvdslVturChanPerfDataXEntry | not-accessible | current | An entry in the vdslVturChanPerfDataXTable. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.5 | ColumnvdslVturChanIntervalXCurr15MinPtmCrcErrors | read-only | current | Count of all PTM CRC errors on PTM non-preemtive traffic received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.10 | ColumnvdslVturChanIntervalXCurr1DayPtmCrcErrors | read-only | current | Count of all PTM CRC errors on PTM non-preemtive traffic received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.15 | ColumnvdslVturChanIntervalXPrev1DayPtmCrcErrors | read-only | current | Count of all PTM CRC errors on PTM non-preemtive traffic blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.20 | ColumnvdslVturChanIntervalXCurr15MinPtmCrcErrorsP | read-only | current | Count of all PTM CRC errors on PTM preemtive traffic received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.25 | ColumnvdslVturChanIntervalXCurr1DayPtmCrcErrorsP | read-only | current | Count of all PTM CRC errors on PTM preemtive traffic received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.30 | ColumnvdslVturChanIntervalXPrev1DayPtmCrcErrorsP | read-only | current | Count of all PTM CRC errors on PTM preemtive traffic blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.35 | ColumnvdslVturChanIntervalXCurr15MinPtmCv | read-only | current | Count of all PTM Coding violations on PTM non-preemtive received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.40 | ColumnvdslVturChanIntervalXCurr1DayPtmCv | read-only | current | Count of all PTM Coding violations on PTM non-preemtive received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.45 | ColumnvdslVturChanIntervalXPrev1DayPtmCv | read-only | current | Count of all PTM Coding violations on PTM non-preemtive blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.50 | ColumnvdslVturChanIntervalXCurr15MinPtmCvP | read-only | current | Count of all PTM Coding violations on PTM preemtive received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.55 | ColumnvdslVturChanIntervalXCurr1DayPtmCvP | read-only | current | Count of all PTM Coding violations on PTM preemtive received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.193.72.300.80.1.55.1.60 | ColumnvdslVturChanIntervalXPrev1DayPtmCvP | read-only | current | Count of all PTM Coding violations on PTM preemtive blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.193.72.300.80.1.60 | TablevdslLineMiscPhysStatusTable | not-accessible | current | This table contains information of MiscVdslConf configuration |
| 1.3.6.1.4.1.193.72.300.80.1.60.1 | RowvdslLineMiscPhysStatusEntry | not-accessible | current | An entry in vdslLineMiscPhysStatusTable. |
| 1.3.6.1.4.1.193.72.300.80.1.60.1.5 | ColumnmiscPhysStatusVdslProfileBitmap | read-only | current | VDSL2 profiles to be allowed by the near-end xTU on this line. It is coded in a bit map representation (0 if not allowed, 1 if allowed) as defined in G.997.1 (… |
| 1.3.6.1.4.1.193.72.300.80.2 | Nodevdsl2Status | |||
| 1.3.6.1.4.1.193.72.300.80.2.5 | Tablevdsl2SCStatusTable | not-accessible | current | The table vdsl2SCStatusTable contains status parameters of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. This table contains live data from equipment. This table i… |
| 1.3.6.1.4.1.193.72.300.80.2.5.1 | Rowvdsl2SCStatusEntry | not-accessible | current | The table Hfvdsl2SCStatusEntry contains status parameters of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. One index of this table is an interface index where the … |
| 1.3.6.1.4.1.193.72.300.80.2.5.1.1 | Columnvdsl2SCStatusDirection | not-accessible | current | The direction of the sub-carrier either upstream or downstream |
| 1.3.6.1.4.1.193.72.300.80.2.5.1.2 | Columnvdsl2SCStatusSegment | not-accessible | current | The segment of the sub-carriers status information provided by this row. Several status parameters in this table are retrieved in segments. The first segment o… |
| 1.3.6.1.4.1.193.72.300.80.2.5.1.5 | Columnvdsl2SCStatusSnr | read-only | current | The SNR Margin per sub-carrier group, expressing the ratio between the received signal power and received noise power per sub-scriber group. It is an array of … |
| 1.3.6.1.4.1.193.72.300.80.2.5.1.10 | Columnvdsl2SCStatusBitsAlloc | read-only | current | The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. When more then 512 sub-… |
| 1.3.6.1.4.1.193.72.300.80.2.5.1.15 | Columnvdsl2SCStatusGainAlloc | read-only | current | The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carri… |
| 1.3.6.1.4.1.193.72.300.80.3 | Nodevdsl2ProfileChannel | |||
| 1.3.6.1.4.1.193.72.300.80.3.1 | Tablevdsl2ChConfProfileTable | not-accessible | current | The table vdsl2ChConfProfileTable contains DSL channel profile configuration. Entries in this table MUST be maintained in a persistent manner. This table is co… |
| 1.3.6.1.4.1.193.72.300.80.3.1.1 | Rowvdsl2ChConfProfileEntry | not-accessible | current | The table vdsl2ChConfProfileTable contains DSL channel profile configuration. A default profile with an index of 'DEFVAL' will always exist and its parameters … |
| 1.3.6.1.4.1.193.72.300.80.3.1.1.1 | Columnvdsl2ChConfProfProfileName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.193.72.300.80.3.1.1.4 | Columnvdsl2ChConfProfMinResDataRateDs | read-create | current | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if t… |
| 1.3.6.1.4.1.193.72.300.80.3.1.1.5 | Columnvdsl2ChConfProfMinResDataRateUs | read-create | current | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SnmpAdminString | OCTET STRING (SIZE (0..255)) | current | An octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an oct… |
| Vdsl2Direction | INTEGER {upstream(1),downstream(2) } | current | Identifies the direction of a band as being either upstream or downstream. Specified as an INTEGER, the two values are: upstream(1) downstream(2) |